ThanthaiperiyarEle_2026

Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate with continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) (5 points / Coil) Higher End ) etc., complete complying with standard specification and as directed by the departmental officers.

Wiring with 3 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A two way module switch with module front plate with continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with suitable colour for Concealed PVC pipe Stair case Light point Higher End etc., complete complying with standard specification and as directed by the departmental officers.

Wiring with 2 x1.5 sq.mm PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate with continuous earth wire connection of 1.5 sqmm copper wire and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) (6 points / Coil) Higher End etc., complete complying with standard specification and as directed by the departmental officers.

Supply and fixing of 24W LED 2x2 square type Recessed fitting with LED (Higher end) on false Ceiling with suitable hanging support from ceiling with PVC unsheathed copper leads from terminals to the fitting etc., complete complying with standard specification and as directed by the departmental officers.

Supply and fixing of 4 Feet LED 20W Fitting with LED 20W tube (HigherEnd) complete with TW round blocks on wall or ceiling with PVC unsheathed FRLS Copper leads from terminals to the fitting. (Higher end) etc., complete complying with standard specification and as directed by the departmental officers.

Supply and fixing of 4'40 W twin box type fittting complete 2 Nos 4' 20 Watts LED Tube with conduit pipe suspension from ceiling with PVC unsheathed FRLS copper leads from terminals to the fitting with LED Tubes etc., complete complying with standard specification and as directed by the departmental officers.

Supply and fixing of 48W LED street light fitting with LED (Higher end) with 32mm dia. GI pipe (class B) with 1 no.32 mm dia GI bend complete on the existing post/ on wall with PVC unsheathed FRLS copper leads with MS clamps and with painting etc., complete complying with standard specification and as directed by the departmental officers.

Supply and fixing of WT bulk head fitting with guard (Higher end) suitable for 7W/9W LED Bulb etc., complete complying with standard specification and as directed by the departmental officers.

supply and fixing of 1200mm (48") sweep AC ceiling fan High speed complete with 2 module 100W fan step regulator (Higher end) with 600mm down rod on the exisitng fan clamp etc., complete complying with standard specification and as directed by the departmental officers.

Supply and fixing of 1400mm (56") sweep AC ceiling fan complete ( Higher end) with 2 module 100W fan step regulator (Higher end) with 600mm down rod on the exisitng fan clamp etc., complete complying with standard specification and as directed by the departmental officers.

Supply and fixing of 300 mm (12") sweep (light duty) AC exhaust fan complete with necessary wall opening and making good of the wall etc., complete complying with standard specification and as directed by the departmental officers.

Supply and fixing of louvers shuters arrangements for 300mm (12") sweep (light duty) AC exhasut fan etc., complete complying with standard specification and as directed by the departmental officers.

Supply and fixing of 1 nos.16A two module switch with indicator on suitable module surface mounting Box (GI ) with module cover plate (plastic) on wall with connections. Higher End etc., complete complying with standard specification and as directed by the departmental officers.

Supply and fixing of 3nos.6A two module 3 pin socket , 3 nos. 6A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections. Higher End etc., complete complying with standard specification and as directed by the departmental officers.

Supply and fixing of 6/16A two module socket, 16A module switch on suitable module surface mounting Box (GI) with module cover plate (plastic) on wall with connections. (Higher end) etc., complete complying with standard specification and as directed by the departmental officers.

Supply and fixing of TV pin two module on suitable module surface mounting Box (GI) with module cover plate (plastic) on wall with connections. (Higher end) etc., complete complying with standard specification and as directed by the departmental officers.

Supply and fixing of 32A FP MCB 10 KA in suitable sheet steel enclosure on wall with earth connection (Higher end) etc., complete complying with standard specification and as directed by the departmental officers.

Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB as incoming and 6 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only. Higher End etc., complete complying with standard specification and as directed by the departmental officers.

Supply and fixing of 7 segment 4 way TPN MCB sheet steel distribution board (Higher end) with metal / acrylic door cover flush type /surface type fitted with busbars and neutral links with single / three phase MCB outgoings and seperate 4 way provision for accomodating one no. 4 pole incoming MCB / Isolator and another seperate 4 way provision for accomodating one no. 4 pole ELCB / RCD (totally 8 ways in one segment) (3x 4 ways in each segment) and seperate provision for MCB / Isolators ( totally 12 nos.) for sub incomers in 3 segments with lable holder and provison for taking up cable for size not less than 35 sq.mm. with the following in flush with wall with earth connection only.etc., complete complying with standard specification and as directed by the departmental officers. i) 63A 4P MCB - 1 no. ii.)63A 4P 30MA RCCB/ELCB - 1 no. iii.)63A DP MCB Isolator -3 nos. iv.)6A to 32A SP MCB - 12 nos

Supply and fixing of 8 way Vertical Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 63A 4P MCB as incoming and 3 nos. 32A 3P MCB , 15 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only. Higher End etc., complete complying with standard specification and as directed by the departmental officers.

Supply and Erection of 200A capacity Dust and Vermin Proof Cubical Panel Board made up of 16 SWG CRCA steel with supply and fixing of the following interior mounting fuse switches with HRC fuses arranged in two Horizontal rows with one switch over the other with a central bus bar chamber and two nos of cable chambers and confirming to IE rules. (1) 200A FP switch disconnector fuse units interior only with HRC fuses double break - 1 Nos. (Higher end make) (2) 125A TPN switch disconnector fuse units interior only with HRC fuses double break-2 nos (Higher end make) (3) 63A TPN switch disconnector fuse units interior only with HRC fuses double break - 8 nos. (Higher end make) The bus bar chamber will consist of suitable size of tinned copper flat for phase and neutral buses on epoxy moulded bus insulated at proper and sufficient spacing between the buses as per IE Rules. This bus bar chamber should be segregated from the adjacent chamber by providing hylem sheet of suitable thickness as partisans. 2 Nos 25x3mm tinned copper flats should be provided all round the panel for earth bus. The fuse Switches should be connected with the phase and neutral buses with suitable size of rigid copper flat/rod and each switch should be connected with the 2 Nos earth bus with 2 runs of No.8 SWG rigid Tinned copper rod with suitable lugs Phase and neutral tinned buses should be tinned properly.

Supply and run of 2 of 2.5 sqmm PVC insulated SC unsheathed FRLS copper conductor of 1100V Grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 2.5 sqmm PVC insulated sc unsheathed copper wire and making good of the concealed portion with suitable colour.(For 2Nos.6A & 1No.16A Plug) etc., complete complying with standard specification and as directed by the departmental officers.

Supply and run of 2 of 4 sqmm PVC insulated SC unsheathed FRLS copper conductor of 1100V Grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 4 sqmm PVC insulated sc unsheathed copper wire and making good of the concealed portion with suitable colour. (16A plugs and LDB's ) etc., complete complying with standard specification and as directed by the departmental officers.

Supply and run of 4 of 10 sq mm PVC insulated SC unsheathed FRLS copper Conductor of 1100V Grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection of 10 sqmm copper wire with painting of suitable colour etc., complete complying with standard specification and as directed by the departmental officers.

Earthing as per the ISI specification with an earth electrode of 2.1mt class 'B' GI pipe of dia not less than 40mm, with copper earth plate of size 125mm x 50mm x 6mm, with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry etc., complete complying with standard specification and as directed by the departmental officers.

Supply and run of 1 of 8 sqmm PVC unsheathed Cu. Wire for earth connection in PVC Pipe concaled in floor/wall etc., complete complying with standard specification and as directed by the departmental officers.

Supply and fixing of 65 mm dia. (2 -1/2") GI pipe (class B) of 6 metre length with 300mm x 300mm x 6mm MS base plate duly welded at the bottom with concreting with construction of masonary pedestal with suitable SMC box with door arrangement to house 6A SP MCB switch, 2/4 way connector on suitable hylem sheet and supply and fixing of 48W LED street light fitting with LED (Higher end) with 1 metre 32mm dia. GI pipe (class B) Complete with suitable MS clamps for LED steet light fitting and SMC box with PVC unsheathed copper leads from SMC box to fitting and with painting of suitable colour with Coil earth to street light poles with No.8SWG GI wire of 11.5 metres of length in which 10metre softotallength compressed into a coil of one meter length(75mm to100mm dia)connected suitable with hexagonal earth bolt of size 8mm in to 25mm welded on the pole at one end with a coil position fixed on the earth. etc., complete complying with standard specification and as directed by the departmental officers.

Supply and laying of 2x10 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good etc., complete complying with standard specification and as directed by the departmental officers.

Supply and clarnping of 2 x 10 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps etc., complete complying with standard specification and as directed by the departmental officers.

Supply and fixing of brass cable gland for 2 x 10 sq.mm. PVC armoured LTUG cable with earth connection etc., complete complying with standard specification and as directed by the departmental officers.

OUTDOOR PILLER PANEL: Supply and Erection of 315A capacity Dust and Vermin Proof Cubical out door piller Panel Board made up of 16 SWG CRCA sheet steel with double door with supply and fixing of the following interior mounting fuse switch with HRC fuses arrangement in two vertical rows with one switch over the other, with a central bus bar chamber and two ends one on each side next to the fuse switch chamber and cable alloy conforming to IE rules. INCOMER: 315A FP switch disconnector fuse units interior only with HRC fuse Double Break Switch -1 No OUTGOING: 250 A TPN switch disconnector fuse units interior only with HRC fuse Double Break Switch -2 No 125A TPN switch disconnector fuse units interior only with HRC fuse Double Break Switch - 4 Nos Space for fixing 125A switches for future=2nos (All the TPN Switch should be Siemens with Front Handle) The fuse Switches should be connected with the phase and natural buses with suitable size of rigid copper flat/rod and each switch should be connected with the 2 Nos earth bus with 2 runs of No.8 SWG rigid Tinned copper rod with suitable lugs. Phase and neutral tinned buses should be tinned properly.

Supply and fixing of 200 A Three phase 500V 4 Pole Change over Switch on suitable angle iron frame work with MS cable entry boxes with PWD Earthing. etc., complete complying with standard specification and as directed by the departmental officers.

Supply and Laying of 3 1/2 X 120 sq mm PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling te earth make good etc., complete complying with standard specification and as directed by the departmental officers.

Supply and clamping of 3 1/2 X 120 sq mm PVC armoured LTUG cable on post or on wall with MS Clampsetc., complete complying with standard specification and as directed by the departmental officers.

Supply and fixing of brass cable gland for 3 1/2 X 120 sqmm PVC LTUG armoured cable with earth connection etc., complete complying with standard specification and as directed by the departmental officers.

Supply and providing cable end termination of 3 1/2 X 120 sq mm PVC LTUG Aluminum armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete etc., complete complying with standard specification and as directed by the departmental officers.

Supply and fixing of LT cable route indicator with suitable angle not less than 38mm x 38mm 6mm and 0.6mtr long excavation of earth to a depth of 0.6 mtr and concreting the ground level and making good of the ground as directed by the departmental officers etc., complete complying with standard specification and as directed by the departmental officers.

Preparation of site plan, physical layout, electrical line schematic diagram in 10 sets getting drawing approval from CEIG preparation of completion report, rectification report and arranging CEIG inspection and obtaining safety certificate preparation of 1 set of approved drawing and a copy of safety certificate in a neat frame work to be fixed in generator room and payment of CEIG inspection fees etc., complete complying with standard specification and as directed by the departmental officers.

Supply and run of 2 of 1.5 sqmm PVC insulated SC unsheathed FRLS copper conductor of 1100V Grade in suitable PVC rigid pipe concealed in wall and ceiling and making good of the concealed portion with suitable colour etc., complete complying with standard specification and as directed by the departmental officers.

Please Enable Macros to View BoQ information