Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹5.0 LAdmitted-Finance | ₹5.0 L | L1 | Admitted-Finance |
| 2 | L2₹5.0 L+₹1,256.19 (0.25%)Admitted-Finance | ₹5.0 L+₹1,256.19 (0.25%) | L2 | Admitted-Finance |
| 3 | L3₹5.2 L+₹20,617.90 (4.13%)Admitted-Finance | ₹5.2 L+₹20,617.90 (4.13%) | L3 | Admitted-Finance |
| Sl No | Description | Qty | Unit | M/S R T Traders L3 | NIPIN SAH AND BROS L2 | AMAR RANJAN KUMAR L1 |
|---|---|---|---|---|---|---|
| 1.01 | Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of: G.S. Sheet. | 121.8 | Sqm | 72 ₹8,769.6 | 60 ₹7,308 Lowest | 70 ₹8,526 |
| 1.02 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. | 45.04 | Sqm | 90 ₹4,053.6 Lowest | 92 ₹4,143.68 | 90 ₹4,053.6 Lowest |
| 1.03 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer – in – charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix). | 0.96 | Cum | 2,550 ₹2,448 | 2,495 ₹2,395.2 Lowest | 2,500 ₹2,400 |
| 1.04 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.40 mm thick with 20 mm nominal size stone aggregate. | 24.01 | Cum | 1,820 ₹43,698.2 | 1,801 ₹43,242.01 | 1,800 ₹43,218 Lowest |
| 1.05 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade,5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 121.8 | Sqm | 1,750 ₹2,13,150 | 1,698 ₹2,06,816.4 Lowest | 1,700 ₹2,07,060 |
| 1.06 | Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete Ridges plain (500 - 600mm). | 18.8 | Metre | 720 ₹13,536 | 710 ₹13,348 | 700 ₹13,160 Lowest |
| 1.07 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622,of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including grouting the joints with white cement and matching pigment etc., complete. Size of Tile 600x600mm. | 24.01 | Sqm | 2,150 ₹51,621.5 Lowest | 2,210 ₹53,062.1 | 2,200 ₹52,822 |
| 1.08 | Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. | 45.04 | Sqm | 115 ₹5,179.6 Lowest | 120 ₹5,404.8 | 120 ₹5,404.8 |
| 1.09 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia& length (hold fast lugs or dash fastener shall be paid for separately). Kiln seasoned and chemically treated hollock wood. | 0.35 | Cum | 68,000 ₹23,800 | 70,000 ₹24,500 | 65,000 ₹22,750 Lowest |
| 1.10 | Supply and fixing 12 mm thick plywood with suitable screws to walls. | 45.04 | Sqm | 2,820 ₹1,27,012.8 | 2,810 ₹1,26,562.4 | 2,800 ₹1,26,112 Lowest |
Tender Value
₹4.9 L
EMD Value
₹10,000
Closing Date
20 Apr 2026, 10:00 amClosed
SO1 Works HQ 27 Sector AR
HQ 27 Sector Assam Rifles, PIN-932527 C/O 99 APO
Repair and Maint of MT Garage and No.2 Gate Guard Room for HQ 27 Sector Assam Rifles
2026_ARMHA_904612_1
14000/27 Sect AR/Engr-MW/2026-27/02
Open Tender
Civil Works - Buildings
Works
180 days
HQ 27 Sector AR Churachandpur
Repair and Maint of MT Garage and No.2 Gate Guard Room for HQ 27 Sector Assam Rifles
2 documents required · 2 mandatory
₹1,000
Yes
DIG HQ 27 Sector Assam Rifles
₹10,000
Yes
25 Apr 2026
6 Apr 2026
21 Apr 2026
6 Apr 2026
20 Apr 2026
6 Apr 2026
6 Apr 2026 - 20 Apr 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1.01 | Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of: G.S. Sheet. | - | Sqm | - | - |
| 1.02 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. | - | Sqm | - | - |
| 1.03 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer – in – charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix). | - | Cum | - | - |
| 1.04 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.40 mm thick with 20 mm nominal size stone aggregate. | - | Cum | - | - |
| 1.05 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade,5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | - | Sqm | - | - |
| 1.06 | Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete Ridges plain (500 - 600mm). | - | Metre | - | - |
| 1.07 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622,of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including grouting the joints with white cement and matching pigment etc., complete. Size of Tile 600x600mm. | - | Sqm | - | - |
| 1.08 | Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. | - | Sqm | - | - |
| - | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia& length (hold fast lugs or dash fastener shall be paid for separately). Kiln seasoned and chemically treated hollock wood. | - | Cum | - | - |
| - | Supply and fixing 12 mm thick plywood with suitable screws to walls. | - | Sqm | - | - |
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.84 MB
BOQ_950823.xls
BOQ • 0.29 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .