Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹81.7 LAccepted-Finance | ₹81.7 L | L1 | Accepted-Finance L1 |
| 2 | L2₹82.5 LRejected-Finance | ₹82.5 L | L2 | Rejected-Finance L2 |
| 3 | L3₹83.2 LRejected-Finance | ₹83.2 L | L3 | Rejected-Finance L3 |
Tender Value
₹81.7 L
EMD Value
₹81,697
Closing Date
16 Apr 2026, 5:00 pmClosed
Nagar Panchyat Office, Renapur Tq. Renapur
AT Nagar Panchyat Office, Renapur Tq. Renapur
PROPOSED DEVELOPMENT OF NAMO UDYAN AT RENAPUR FOR NAGAR PANCHAYAT RENAPUR
2026_DMA_1293899_1
B1/NPR/2026-27dt08.04.2026
Open Tender
Civil Works
180 days
Nagar Panchyat Office, Renapur Tq. Renapur
Please refer Tender documents.
2 documents required · 2 mandatory
₹10,000
₹81,697
5 May 2026
9 Apr 2026
17 Apr 2026
9 Apr 2026
16 Apr 2026
9 Apr 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount | Item Code |
|---|---|---|---|---|---|---|
| 1 | SUB WORK NO:- 01 PROPOSED INTERNAL PATHWAY AND NAMO WALL AT NAMO UDYAN IN RENAPUR FOR NAGAR PANCHAYAT RENAPUR
Excavation for roadway in earth, soil of all sorts, sand, gravel or soft murum including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m. and spreading for embankment or stacking as directed. | 0.2 | cum | - | - | 1 |
| 2 | Conveying materials obtained from road cutting including all lifts, laying in layers of 20cm to 30cm. breaking clods, dressing to the required lines, curves, grades and section, watering and compacting to not less than 97% of standard Proctor density for a lead of over 50m. to 300m. inclusive from the site of excavation to the site of deposition as directed. | 0.2 | cum | - | - | 2 |
| 3 | Supplying trap/granite/quartzite/gneiss stone metal of required size by bringing the boulders / Rubble at the road side breaking them to required gradation including conveying the boulders /Rubble and stacking the broken metal etc. complete . (Prior approval of sample stack of broken metal by the Ex. Engineer is necessary the date of approval will form part of the measurements) a)40 mm Metal, By breaking Boulders (Hand broken). | - | cum | - | - | 3 |
| 4 | Supplying & stocking on site 6MM CRUSHED METAL FOR BED CONCRETE sub-base etc. complete | 1 | cum | - | - | 4 |
| 5 | Spreading 80/40 mm metal for road work including sectionong etc complete as directed by Engineer in charge . | - | cum | - | - | 5 |
| 6 | Compacting the sub grade / gravel / size metal (100 mm loose) layers for all widths with Power roller having weight 8 to 10 MT. including necessary, labour, materials and artificial watering complete. | - | SQ.M | - | - | 6 |
| 7 | Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC withOUT SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand Artificial Sand | 0.2 | cum | - | - | 7 |
| 8 | Providing and fixing heavy duty inter locking concrete Coloured paving blocks of 60 mm thickness of having a strength of 300 Kilogram/Sq.cm.of approved quality and shape on a bed of crushed sand of 25 to 30 mm thick including skirting joints and cleaning etc. complete | - | SQ.M | - | - | 8 |
| 9 | Providing and laying in situ/ready mix M20 RCC of trap / granite/quartzite/gneiss metal for RCC work of ballast walls, kerb sand box returns including scaffolding, compaction,formwork finishing and curing etc.complete. (excluding reinforcement,with fully automatic microprocessor based PLC with SCADA enabled concrete batch mix plant/pan mixer with fine agreegates of required specifications ( VSI sand finely washed etc ) | - | cum | - | - | 9 |
| 10 | Providing, cutting, bending, hooking, tying and laying in position TMT FE 500 steel bars for reinforcement for all RCC works as per detailed drawings etc. complete. | - | m.t | - | - | 10 |
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.72 MB
BOQ_2223366.xls
BOQ • 0.44 MB
B1.pdf
Tender Documents • 1.84 MB
Download all tender documents and submit your bid