REPAIR TO BOUNDARY WALL, DRAIN, HARDSTANDING AND OTHER REPAIR WORK IN ZONE-I AND ZONE-II OF AGE B/R-II OF GE (I) KANPUR

Amount

Taking down cement plaster on brick or stone walls etc including raking out joints hacking for key scrubing down with water etc complete all as specifed and directed.

Demolition of brick work built in cement mortar complete all as specified and as directed .

Demolition of concrete in ground floors and paving n exc. 15cm thickness (below or above ground level) un-reinforced concrete & removal of rubbish beyond defence land complete all as specified and directed.

Dismantling posts or struts (wood, steel or R.C.C.) embeded in concrete, brick work masonry etc, any section, including taking out embedded portion and making good disturbed portion/ground complete all as specified and directed.

Dismantling wire mesh fencing any type complete all as specified and directed.

Dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Excavating in post holes (or similar holes) in soft/loose soil each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface complete all as specified and directed.

Excavating in trenches, n exc 1.5m wide and n exc 1.5m in depth : for foundation and getting out in any type of soil complete all as specified and directed.

M & L for cement concrete Type D2 (1:4:8) 40mm graded aggregate as in foundations,filling and mass concrete complete all as specified and directed.

M&L for PCC 1:3:6 Type C2 (40mm graded aggregate) as in foundation/post holes complete all as specified and directed.

M&L Brick work with old size flyash bricks straight or curved on plan exceeding 6 mtr mean radius built in cement mortar (1:6) complete all as specified and as directed.

M&L Brick work (except bricks) old size sub class ' B' brick straight or curved on plan exceeding 6 mtr mean radius built in cement mortar (1:6) complete all as specified and as directed.

Providing and fixing precast cement concrete Type B1 (1:2:4) using 20mm graded aggregates in window or door cills or frame, lintels, columns, posts, boundary pillars with plain fair faces, including chamfers,weatherings, throating etc. and setting in cement mortar (1:6) complete all as specified and directed.

Providing and fixing precast cement concrete Type B0 (1:2:4) using 12.5mm aggregates louvres and jallies, 35mm thick (measured solid), including all mouldings but excluding frame complete all as specified and directed.

M&L 15mm thick rendering on fair faces of brick/concrete surfaces in CM 1:4 finished even & smooth complete all as specified and directed.

M & L Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc complete all as specified and directed.

M & L for cement concrete Type B1 (1:2;4) using 20mm graded aggregates in lintets, parapets and copings, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, including necessary formwork complete as specified and directed.

S&F TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete as specified and directed.

M & L for precast cement concrete 1:2:4 type B-1 (using 20mm stone aggregate) as in cover slab for drain including formwork complete all as specified and directed.

S&F Mild steel angle iron for posts and struts as in fencing post including cutting tops to shape as directed, drilling holes, notching for wire, etc ; flat iron fillets (for securing wire mesh etc.) including all necessary drillings, bolting or riveting, etc. and similar confirming to Fe 290 Gde E-165complete all as specified and directed.

S&F mild steel galvanised chain link fencing made of galvanised steel wire dia of wire not less than 2.50 mm of fixed to flat iron rails with RCC/angle iron post all as specified and directed.

S&F Galvanised, 2 strand, steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire staples or steel pins etc complete all as specified and directed (Each line wire to be measured).

M&L for mild steel plain straining bars 10 mm dia cut to length bent to shape required including making hooks at end woven in chain link and fixed with nut and bolts Fe 410 (W)Gde Fe 410-W(Gde E-250) quality -A or Fe-290 (Gde E-165) complete all as specified and directed.

S&F mild steel bolt machine made with hexagonal or square heads at one end and screw the other to be fitted with washer etc and one hexagonal or square not exc 5cm long end dia of neck 12mm including taking out old unserviceable bolts with nuts and washers complete all as specified and directed.

M&L for framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc complete drilled for fixing of steel sheeting or other covering. Doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fitings and hanging also fastening and fixing complete all as specified and as directed. (Fe-290 Gde E-165)

S & F Expanded metal mesh ( weight per square metre n exc 4Kg ), cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members complete as specified and directed.

M & L for preparation of new steel or iron surfaces of any description n exc 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of primer of zinc chrome red oxide complete as specified and directed.

M & L for preparation of new steel or iron surfaces of any description exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over a coat zink chrome red oxide primer complete all as specified and directed.

M&L for preparation of new surfaces of wall and Applying two coats of cement base paint over a coat of primer on wall complete all as specified and directed.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc complete all as specified and directed.

M & L for chequered cement concrete tiles 30cmx30cmx25mm thick set and jointed and pointed in neat cement slurry in floors with grey cement and pigment over and including 15mm thick screed bed in CM(1:6) complete all as specified and directed.

M & L for sand filling under floor or in foundation including watering and in consolidation complete all as speified and directed.

M & L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade with grey cement and pigment (Red & yellow) complete all as specified and directed.

M & L for cement concrete 75mm thick Type C2 (1:3:6) 40mm graded aggregate as in Plinth Protection Sub-bases, Sub-Floors, floors and pavings etc. complete as specified and directed.

M & L for cement concrete 75 mm thick Type B2 (1:2:4) using 20mm graded aggregate as hardstanding, floors and pavings, finished even and smooth etc. complete as specified and directed.

M & L for cement concrete Type B0 (1:2:4) using 12.50 mm aggregate as in edging portion of paver block for proper matching with existing surface complete all specified and directed.

M&L returning, filling in soft/loose soil including, spreading, levelling, watering and well ramming in layers not exc 25cm complete as specified and directed.

M&L removing of surplus material exc 250m but n exc 500m and depositing where directed complete as specified and directed.

Removing of demolished meterial to a distance of 500m or under, beyond the lead included in the rates, including loading, unloading complete all as specified and directed

Ashirwad Contractor and Supplier

M/S MAA TARA TREATMENT PROJECT

PRATAPGARH CONSTRUCTION CO.

Khalil Ahmed and Sons

M/s DKS Engineering Works

M/S BASANT CONSTRUCTION COMPANY

m/s yogesh kumar pandey