CONSTRUCTION OF RESTROOM COMPLEX WITH TOILET, BATHROOM AND URINALS AT AVA HILL (TRG AREA FOR AGNIVEERS) OF MRC WELLINGTON UNDER GE WELLINGTON

Amount

Surface excavation not exceeding 30cm deep and averaging 15cm deep and getting out in soft/ loose soil all as specified and as directed.

Earth work in excavation over areas by mechanical means (Hydraulic excavator) in any kind of soil (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50m and lift upto 1.5m, complete all as specified and directed.

Returning, filling in including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick each in soft/ loose soil, complete all as specified and directed

Removal of excavated surplus soil not exceeding 50 m and depositing where directed at al level not exceeding 1.5 m above the starting point in soft/ loose soil and all as specified and as directed.

Excavating in post holes (or similar holes) each in any type of soil not exceeding 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm thick, watering and removal of excavated materials to a distance not exceeding 50mtr and making good surfaces, complete all as specified and directed

Plain cement concrete 1:4:8 type D2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concreting, complete all as specified and directed.

Use and waste of timber as in formwork to sides of concrete foundations, footings, base of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams, and similar work; vertical or to batter flat surface rough finished complete all as specified and directed.

Reinforced cement concrete (nominal mix) Type B1, 1:2:4 using 20 mm graded stone aggregate as in foundations, including rafts, footing, foundations, beams, plinth beams, bases for columns, etc., basement slabs, under reamed piles and mass concrete etc complete all as specified and directed.

Use and waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions for fair finished surface, square shape of concrete complete all as specified and directed.

Reinforced cement concrete (nominal mix) Type B1, 1:2:4, using 20mm graded stone aggregate as in columns, pillars, piers, posts and struts complete all as specified and directed.

Use and waste of steel Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. Fair finished surfaces of concrete flat complete all as speicified and directed.

Reinforced cement concrete (nominal mix) Type B1 1:2:4 (using 20mm graded stone aggregate) for beams, cantilevers, bressummers, lintels over 1.5m span, complete all as specified and direct

Use and waste of formwork for fair finished surface of chullah hoods, chajjas, trough, fin and similar items including edges all as specified and directed.

Reinforced cement concrete (nominal mix) Type B1 1:2:4 (using 20mm graded stone aggregate) for slab or chajja complete all as specified and directed.

Steel reinforcement for concrete with Mild steel TMT bars grade Fe 500D, 10mm dia and over cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed.

Steel reinforcement for concrete with Mild steel TMT bars grade Fe 550D 5mm dia and over cut and upto and including 10mm dia stirrups, spacers and binders, cut to length, bent to shape required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire (annealed) not less than 0.90mm dia or securing with clips all as specified and directed.

Mild steel works in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle) including distance pieces, cleats etc.conforming to I.S. 1161-1979 grade St-240 etc conforming to FE-290 gde E-165 complete all as specified and directed.

MS base plate, bolts, purpose made, with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, not exceeding 30cm long and n.exc 12mm dia conforming to FE-290 gde E-165 complete all as specified and directed.

Preparation of new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer all as specified and directed.

Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws all as specified and directed.

Pre- painted galvalume aluminum zinc coating GI based Plain steel sheet as in ridge of 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering and on chajjas etc fixed with self tapping screws all as specified and directed.

Pre-cast cement concrete block masnory with solid block type C1 1:3:6 using 20mm graded aggregate exceeding 10cm in width and setting in mortar 1:4 complete all as specified and directed.

Pre-cast cement concrete block masnory with solid block type C1 1:3:6 using 20mm graded aggregate not exceeding 10cm in width and setting in mortar 1:4 complete all as specified and directed.

Rendering 15mm thick in cement mortar 1:6 on fair faces of brick work or concrete wall surfaces, finished surfaces fair and even without using extra cement complete all as specified and directed.

Preparation of newly plastered surface of wall and applying three coats of white wash over a coat of primer complete all as specified and directed.

Rendering 15mm thick in cement mortar 1:4 on brick work or concrete surfaces mixed with liquid water proofing compound as per manufacturer's instructions, finished even and smooth without using extra cement all as specified and directed. Note: Water proofing compound will be measured and paid separately.

Supply only liquid water proofing compound all as specified and directed.

Forming V grooves in plaster not exceeding 10mm deep and not exceeding 10mm on face complete all as specified and directed.

Applying two coats of cement based paint, over a coat of alkali resistant primer including preparation of newly plastered surfaces of wall complete all as specified and as directed.

Spreading levelling layer not exceeding 25cm with soil well ramming with watering filling under floors all as specified and directed.

Hardcore of broken stone or boulders of gauge not exceeding 63 mm, deposited, spread and levelled in layers not exceeding 15cm thick, watered and rammed to a true surface all as specified and directed.

Plain cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate as in sub base to flooring 100mm thick complete all as specified and directed.

25 mm thick Plain cement conncrete 1:2:4, type B-0 using 12.50mm graded stone aggregates as in sub base floors, finished fair and even complete all as specified and directed.

Coloured Non skid ceramic joint free tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:6 for laying floor finishes complete all as specified and as directed.

Coloured Glazed ceramic tiles in vertical surfaces first quality (or approved class, colour and design/ shade) of 450x300x7mm/ 350x250x 7mm / 450x350x7mm thick as in dado/ skirting etc, set and jointed in neat cement slurry and pointed in coloured cement to match with coloured tiles, over and including 10mm thick plaster as backing coat in cement mortar 1:4 on rough finish to receive the tiles complete all as specified and as directed.

75mm thick plain Cement concrete , 1:3:6, type C-2 using 20 mm graded stone aggregate as in plinth protection all as specified and directed.

15 to 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars window cills, cooking platforms and like in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigmet to match with shade of granite all as specified and directed.

Rounding to edges of stone/ granite slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed.

PVC valveless syphonic action type low level flushing cistern 10ltrs capacity white with all internal fittings and CP handles knob/ push including brackets PVC connection 45cm long including nut and PVC washer at both ends with brass chromium plated coupling 32mm bore including 32mm bore PVC long bend flush pipe 90cm long complete all as specified and directed.

Vitreous china wash down water closet pan (pedestal pattern) white/ coloured including traps, connection to drain or outgoing pipe, flushing pipe, anti-syphonage pipe complete including fittings, PVC coloured seat cover and chromium plated jet including PVC connection, fixed complete all as specified and directed.

Vitreous Chinaware squatting pan, ‘Orrisa pattern’ size 580 mm x 440 mm, crystal white, with cast iron ‘P’ or ‘S’ trap, front or back inlet, integral foot rest with provision of plain cement concrete M-15, type B-I using 20 mm graded crushed stone aggregate complete all as specified, incl making connections to trap and to flush pipe, etc and making good to floors to match existing, complete all as specified and directed.

Health foucet (ABS body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 mtr long flexible tube and ABS wall hook including making connection and fixed in position complete all as specified and directed

Vitreous China urinals of crystal white, HALF STALL TYPE URINAL, with 32 mm bore waste fittings, brass, chromium plated with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including spreader, 60mm long brass screws, pointing around urinal back in cement with brackets, flush pipe, trap, grating and Union for discharge pipe. (Including fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and directed.

Vitreous china Counter Wash Hand Basin bowel type fixing accessories, any shape size not less than 550x400 mm including brass chromium plated perforated waste coupling/fittings 32 mm dia with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed, PVC waste pipe of 32 mm bore and of suitable length, 15 mm bore Pillar Tap, cast copper alloy with capstan heads, chromium plated, fancy type, screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe and PVC connection 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed.

Supply and fix 15mm dia 450mm long PVC connection with brass nut and washer complete all as specified and directed.

Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, supplying and fixing in opening as per SSR all as specified and directed.

Factory Made Solid panel PVC door shutter, 28 to 30mm thick (stiles) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded and wood grain printed PVC sheet used instead of Plain colour PVC sheet & 5mm thick x15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm (900 ) used instead of exposed portion of PVC sheetb eadingplain colour PVC sheets for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, suppling and fixing in the frame at site all as specified and directed.

Factory made uPVC door frame made of uPVC. extruded sections having an overall dimension (extruded section profile) 48x40 mm (tolerance ± 1 mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete all as specified by the manufacturer and all as specified and directed.

Supply and fixing 24 mm thick factory made PVC door shutters to existing door frames made of styles and rails of a uPVC hollow section of size 59x24 mm and wall thickness 2 mm (± 0.2 mm) with inbuilt edging on both sides. The styles and rails mitred and jointed at the corners by means of M.S. galvanized/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 20x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of 'H' section, a uPVC hollow section of size 100x24 mm and 2 mm (± 0.2 mm) wall thickness, fixed to the shutter styles by means of plastic/galvanised M.S. 'U' cleats. The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as specified by the manufacturer and as per directions of Engineer- in-charge. (For W.C. and bathroom door shutter) including all fixture and necessary arrengement.

Steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and directed.

Figured glass 4mm thick pin head type and glazing with oil putty in squares not exceeding 0.5Sq.m in each pane all as specified and directed.

stainless steel butt hinges 100 mm long with stainless steel screw complete all as specified and directed.

Extruded aluminum alloy handles of size 150mm fabricated type anodised complete all as specified and directed.

Aluminium alloy anodised barrel tower bolts of extruded section 150 mm long and fixed complete all as specified and directed.

Aluminium alloy anodised barrel tower bolts of extruded section 150 mm long and fixed complete all as specified and directed.

Floor door stopper of 140mm size overall of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.

Aluminium alloy, anodised, sliding door bolt size 300mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

Brass chromium plated tubular towel rails 20mm dia D type 60cm long between flanges with chromium plated bracket and fixed all as specified and directed.

Rotational moulded polyethylene water storage tank 1000 litre capacity (cylindrical vertical double layered with closed top) duly provided with necessary fittings/ fixtures for connecting inlet, outlet, washout and overflow pipes; hoisted and fixed in position including 20mm ball brass valves high pressure with polythene float and fly nut complete all as specified and directed.

Gun metal globe or gate valves, 20mm bore, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

Cutting chases, pinning for concealed water tubing and making good to facing where required and pointing in cement mortar 1:3 ,cutting exceeding 10cm but not exceeding 20cm girth all as specified and directed.

16mm dia 3- layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot and cold water supply all PP-R plain and brass threaded polypropylene random fittings laid in trenches all as specified and directed.

20 mm dia 3- layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply all PP-R plain & brass threaded polypropylene random fittings laid in trenches all as specified and directed.

CP Bib tap 15 mm bore cast copper alloy fancy type crutch or butterfly handles screwed down for iron or for brass ferrule complete all as specified and directed.

Stop valve/ angle valve fancy type, chromium plated, cast copper alloy screwed down,high pressure, with crutch or butterfly handle of 15mm dia. Screwed both ends for iron pipe or for unions and fixed all as specifid and directed.

Stainless Steel Wall Mount Case with Soap Holder and Bruch Holder fixed to wall all as specified and directed.

PVC (SWR) pipes single socketed,110mm bore, in any length with rubber ring joints fixed to wall and floor, complete all as specified and directed.

PVC (SWR) pipes single socketed,75mm bore, in any length with rubber ring joints fixed to wall and floor, complete all as specified and directed.

PVC (SWR) 75mm bore (dia), Bends, any radius with access door and Jointing with Solvent Cement and fixed-in-repairs, complete all as specified as directed.

PVC (SWR) 110mm bore (dia), Bends, any radius with access door and Jointing with Solvent Cement and fixed-in-repairs, complete all as specified as directed.

PVC (SWR) 75mm Bore (dia), junction Single (Single T) Equal or Unequal with access door and Jointing with Solvent Cement and fixed-in-repairs, complete all as specified and directed.

PVC (SWR) 110mm Bore (dia), junction Single (Single T) Equal or Unequal with access door and Jointing with Solvent Cement and fixed-in-repairs, complete all as specified and directed.

PVC (SWR) vent cowl, size of bore 75mm all as specified and directed.

Supply and fix chromium plated grating round suitable for 110 mm dia and connecting up, complete all as specified and directed.

PVC (SWR) floor trap 110 mm dia including jointing with solvent cement complete all as specified and directed.

Extra for forming fair finished drain orchannel 30 cm inner girth in cement concrete, using ex- tra cement, includingforms, moulds, mi- tred/ stopped ends etc. all as specified and directed.

Earth work in excavation by mechanical means (Hydraulic excavator)/ in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m any soil all as specified and directed.

Pre-cast cement concrete block masnory with solid block exceeding 10cm in width and setting in mortar 1:6 type C1 1:3:6 using 20mm graded stone aggregate complete all as specified and directed.

Plain Cement Concrete (1:3:6) type C-1 using 20mm graded stone aggregateas in coping, bed blocks, and Kerbs including necessary form work, weathering, slightly rounded or chamfered angles and throating complete all as specified.

Plain Cement Concrete (1:2:4) type 20 mm graded stone aggregate as in surface channel and drain including necessary form work, weathering, slightly rounded or chamfered angles and throating complete all as specified.

Cement concrete 1:4:8 type D2 using 40 mm graded stone aggrerate as in bed concrete to drainpipes 150 mm bore including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and directed.

Reinforced concrete pipes, class NP2 150 mm dia, laid in trench and in manhole and jointed with collars complete all as specified and directed.

Providing precast cement concrete 1:2:4, type B1 using 20mm graded stone aggregate as in cover slabs (for manholes), and similar articles with plain faces and set in cement mortar 1:4 complete all as specified and directed.

Mild steel round bars 10mm dia and above as in rungs, handles for manhole cover complete all as specified and as directed.

Removing excavated material exc. 500 m but not exceeding 1km and depositing where directed at a level not exceeding 1.5 m above starting point complete all as specified and directed .

Supply only integral water proofing compound complete all as specified and as directed.

Surface excavation not exceeding 30cm deep and averaging 20cm deep and getting out in any type of soil complete all as specified and as directed.

Surface excavation not exceeding 30cm deep and averaging 30cm deep and getting out in any type of soil complete all as specified and as directed.

Plain cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in floors/ paving etc of 100mm thick complete all as specified and directed.

Chequered cement concrete coloured tiles 20 cm x 20 cm x 25 mm thick, with grey cement and pigments, set, jointed and pointed in neat cement slurry in floors, steps etc over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and as directed.

Excavation in trenches not exceeding 1.5M wide and not exceeding 1.5M in depth and getting out in soft/ loose soil for laying of under ground pipe/ cable all as specified and directed.

Supply and lay pipe Galvanized medium class including fittings accessories like, elbow, bend, union, nipple etc of size 25mm (1.5') dia complete all as specified and directed.

Gunmetal gate valve with iron wheel head screwed both ends for iron pipe of size 25mm dia and fixed complete all as specified and directed.

Cutting the existing pipe line of any size and insert the 25mm bore GI pipe fittings i.e Tee reducer existing size to 25mm bore (including fittings) all as specified and directed.

Material and labour for Point wiring complete with 1.5 sqmm (nominal area) FRLS grade PVC insulated, unsheathed stranded copper conductor single core cable 1100 volts grade in and including PVC conduit medium grade in concealed complete with conduit fittings/ accessories including 1.5 sqmm FRLS grade PVC insulated unsheathed stranded copper conductor cable for earth continuity conductor and connected to common earth dolly for One light/Ex-fan point controlled by one switch 5Amps SP all as specified and directed. Note: 1. Sunken box/ Cover plate for modular plate for modular switches, sockets etc will be measured and paid separately under relevant items and blank plate required if any will be deemed included in the item rate. 2. Cutting chases in stone masonry wall will be measured and paid separately.

All as per Item No.97 hereinbefore but point wiring complete with 2.5Sqmm FRLS cable for 3 pin 15 A socket outlet on independent board including 2.5Sqmm FRLS grade PVC insulated unsheathed stranded copper conductor cable for earth continuity conductor all as specified and directed.

Modular socket 6A/16A 2/3 pin combined 230V AC 50 HZ SP two module all as specified and directed.

Modular switch one way 6A 230V AC 50 HZ SP one module all as specified and directed.

Modular switch one way 16A 230V AC 50 HZ SP one module all as specified and directed.

Modular Metal Flush Box 1/2 module rectangular block for mounting, switches, sockets, fan regulator etc. all as specified and directed.

Modular Metal Flush Box 3 module rectangular block for mounting, switches, sockets, fan regulator etc. all as specified and directed.

Modular Metal Flush Box 4 module rectangular block for mounting, switches, sockets, fan regulator etc. all as specified and directed.

Modular Metal Flush Box 6 module rectangular block for mounting, switches, sockets, fan regulator etc. all as specified and directed.

Modular White Cover Plate with Frame 2 module all as specified and directed.

Modular White Cover Plate with Frame 3 module all as specified and directed.

Modular White Cover Plate with Frame 4 module all as specified and directed.

Modular White Cover Plate with 6 module all as specified and directed.

Ceiling rose, 3 terminals PVC / polycarbonate, isolated body all as specified and directed.

Supply and fix 22W LED 125 Lum/Watts 4ft batten comprises of thermally conductive material pre-wired with high efficiency electronic driver, high translucent serrated milky white diffuser gets glare free, smooth light distribution lamp colour white all as specified and directed. Make. HavellsCat Part No. LHEXAWPN7IN1W025 or equivalent make in CG/ Philips / Bajaj.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC 125 Lum/Watt decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. Make - Havells Cat Part No-LHEXACP5IN1W010 / Philips/CG/Orpit

Exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250 mm including making openeing brick/stoan Masaonary Wall as per reqiurement of Exhuast Fan and make good and matching with existing surfaces complete all as specified and directed.

Taking down Submain wiring with aluminium conductor along with PVC Conduit and Material and Labour for Submain wiring with 2 runs of FRLS grade PVC copper conductor cable4 sqmm, multistranded along with FRLS grade PVC insulated copper earth continuity conductor 4 Sqmm drawn through and including PVC Conduit pipe 20 mm dia with all fittings all as specified and directed. Note: 3 runs of cable and one run of conduit pipe together measured as one RM

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, PVC connection piece etc. all as specified and directed.

Material and labour for LED Security Light fitting of 80 Watt comprising of eposy powder coated housing enclosed with glass cover in frame with protection IP 65 complete with all accessories and lamp colour white all as specified and directed. Make: Luker Cat Part No- LSTE080S or equivalent in Philips/ Bajaj/ Havells.

GI Pipe Medium Grade 40 mm bore bracket of suitable size bent to shape of not less than 1.2m long with clamp made of GI flat Iron of size 32 x 6mm for street light fittings, duly painted with one coat of red oxide primer and two coats of aluminium based paint, fixed on poles with bolts, nuts and washers including taking down old brackets complete all as specified and directed.

Supply and fix MCB DB SPN 8 way suitable for three phase 230 volts with 200 Amps rated bus bar, double door type suitable for mounting incoming and outgoing MCB's single / double pole complete all as specified and directed.

Supply and fix 240V, 10 KA 'C' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 32 AMP, in the MCB DB Complete with connection testing and commissioning all as specified and directed.

Supply and fix 240V, 10 KA 'C' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 AMP, in the MCB DB Complete with connection testing and commissioning all as specified and directed.

Earthing complete with galvanized steel earth plate electrode 60 cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 mtrs deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to galvanized earth wire of size 4mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical platee No 3 connected to earth testing point including necessary excavation, earth work, PCC pit, RCC cover 1:2:4 B1 with 8 mm dia MS bars at 100mm c/c, funnel, watering pipe etc. all as specified and directed including testing on completion.

Supply, laying, jointing and testing cable XLPE insulated screened PVC bedded, Galvanised steel strip or wire armoured, electric power cable (heavy duty) 1100 volts grade with stranded aluminium conductor of size 25 Sqmm x 4 Core complete all as specified and directed.

Spreading clean dry riddle sand in trenches as cushioning to under ground cable on top and bottom of cable all as specified and as directed. Note: Punning thickness only measured for payment.

Supplying and laying reinforced precast concrete cable cover,Class LV, Type I, flat, size 250mm x 150mm x 40mm as protection to cable all as specified and directed.

GMS Builders (BID ID -3495426)

ACE PROMOTERS (BID ID -3495160)

Shree Amritha builders (BID ID -3495126)

K.AYYAPPAN (BID ID -3495138)

KRA Engineering and Construction (BID ID -3495238)

VVM CONSTRUCTIONS (BID ID -3495286)

SIVAN BUILDERS (BID ID -3494866)