REPAIR REPLACEMENT OFCERTAIN REPAIR TO FIRE PUMP MOTORS FIRE HYDRANTS DEFECTED RUSTED WATER PIPE LINES ALONG WITH CONNECTED WORKS AT VARIOUS LOCATIONS RECENTLY RECEIVED FROM CCE RND AND ETC UNDER GE I RCI RND RCI HYDERABAD

Amount

S&F in repairs, gun metal Hydrant landing valve of size 63mm, single head outlet with hose coupling adaptor of size 63mm size instantaneous spring locks arrangements and blank cap complete as per IS-5290 type 'A' all as specified and directed.

All as per item No 1 but for type 'B', double head outlet. Make for item No 1 & 2 : ALLIED/ NEW AGE INDUSTRIES / SAFEX / NITIN /KARTAR/WINCO

S&F in repairs, stand post made out of mild steel pipe of size 80mm dia heavy grade of 1.2m height and providing necessary flanges at both ends suitable for fire hydrant single out let including flanged reducer and other fittings suitable for stand post with necessary welding to existing pipe including earthwork in any type of soil complete all as specified and directed.

S&F in repairs, cotton synthetic fibre reinforced rubber line of size 63mm dia 15m length conforming to IS 636 with male and female couplings conforming to IS 903 duly housed in fire hose box complete all as specified and directed.

S&F in repairs, hose box of size 750 x 600 x 250mm outdoor type made out of 1.2mm thick mild steel sheet with frosted glass doors, lock and key arrangement including stand for the hose box made out of 80mm dia medium grade mild steel pipe, 1.50m height, welded at top and bottom with 6mm mild steel plate, duly embedded in PCC 1:2:4 type B1 using 20mm graded stone aggregate and painted as per fire code, the hose box shall be installed near the hydrant by providing 2 Nos of cotton synthetic fibre reinforced rubber line of size 63mm dia 15m length with male and female couplings duly housed in fire hose box complete all as specified and directed.

Complete removal of existing paint from existing fire hydrant stand post of any size and type at vaious location of RCI and applying two coats of synthetic enamel paint over a coat of primer as per colour code including writing 8cm size letters in white colour (FIRE) complete all as specified and directed.

All as per item No 6 above but for Hose boxes

Taking up or down CI/DI pipes with all pipe fittings from trenches, supports etc., complete all as directed for the 200mm dia sizes.

All as per item No 8 above but for 150mm dia

All as per item No 8 above but for 100mm dia

All as per item No 8 above but for 80mm dia

Supply, laying welding, fixing, leak proof testing and commissioning of 200mm bore, medium grade mild steel ERW pipes conforming to IS 3589 with bitumen wrap coating over the external surface of the pipe including necessary specials/fittings and taking down old unserviceable pipe complete all as specified and directed. Note: Excavation and earthwork will be measured and paid seperately.

All as per item No 12 above but for 150mm bore of pipe

All as per item No 12 above but for 100mm bore of pipe but conforming to IS 1239

All as per item No 12 above but for 80mm bore of pipe but conforming to IS 1239 Make for item No 12 to 15: TATA, JINDAL, PRAKASH

Supply, install, test and commissioning of 200mm bore CI Sluice Valve in repairs, Class PN-1.6, both ends flanged and drilled type with stainless steel spindle including wheel, suitable rubber gasket for flanged joints, ISI marked, including provision of necessary jointing materials nuts and bolts, washers etc., complete all as specified and directed.

All as per item No 16 above but 150mm bore Sluice Valve.

All as per item No 16 above but 100mm bore Sluice Valve.

All as per item No 16 above but 80mm bore Sluice Valve. Make for item No 16 to 19: KIRLOSKAR, LEADER, L&T, ZOLOTO, KARTAR

Supply, install, test and commissioning of 200mm bore Butterfly valve, ISI marked, including provision of necessary jointing materials nuts and bolts, washers etc., Including taking down old unsv one complete all as specified and directed.

All as per item No 20 above but 150mm bore Butterfly Valve

All as per item No 20 above but 100mm bore Butterfly Valve

All as per item No 20 above but 80mm bore Butterfly Valve Make for item No 20 to 23: KIRLOSKAR, LEADER, L&T, ZOLOTO, KARTAR

S&F in repairs Non return valve suitable for 50mm bore pipe heavy duty cast iron body including necessary fittings, packing material, nuts and bolts etc., complete all as specified and directed. Make : Kirloskar/ZOLOTO/Kartar

All as per item No 24 above but 80mm bore Non Return Valve.

All as per item No 24 above but 100mm bore Non Return Valve.

All as per item No 24 above but 150mm bore Non Return Valve.

Supply and fixing Danfoss Pressure switch Model No KP36 regulation range 2 to 14 bar pe complete all as specified and directed

Supply and fixing PVC Fire Hydrant Coupling Ring washers of size 63mm

Excavation in trenches not exceeding 1.50m wide and not exceeding 1.50m depth for foundation, for laying of pipes/cables/poles etc., forming bottom surfaces to required slope/gradient where pipe are laid and getting out in any type of soil complete all as specified and directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25cm thick each layer as in soil complete all as specified and as directed.

Removing excavated material/soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed.

M&L for Bailing out the water from the semi underground static water tank of 1,35,000 litres capacity without causing any interruption to regular water supply system and cleaning the walls, roof and floor thoroughly by using scrapper and removing the deposited scales/ fungus/ sludge/dirt etc and removing the same out of site, cleaning thoroughly with water and bleaching powder and finally with chlorine solution for complete anti bacterial disinfections including writing date of cleaning on the black back ground with white synthetic enamel paint complete all as directed.

M&L in repairs, Earthing complete with galvanized steel earth plate electrode of size 600 x 600 x 6mm thick buried directly in ground (earth pit not less than 2.25m deep below the normal ground level) with top edge of plate not less than 1.5m below normal ground level connected to GI strip 25x4mm as earth lead by means of bolts, nuts, washers and check nuts made out of galvanized iron or steel all as shown on Electrical Plate No. 3 of SSR Part-I including testing on completion complete all as specified and directed by Eng-in-charge.

M&L in repairs, Earthing complete with galvanized steel earth plate electrode of size 600 x 600 x 6mm thick buried directly in ground (earth pit not less than 2.25m deep below the normal ground level) with top edge of plate not less than 1.5m below normal ground level connected to GI strip 25x4mm as earth lead by means of bolts, nuts, washers and check nuts made out of galvanized iron or steel all as shown on Electrical Plate No. 3 of SSR Part-I including testing on completion complete all as specified and directed by Eng-in-charge.

Supply and fixing of 25x4mm galvanised iron strip including connection with suitable size of nut bolt complete all as specifed and directed

Dismantling and strip opening the Diesel pump set of capacity 15/25/30 HP including disconnecting the suction, delivery, vaccum pipe lines and coupling for repairs to pump and refixing the same after repairs including overhauling the Engine,B check, Changing of engine oil, etc as required ,arresting any kind of water leakages including testing and commissioning complete all as specified and directed for the following capacities as mentioned below :

Dismantling and strip opening the Jockey pump set of capacity 15/25/30 HP including disconnecting the suction, delivery, vaccum pipe lines and coupling for repairs to pump and refixing the same after repairs including overhauling the pump set, renewal of gasket to pump suction and delivery lines, gland packing, greasing nuts, bolts and washers,Metal Sleeves, painting ,all kind of grinding & welding work , etc as required for arresting any kind of water leakages including testing and commissioning complete all as specified and directed for the following capacities as mentioned below :

Dismantling and strip opening the centrifugal/ monoblock pump including disconnecting the suction, delivery, vaccum pipe lines and coupling for repairs to pump and refixing the same after repairs including overhauling the pump set, renewal of gasket to pump suction and delivery lines, gland packing, greasing nuts, bolts and washers,Metal Sleeves, painting ,all kind of grinding & welding work , etc as required for arresting any kind of water leakages including testing and commissioning complete all as specified and directed for the following capacities as mentioned below :

Pump 3 phase 75 HP Capacity.

Pump 3 phase 60 HP Capacity.

Pump 3 phase 25 HP Capacity.

Pump 3 phase 7.5 HP Capacity.

Dismantling and strip opening the centrifugal/ INDUCTION motor including disconnecting the cable connections and coupling of the motor, removing the starter and rotor units, bearings, servicing the motor assembly including cleaning the carbon deposits with carbon tetra chloride, and refixing the same after repairs including connecting up of the electric connections including testing and commissioning complete all as specified for the following capacities :-

Motor 3 Phase, Capcity 75 HP

Motor 3 Phase, Capcity 60 HP

Motor 3 Phase, Capcity 25 HP

Motor 3 Phase, Capcity 7.5 HP

M&L for rewinding the centifugal/ Monoblock electric motor stator or rotor with PVC insulated, super enamelled copper conductor with ‘F’ class heavy grade insulation weight and turns to achieve its full efficiency inclduing tying the winding and connecting the coils and brining the connections as that of exisitng one including applying insulating varnish, heating and backing the windings thoroughly including taking down old existing copper winding complete all as specified and directed of following capacities :-

Stator winding of Electric motor, 3 phase,75 HP capacity.

Stator winding of Electric motor, 3 phase, 60 HP capacity.

Startor Winding of Electric Motor, 25 HP capacity.

Startor Winding of Electric Motor, 7.5 HP capacity.

Supply only the spare part of DRIVE / Non Drive End Bearing suitable for make of motor existing at site as in repairs for the following capacities of motors complete all as specified and directed :-

Motor, 3 phase, capacity 75 HP .

Motor, 3 phase, capacity 60 HP .

Motor, 3 phase, capacity 7.5 HP.

Supply only the ball bearing/roller bearing (For DRIVE/ Non-Drive End) suitable for make of pump existing at site for repairs of the following capacities of pumps complete all as specified and directed :-

Pump 3 phase 75 HP capacity.

Pump 3 phase 60 HP capacity.

Pump 3 phase 7.5 HP capacity.

Supply and fixing impellor of 75HP pump motor as that of existing make and model including applying grease complete all as specified.

All as per item No 44 above but 60 HP Pump.

All as per item No 44 above but 25 HP Pump.

PAll as per item No 42 above but 7.5 HP Pump.

Supply and fixing pump shaft of 75 HP pumpset as that of existing make and model including applying grease complete all as specified.

All as per item No 48 above but 60 HP Pump.

All as per item No 48 above but 25 HP Pump.

All as per item No 48 above but 7.5 HP Pump.

Supply only the spare part of DRIVE / Non Drive End Bearing suitable for make of motor existing at site as in repairs for the following capacities of motors complete all as specified and directed :-

Motor, 3 phase, capacity 20 to 40 HP .

Motor, 3 phase, capacity 10 to 15 HP .

Motor, 3 phase, capacity 3 to 5 HP.

Supply only the ball bearing/roller bearing (For DRIVE/ Non-Drive End) suitable for make of pump existing at site for repairs of the following capacities of pumps complete all as specified and directed :-

Pump, fitted with 3 phase motor of capacity 20 to 40 HP .

Pump, fitted with 3 phase motor of capacity 10 to 15 HP.

Pump, fitted with 3 phase motor of capacity 3 to 5 HP.

Supply and fixing impeller of 20 to 40 HP pump motor as that of existing make and model including applying grease complete all as specified.

All as per item No 54 above but 10 to 15HP Pump.

All as per item No 54 above but 3 to 5 HP Pump.

Supply and fixing pump shaft of 20 to 40HP pumpset as that of existing make and model including applying grease complete all as specified.

All as per item No 57 above but 10 to 15HP Pump.

All as per item No 57 above but 3 to 5 HP Pump.

Supply ,install, testing and commissioing 40 HP Centrifigual pump set ,150mm (suction head)X (100 mm delivary head)with electric induction motor three phase AC 415 volts ,50hz, 1500RPM having minium disharge 1000LPM at 70 Mtr head including all inter connections through EWR/MS pipe of suitable size and lengh complete with fittings like Bend, Tees ,Sockets or as required at site along with complete all as specified and directed

S&F , 3 pole power contractor with AC coil suitable for 30 HP including taking down old unsv one complete all as specified and directed. Make C&S of Cat Part TC1D4011/L&T/Seimens

S&F , 3 pole power contractor with AC coil suitable for 50 HP including taking down old unsv one complete all as specified and directed. Make C&S of Cat Part TC1D6511/L&T/Seimens

S&F , Thermal overload relays suitable for 30 HP including taking down old unsv one complete all as specified and directed. Make C&S of Cat Part TR2D40/L&T/Seimens

S&F , Thermal overload relays suitable for 50 HP including taking down old unsv one complete all as specified and directed. Make C&S of Cat Part TR2D65/L&T/Seimens

Supply and fixing of ML3 DOL Starter suitable for 30HP Motor, 22.5 KW and relay max range 28-42 Amp including taking down old unsv one complete all as specified and as directed. Make L& of Cat part SS90722/C&S /Siemens

S&F in repairs, Star delta Starter in sheet steel enclosure, max motor output at 415volts 3 phase of upto 15HP, complete all as specified and directed.

Supply and fixing of DOL Starter suitable for upto 7.5 HP Motor, 5.5 KW and relay max range 20-32 Amp as in repairs complete all as specified and as directed.

Supply and replace thermal over load relay in existing DOL starter of capacity 5hp/7.5 HP as per existing relay range complete all as directed.

Supply and fixing of single phase preventer suitable for upto 7.5 HP motor as in repairs complete all as specified and as directed. Make : L&T / Havell/MINILAC as approved by GE.

Supply and fix on wall mounted name plate of motors by using acrylic sheet 3 mm thick of size 45 CM X30 CM mentioning Office name , capacity of motors, Sl Number , mes No, date of installation etc by using colour strip complete all as directed by Engineer -in -Charge

Supply and fix in replacement of MS cover made out of 5mm thick MS sheet with double hinges and suitable handle locking arrengement etc complete including two coats of synthetic enamel paint and one coat of red oxide primer all as complete and directed by Engr-in-Charge.

Dismantling the damaged / unserviceable step ladder and design, fabricate supply & fix / install step ladder made out of angle iron, solid iron/hollow rod/MS flats of suitable size with length as required as per site requirement and with the step gap of minimum 10 inch including welding , cutting, drilling etc matching grouting arrangement including making good to the disturbed surfaces and painting the step ladder with the two coats of synthetic enamelled paint over a coat of metal primer complete all as specified and directed by Engineer-in- Charge.

Supply ,install, testing and commissioing 25 HP Centrifigual pump set ,100mm (suction head)X (80 mm delivary head)with electric induction motor three phase AC 415 volts ,50hz, 1500RPM having minium disharge 1000LPM at 50 Mtr head including all inter connections through EWR/MS pipe of suitable size and lengh complete with fittings like Bend, Tees ,Sockets or as required at site along with complete all as specified and directed

BHAGYARAM ENTERPRISES (BID ID -3497923)

S.S.ENGINEERING CORPORATION (BID ID -3490984)

CHAVA CONSTRUCTIONS AND ELECTRICAL PROJECTS (BID ID -3491754)

omsai thermax engineers (BID ID -3498207)

M/S K.SANJEEVA REDDY (BID ID -3497871)

ELEVATORS MAINTENANCE ENGINEER WORKS (BID ID -3492308)

Anjana corporation (BID ID -3492459)

Indu Electricals (BID ID -3497941)