M.O.E.I. and fans at ISBTs.

Amount

Designing, Fabricating, supplying, installation, testing and commissioning of LED name board of following sizes on existing MS frame structure fabricated out of 3 MM thick Aluminum Composite Panel Board of exterior grade in required colour having internal frame made out of 25mmx25mmx16 SWG MS square pipe duly welding & painting, fixing of bilingual inscription in HINDI & ENGLISH as required made of 3D Aluminum Channel Letters fixed with translucent unbreakable polycarbonate 3 mm thick sheet, backlit lighting arrangement with suitable numbers of SAMSUNG Chip LED SMD modules IP 65 rating having 3 nos. LED in each module ( rating of one module shall be 1.4 W 12 V DC) and life of minimum 50000 working hours i/c suitable numbers of water proof SMPS power supply IP 67 rating having input of 170-250 volts Ac and out put of 12 volts DC etc. complete as required as per specification attached. (a) 100 feet x 10 feet (approximate tentative size), having letters height of minimum 30 inches (NS) running height & of 75 mm (NS) raising width on sides or in proportionate to the size of board --2 Nos.

(b) 60 feet x 10 feet (approximate tentative size) having letters height of minimum 24 inches(NS) running height & of 75 mm (NS) raising on sides or in proportionate to the size of board --1 Nos.

(c ) 40 feet x 6 feet (approximate tentative size) having letters height of minimum 14 inches(NS) running height & of 75 mm (NS) raising on sides or in proportionate to the size of board --2 Nos.

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade Two or more coats on new work

Centering and shuttering including strutting, propping etc. and removal of form work for Columns, piers, abutments, pillars, posts and struts

Providing and laying cement concrete in 1:2:4 (1 Cement : 2 coarse sand derived from natural sources : 4 graded stone aggregate 20 mm nominal size.

Providing 20 mm cement plaster mix with fine sand in 1:4 (1 cement: 4 fine sand)

Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design.

JYOTI TRADING COMPANY