Construction of PWD Rest House at Devsar Kulgam

Main Building

Felling trees of the girth (measured at a height of 1 m above ground level) including cutting of trunk and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material. Beyond 30 cm girth upto and including 60 cm girth.

Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil :

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Supply and filling gsb under floor including watering , ramming and consolidating with hand rammer with aggregates size not exceeding 90mm including cost and carriage of all materials involved upto site of work all complete

Providing and laying of stone soling laid dry hard packed tightly including all carriages complete

Dry random rubble masonry with hard stone in foundation and plinth: Without bond stone NALLAH incld: all carriages

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

Providing and laying in position Reinforced cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement :2 coarse sand: 4 graded stone aggregate 20 mm nominal size)

Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-incharge. Note: - Cement in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is content considered payable or recoverable separately

All work upto plinth level

All work above plinth level upto floor -v level

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto all levels. Fe-500D TMT bars

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth and curing complete

Centering and shuttering including strutting, propping etc. and removal of form work for:

Foundations, footings, bases for columns

Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.

Columns, pillars, piers, abutments, posts and struts.

Lintel, beams, plinth beams, girders, bressumers and cantilevers.

Suspended floors, roofs, landings, balconies and access platforms.

Stairs except spiral staircases

Providing and laying autoclaved aerated cement blocks masonry with150mm/230mm/300 mm thick AAC blocks in super structure above plinth level up to floor V level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar all complete as per direction of Engineer-in-Charge. (The payment of RCC band and reinforcement shall be made for separately).

Providing and fixing factory made uPVC white colour casement/ Casement cum fixed glazed door comprising of uPVC multi-chambered frame, sash andmullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2mm thick galvanized mild steel section made from roll forming process ofrequired length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along withzinc plated mild steel multi point locking having transmission gear, cylinderwith keeps and one side key, G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws, etc. Profile of frame & sashshall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rodof required size and of approved quality, all complete as per approved drawing including all necessary fixtures & direction of Engineer-in-Charge. (Single / double glass panes and siliconsealent shall be paidseparately). 2 Casement door with top hung ventilator with 3D and S.S. frictionhinges (400 x 19 x 1.9 mm) made of (big series) frame 67 x 64 mm, sash 67 x 110 mm & mullion 67 x 80 mm all having wall thickness of 2.3 ±. 0.2 mm and single glazing bead / double glazing bead of appropriate dimension.(Area ofdoor upto 2.50 sqm)

Providing and fixing factory made uPVC white colour casement/ Casement cum fixed glazed door comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws, etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing including all necessary fixtures & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealent shall be paid separately).

Providing and fixing Toughened 5mm glass panes with glazing clips in UPVC doors, windows, clerestory windows, Incl necessary sealents gaskets etc all complete

15mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 4 ( 1 cement : 4 fine sand)

6 mm Cement plaster of mix: 1 : 3 ( 1 cement : 3 fine sand) ceilings

Providing and applying Plaster of Paris putty (Wall putty) of 2mm thickness over plastered surface to prepare the surface even and smooth complete

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 2 mm thick

Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels Granite of any colour or shade (Area of slab upto 0.5 sqm)

Providing edge moulding to 18 mm/16 mm thick marble stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite Work

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 50 mm thick with 20mm nominal size stone aggregate.

Providing and laying anti skid Vitrified floor tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand and manufacturer, in all colours and shades, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). Size of tile 600x600 mm

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes channels, plates etc. including welding ,grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete ,including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound) content less than 50 grams/ liter of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Two coats

Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Welded

Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, M.S. tube including priming coat with approved steel primer all complete.

Painting steel work with deluxe multi surface paint of required shade to give an even shade. Two or more coats applied @ 0.90litre/10sqm over an under coat of primer applied @ 0.80litre/10sqm of approved brand and manufacture

Providing and fixing with High rib colored profile sheet roofing including vertical/curved surface including polymer coated J. or L hooks,fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters 0.50mm Thick

Providing coloured ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete. 0.63 mm thick with zinc coating not less than 275 gram/m2

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm . This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry upto 1 metre of walls height

Supply and fixing of following sizes of medium class PVC conduit along with acessories in surface/ recess including cutting the wall and making good the same in case of recesses conduit as required. 25 mm

Supply and fixing metal box of following size on surface or in rccess with suitable size of phenolic lainated sheet cover in fronnt including painting etc as required.

75x75x60 mm deep

fan boxes

Supply and fixing metal box of following size on surface or in rccess with suitable size of phenolic lainated sheet cover in fronnt including paintiProviding and fixing app modified pre-fbricated five layer 3 mm water proof membrane black finished reinforced with glass / polyester fibrre mat including priming coating and torch applicationng etc as required.

Carraige of materials by mechanical transport from source to site of work incl loading and unloading complete

Sand -Avg 10km

Aggregate -Avg 10km

AAC Blocks -Avg 50km

site development

site clearence by means of Jcb for removel of debris from site , unhygenic material etc

Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil :

RBM , WBM & Macdamisation

Supplying and filling of RBM Including spraeding, watering, dressing etc complete, incld all carriage.

Supplying and stacking of graded stone agg. at site of size range (63 – 45)mm Quarry

Supplying and stacking of stone screenings/chippings at site, excluding carriage 13.2mm nominial size:-

Supplying and stacking of stone dust at site:-

Laying Water bound macadam with specified stone aggregate stone screening and binding material including sicreening, sorting,spreading to template and consolidation with PRR of 8-10 tonne capacity etc,complete (Payment for stone aggregate, screenings, kankar, moorum and red Bajree etc to be made separately) Base course with 63-45mm size incld: stone screenings 13.2mm size

Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to 0.075 mm ) to wet mix macadam (WMM) specification including premixing the material with water at OMC in mechanical mix plant, carriage of mixed material by tipper to site, for all leads & lifts, laying in uniform layers with mechanical paver finisher in sub- base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge

Providing and applying tack coat using hot straight run bitumen of grade –VG-10, including heating the bitumen, spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler, cleaning and preparing the existing road surface as per specifications. On W.B.M. @ 0.75 Kg/sqm.

Providing and laying bituminous macadam using crushed stone aggregates of specified grading premixed with bituminous binder, transported to site by tippers, laid over a previously prepared surface with paver finisher equipped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers as per specifications to achieve the desired compaction and density, complete as per specifications and directions of Engineer-in-Charge. 50 to 100 mm average compacted thickness with bitumen of grade VG-10 @ 3.5% (percentage by weight of total mix) prepared in drum Hot Mix Plant of 100-120 TPH capacity.

Providing and laying semi- dense Bituminous concrete using crushed stone aggregates of specified grading, premixed with bituminous binder and filler, transporting the hot mix to work site by tippers, laying with paver finisher equipped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction and density as per specification, complete and as per directions of Engineer-in-Charge. 25 mm compacted thickness with bitumen of grade VG 10 @5% (percentage by weight of total mix) and lime filler @ 2% (percentage by weight of Aggregate) prepared in hot Hot Mix Plant of 100-120 TPH capacity.

Providing and laying seal coat of premixed fine aggregate (passing 2.36 mm and retained on 180 micron sieve) with bitumen using 128 kg of bitumen of grade VG-10 bitumen per cum of fine aggregate and 0.60 cum of fine aggregate per 100 sqm of road surface including rolling and finishing with road all complete.

Carriage of various materials from the source to Site of work by M.T.including loading, unloading incld: stacking complete

Qarry stone agg.(53-22.4)mm size from Donipowa avg. lead 15 KM

Screenings/Dust from Mirbazar avg. lead of 10 KM

Plumbing

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid including providing & fixing white vitreous china cistern with dual flush fitting,of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres),including seat cover, and cistern fittings, nuts, bolts and gasket etc complete. :

Providing & fixing White vitreous china water closet squatting pan(Indian type) along with “S” or “P” trap including dismantling of old WC seat and “S” or “P” trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge. Long pattern W.C Pan of size 580x440 mm

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing toilet paper holder 18.34.1 C.P. brass

Providing and fixing PTMT soap dish holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106gms.

Providing and fixing health faucet with hose pipe for european water closet complete in all respect of approved quality (hindware)

Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with a minimum distance of 37 mm from wall face withconcealed fittings arrangements of approved quality and colour, weighing not less than 88 gms.

Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS : 8931

Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 25 mm nominal bore

Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge.

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge.

19.2.1.1 PN-16 pipe, 16mm OD(SDR-7.4)

19.2.1.2 PN-16 pipe , 20mm OD(SDR-7.4)

19.2.1.3 PN-16 pipe , 25mm OD(SDR-7.4)

19.2.1.4 PN-16 pipe , 32mm OD(SDR-7.4

19.2.1.5 PN-16 pipe , 40mm OD(SDR-7.4)

Providing and fixing PPR Unions

19.2A.1 PPR Union 20mm

19.2A.2 PPR Union 25mm

19.2A.3 PPR Union 32mm

19.2A.4 PPR Union 40mm

19.2A.5 PPR Union 50mm

Providing and fixing of centrifugal monoset self primimng pump 1.5kw/2HP (Crompton)

Supply, Placing and fixing in position 50litre water Gyser veniusor eqvialent make

Providing and fixing of floor traps 110 mmwith double chrome plated cover one grated and one closed and all other fittings required

Providing and fixing testing and commisioning PVC SWR pipes jointed with approved solvent cement fixed to walls and ceilings including angle supports with clamps complete including cutting holes in rcc brick work and making good the floors beams, and walls cement mortar where required complete of outer diameter. Type-B

100mm P.V.C. pipe

75 P.V.C. pipe

Collar diff dia

Bend diff dia

P.V.C Tee Diff dia

P.V.C Reducer Diff dia

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) 19.11.1 25 mm nominal bore

Providing and fixing ball valve (brass) of approved quality, High or lowpressure, with plastic floats complete

25 mm nominal bore

32 mm nominal bore

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone- III) : 8 graded stone aggregate 40 mm nominal size),inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank

FootPath

Surface dressing of the ground incld. Removing of vegetation and in-equzlities not exceeding 15 cm deep and disposal of rubbish, lead 50 m and lift 1.5 m (all kinds of Soils)

Providing and laying of stone soling (hand packed) including compacting in foundation trenches incld carriage

P/L in position cement cont: of specified grade excld: the cost of Centering and shuttering. All work upto plinth level. 1:3:6 (1: Cement: 3 coarse sand: 6 graded stone aggregate 20 mm nominal size (crushed))

PL in position cement cont: of specified grade excld: the cost of Centering and shuttering. All work upto plinth level. 1:2:4 (1: Cement: 2 coarse sand: 4 graded stone aggregate 40 mm nom: size (crushed)

Centering and shuttering including strutting, propping etc complete including removal of formwork in foundations, drains etc for mass concrete

Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colou r& pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as per direction of Engineer-in-Charge. 16.93.1 60mm thick cement concrete paver block of M-35 grade with approved colour, design & pattern.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement in position to the required line, level and curvature jointed with cement mortar 1:3 (1 cement: 3 coarse sand) including making joints with or without grooves (thickness of the joints except at sharp curve shall not to be more than 5mm) including making drainage opening wherever required complete etc. as per direction of Engineer-incharge (length of finished kerb edging shall be measured for payment).(Precast C.C. kerb stone shall be approved by Engineer-in-charge)

Carriage of materials from source to site: Stone aggregates below 40mm nominal size and sand for an average lead of 15 kms

Boundary wall

site clearence by means of labour for removel of debris from site , unhygenic material

Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil :

Providing and laying of stone soling nallah (hand packed) including compacting in foundation trenches.

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) including dewatering but excluding

Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cos5.2.2 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)including dewatering but excluding shuttering

Centering and shuttering including strutting, propping etc. and removal of form for:

Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.

Columns, pillars, piers, abutments, posts and struts.

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:6 ( 1 cement : 6 coarse sand) [above plinth level ]

Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete

Structural steel work welded in built up sections and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. [ncldng

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size) including dewatering but excluding shuttering

15mm Cement plaster on the rough side of single or half brick wall of mix:1 : 6 ( 1 cement : 6 coarse sand)

carraige of material by M T upto the site of work

Sand -Avg 10km

Aggregate -Avg 10km

Bricks for an avg: lead of 5 Kms

Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Welded (Iron Gate)

Horticultural operations

Supplying and stacking, laying of good earth at site including royalty incld: spreading, watering and consolidation etc complete (earth measured in stacks will be reduced by 20% for payment)

Construction of R .wall Crate wall

Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres:

Crate work with N allah stones from approved source incld hand packing of stones, cost of stones incld cost / tightening of crates ( woven G.I crates 100mm x 100mm mesh size )and weight not less than 54 kgs per crate incld all carriages involved, complete job.

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:2:4(1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including carraige of material

Supplying & filling of Nallah muck/RBM incl. spreading, watering , dressing , consolidation incl loading ,unloading cost & carriage of RBM etc complete

Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases for columns

Façade development of the building

15mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 4 ( 1 cement : 4 fine sand)

P/f of 3 x9 inch Bujj tiles on the façade of the building laid in 1: 3 cement sand mix mixed with 50 % of tile adhesive in different patterns as per engineer in charge complete job

Providing and fixing double scaffolding system ( cup lock type ) on the exterior side of building/ structure, upto 25 mtrs height above ground level, including additional rows of scaffolding in stepped manner as per requirement of site, made with 40mm dia M.S. tube, placed 1.5 mtr.c/c, horizontal and vertical tubes joint with cup and lock system with M.s tube, M.S tubes Challis M.S clamps and stairs case system in the scaffolding for working platform etc. and maintaining it in a serviceable condition of execution of work of cleaning and/ or pointing and/or applying chemical and removing it their after the scaffolding system shall be stiffened with bracings, runners connecting with the building etc. where ever required. if feasible, for inspection of work at required location with essential safety features for the work men etc, complete as per directions and approval of Engineer-in-charge

Electricfication

Wiring for lighting points/fan points/exhaust fan points/call bell points with 1.5 sq mm FRLS PVC Insulated flexible stranded copper conductor wires in recessed or surface medium class PVC conduit, with 240V 6A modular switch, modular plate and earthing the point with 1.5 sq. mm FRLS PVC Insulated copper conductor single core cable, etc. as required. (Havells/Polycab/ Anchor/Finolex/KEI/RR or equivalent make ) incl. cost of condult.

I.Group A

il. Group B

lil. Group C

Wiring for light/power plug points (15/16A heating points) with 2x4 sq mm FRLS PVC insulated flexible stranded copper conductor wires In recessed or surface medium class PVC conduit along with 1x4 sq. mm FRLS PVC Insulated copper conductor single core cable for loop earthing, etc. as required. (Maximum two points shall be connected on one circuit).(Havells/ Polycab/ Anchor/Finolex/KEI/RR or equivalent) Incl. cost of conduit.

Supplying and fixing of sultable size GI box with modular plate and modular cover In front on surface or in recess, Including providing and fixing of 6 pin 15/16 A modular socket outlet and 15/16A modular switch, connections, etc. as required. (Havells/ SSK/ Anchor/ ABB/Schneider or equivalent)

Supplying and fixing of suitable size GI box with modular plate and modular cover in front on surface or in recess, including providing and fixing of 2 no. 3 pin 5/6 A modular socket outlet and 2 no. 5/6A modular switch, connections, etc. as required. (Havells/ SSK/ Anchor/ ABB/Schneider or eq.)

Supplying and fixing of modular sockets/ Indicators/switches on existing modular plate and switch box, incl. connections, etc. as required. (Havells/ SSK/ Anchor/ABB/Schneider or equivalent)

1.3 pin 5A-10A socket.

II. indicator.

Point wiring for 5A -10A socket out lets (computer points) with 2x2.5 sq mm (P+N)FRLS PVC insulated 660/1100volt grade flexible stranded copper conductor wires of Havells/ Polycab/ Anchor/ Finolex/KEI/RR make in recessed or surface conduiting system and earthing the point with 1 x 2.5 sq. mm single core copper wire (loop earthing), (Maximum two points shall be connected on one circuit). (Havells/ Polycab/ Anchor/ Finolex/KEI/RR or equivalent) incl. cost of conduit

Supply, installation, testing and commissioning of 12 Watt LED recessed/ 150 no. mounted (round or square) Down lighters having aluminum body, minimum 100im/w, average life 50000 hours, LM79 & LM80 test report should be from Govt. Approved NABL lab / Govt. Of India, Operating temperature -10°C to +45°C. The job Includes replacement warranty of fixture if damaged/ burnt out what so ever reason for a period of two years reckoned from the date of successful commissioning/ handing over of site to the intending department. (Havells/Philips/ Crompton/ Jaguar/Wipro). Commercial series.

Supply, installation, testing and commissioning of 18 Watt LED recessed/ mounted (round or square) Down lighters having aluminum body, minimum 100im/w, average life 50000 hours, LM79 & LM80 test report should be from Govt. Approved NABL lab / Govt. Of India, Operating temperature -10°C to +45°C. The job Includes replacement warranty of fixture If damaged/ burnt out what so ever reason for a period of two years reckoned from the date of successful commissioning/ handing over of site to the intending department. (Havells/Philips/ Crompton/ Jaguar/Wipro). Commercial series.

Supply, Installation, testing and commissioning of 10 Watt (2 feet long) LED wall mounted batten (tube lights) having aluminum housing, minimum 100lm/w, average life 50000 hours (Commercial series) The job includes replacement warranty of fixture If damaged/ burnt out what so ever reason for a period of one year reckoned from the date of successful commissioning/ handing over of site to the Intending department. (Havells/Phillips/Crompton/ Jaguar/Wipro).

Supply, Installation, testing and commissioning of 1 star 1200 mm sweep celling fans of Havells / Crompton Greaves/Baja)/ Usha (Sample to be got approved), Incl. cost of extension of GI rod (if required) and making of necessary connections.

Supply and fixing of two module stepped electronic fan regulator on the 25 no. existing modular plate switch box, incl. connections but excluding modular plate etc. as reqd.

Supply, Installation, testing and commissioning of 200-250 mm sweep shutter type exhaust fans, Incl. cost of making of space in walls/ windows as per site and necessary connections. (Havells/ Philips/ Crompton/Anchor).

Supply, Installation, testing and commissioning of 400mm sweep wall fans, 05 no. Incl. cost of celling rose and making of and necessary connections. (Havells/ Philips/ Crompton/Anchor).

Supply, Installation, testing and commissioning of 100Watt LED Flood lighting 10 no. luminaries having aluminum body, minimum 100lm/w, the luminary housing should be aluminum and the luminary optics shall have a high efficiency with transmittance, average life 50000 hours, Operating temperature -10°C to +45°C. The job Includes replacement warranty of fixture If damaged/ burnt out what so ever reason for a period of two years reckoned from the date of successful commissioning/ handing over of site to the Intending department.

Supplying and fixing of modular blanking plates on existing modular plate and switch box,excluding modular plate as required.

Wiring for Circuits/ sub malns along with earth wire in FRLS PVC Insulated 660/1100 volt grade flexible stranded copper conductor wires in recessed or surface conduiting system, excl. cost of conduits(Havells/ Polycab/ Finolex/ Anchor/KEI/RR or equivalent).

2 x 2.5 sq.mm + 1x 2.5 sq. mm

2 x 4 sq.mm + 1x 4 sq. mm

2 x 6 sq.mm + 1x 6 sq. mm

4 x 10 sq.mm + 2x 6 sq. mm

4 x 16 sq.mm + 2x 6 sq. mm

Supply and installation of 32A Industrial/modular plug/socket with 32A DP MCB for ACS

Supplying and fixing following size of perforated painted with powder coating MS cable trays with perforation not more than17.5% In convenient sections, joined with connectors, suspended from the celling with MS suspenders including bolts and nuts, painting suspenders etc. as required. I. 200mm x 50mm x 1.6mm

Supply, installation, testing and commissioning of 30 KVA, 3-Phase, 415V,LT, 01 no. Unbalanced AVR of Essentials, ALBA, Chinar make, operating from input voltage of L-L-155-460V & L-N-90-265V, thereby producing the output voltage of 415V + 2% Phase to Phase and 230V+_2% Phase to Neutral. The AVR should have inbuilt Over voltage protection, Under voltage protection & Over loading with TDR. The stabilizer shall be servo controlled automatic, ONAN cooled and provided with first filling of fresh filtered transformer oil having required di-electric strength. The stabilizer shall be capable of smooth operation up to 10% un-balanced In the load currents complete with servo bye pass system consisting of 100A four pole manual type change over switch. The job also includes all applicable taxes, carriages, loading and unloading.

Supply and fixing of Double door surface/ recess mounting, Vertical/ Horizontal type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, Inclusive of tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBS, excluding cost of MCBs and Incomer.. Way (4 +18).

Supply, Installation, testing and commissioning of 5-32A single pole rating 240/415V, 10 KA "C" curve MCB of Legrand/ Havells/ L&T sultable for Inductive load In the MCB distribution board complete with necessary connections.

Supply, Installation, testing and commissioning of 40 A DP rating 240V, 10 KA "C" curve MCB of Legrand/ Havells/ L&T sultable for Inductive load in the MCB distribution board complete with necessary connections.

Supply, Installation, testing and commissioning of 40A TP&N rating 240/415V, 10 KA "C" curve MCB of Legrand/ Havells/ L&T suitable for inductive load in the MCB distribution board complete with necessary connections.

Supply, Installation, testing and commissioning of 63A TP&N rating 240/415V, 04 no. 10 KA "C" curve MCB of Legrand/ Havells/ L&T sultable for Inductive load In the MCB distribution board complete with necessary connections.

Providing/laying of shock proof rubber mat of 2mtr x1 mtr and 12 mm thick in size.

Providing of chemical earthing as per IS standards by way of digging 8 feet pit then embedding 2.5 mtr. Long GI earthing electrode, 60 mm dia. Connecting the plate with main control board by 10 SWG Copper wire with 1/2" dia. Full thread brass nut and bolts and washers, refilling the plt with chemical compound.

SITC of wall/free standing floor mounted dust and vermin proof 20 cft. compartmentalized cubical panel for electrical Works, made out of CRCA sheet. Other parameters required as per point(a) Thickness of sheet shall not be less than 1.6 mm up to 600 mm length/width of any compartment and be of 2.0 mm above 600 mm. Load bearing structure shall be of 2.0 mm thick sheet supported by base M.S. channel if required. Side walls and cable alley compartment shaving bolted type doors with/without detachable type (b) Panel shall be duly treated for derusting in 7 tank process with de phosphating and with powder coating of minimum 70 microns on both side of panel in desired shade The panel having PU/Neoprene rubber gasket of not less than 3mm thickness, required hardware, separate detachable gland plate M.S. base channel (min 75mm), hinged door with locking arrangement for equipment/switchgear (c) Interconnection between bus bar and switch gears/cable shall be rigidly supported and made out by flexible copper wires (upto 125 amp) and by solid bus bar (>125). (d) Only outer area on all sides shall be measured & panel to be fabricated only from CPRI approved fabricator, CPRI Test certificates to be submitted) All as per pre approved by Engineer in charge.

Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. (Thermal Magnetic type, Adjustable type)

Normal Incoming

250 Amp, 50 KA, FP MCCB incl. Spreader links

ON Load Change Over Switch FP 200 amp. (Front operated)

Aluminum Bus Bar 400 Amp set of 4 strips

Aluminum Bus Bar 500 Amp set of 4 strips

Outgoing

100 Amp, TPN MCB

63 Amp, TPN MCB

Space for 16 way MCBS

Supply, laying, connecting and commissioning of 185 sq. mm 3.5 core PVC insulated and PVC sheathed /XLPE power cable of 1.1 KV grade Aluminum LT cable, Incl. cost of required al. thimbles duly crimped. (under ground/Over head).

Supply, laying, connecting and commissioning of 150 sq. mm 3.5 core PVC 80 mtr. insulated and PVC sheathed /XLPE power cable of 1.1 KV grade Aluminum LT cable, Incl. cost of required al. thimbles duly crimped. Over head). (under ground/

Supply and fixing of celling rose, Incl. base block and necessary connections. Supply, Installation, testing and commissioning of 3 star rating 1.5 Ton Inverter type split Air Conditioners suitable for operation on AC supply single phase 50Hz 230V with hermetically saaled Inverter compressor with air cooled condenser latest R410A/ R-32 refrigerant fan motor, start and run capacitors, relay and over load protector, one Indoor and one outdoor unit. The Indoor

unit fitted on wall by employing suitable clamps and the outdoor unit will be placed on angle Iron stand fitted with nut/bolts outside the room to avold noise, Including standard length of sultable size copper tubing covered with nitrilic foam, topping up with refrigerant for additional length of piping if required, PVC flexible drain pipe, suitable capacity 3 core sheathed/ PVC Insulated copper cable and a battery operated wireless remote unit. The job Includes repairs to walls wherever the same are cut and the AMC of AC for a period of one year from date of successful commissioning. (Dalkin/ Blue Star/ LG/IFB).

Supply, Installation, testing and commissioning of relay type voltage stabilizer sultable for 1.5 Ton AC operating from Input voltage 90-260Volt thereby producing output voltage of 230volts + 3%. (4 KVA) V-Guard/ LIV- Guard/ Servocon.

Supply and erection of Mild Steel Swaged Tubular Pole confirming to IS: 04 no. 2713-1980 (Part 1-11) with base plate. The pole shall be made from steel tube and pipe (IS: 1141, Fe 410)including excavation of the pit and filling up the same with cement concrete of M15 Grade (1:2:4 mix) from base plate to 50 cm above ground level, earthing terminal, cable entry with 32mm dla B- class GI cable sleeves. The pole shall be painted with 2 coats of red oxide primer and 2 coats of enamel paint of silver. The job also includes the cost of form work and carriage of all required materials. (9 mtr. 410 SP-28)

Providing and fixing of detachable type round or square bracket (sultable for 4 lights) of 40 mm dla. Gl pipe as per requirement.

Supply, laying, connecting and commissioning of 10 sq. mm 2 core PVC 250 mtr. Insulated and PVC sheathed /XLPE power cable of 1.1 KV grade Aluminum LT cable, Incl. cost of required al. thimbles duly crimped.

Providing & Fixing of IKOB IP-66 protected high power LED flood light system with single piece Pressure die cast aluminum housing, toughened glass diffuser with suitable lenses on LED to achieve various beam angles, of high power LED of 3 to 5 watt each. System life of 50000 Burning hours with 70% of Initial Lumens maintained. CRI>70 and CCT 5700k. Manufactures Word Mark/Name Engraved/Embossing/ Screen printing on die cast housing to allow traceability/ authenticity. Fixture shall be IS 10322 Complianced. OEM Must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79/LM80) Certificate/ report with liable warranty of product/accessories from.OEM shall be submitted. (100Watt)

Supplying and drawing FRLS PVC Insulated copper conductor single core cable through pole up to light.B.

2 x 2.5 sq. mm (P+N)

1 x 2.5 sq. mm (Loop/ Common earth)

Providing and fixing/ laying of earthing station by way of placing Gl electrode rod in a pit connected through GI strip. (complete Job)

Supply, installation, testing and commissioning of 63 A DP rating 240V, 10 KA "C" curve MCB of Legrand/ Havells/ L&T suitable for inductive load In the enclosure box complete with necessary connections.

Supply, Installation, testing and commissioning of 5-32A single pole rating 08 no. 240/415V, 10 KA "C" curve MCB of Legrand/ Havells/ L&T sultable for Inductive load in the enclosure box complete with necessary connections.

FIRE FIGHTING SYSTEM

Supplying and fixing single headed Internal Hydrant Valve with instantaneous Gunmetal coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal cap and chain as required.

Supplying and fixing First-Aid Hose Reel with MS construction spray painted in post office red,conforming to IS 884 complete with the following as required. (a) 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS:12585 (b) 20 mm nominal internal dia gun metal globe valve & nozzle. (c) Drum and brackets for fixing the equipmets on wall. (d) Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket. Length : 30m

Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets, hose connector etc. conforming to IS 636 (type-A) as required : MOC : Gunmetal.

Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required: MOC : Gunmetal.

Providing and fixing standard Fireman's axe with heavy insulated rubber handle conforming to IS: 926 complete in all aspects and other required accessories like box, hinges etc.

Providing and Fitting of Fully glazed Double Door Fire Hose Reel Cabinet with following specifications: Mounting- Surface Mounted, recessed or semi recessed. Suitable for Fire Hose Reel + Layflat hose + Branch Pipe + Fire Extinguisher. Material: 14/16/18 SWG MS Sheet / SS Sheet. Finish : Powder Coated / Natural Finish. Minimum Size- 1000x600x250 mm Door - Double vertical

Supplying and fixing of Fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd.for suitable dia MS pipe connection conforming to IS 904 as required. 2 way-100 mm dia MS Pipe.

Supply, installation, testing and commissioning of glycerine-filled Bourdon tube pressure gauge conforming to IS:3624 (latest revision) / EN 837-1. The gauge shall be of 100 mm (4") dial size with weatherproof SS 304 case having minimum IP65 protection as per IEC 60529 and fitted with shatterproof safety glass. Wetted parts including internals and socket shall be made of SS 316 or equivalent corrosion-resistant material. The gauge shall have dual scale calibration of 0–16 kg/cm² and 0–230 PSI, complete with gun metal / brass isolation valves and all accessories required for proper installation and operation.

Providing Fitting, testing & commissioning of gun metal ball valve for flushing connection, inclusive of all necessary fittings as required.

(a) 25 mm Dia

(b) 50 mm Dia

Supplying and fixing Double Flanged air vessel made of 250 mm dia,8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser,drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and painting with synthetic enamel paint of approved shade as required.

Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 1239/Class -II of IS: 3589 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required

i) 100 mm Dia

ii) 80 mm Dia

iii) 65 mm Dia

iv) 50 mm Dia

v) 32 mm Dia

vi) 25 mm Dia

Providing and fitting of Rock wool insulation of thickness 50 mm for external piping and internal (exposed) held by chicken mesh along with aluminium cladding of 24 Gauge. Min density 48 kg/cubic metre.

Supplying, fixing, testing and commissioning of Butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required

i) 100 mm Dia

ii) 65 mm Dia

Providing, installation, testing and commissioning of Swing Type Non-return valve of PN 1.6 ratings of following sizes confirming to IS:5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required.

i) 100 mm Dia

ii) 65 mm Dia

Providing, installation, testing and commissioning of Stainless Steel Y-strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange.

i) 100 mm dia or as required

Providing and laying Cement concrete (1 cement : 1.5 coarse sand : 3 graded stone aggregate of nominal size 40 mm in thrust blocks at bends, tees etc and also as support to vertical pipes (wherever required) centering and shuttering etc complete in all respects.

Providing and fixing Resilient rubber neoprene lined single arch vibration eliminators suitable for raw water upto 45°C temperature working pressure 7 kg/cm2 and test pressure 16.0 kg/cm2 with unit control including nuts, bolts matching flanges (screwed or welded) complete with 1.5mm thick compressed asbestos gasket of same rating. Nominal bore suitable for trerrace pump (450 lpm)

Providing, installing, testing, and commissioning of vane-type (paddle) water flow switch. To include adjustable pneumatic retard (delay) mechanism (0–90 seconds), two sets of SPDT (Single Pole Double Throw) contacts, and weather-proof/tamper-resistant housing. Should be UL Listed and FM Approved. Complete with necessary mounting clamps, gaskets, and wiring connections."

Supplying and fixing Orifice plate (Pressure Reducing Valve) made out of 6 mm thick stainless steel (Grade 304) with orifice of required size to be fitted between flange & landing valve of external and internal hydrants to reduce pressure at the outlet to the level of 3.5 kg/cm complete as required.

Providing, fixing, testing & commissioning of Inspectors test assembly complete with test valve, sight glass sectional drain valve, union with corrosion resistant orifice all complete & strictly as per requirement.

Supply, installation, testing & commissioning of 25 mm dia Automatic air release valve sprinkler ring main as per standard fire practice with 25 mm isolation valve, including all accessories as per requirement.

Earthing with copper earth plate 600mm x 600mm x 3mm thick including accessories and providing masonry encloser in cement mortar, cover plate having locking arrangement on the top and G.I. watering pipe 20mm dia 2.7metre long etc. (but with out charcoal or coke and salt) complete as required. As per IS;3043.The job also includes using salt and charcoal / coke for G.I.plate or copper plate earth electrode as required including excavation and refilling the pit in all type of soil, murrum.

Supplying and laying 25 mm × 5 mm G.I. strip at 0.50 metre below ground as strip earth electrode, including connection/termination with G.I. nut, bolt, spring washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50 mm.)

Supplying, Installing, Testing and Commissioning 0-7 Kg/ cm2 ON/OFF Pressure Switch in delivery line of pump along with control wiring for auto starting and auto stopping of hydrant and Terrace Pump.

Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Riveted/bolted/Welded.

Providing and fixing Liquid level controller for fire pump to cut off in case low level of water in tank including cables, pannel etc. and making necessary connection to panel and commissioning.

Supplying, laying, testing and commissioning of 4C × 25 mm2 aluminium FRLS fire-resistant power cable, 1100 V grade, XLPE insulated, PVC/LSZH sheathed, armoured, conforming to IS 7098 (Part-1) and IS 17536 / IEC 60331 (90-minute fire survival), suitable for fire pump installations, including glands, aluminium lugs with bi-metallic connectors, clamps, markers, termination at fire pump panel and motor end, and testing for IR, continuity and phase sequence, complete as per NBC 2016 / Fire & Emergency Services norms.

Supplying, laying, testing and commissioning of 4C × 10 mm2 aluminium FRLS power cable, 1100 V grade, XLPE insulated, PVC/LSZH sheathed, armoured, conforming to IS 7098 (Part-1) and IS 17536 / IEC 60331 (90-minute fire survival), suitable for fire pump installations, including glands, aluminium lugs with bi-metallic connectors, clamps, markers, termination at fire pump panel and motor end, and testing for IR, continuity and phase sequence, complete as per NBC 2016 / Fire & Emergency Services norms.

Supply & Installation of 100 mm wide X 40 mm depth X 2 mm thickness M.S cable perforated trays painted red with powder coating with perforation not more than 17.5% in convenient sections, joined with connectors, suspended from the ceiling with M.S suspenders including bolts & nuts, painting suspenders etc as required.

Supply, Installation, Testing and Commissioning of 1 HP monobloc centrifugal pump, single-phase, 230 V, 50 Hz, capable of delivering required discharge and head, complete with copper wound motor, TEFC construction, IP-55 protection, suitable starter, base plate, necessary suction and delivery connections, including all fittings, fasteners, vibration pads, electrical cabling from starter to motor, earthing, testing at site and commissioning, complete as required.

Supply and installation of Wall mounted Carbon-dioxide ( CO2) fire extinguishers consisting of welded M.S. cylindrical body, squeeze lever discharge valve fitted with internal discharge tube, 30 cms long high pressure discharge hose, discharge nozzle, suspension bracket, confirming to IS : 934 finished externally with red enamel paint and fixed to wall with brackets with rawl plug / dash fasteners complete with internal charge. Capacity 4.5 kg I.S.I marked.

Supply and installation of Dry ABC extinguishers bearing IS:15683 marking fixing to wall including brackets etc of 6 kg capacity with a warranty period of 6 years. It Shall have simple squeeze grip activation mechanism which allows to control the discharge and optimise use of the extinguishing agent.and also should have combination of mono ammonium phosphate (MAP-90) and ammonium sulphate, ABC Dry Powder should not only cut off oxygen supply to the fire but also interferes with the chemical reaction necessary to sustain a fire and fights Class A, B, C and electrically started fires.

Supply and installation of Fire extinguishers (Foam Type) of capacity 9 Kg. The Aqueous film forming foam (AFFF) Foam Extinguisher shall work on the simple principle of cutting off the supply of oxygen required by sustain a fire. The foam smothers the flames and forms a compact blanket over the fire, preventing it from spreading or re-igniting. It shall be used to successfully combat Class A and B fires.

Providing and fixing of fire bucket stands for Buckets at designated locations. MOC; MS

Providing and fixing of fire buckets of 9 Litre capacity to the stands.. MOC ; Al

Supply and installation of illuminated fire exit signages. This sign may be used to indicate all exits which can be used in the event of an emergency . It shall be accompanied by an arrow as per IS-12349 (1988) standards.

Fire Alarm & Detection System

Providing, fixing, testing & commissioning of microprocessor based (4 zone Conventional) fire alarm panel and indicating panel solid state modular card type pulsar, timer for dual stage alarm facility with indicators, standby battery, complies to IS 2189:1999.2 x 16 character backlit LCD display lamp test features. Complete with integral power supply and battery charger for SMF battery. NO/NC contacts for both fire and fault. Switches to enable on board operation. LCD and LED Indication for open, short circuit, Isolate, fire in each zone. reset, lamp test, silence, isolate, short, open, fire continuous buzzer for fault and intermittent buzzer for fire battery charger box, operating voltage 220 Volt mains A.C. input/24V D.C. output etc. complete in all respect.

Supplying, installation, testing & commissioning of smoke detector with builtin LED and mounting base complete with all connections etc. as required.

Supplying, installation, testing & commissioning of heat detector operating at 54ºC/57ºC with rate of rise cum fixed temperature (dual thermistor) type with mounting base complete with all connection etc. as required..

Supplying, installation, testing & commissioning response indicator on surface/recess MS box having two LEDs metallic cover complete with all connections etc. as required.

Providing & fixing of Manual calls point on surface mounting. Front protection glass cover. Unbreakable glass ABS plastic body.

Providing & fixing of Hooter with working AC Voltage 220V A.C./24V D.C. current consumption, sound output 120 DB, material M.S. sheet.

Providing and Laying of 2 Core 1.5 mm2 PVC insulated copper conductor armoured cable XLPE Insulation, Extruded LSZH Inner Sheath, Extruded LSZH (Low smoke zero Halogen) Compound Outer Sheathed Fire Survival Armoured Cable. The job also includes providing and fitting of saddles and hinges as required.

Providing, Laying and Fixing of PVC Conduit along with Accessories in surface/Recess including painting in case of surface conduit,cutting the wall and making good the same in case of recessed conduit as required. 25mm PVC Conduit.

Providing, Fitting of 1000 ltr HDPE Tank Triple Layer, Round Shape, with 5 year warranty and necessary connections and accessories.

FIRE PUMPS & ACCESSORIES

Supplying, installation, testing and commissioning of electric driven terrace pump 450 lpm at 35 m Head conforming to IS 12469: 2019 suitable for automatic operation and consisting of following, complete in all respects, as required: (Terrace Pump) (b) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal as required. (c)Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase, 50 Hz, AC supply with IP55 class of protection for enclosure, horiziontal foot mounted type with Class 'F' insulation, conforming to IS-12615: 2018. (d) M.S.fabricated common base plate, coupling, coupling guard, foundation bolts etc.as required. (e) Suitable cement concrete foundation duly plastered and with anti vibration pads.