Restoration of BT Surface at Jayasimmapuram - (162049R09904), Jayasimmapuram Cross 5 - (162049R09909), Jayasimmapuram Cross 6 - (162049R09910 ), Jayasimmapuram Cross 2 - (162049R09905), Kandhasami Lay Out-2 - (162049R09887), Kandhasami

Amount

Earth work excavation in all soils and sub soils and the full depth as may be directed by the dept officers with initial leads and lifts and cleaning and leveling the site etc., complete complying with standard specification

Removal of excavation excess earth away from the site to 3 km including loading and transporation charges etc.,complete as per standard specification

Advance Patch Work 13.20 mm Providing Advance Patch work using 50 mm consolidated Thickness by using 1 M3 of 13.20mm IRC Metal with 44 KG of Bitumens per 1 M3 of Metal for pre mixing for existing surface advance patch work including cost and conveyance of materials to the work iste and stacking them to teh dept metric guage for the pre measurement, heating the bitumen in bitumen boiler, heating the aggregates and mixing , them with bitumen in mini hot mix plant for premix carpet only rolling by 60-70 KN Power roller for premix carpet and seal coat seperately including labour charges for spreading the mix for premix carpet application of bitumen for seal coat over premix carpet, including labour charges for spreading seal coat separately over premix carpet etc., including higher charges and fuel charges for bitumen boiler and all other tools and plant empolyed etc., complete as per of MOR111Rev-V Specification

Providing and laying, spreading and compacting graded stone aggregate to Wet mix macadam (WMM) specification including premixing the material with water at OMC in mechanical mix plant carriage to mixed material by tipper to site laying in uniform layers with paver in sub base / base course on well prepared surface and compacting with vibratory roller to achive the desired density complete as per clasue 406 of MORTH specifications.

Providing and laying Prime coat of 7 kgs/10 sqm over the WMM surface treated with primer using 7 kgs of bituminous Emulsion (SS) for 10square meter area including cost of bituminous binder, including labour charges for applying the required quantity of bituminous binder as Prime coat manually etc., complete as per 502 of MORTH Rev-5 Specifications

Providing and laying tack coat of 2.5 kgs/10 sqm over the WMM surface treated with binder using 2.5 kgs of bituminous Emulsion (RS) for 10square meter area including cost of bituminous binder, including labour charges for applying the required quantity of bituminous binder as tack coat manually etc., complete as per 503 of MORTH Rev-5 Specifications

Providing and laying 50 mm compacted thick dense bituminous macadam using 0.24 cum of 26.5-13.2 mm graded metal and 0.25 cum of 13.2-2.36 mm graded metal and 0.23 cum of 2.36 mm & below metal with 53.20 kgs of 60/70 bitumen for premixing per 10 sqm including cost and conveyance of all materials to C M P site, heating the bitumen and agregates to required temperature and mixing them in required temperature in central hot mix plant 20- 30 tonnes capacity conveying the mix by tipper trucks to paver site,spreading the mix in required temperature for uniform thickness of 50mm with mechanical paver to the specified grades and cross sections and compaction by Vibratory roller to the required density etc.,including labour charges for loading bitumen in to bitumen tank and metal to feeder unit,labour for attending to paver site etc., including hire charges and fuel charges for 20- 30t C M P with bitumen boiler,tipper trucks, paver finisher, vibratory rollers and all other tools and plants required , including all other incidental charges etc., complete using CMP clause 505 of MORTH Rev-5 Specifications

Providing and laying tack coat of 2 kgs/10 sqm over the WMM surface treated with binder using 2 kgs of bituminous Emulsion (RS) for 10square meter area including cost of bituminous binder, including labour charges for applying the required quantity of bituminous binder as tack coat manually etc., complete as per 503 of MORTH Rev-5 Specifications

Providing and laying Bituminous concrete to 30 mm thick using 0.13 cum of 19.00-9.50mm , 0.17 cum of 9.50-2.36mm and 0.26 cum of 2.36 and below with 46.28 kgs (10% plastic waste )) of VG60/70 bitumen, 4.00 kg plastic for premixing per 10sqm including cost and conveyance of all materials to CMP site heating the bitumen and aggregate to required temperature and mixing them in required temperature in central hot mix plant 20-30 ton capacity , conveying the mix by tipper trucks to paver site , spreading the mix to uniform thickness of 30 mm with mechanical paver to the specified grades and cross sections and consolidated by 80-10 tonne vibratory/ pneumatic roller to the required density etc., including labvour for attending to paver site etc., including hire charges and fuel charges for 20-30 t CMP with bitumen boiler , tipper trucks , paver finisher /9m paver finisher , vibratory / pneumatic roller and all other tools and plant required , including fuel and all other incidental charges etc., complete as per specification using CMP as per clause 507 of MORTH Rev-5

Road marking with hot applied Thermoplastic Compound with reflectorising glass beads on bituminous surface. Providing and laying of hot applieed thermoplastic compound 2.5 mm exclusive of surface applied glass beads as per IRC :35 .The Finished surface to be level, uniform and free streaks and holes

M/S CHITRA INFRAS (BID ID -1323059)