Assembling/erection of Camp Directors Hut and kitchen shed, BSNL shed before Yatra including strengthening of the same after conclusion at Sangam Down.

Amount

Erection of steel frame structure of hut with attached washroom including making the slopes of the truss steep by way of engagement of welding set, blacksmith and cost of all nuts and bolts complete job

Carriage of trusses ,purlins and other material of steel by head load from Holy Cave to Sangam

Fixing of hyrib (0.5 mm) PPGI sheet/CGI sheet side walls with self driven screws excluding cost of purlins etc (labour rate only).Hut roofing, Gable, Roofing, Kitchen Shed and BSNL Shed

Providing and fixing pre coated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved srfaces, excluding the cost of p/-urlins, rafters and trusses and including cutting to size and shape wherever required.

Fixing of 6 mm thick teak ply as approved by Engineer in charge .

Providing and fixing of 6mm thick one side laminated teak plywood of approved brand and manufacture.

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured) 12 mm thick Marine plywood conforming to IS: 710

Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position Budloo / Fir wood

Engagement of Carpenter and labour for fixing of the wood available at site

a) Carpenter Ist Class

b) Carpenter 2nd Class

c) Helper

Providing and fixing of wooden beading and cornice of superior quality on joints (40x6 mm) including carriage upto Sangam Camp.

Supply of the following sanitary and plumbing items:-

Coloured Pedestal type W.C. pan (European type) 580x440mm

Flexible (coil shaped) PVC waste pipe for sink and washbasin 32mm dia with length not less than 700 mm i/c PVC waste fittings

Mirror with plastic moulded frame rectangular shape 453x357mm

8mm dia CP Jet

PVC connection with PTMT nuts 15mm nominal bore and 45cm length.

White plastic Solid P.V.C. plastic seat in European W.C. Pan

Flushing Cistern P.V.C. 10 litre capacity ( low level ) (White) ( with fittings, accessories and flush pipe)

630 x 450 mm Flat back wash basin - Vitreous China

Vitreous china pedestal for washbasin

Stainless steel grating (100mm dia)

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge Internal work-exposed on wall, including fixing the pipe with clamps at 1.00 meter spacing 15mm nominal outer dia pipes

Providing and fixing of15mm dia PTMT bib cock

Providing and fixing of15mm dia PTMT angle valve

Engaging of fitter for repairs/installation of plumbing and sanitary fittings.

Fitter 1st Class

Fitter 2nd Class

Engaging of electrician for repairs/installation of electrification before Yatra and dismantling of the same after Yatra

Electrician1st Class

Electrician 2nd Class

Supply of wiring and switch boards and lamps of approved brand and make.

1.50mm² wire (each coil 90m)

6 Amp switch

6 Amp 5 Pin socket

Angle Holders

12 Watt LED Lamp

2 Way Gang Box

4 way Gang Box

Strengthening of Prefab Hut by way of jacking and safety Panelling

Dumping of stones including cost of stones in horizontal on level by ramming the layers properly.

Providing and laying in position cement concrete of specified grade including curing excluding cost of centring and shuttering all works up to plinth level.1:4:8(1 cement :4 coarse sand : 8 graded stone aggregate 40 mm nominal size) nallah stone

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4graded stone aggregate 20 mm nominal size)

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 500x500 mm

Carriage of Cement and other material by MT from Ganderbal to Dumail

Carriage of cement and steel by head load for 12 Km lead from Dumail to Sangam

Carriage of cement and steel by head load for 12 Km lead from Dumail to Sangam

Carriage of sand and bajri by head load for an avg lead of 500 metres.

Carriage of stones by head load for an avg lead of 1 km.

Dismantling roofing including ridges, hips, valleys and gutters etc and stacking material within 50 meter lead of G.S. sheet.

MR. JAHANGIR AHMAD BHAT