Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹50.0 LAccepted-AOC | L-1 | Accepted-AOC Being L-1 | |
| 2 | L-2₹59.5 L+₹35,055 (0.59%)Rejected-AOC 303 GHS 888 SECTOR 20 PANCHKULA 134116 HARYANA | PANCHKULA | PANCHKULA | HARYANA | 134116 | L-2 | Rejected-AOC Other than L-1 | |
| 3 | L-3₹60.7 L+₹1.5 L (2.62%)Rejected-AOC | L-3 | Rejected-AOC Other than L-1 | |
| 4 | L-4₹61.7 L+₹2.5 L (4.29%)Rejected-AOC C 33 3971 GALI NO 6 JALANDHAR CANTT 144005 | JALANDHAR | JALANDHAR | PUNJAB | 144005 | L-4 | Rejected-AOC Other than L-1 | |
| 5 | L-5₹62.6 L+₹3.4 L (5.78%)Rejected-AOC | L-5 | Rejected-AOC Other than L-1 |
| Sl No | Description | Qty | Unit | KULBHUSHAN AGGARWAL L1 | DEMROT ELECTRICAL WORKS L3 | Baliyan Electrical Works L7 | M/s Anil Kumar L8 | M/s BHUPINDRA ENGINEERING WORKS L6 | R D Bansal L2 | M/S Mukesh Kumar Gupta L4 | Bharat Enterprises L5 |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | M&L for Excavation in trenches not exceeding 1.5 metre wide and not exceeding 1.5 metre in depth and not exceeding 10 sqm on plan for laying pipe lines and cables etc., and getting out as in any type of soil complete all as specified and as directed by Engineer-in-Charge. | 615.5 | CUBIC METRE | 80 ₹49,240 Lowest | 300 ₹1,84,650 | 120 ₹73,860 | 150 ₹92,325 | 120 ₹73,860 | 100 ₹61,550 | 155 ₹95,402.5 | 110 ₹67,705 |
| 2.00 | M&L for Returning, filling in including spreading leveling, watering and well ramming in layer not exceeding 25 cm thick in any type soil, complete all as specified and as directed by Engineer-in-Charge. | 554 | CUBIC METRE | 40 ₹22,160 | 100 ₹55,400 | 25 ₹13,850 | 20 ₹11,080 Lowest | 25 ₹13,850 | 20 ₹11,080 Lowest | 20 ₹11,080 Lowest | 20 ₹11,080 Lowest |
| 3.00 | M&L for Removing excavated material to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and as directed by Engineer-in-Charge. | 61.5 | CUBIC METRE | 40 ₹2,460 | 100 ₹6,150 | 15 ₹922.5 Lowest | 20 ₹1,230 | 100 ₹6,150 | 30 ₹1,845 | 25 ₹1,537.5 | 20 ₹1,230 |
| 4.00 | M&L for taking up MS pipe with flanged ends laid in trenches including disconnecting pipes and fittings of size 150 mm bore complete all as specified and as directed by Engineer-in-Charge. | 2,000 | RUNNING METRE | 40 ₹80,000 | 100 ₹2,00,000 | 40 ₹80,000 | 100 ₹2,00,000 | 60 ₹1,20,000 | 25 ₹50,000 Lowest | 45 ₹90,000 | 60 ₹1,20,000 |
| 5.00 | Supply, laying, jointing and testing of ductile iron pressure pipe with socket & spigot ends, ISI marked, conforming to IS : 8329/2000 in standard length of 5.50 - 6.00 meter of size 150 mm Bore, classification K-9, suitable for and including push on rubber tyton joints (gasket D-jointing) with cement mortar lining in the pipes, including aligning the pipes inside trenches as per IS:12288/1987 and testing the joints with required water pressure complete all as specified & as directed by Engineer-in-Charge.
Note. (i) Cutting of pipe, excavation, earth works and CI/ DI specials shall be measured and paid for separately.
(ii) Pre dispatch inspection of DI pipe shall be carried out by rep of Accepting Officer at manufacturer premises with overall cost quoted by Contractor. Nothing extra shal be payable on this account.
(iii) After Laying of DI pipe line, same shall be tested for hydrostatic pressure test and equipment/ instruments required for testing shall be arranged by Contractor.
(iv) Manufacturer test certificate will be required while claiming the payment. | 2,400 | RUNNING METRE | 2,100 ₹50,40,000 | 1,960 ₹47,04,000 Lowest | 2,600 ₹62,40,000 | 2,300 ₹55,20,000 | 2,400 ₹57,60,000 | 2,128 ₹51,07,200 | 2,040 ₹48,96,000 | 2,170 ₹52,08,000 |
| 6.00 | S&F DI pipe fittings up to 150 mm bore such as bends, tapers, tee, pieces single/ branch, "Y" junction, collars, caps and plugs etc., spigot socketed or flanged ends type, conforming to IS : 9520/2000 with pressure rating PN 1.0 (all the fittings shall be coated for rust prevention i.e. external coating zinc rich paint with finishing layer of bituminous as per Annexure - A of IS : 9523/2000 and internal lining shall be of cement mortar with seal coat as per Annexure 'B' of IS : 9523/2000) complete all as specified and as directed by Engineer-in-Charge.
Note:
(i) Joint and jointing material shall be measured and paid separately.
(ii) Excavation and earth work shall be measured and paid for separately. | 350 | KILOGRAM | 250 ₹87,500 | 300 ₹1,05,000 | 140 ₹49,000 | 120 ₹42,000 Lowest | 351 ₹1,22,850 | 120 ₹42,000 Lowest | 225 ₹78,750 | 150 ₹52,500 |
| 7.00 | Supply and fixing ductile iron Sluice Valve, 150 mm Bore, with flanged ends, class PN 1.6 complete with ISI marked (IS-14846) with gun metal spindle and hand wheel including taking down old unsv sluice valve complete all as specified and directed by Engineer-in-Charge. | 2 | EACH | 14,555 ₹29,110 | 25,000 ₹50,000 | 7,000 ₹14,000 Lowest | 15,000 ₹30,000 | 28,500 ₹57,000 | 12,550 ₹25,100 | 26,000 ₹52,000 | 24,000 ₹48,000 |
| 8.00 | S&F in repair DI air release valve, double orifice, isolating type with SS Ball as per IS :14845, PN-1.0, flanged ends of size 150 mm bore, including taking down old unsv air release valve complete all as specified and as directed by Engineer-in-Charge. | 1 | EACH | 8,500 ₹8,500 | 15,235 ₹15,235 | 2,600 ₹2,600 Lowest | 15,000 ₹15,000 | 15,000 ₹15,000 | 16,600 ₹16,600 | 18,000 ₹18,000 | 12,000 ₹12,000 |
| 9.00 | M&L for brick with sub class B brick (old size bricks), straight or curved on plan exceeding 6.0 metre mean radius built in cement mortar 1:4, including demolition of old brickwork complete all as specified and as directed by Engineer-in-Charge. | 2 | CUBIC METRE | 4,000 ₹8,000 Lowest | 12,000 ₹24,000 | 10,000 ₹20,000 | 5,000 ₹10,000 | 4,500 ₹9,000 | 4,900 ₹9,800 | 4,800 ₹9,600 | 4,500 ₹9,000 |
| 10.00 | M&L for Providing cement concrete 1:2:4, type B-1 (using 20 mm graded stone aggregates) as in roof kerbs or mud stops, copings, bed plates, kerbs including weathering, slightly rounded or chamfered angles and throating on edges complete all as specified and as directed by Engineer-in-Charge. | 2 | CUBIC METRE | 3,500 ₹7,000 | 10,000 ₹20,000 | 3,000 ₹6,000 Lowest | 5,000 ₹10,000 | 5,000 ₹10,000 | 3,000 ₹6,000 Lowest | 4,200 ₹8,400 | 6,000 ₹12,000 |
Tender Value
₹70.2 L
EMD Value
₹1.3 L
Closing Date
25 Mar 2026, 6:00 pmClosed
CWE Chandimandir
HQ CWE Chandimandir, PIN-134107
CWE/CHM(U)-131/2025-26 SPECIAL REPAIR/ REPLACEMENT OF OLD RUSTED MS PIPE TO DI PIPE LINE FROM INTERMEDIATE PUMP HOUSE TO VATIKA PUMP HOUSE UNDER GE (U) CHANDIMANDIR
2026_MES_754228_1
CWE/CHM(U)-131/2025-26
Open Tender
Civil Works - Water Works
Item Rate
180 days
GE (U) Chandimandir
Class C, a(ii)
9 documents required · 9 mandatory
₹1,000
GE (U) Chandimandir
₹1.3 L
10 Aug 2026
25 Feb 2026
28 Mar 2026
25 Feb 2026
25 Mar 2026
18 Mar 2026
25 Feb 2026 - 4 Mar 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | M&L for Excavation in trenches not exceeding 1.5 metre wide and not exceeding 1.5 metre in depth and not exceeding 10 sqm on plan for laying pipe lines and cables etc., and getting out as in any type of soil complete all as specified and as directed by Engineer-in-Charge. | 615.5 | CUBIC METRE | 1.25 | ₹769.38 |
| 2 | M&L for Returning, filling in including spreading leveling, watering and well ramming in layer not exceeding 25 cm in any type soil, complete all as specified and as directed by Engineer-in-Charge. | 554 | CUBIC METRE | - | - |
| 3 | M&L for Removing excavated material to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and as directed by Engineer-in-Charge. | 61.5 | CUBIC METRE | 100 | ₹6,150 |
| 4 | M&L for taking up MS pipe with flanged ends laid in trenches including disconnecting pipes and fittings of size 150 mm bore complete all as specified and as directed by Engineer-in-Charge. | 2,000 | RUNNING METRE | 53 | ₹1,06,000 |
| 5 | Supply, laying, jointing and testing of ductile iron pressure pipe with socket & spigot ends, ISI marked, conforming to IS : 8329/2000 in standard length of 5.50 - 6.00 meter of size 150 mm Bore, classification K-9, suitable for and including push on rubber tyton joints (gasket D-jointing) with cement mortar lining in the pipes, including aligning the pipes inside trenches as per IS:12288/1987 and testing the joints with required water pressure complete all as specified & as directed by Engineer-in-Charge.
Note. (i) Cutting of pipe, excavation, earth works and CI/ DI specials shall be measured and paid for separately. | 2,400 | RUNNING METRE | 10 | ₹24,000 |
| 6 | S&F DI pipe fittings up to 150 mm bore such as bends, tapers, tee, pieces single/ branch, "Y" junction, collars, caps and plugs etc., spigot socketed or flanged ends type, conforming to IS : 9520/2000 with pressure rating PN 1.0 (all the fittings shall be coated for rust prevention i.e. external coating zinc rich paint with finishing layer of bituminous as per Annexure - A of IS : 9523/2000 and internal lining shall be of cement mortar with seal coat as per Annexure 'B' of IS : 9523/2000) complete all as specified and as directed by Engineer-in-Charge.
Note:
(i) Joint and jointing material shall be measured and paid separately.
(ii) Excavation and earth work shall be measured and paid for separately. | 350 | KILOGRAM | 11 | ₹3,850 |
| 7 | Supply and fixing ductile iron Sluice Valve, 150 mm Bore, with flanged ends, class PN 1.6 complete with ISI marked (IS-14846) with gun metal spindle and hand wheel including taking down old unsv sluice valve complete all as specified and directed by Engineer-in-Charge. | 2 | EACH | - | - |
| 8 | S&F in repair DI air release valve, double orifice, isolating type with SS Ball as per IS :14845, PN-1.0, flanged ends of size 150 mm bore, including taking down old unsv air release valve complete all as specified and as directed by Engineer-in-Charge. | 1 | EACH | 100 | ₹100 |
| 9 | M&L for brick with sub class B brick (old size bricks), straight or curved on plan exceeding 6.0 metre mean radius built in cement mortar 1:4, including demolition of old brickwork complete all as specified and as directed by Engineer-in-Charge. | 2 | CUBIC METRE | 53 | ₹106 |
| 10 | M&L for Providing cement concrete 1:2:4, type B-1 (using 20 mm graded stone aggregates) as in roof kerbs or mud stops, copings, bed plates, kerbs including weathering, slightly rounded or chamfered angles and throating on edges complete all as specified and as directed by Engineer-in-Charge. | 2 | CUBIC METRE | 10 | ₹20 |
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.11 MB
Tenderdocuments131.pdf
Tender Documents • 0.52 MB
Additional131.pdf
Additional Documents • 0.50 MB
BOQ_844787.xls
BOQ • 0.39 MB
Amdt8.pdf
PDF • 0.10 MB
Amdt7.pdf
PDF • 0.06 MB
Amdt6.pdf
PDF • 0.06 MB
Amdt5.pdf
PDF • 0.06 MB
Amdt4.pdf
PDF • 0.06 MB
Amdt3.pdf
PDF • 0.06 MB
Amdt1.pdf
PDF • 0.06 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .