Road Safety and Thermoplastic work On Widening and Strengthening of MF Road Km 110 to BM Road Via Budvai Mallhapur Karoliya Kisarua Road in Distt. Budaun

Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectiorising glass beads @ 250 gms per sqm area , thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC : 35.The finished surace to be level, uniform and free from streaks and holes including cost of all type of material labour, T & P etc. required for proper completion of the work as per MORT & H specifications (2001) No. 803 complete.

Supply and fixing of welded builup overhead gantry structure up to 14 M/spem of compring of two vertical posts 6.00 m clear height from the top of RCC forundation made of 300 mm dia pipe as verticals welded with 10 mm MS plate at Top & Bottom for bearing and horizontal frame 40 mm dia MS pipe and 25 mm (M) Bracing including cost of painting of structure and RCC foundation with all material,labour,T&P etc. as per approved drawing and desion including sosting charges and labour charges for fixing of massage boards as per direction of Engineer in charges Includiong all taxes..

Retro-RetectiveSheeting type-xl with 4 mm thick ACM Single Side Providing & fixing of reflective signs with a comosion resistant 4 mm thick with 0.4 to 0.5 mm both side aluminium skin aluminiumn composite panet face lo be tuly covered with High Intensiy prismatic sheating type IV as per IRC-67:2012 retro refleclive sheating with back frame MS angle of 35x35x5 mm. Legends , letters , numerais and borders etc shouid be as per MoRTH specificalion No-801.3.7 The sheeting shall have a pressuro . sensilive adhesive of the aggressive . lack type requiring no heat solvent other preparation for ashesion to a smooth clean surtace, in a manner recommended by the sheeting manufacturer. The ACM (Aluminium omposile Materals) shall be fixed on the Back frame MS Angle with riveting . Micro prsmatic type IV Retro reflective sheeting contirming to AS TM D4956-09 shan |be Pressure fixed. The Retro reflective sheeting shall te tested for a ertificate of having the sheeting ftested fcr coefficient ot ratro refection, daytime colour and luminance, shrinkage, fiexblity. lner |removal, adhesion. impact resistance, specular gloss and fungus resistance, 3 years outdbor weathering and its having passed these tests ghal be abtaine d from Internationay Goverment Laboralory? Institute by the manufacturer of the sheeling and in case the certificate is obtained from Iintemational condition. R should aiso be obtained trom Indian conditicn within 3 years of launching of produci by the manufacture in abroad. Alteratively. a certificate confarming to ASTM Specification (D 4956-09) on artifkcial acceleraled wealhering requrements from a reputed laboratory in Indie can be faccepted provisionally In such a situation, the EmpiayeriClent, it so desires, could seek for- a performance Quarantee which would be released after receipt of certificate meeting the requirement of three years outdoor weathering of the sheeting as per IRC 07-20 12 & Proof of the same Report shal be juploaded which quoting lender. The rate shall inciuce all matenials, labour, T&P. transpartation jinstallation and incidentals all complete as per direction cf the Engineer-in-Charge

Supply & fixing of Retro Reflective Delinators (with wire mesh for proction) made of dia (75 mm) 16 guage pipe having 1200 mm long duly stone enameled in black color, top of each delinator is to be provided with 3 striops of color white/Red yellow each of high intensity grade retro reflecting sheeting in 75mm width. Installation should ensure that at least 30cm of the post remain below groung level and property grouded with M-15 concrete (150x150x300 mm) foundation as per IRC-79 No. of Culverts= 7x5=40

Supply & fixing of moulded shank cats eyes moulded shank rased pabmant marker made of polycornate moulded body and refelcted panels with micro parismatic lanes face comforming to astmd 4280 type as and compaying specification of catagoryes of MORTH surcular no.RW/NH/3302/10-97 du third date 11-06-1997. the hinght width and lenght shall no txceed 20 mm 150mm and with minimum refelective area of 13 sqcm and the each side, slope to rhe base shall be 35 degree. fixing well be with out mails but using twinpolymer shanks using bitumen adhesive on bitumen roas as per maunfacturers recommandation including side clearance etc and complete as direction of engineer in charge, rate are included all txes GST.(sollar,studs or yellow cats eyes to way and res and white two way cat eyes.)

Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 mad of high intensity grade sheeting vide clause 801.3, fixed cover aluminium shting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x75 mm x6 mm firmly fixed to th ground by means of properly dsignd foundation with M-15 grade cment conc. 45 cm x 45 cm x 60 cm, 60 cm below ground lvel as per approved drawing (stop)

Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 mad of high intensity grade sheeting vide clause 801.3, fixed cover aluminium shting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x75 mm x6 mm firmly fixed to th ground by means of properly dsignd foundation with M-15 grade cment conc. 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing 90cm Equilatral

Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 mad of high intensity grade sheeting vide clause 801.3, fixed cover aluminium shting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x75 mm x6 mm firmly fixed to th ground by means of properly dsignd foundation with M-15 grade cement conc. 45 cm x 45 cm x 60 cm, 60 cm below ground lvel as per approved drawing. 30cm x 90cm (hazards left/ Right)