Repair Renovation in Kothi No. 906 Sector-39 Chandigarh

Providing and fixing of cupboard made of 19mm thick commercial board finished with lamination from both sides (including partition and drawers) complete in all respect i/c necessary fittings

Wire gauge Hollock wood door shutter without springs housed in chowkhat. (A) 35mm thick (CSR 17.11 (ii) A)

Curtain rod 25mm dia aluminum pipe with brackets fixed in position including nails and screws etc. (Teak Wood) (CSR 17.25)

Providing and fixing hydraulic door closer ISI mark with necessary screw etc. complete (c ) I.S.I Designation No. III (size of door 851mm to 1000mm) (CSR 17.43 (c)

Wire gauge fixed on chowkats with 25mm thick Hollock wood cover molding of full width (CSR 17.13 (ii)

Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate z sections and other sections conforming to Is: 733 and IS : 1285 of Jindal, Hindalco, Mahavir or equivalent make approved by Engineer in Charge , fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC Plug/neoprene felt etc. aluminum sections shall be smooth, rust free, straight, mitered and jointed mechanically wherever required including cleat angle, aluminum snap beading for glazing/paneling, C.P.brass/stainless steel screws, all complete as per architectural drawings and the directions of Engineer-In-Charge. (Glazing and paneling to be paid for separately) : A: For fixed portion and chawkhats (CSR 17.45 (a)

B: For shutters of doors, windows & ventilators including providing and fixing hinges/pivots and labour for fixing of fittings wherever required including the cost of PVC Plug / neoprene gasket required (CSR 17.45 b)

Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with PVC Plug/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminum snap beading shall be paid in basic item) (i) Float glass panes of 5 mm thickness (CSR 17.47 (i)

Providing & fixing 4" stainless steel tower bolts ISI marked on door & window frames complete in all respect as per the directions of Engineer-in-charge. (CSR 17.75)

Providing & fixing 6" stainless steel handles ISI marked on door & window frames complete in all respect as per the directions of Engineer-in-charge. (CSR 17.69)

Providing & fixing 8" stainless steel tower bolts ISI marked on door & window frames complete in all respect as per the directions of Engineer-in-charge. (CSR 17.77)

Providing & fixing 6" stainless steel tower bolts ISI marked on door & window frames complete in all respect as per the directions of Engineer-in-charge (CSR 17.76)

Hollock wood doors shutter windows shutter including hinges, screws, chocks, cheats, stops cords etc. complete fixed in position (a) panelled, glazed or glazed and panelled. (ii) 35 mm thick (CSR 17.10 (xvii) a (ii)

Providing and laying Laminate wooden flooring (Grade AC4 or AC4+ laminates) 6 mm to 12 mm thick, having a good backing layer made up of plastic laminate or melamine, core made up of medium-density fiberboard (MDF),which is less resistant to impact damage and less resistant to being dented by heavy furniture, having a décor layer to give each floor its appearance and consisting of one or more sheets of paper impregnated with melamine resin and top wear layer having clear aluminum oxide finish that protects the decorative layer & imparts the desired level of sheen, from full gloss to low gloss, duly fixed to the base floor using adhesive as approved by the manufacturer (CSR 14.101)

Providing and applying Anti Termite Treatment using post constructional chemical treatment measures as per IS - 6313 - 2001 ( Part 3 ) & using Chemical containg chloropyrifos systemic insecticide diluted to manufacturers specifications by drilling holes in the floor slab & along skirting 300 mm apart & 12 mm dia, drilling holes along all possible entry points such as junctions of floor and walls, door frames, sewage lines, entry points , etc. & injecting them with the chemical solution (CSR 14.132)

Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction ofEngineer-in-charge (a) Size 600x600 mm (CSR 14.120)

Providing and laying vitrified floor tiles of different sizes in light colour shades made using Double Charge technology (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete (a) Size 600x600 mm (CSR 14.113 a))

Providing and fixing of 4mm thick teak ply on both side of existing wood work complete in all respect

12.5mm thick cement plaster 1:4 (CSR 15.9)

Cement concrete 1:2:4 gola 10cm x 10cm concave quadrant along junction of roofs with parapet wall (CSR 13.55)

Providing and fixing mineral fibre false ceiling tiles at height upto 4 mtr of size 595X595mm of app (i) With 16 mm thick beveled tegular mineral fibre false ceiling tile (NRC 0.55 to 0.6) size 595x595 mm (CSR 13.86 (i)

Supply & Fixing Fiber Glass Coated Mesh with thickness of 45 Gsm for the water proofing of roof (CSR 13.90)

Water proofing treatment of Roof Slab with High performance cementitious two component product (CSR 13.91)

Providing and fixing polycarbonate sheet sheet should have protective guard film of 25 microns minim (d) Pollycarbonate sheet 2mm thick solid type (CSR 13.27 (v) d)

Renewing glass panes with wooden fillets wherever necessary (b) Glass panes weighing 10.75 Kg/sqm (CSR 31.6 (b))

Frosted glass Panes weighing 8.44Kg/sqm (CSR 31.6 c)

Providing and fixing of Hollock wooden jafri fixed with 3" wide strips in wooden frame 3"x1½" size at top & bottom to hold vertical strip wooden battens and fixing vertical batten of size 3' x 1½"@ 4.5" both side of frame with nails and screws supported with angle iron 50mmx50mmx5mm thick including painting/ priming coat etc complete in all respect

Providing and fixing of polycarbonate sheet shed made of 2"x2" section hollow pipe and 2" wide aluminium section for fixing of sheet with rubber gasket and silicon etc. complete in all respect.

Providing and fixing of wooden wall panelling over kail wood frame work, 6mm commercial ply & 4mm teak ply with 2½" x 2½" centre to 16" x16" wooden frame of partal wood complete with melamine finish

Providing and fixing door profile made of laminate wood complete in all respect

Providing Polyester Powder coating 50 micron any coloured specified to alumnum section of various sizes including carriage of material from market to workshop & workshop to site of work (CSR 18.48)

Dismantling brick work tile, masonry or tile lining (b) In cement (CSR 8.5 (b)

Dismantling glazed tiles (to be carefully removed). (CSR 8.35)

Please Enable Macros to View BoQ information