Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹55.3 LAccepted-AOC NO 1 116 GANGAI AMMAN KOVIL STREET SORANJERY PATTABIRAM CHENNAI 600072 | CHENNAI | CHENNAI | TAMIL NADU | 600072 | L1 | Accepted-AOC Being lowest tenderer | |
| 2 | L2₹61.1 L+₹3.1 L (5.37%)Rejected-Finance FLAT NO 302 VPC CASTLE 1 1 650 5 2 GANDHINAGAR HYDERABAD 500080 | HYDERABAD | HYDERABAD | TELANGANA | 500080 | L2 | Rejected-Finance Being other than lowest tenderer | |
| 3 | L3₹62.8 L+₹4.8 L (8.36%)Rejected-Finance 53 13 A OUTER CIRCULAR ROAD KILPAUK GARDEN COLONY CHENNAI 600 010 | CHENNAI | CHENNAI | TAMIL NADU | 600010 | L3 | Rejected-Finance Being other than lowest tenderer | |
| 4 | L4₹69.7 L+₹11.7 L (20.2%)Rejected-Finance NO 3 JAMI JAM KHAN ROAD 1ST LANE ROYAPETTAH CHENNAI 600 014 | CHENNAI | CHENNAI | TAMIL NADU | 600014 | L4 | Rejected-Finance Being other than lowest tenderer |
Tender Value
₹60 L
EMD Value
₹1.1 L
Closing Date
26 Jul 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Shri Vishal Garg, IDSE, SE(SAG)
COMMANDER WORKS ENGINEERS CHENNAI PALLAVAN SALAI CHENNAI 600 002
PROVN OF ALUMINIUM WINDOWS IN KV SCHOOL BLDG AT IGOE UNDER GE CHENNAI
2023_MES_607009_1
88434
Open Tender
Civil Works
Item Rate
90 days
CHENNAI
As per Tender Documents
6 documents required · 6 mandatory
₹1,000
GE CHENNAI
₹1.1 L
Yes
9 Aug 2023
30 Jun 2023
31 Jul 2023
30 Jun 2023
26 Jul 2023
14 Jul 2023
30 Jun 2023 - 6 Jul 2023
Amount
BOQ UPLOADED ON 11Jul 2023
SCH A Part I
Taking down Steel windows of any description with shutters (without taking off shutters from the frames) including grill/guard bars,Area exc 1.5 sq. m but n exc 4 sq m each
Supply , fabricate & fix in position Powder coated aluminium frame for four Track for sliding windows Series 'D' 25mm with following sections all as specified and as directed :- (a) Jindal Aluminium Section No 20796 or its equivalent in Hindalco/Hindal/Century Extrusions/Balco as approved for 1 No of Top frame and 2 Nos of side frames (b) Jindal Aluminium Section No 20797 or its equivalent in Hindalco/Hindal/Century Extrusions/Balco as approved for 1 No of Bottom frame Notes :- (i) The quoted rates shall deem to have been included for provision of PVC protection sheeting and its removal after fixing of frame in position (ii) The cost of joining cleat and other fixtures shall deem to have been included in quote rates (iii) Powder coating shall not be less than 50 micron. Certificate from the manufacturer shall be submitted by the contractor before claiming any payment. (iv) Aluminium sections shall be smooth, rust free, straight confirming to IS-733 and IS-1285 respectively. (v) The Aluminium sliding window shutter shall be measured and paid for separately
Supply, fabricate and fix in position Powder coated aluminium sliding window shutter of Series 'D' 25mm with with following sections all as specified and as directed :- (a) Jindal Aluminium Section No 20841 or its equivalent in Hindalco/Hindal/Century Extrusions/Balco as approved-for one no of Top frame and One Nos of side frame (b) Jindal Aluminium Section No 20506 or its equivalent in Hindalco/Hindal/Century Extrusions/Balco as approved-for one no of bottom frame (c) Jindal Aluminium Section No 20939 or its equivalent in Hindalco/Hindal/Century Extrusions/Balco as approved-for one no of Locking Side frame Notes :- (i) Glass pane / Mesh will be measured and paid for separately. (ii) The cost of all other accessories required for the smooth functioning of the sliding window such as pivots, rollers, locking arrangement with lock, EPDM rubber/neoprene gasket required for fixing Glass / Mesh as per IS1949:1961 shall deem to have been included in quote rates . (iii) Aluminium sections shall be smooth, rust free, straight confirming to IS-733 and IS-1285 respectively. (vi) Powder coating shall not be less than 50 micron. Certificate from the manufacturer shall be submitted by the contractor before claiming any payment.
Cutting holes into or through brick walls, concrete built, in cement mortar or cement lime mortar and stone walls making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required superficial area not exceeding 150 Sq cm all as described and as directed
Material and labour for Plain cement concrete in Type B0 1:2:4 (12.5mm graded aggregate) as in kneelers, apex stones, bed plates, kerbs and the like including weathering, slightly rounded or chamfered angles and throating including necessary form work complete all as specified and as directed
Material and labour for Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted or forged into spikes; framed guard bars; barred iron doors ladders, framed balusters, walkways, railings, framework of water tanks and similar work conforming to Fe 290, Gde-E-165 all as specified and as directed
Material and labour for preparation of new steel surfaces of any description, over 10cm width or girth not other wise described and applying two coats Synthetic enamel paint over one coat of Zinc chrome all as specifiedand as directed
Supply and fix Sheet glass 5.0 mm thick clear float, ordinary quality in square exc 0.5 Sqm in each pane to Aluminum sliding windows shutters all as specified and as directed. Note : The cost of EPDM rubber/neoprene gasket required for fixing Glass / Mesh as per IS1949:1961 shall deem to have been considered under BOQ item No 5
Supply and fix Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture1.40mm and fixed Aluminum sliding windows shutters all as specified and as directed . Note : The cost of EPDM rubber/neoprene gasket required for fixing Glass / Mesh as per IS1949:1961 shall deem to have been considered under BOQ item No 5
Material and labour for taking down cement plaster on brick work or stone walls etc including racking out joints, hacking for key scrubbing down with water etc and removing the debris out side MD land all as specified and as directed.
Material and labour for Rendering in CM 1:6, on fair faces of brick/concrete suraces15mm thick finishing the surfaces even and smooth without using extra cement all as specified and as directed.
Material and labour for Rendering 15mm thick on fair faces of brickwork or concrete surfaces in two coats with 5mm thick in CM 1:4 over 10mm thick in CM 1:6, finishing the surfaces fair and even with out using extra cement all as specified and as directed.
Material and labour for Preparation of new surfaces of walls & applying one coat of white wash all as specified and directed.
Material and labour for Preparation of new plaster surfaces of walls and applying two coats weather proof paint (APEX of approved shade) over a coat of exterior primer all as specified and as directed..
Material and labour for Preparation of new plaster surfaces of walls and applying two coats of distemper oil emulsion over a coat of cement promer all as specified and as directed..
Material and labour for Complete removal of existing treatment on wall surfaces and applying two coats of distemper oil emulsion over a coat of Chalk whiting over plastered surface including necessary preparation to prepare the surface even and smooth complete all as specified and directed.
Material and labour for Complete removal of existing treatment and washing, rubbing down and stopping of surfaces of wall and applying two coat of weather proof paint (APEX of approved shade) or equivalent over a coat of chalk whiting incl preparation of old decorated plastered surface all as directed by Engr -in Charge.
M/S VASU ENGINEERS
M/s.Sai Agency
G.L.THIRUMALAI NAIDU AND COMPANY
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .