Estimate for Construction of Escape Head Regulator off taking at R/s of U/s of 51930 m Canal Syphon of Kandi Canal 1 and Ground Water Division Hoshiarpur

Amount

Dismantling concrete ((c)) Cement concrete plain 1:3:6 mix

Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with excavated surplus soil. In Ordinary soil (B) Mechanical Means

(a) Depth upto 3 m

(b) Depth 3 m to 6 m

Compaction of Earth work- Compaction of earth work & Preparation of sub grade including loosening, leveling of earth 225mm thick top layer, rough dressing of soil, final dressing of earth to give level, camber, watering, rolling with road roller, compacting the bed to achieve minimum dry density as given in the Table 300-2 as per Technical clause 305 of MORT&H specifications. (In case of link roads earth work to be done by villagers)

Cement concrete 1:3:6 (a) with stone ballast or shingle (ii) mixing by mechanical means using concrete mixer volumetric type

Reinforced cement concrete M-25 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth

Reinforced cement concrete M-30 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth

Reinforced cement concrete M-40 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth

Cold twisted detormed (Ribbed/ Tor steel) Bars (Fe 500 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including bending and binding placing in position complete

Wrought iron & Mild steel ladders, framed grills, gratings etc. with ends of bars riveted or molded forged framed window guards, barred iron doors stair case iron railing etc. including cost of bolts and nuts, screws, welding rod complete fixing in position

Centering and shuttering for faces of walls, partitions, retaining walls and the like (vertical or battering including attached pilasters buttresses etc.

Weaving wire netting for wire crates including binding sides and partitions to make crate of 15 cm x 15 cm or 25 cm x 7.5 cm mesh.

Filling stones or spalls into crates and hand packing

Stone or Kankar block pitching:- ((b)) On slopes of guide bandh and protection works

Applying priming coat with metal primer on new steel or iron work including preparation of surface.

Finishing with epoxy paint two or more coat at all locations prepared and applied as per manufacturer specifications complete.

Filler joint ((iii)) Providing and fixing in position 20 mm thick premoulded joint filler in expansion joint for fixed ends of simply supported spans not exceeding 10 m to cater for a horizontal movement upto 20 mm, covered with sealant complete as per drawing and technical specifications.

Providing, Laying , fixing & jointing of P.V.C. Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications. (xxiii) 160mm o/d PVC pipe of 4 Kgf. / sqcm

Providing and laying, jointing, fixing, testing ISI Marked G.I. Pipe (as per IS 1239) B- Class, including cost of Specials such as tees, bends, sockets elbow etc., cutting, threading and testing in trenches in the ground complete. (i) 100mm i/d

Providing and fixing in position SS Grating with frame of approved make (to the approval of engineer in charge) complete in all respects.

Supply of boulder stone as per PWD specification from govt. approved quarry to stack and yard with an average lead upto 65 km from Mirthal including carriage loading, unloading etc. complete in all respect

Providing, fixing and rehandling if any of Grease nipple complete in all respects as per design and P.W.D. specifications and instructions of engineer in charge.

HIRE CHARGES OF MACHINERY (13) Cranes 35 tonnes

Providing, fixing and rehandling of Gate Wheel Assembly complete in all respects as per design and P.W.D. specifications and instructions of engineer in charge. 150 dia

Providing of Hollow Bulb seal & Fixing in position including preparation of surface complete in all respects and to the entire satisfaction of Engineer in charge.120/44

Providing Fixing in position of flat/wedge seal including preparation of surface complete in all respects and to the entire satisfaction of Engineer in charge. Dia 75mm X 12mm Th.

Providing and fixing of MS Spindle with double start or triple start of 1.5 T Capacity complete in all respects and to the entire satisfaction of Engineer in charge.

Commissioning & testing of Gates at site Complete in all respects and to entire satisfaction of Engineer-in-charge.

Supply of multipurpose synthetic hetive grease complete in all respects and to the entire satisfaction of engineer-in-charge.

Supply of Multigrade Mobile oil 10w-40 or 10w-50 complete in all respects and to the entire satisfaction of engineer-in-charge.

CI Housing Cover with worm & worm wheel assembly shaft,,handle GM bust with triple start threading inside for spindle complete including labour

Star construction company (BID ID -632806)