PROVISION OF WORK STATION FOR NODES IN DESIGNATED EXAMINIATION CENTRE SOLAR EMERGENCY LIGHTING FACILITY FOR ATH HANGER DEFICIENT PARKING SHED FOR MCPO CPO MD ACCN SPECIAL REPAIRS FOR REPLACEMENT OF CEILING FAN EXHAUST FAN AND GEYSER AGAINST BER SURVE

Amount

Supply and fix powder coated anodised aluminium frame (100/40 mm) for Partitions with one or more rebates (minimum thickness of powder coating 50 micron) including joining cleat for fixing etc. complete all as specified and as directed

S & F 19 mm thick prelaminated particle board Interior grade pre laminated both sides with decorative choice laminations fixed in partition on aluminium frame work all as specified and directed

S & F 6 mm thick teak wook lipping to Particle board complete all as specified and as directed

S & slide Anti rust treated Telescopic Ball bearing Drawer Channel (400mm), complete all as specified and directed

S & f magnetic white sheets/boards for side board complete all as specified and as directed

S & F fabric sheet/material for partition board complete all as specified and as directed

Material and labour point wiring with 1.5 Sqmm single core PVC insulated FRLS unsheathed multi stranded copper conductor drawn into including PVC concealed (fixed on wall/roof/ceiling etc), conduit of size not less than 20 mm dia and including provision of 1.5 Sqmm single core PVC insulated FRLS unsheathed multi stranded copper conductor as earth wire and cast iron / pressed steel treminal boxes for mounting switches, sockets, fan regulator etc with 3 mm thick plastic laminated sheet cover complete for the following :-

One 3 pin socket outlet 5 Amps, same board with cables 1.5 Sqmm size.

One 3 pin socket outlet 5 Amps, indipendent board with cables 1.5 Sqmm size.

All as per item ser no-7 above here in before but one 3 pin socket outlet 5/15 Amps, indipendent board with cables 4.0 Sqmm size.

M&L for sub main wiring for phase and neutral with PVC FRLS insulated unsheathed multi stranded along with earth wire FRLS PVC insulted copper conductor, single core cable in and including surface/concealed /PVC conduit of appropriate size 2x 6.0 sqmm and 1x 6.0 sqmm as earth wire Note:- : 1. Cutting chases for concealed wiring shall be measured and paid seperately.

M&L for cutting chases on brick walls concrete surfaces not exc 10cm girth and making good in cement mortar (1:3) the existing surface after carryiing out the concealed wiring including necessary finishes all as directed.

S & F sheet metal enclosure vertical TPN MCCB DB 8 way double door with spreader terminals, insulating phase barrier and hardware with neccesary arrangements all as specified and directed Note:- (i) MCCBs and MCBs shall be measured and paid separetly under the respective item of schedule.

Suuply and fix for MCCB 4 Pole, 415 V, adjustable Thermal & Magnetic setting type type 100 Amps with breaking capacity 25 KA complete all as specified and as directed.

Supply and fix MCB SP 230 V, 6 -32 Amps with breaking capacity 10KA C curve complete all as specified and as directed.

Supply and fix erect Stainless Steel Cable Tray Trunking with 2 mm (tk) made up of stainless steel with coupler plates tee horizontal bend etc with couplaer plates,tee,horizontal bend, vetical, etc with neccessery arrangements to fix on complete all as specified and as directed

Material and labour for sub main wiring for phase and neutral with PVC FRLS insulated unsheathed multi stranded along with earth wire FRLS PVC insulted copper conductor, single core cable in and including surface /concealed /PVC conduit of appropriate size 2x4 sqmm and 1x4 sqmm as earth wire complete all as specified and as directed by Engr-in-charge. Notes: (i) Cutting chases for concealed wiring shall be measured and paid seperately. (ii) Rates are including taking down old unserviceable. Make for Cable for srl item No 7, 8 &14 :- Finolex / Polycab / Plaza / KEI / Havells Make for conduit srl item No 7, 8 &14:- Sudhakar / Avon plasto / Finolex

Supply, fixing and testing of Energy saving, environment friendly & robust Highbay/Mediumbay LED IP65 luminaire with high efficacy for 150 Watts light fitting with all connecting necessary arrangements of nut, bolts, welding works etc all as specified and as directed by Engr-in-charge/GE. Make : Crompton cat ref LHBN -150-CDL/60-M/Surya cat ref SLE RHB 150W ORION or equivalent make Philibs/Havells. Note - (i) Quated rate is deemed dto be included the charges of Boom lift, tools and plants etc as per site requirement and MS work complete as per site requirement.(ii) Contractor should submit warrenty certificate for 5 years from manufacturer.

S&F MCB,DB SPN 8 way double door DB with 200 amps rated copper bus bar in SS enclosure double door type. Note : MCB SPN/SP shall be measured and paid under the respective item of the schedule.

Supply and fix for MCB SPN 230 V, 40-63 Amps with breaking capacity 10KA C curve complete all as specified and as directed by Engr-in-charge.

S & F Solar OFF Grid Inverter(PCU) -3 KVA MPPT controllers with full automatic functionality including solar PV Module 335Wp, MS structure with aluminium clamps and rails, AC & DC box and accessories, cables, switch gears, earting etc, with advanced DC surge protection device, Battery C10 150 AH lead acid and Dusk dawn controller quick sensor incl neccessary arrangements etc all as specified and as directed.

Surface excavation not exc 30 cms deep and averaging 15 cm deep and getting out Hard/ Dence soil complete all as specified and as directed by Engr-in-charge.

Material and labour for hardcore of gauge not exc 63mm, deposited, spread and levelled in layers not exc 15cm thick, watered and rammed to a true surface broken stone boulders complete all as specified and as directed.

Material and labour for 100 mm thick cement concrete type D2 1:4:8, (using 40mm graded stone aggregate)as in sub base all as specified and as directed

M & L for sand filling as a cushioning / bedding under floors or in foundations including watering and consolidation complete all as specified and as directed by Engr-in-charge Note: Punned Thickness only measured for payment

M& L for machine pressed precast concrete interlocking paver block with pigment, rubber moulded wax finished, any shape and size confirming to IS 15658-2006 of 60mm thickness, M-40 grade complete all as specified and directed by Engr-in-charge.

Material and labour for old size brick work with sub class 'B' old size bricks straight or curved on plan exc. 6.00 m mean radius in cement mortar 1:4 complete all as specified and as directed by Engr-in-charge.

Material and labour for PCC 1:2:4 type B 1 (Using 20mm graded stone) as in coping of wall, water troughs and the like including weathering slightly rounded for chamfered angles and thorating complete all as specified and as directed by Engr-in-charge.

M&L Rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 complete all as specified and as directed.

Excavating in post holes (or similar holes) each n exc 0.5 cum in hard/dense soil, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around in laters not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface complete all as specified and as directed by Engr-in-charge.

M & L for cement concrete type C2 1:3:6 (20mm graded aggregate) in walls or retainig walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts complete all as specified and as directed by Engr-in-charge.

S&F structural steel works as in tubular roof trusses, purlins, vertical posts, crane grantries, rails and fastenings and heavy bracket framing (beam, tee angle tubular pipe, channel or flat sections) including distance pieces, cleats, MS plate riverting incl bending and welding, conforming to Fe-410W Gde E-250 quality A complete all spd and as directed.

S&f Structural steel works including stringers, treads, landings, baulster, hand rails including cleats, brackets etc., conforming to Fe-410W Gde E-250 quality A complete all as specified and as directed.

Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5 cm long with diameter of shank of 16 to 20 mm

Supply and fix pre painted galvalume aluminium Zinc coating GI based corrugated steel sheet cureved at edges having 0.50 mm thick of an colour having tensile strength of 550 MPA as in foof covering/cladding to wall, fixed with self tapping screws all as specified and as directed.

M&L for two coat of synthetic enamel paint over one coat of red oxide priming including preparation of new steel surfaces over 10 cm width or grith not otherwise described.

M&L for preparing new wall surfaces and applying two coats of cement base paint over one coat of primer complete all as specified and as directed by Engr-in-charge

Supply and fix in replacement of energy saving ceiling fan star rating with down rod, double ball bearing and all standard accessories to work on single phase 230 volts, 50Hz of 1200 sweep all specified and as directed. Make Crompton Model reference HS plus / Balaji Model ref Speedster X 1200 mm (Ceramic White CF)/ Khaitan Model No: Smart Air 3 Blade (white) / Orient Electric Energy star (Crystal white)

Supply and fix in replacement of heavy duty exhaust fan with louvers, 300 mm sweep, AC, single phase, 230 volts complete all as specified. Make Almonard/Khaitan/Bajaj/Crompton

Supply and fix in replacement of storage water heater vertical type capacity 50Ltr with 5 star rated. Make : Havells/Bajaj/Racold

Supply and fix in replacement of storage water heater vertical type capacity 25Ltr with 5 star rated. Make : Havells/Bajaj/Racold

Supply and fix hot water/cold water connection pipe with check nuts and washers in existing position including taking down old u/s all as specified and directed. Make: Prayag/Parryware/Seiko/Jaguar

KRISHNA ENTERPRISES

Banyan Engineers and Contractors

SIVA ENTERPRISES

K R ENTERPRISES

R.P.TRADERS

D.KUMAR

RK ENTERPRISES

SREE BALAJI ENTERPRISES