Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹40.6 LAccepted-AOC | L1 | Accepted-AOC BEING L1 | |
| 2 | L2₹41.0 L+₹31,581.40 (0.78%)Rejected-Finance | L2 | Rejected-Finance BEING L2 | |
| 3 | L3₹41.7 L+₹1.0 L (2.49%)Rejected-Finance | L3 | Rejected-Finance BEING L3 | |
| 4 | L4₹43.9 L+₹3.2 L (7.85%)Rejected-Finance UNIT NO 7 MOUNT VIEW CO OP HOUSING SOCIETY LIMITED MUMBAI MANKHURD 400 088 | MUMBAI SUBURBAN | MAHARASHTRA | 400088 | L4 | Rejected-Finance BEING L4 | |
| 5 | L5₹46.9 L+₹6.2 L (15.4%)Rejected-Finance | L5 | Rejected-Finance BEING L5 |
Tender Value
₹44 L
EMD Value
₹88,000
Closing Date
7 Mar 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE AF THANE
Office of Military Engineer Services ,Garrison Engineer (AF) Thane, Kolshet Road, Sandoz Baugh Post, Thane 400607
ADDITION, ALTERATION / IMPROVEMENT TO CERTAIN MD ACCN BUILDINGS AND CERTAIN MINOR WORKS AT SITE P AFS THANE UNDER GE AF THANE
2023_MES_579780_1
8254/E8
Open Tender
Civil Works
Item Rate
180 days
THANE
AS PER NIT
8 documents required · 8 mandatory
₹500
GE AF THANE
₹88,000
Yes
2 May 2023
8 Feb 2023
8 Mar 2023
8 Feb 2023
7 Mar 2023
23 Feb 2023
8 Feb 2023 - 23 Feb 2023
Amount
M&L for Cement concrete in posts / columns to support Steel structure with Type B-1, 1:2:4 (using 20 mm graded stone aggregate) , complete all as specified and as directed by the Engr- in- Charge.
S&F for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 , complete all as specified and as directed by the Engr- in- Charge.
S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws , complete all as specified and as directed by the Engr- in- Charge.
S&F Pre- painted galvatume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws , complete all as specified and as directed by the Engr- in- Charge.
M&L for Preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and as directed by the Engr- in- Charge.
S&F mild steel screw bolts of 11 to 18 diameter of neck in mm (machine made) with hexagonal or square heads at one end and screwed both ends each screwed end to be fitted with washers and one hexagonal or square nut nexc 5 cm long, complete all as specified and as directed by the Engr- in- Charge.
M&L MS work flat iron, MS plates as in brackets, cleats, fasteners, wind ties, supports, base for posts etcwith riveted, bolted or welded attachment ,complete all as specified and as directed by the Engr- in- Charge.
S&F pipes 100 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls / vertical surfaces for rain water collection and conveyance , complete all as specified and as directed by the Engr- in- Charge.
S&F pipes 140 mm dia PVC (SWR) half round pipes as eaves gutters in any length with rubber ring joints fixed to GI sheets for rain water collection and conveyance , complete all as specified and as directed by the Engr- in- Charge.
S&F pipes 140 mm dia PVC (SWR) stop end with outlet fixed to GI sheets for rain water collection and conveyance , complete all as specified and as directed by the Engr- in- Charge.
M&L for Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 ® , complete all as specified and as directed by the Engr- in- Charge.
Removing existing water proofing treatment where so ever exist (exept concrete padding) and removing debris/rubbish off the site , complete all as specified and as directed by the Engr- in- Charge.
M&L for opening out cracks,Cutting out cracks to V-section in existing roofs or terracing, cleaning out and filling solidly with a hot mixture of bitumen and clean dry sand 1:1 (by weight) , complete all as specified and as directed by the Engr- in- Charge.
M&L for rendering as screed bed in CM 15mm thick (1:4) cement plaster on roofing as padding fair faces of brick work or concrete surfaces even and smooth without using extra cement , complete all as specified and as directed by the Engr- in- Charge.
Supply only water proofing compound , complete all as specified and as directed by the Engr- in- Charge.
Material and labour for water proofing treatment with APP based standard membrane having minimum thickness 3mm over PCC padding in roof with the following courses of treatment for:- (a) Apply bituminous primer (IS 3384)85/25 @ 0.40 Kg per sqm of the surface area including cleaning the surfaces complete all as specified. (b) Apply APP plastomeric bitumen based mineral finished water proofing membrane having minimum thickness 3mm ,polyester reinforced(4 Kg/Sqm) with 10cm over laps and torch bonded at joints including surface preparation before and after application of treatment as per manufactures instruction complete all as specified. (c) Over the membrane provide a solar reflective heat resistent bituminous aluminium paint @ 0.1 Lit/sqm prescribed by manufacturer complete all as specified.
Surface excavation n.exc (not exceeding) 30cm deep and averaging 15cm deep and getting out Hard / dense soil , complete all as specified and as directed by the Engr- in- Charge.
Demolition of reinforced Concrete of any description and in any position not otherwise specifically provided for chajja, fins, louvers, parapet, floor, Roofs, floors (other than ground floors), beams, staircases,landing, and similar suspended work (reinforcement cut as required to facilitate demolition) etc from any by hammering carefully of concrete with necessary scafolding and protection as required , complete all as specified and as directed by the Engr- in- Charge.
Demolition of concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) , complete all as specified and as directed by the Engr- in- Charge.
M&L for plain Cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate as in foundation, filling and mass concrete , complete all as specified and as directed by the Engr- in- Charge.
M&L for Pre-cast cement concrete block masonry with solid blocks set in CM 1:6 exc.10 cm in width , using precast cement concrete type-C1 1:3:6 ( 20mm graded stone aggregate) , complete all as specified and as directed by Engineer-in-Charge.
M&L for Non skid ceramic coloured tile 7 to 8 mm thick area of each tile exc 0.18 sqm but not exceeding 0.38 sqm in floor set and jointed in neat cement slurry and point in white or coloured cement to match colored tile over 15 mm screed in CM 1:4 ,complete all as specified and as directed by Engr-in-charge.
M&L for Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors over & including screed of 15 mm thick in cement mortar (1:4) ,complete all as specified and as directed by Engr-in-charge.
M&L for 75mm thick cement concrete work 1:4:8,Type D-2 as in sub base for floor, using 40mm graded stone aggregates ,complete all as specified and as directed by Engr-in-charge.
M&L Brick hardcore of gauge n.exc 63mm deposited, spread and leveled in layers not exc 15cm thick, watered and rammed to true surface ,complete all as specified and as directed by Engr-in-charge.
M&L for Cement concrete (1:3:6) type C-2 using 40 mm graded stone aggregate as in plinth protection, 75 mm thick, surfaces finished even and fair without using extra cement as in plinth protection including provision of construction joints, complete all as directed by Engr-in-Charge and complete all as specified.
M&L for Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement ,complete all as specified and as directed by Engr-in-charge.
S&F aluminium anodized barrel tower bolt 150 mm size, extruded section and fixed long, complete all as specified and directed by Engr-in-Charge.
S&F extruded aluminium alloy handles 150 mm size, fabricated type, anodised , complete all as specified and directed by Engr-in-Charge.
S&F mild steel Butt hinges 100mm size ,medium weight ,colled rolled , complete all as specified and directed by Engr-in-Charge.
S&F Aluminium alloy, anodised, sliding door bolt 200mm dia with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed etc , complete all as specified and directed by Engr-in-Charge.
S&P Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors,windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of required dia and size,including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings or as per SSR P-I ,complete all as specified and directed by Engr-in-Charge.
S&F 4mm thick, Figured glass sheet glass ordinary quality and glazing, with oil putty or with wooden beads (supplied along with shutters) in Squares n.exc 0.5 Sqm each , complete all as specified and directed by Engr-in-Charge.
S&F Galvanized mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture not more than 1.18 mm and fixed with tinned tacks or galvanized wire staples, complete all as specified and directed by Engr-in-Charge.
Taking down Chowkhats or frames with shutters (without taking off shutters from the frame n exc 1.5 sq. m each ,complete all as specified and directed by Engr-in-Charge.
Taking down Chowkhats or frames with shutters (without taking off shutters from the frame exc 1.5 sq. m but n exc 4 sq. m each, complete all as specified and directed by Engr-in-Charge.
M&L Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings or as per SSR P-I and the directions of Engineer-in-charge.
M&L for 3.00 mm thick plain sheet ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane, complete all as specified and directed by Engr-in-Charge.
M&L for 3.00 mm thick plain sheet ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane , complete all as specified and directed by Engr-in-Charge.
S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around opening, all complete as per requirement , complete all as specified and directed by Engr-in-Charge.
M&L machine cut cudappa stone slab 15-20mm thick over 15 mm thick 1:4 cement mortat as backing coat base as in jambs and soffits of lintel laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl rubbing and polishing , complete all as specified and directed by Engr-in-Charge.
M&L for Providing, cement concrete(1:3:6) tpye C-1 (20 mm graded aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed by Engr-in-Charge.
S&F extruded aluminium alloy handles 100mm fabricated type, anodised , complete all as specified and directed by Engr-in-Charge.
S&F stainless steel wire mesh of 0.36mm dia of wire and average width of aperture 1.40mm & fixed with tinted tacks of galvanised over staples ,complete all as specified and directed by Engr-in-charge.
Excavating in post holes (or similar holes) hard and dense soil, each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm ,complete all as specified and directed by Engr-in-charge.
M&L for Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) etc Fe 410 -W (Gde- E- 250) quality-A , complete all as specified and directed by Engr-in-Charge.
Supply only GI wire chain link fencing minimum 3mm thick (excluding PVC coat) (Minimum wt 2.5kg/sqm) , UV resistant ,1mm dia PVC coated ( thickness of coating) 75X75mm mesh size,complete all as specified and directed by Engineer-in-Charge.
Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire ,complete all as specified and directed by Engineer-in-Charge.
S&F for Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 410-0 or Fe 310-0 ,complete all as specified and directed by Engineer-in-Charge.
S&F for Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long ,complete all as specified and directed by Engineer-in-Charge.
S&F Mild steel round bars 10mm dia cut to length bent to shape as required as in chain link fencing strengthening bars.Fe-410-W(Gde.E-250) quantity-A or Fe 290 (Gde-E-165) ,complete all as specified and directed by Engineer-in-Charge.
M&L for Framed work (Fe 410 -W (Gde- E- 250) quality-A ) as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing ,complete all as specified and directed by Engineer-in-Charge.
MSK Everlast Enterprises
M/S VISHRANTA CONSTRUCTION
Joy builders
Nissan Electricals
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .