Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹79.4 LAccepted-AOC | L-1 | Accepted-AOC L-1 | |
| 2 | L-2₹92.4 L+₹12.8 L (16.1%)Rejected-Finance | L-2 | Rejected-Finance Not found L-1 | |
| 3 | L-3₹1.0 Cr+₹22.4 L (28.1%)Rejected-Finance | L-3 | Rejected-Finance Not found L-1 | |
| 4 | L-4₹1.1 Cr+₹25.5 L (32.1%)Rejected-Finance | L-4 | Rejected-Finance Not found L-1 | |
| 5 | L-5₹1.1 Cr+₹26.0 L (32.6%)Rejected-Finance | L-5 | Rejected-Finance Not found L-1 |
| Sl No | Description | Qty | Unit | Moti lal kapila L1 | ABTAR SINGH AND COMPANY L2 | H.N.SINGH AND COMPANY L3 | M/S. Mast Ram Jaswal And Co. L4 | popular pipes L5 |
|---|---|---|---|---|---|---|---|---|
| 1.00 | Drilling, owering of assembly of T/wells:- Transportation of Rig along with allied accessories etc. complete including errection and levelling at site, through all kinds of roads, approaches fields etc.in all leads and lifts completed in all respects as per the directions of Eng.- in-Charge. | 6 | Per Job | - | - | - | - | - |
| 2.00Drilling of bore as per specification laid down in IS 2800-1991 (part-I) with upto date ammendments, if any,with percussion Rig /Direct Rotary Rig or combination drilling Rig. starting with 650-600 mm dia M.S pipe reduced to 450-400 mm dia M.S pipe confirming to IS 4270-2001 with up-to-date ammende-ments ,if any, in all kind of soils, boulders, rocks, collapsible strata, saturated soils,artesian conditions including the cost of all consumable, stores,water, fuel, lubricants and other accessories etc. complete in all respectsd as per the directions of the Engineer -in -Charge. | ||||||||
| 2.01 | Drilling and lowering of M.S casing pipes confirming to IS 4270-2001 with up-to-date ammendments,if any, of suitable sizes as mentioned above,from 0-30 mtrs below ground level within all leads and lifts. | 180 | Per Rmt. | - | - | - | - | - |
| 2.02 | Drilling and lowering of M.S casing pipes confirming to IS 4270-2001 with up-to-date ammendments,if any, of suitable sizes as mentioned above,from 30-60 mtrs below ground level within all leads and lifts. | 180 | Per Rmt. | - | - | - | - | - |
| 2.03 | Drilling and lowering of M.S casing pipes confirming to IS 4270-2001 with up-to-date ammendments,if any, of suitable sizes as mentioned above,from 60-90 mtrs below ground level within all leads and lifts. | 180 | Per Rmt. | - | - | - | - | - |
| 2.04 | Drilling and lowering of M.S casing pipes confirming to IS 4270-2001 with up-to-date ammendments,if any, of suitable sizes as mentioned above,from 90-140 mtrs below ground level within all leads and lifts. | 255 | Per Rmt. | - | - | - | - | - |
| 2.05 | Drilling and lowering of M.S casing pipes confirming to IS 4270-2001 with up-to-date ammendments,if any, of suitable sizes as mentioned above,from 140-150 mtrs below ground level within all leads and lifts. | 10 | Per Rmt. | - | - | - | - | - |
| 3.00 | Collection,preservaion and display of suitable size sample box with top lid and locking arrangement till handing over of the tube well to the department complete in all respects as per direction of the Engineer -in-Charge. | 6 | Each | - | - | - | - | - |
| 4.00 | Supply and lowering of IS marked Electric Resistance Welded M.S. pipe 300 mm dia nominal size housing, 8 mm thick having out side dia mtrs. 323.90 mm bevelled edge confirming to I.S. 4270-2001 with up-todate amendments, if any ,about 4 mtrs to 7 mtrs in length, welded without any circumferential joints, into bore hole in vertical position including cost of all scaffolding derricks, poles, clamps embedded in foundation etc. including cost of all cutting, threading and welding of pipes etc. within all leads and lifts,complete in all respects as per the directions of the Engineer -in-Charge. | 331 | Per Rmt. | - | - | - | - | - |
| 5.00 | Supply & Lowering at site Electric Resistance Welded (ERW) Stainless Steel Cage type "V" wire wound screens of size 300 mm ,8 mm thick with slot opening 1.0 mm,as per IS 8110-2000 with upto date amendments,if any, and material specification as per AISI"American Iron and Steel Inst" Type Grade SS-304 in suitable lenghts as per site conditions, including the cost of SS socket 8 mm thickness of length 140 mm, conforming to AISI grade 304, suitable to accomodate screen and ring including jointing screen with blind pipes complete in all respects i/c.cost of all scaffolding derricks, poles,clamps, embedding in foundation etc. including cost of all cutting, threading and welding of pipes etc. within all leads and lifts complete in all respects as per the directions of the Engineer - in - Charge.Screen will be of continuous trapezoidal wire spirally wound around fabricated cage.The wrapping wire having "V" shaped (Wedge) profile wire with flat surface on the outside and producing expanding slots on the inside of various dimensions, resistance welded to a cylindrical body made of number of longitudinal special high tensile support rods to provides smooth unrestricted bore which are in turn welded into cylindrical ring couplings on both sides of screens. | 9.5 | Per Rmt. | - | - | - | - | - |
Tender Value
₹74.6 L
EMD Value
₹1.1 L
Closing Date
30 Jul 2020, 5:00 pmClosed
Executive Engineer Jal Shakti Division No.I Una
Executive Engineer Jal Shakti Division No.I Una
SH Drilling, Lowering of assembly development of 3 No. T/well 125 mtrs deep at Malahat, Chnderlok Colony and Nanran, 2 No. T/well 140 mtrs deep at Rampur Jankour and 1 No. T/well 150 mtrs deep at Behdala).
2020_HPIPH_38912_1
No.IDU-I/E-tender20-3177-3210 dt 14-07-2020
Open Tender
Civil Works
Item Rate
90 days
Una consty Una Block Distt Una HP
as per NIT
8 documents required · 8 mandatory
₹800
Yes
Executive Engineer Jal Shakti Division No.I Una
₹1.1 L
Yes
17 Nov 2025
15 Jul 2020
31 Jul 2020
15 Jul 2020
30 Jul 2020
15 Jul 2020
15 Jul 2020 - 30 Jul 2020
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .