SPECIAL REPAIR TO CERTAIN EM SERVICES OF CE AF PRAYAGRAJ OFFICE AT AF STN BAMRAULI

Amount

Taking down carefully aluminium batten point, wiring for light/fan/socket/bell or power point including. All fittings i.e. switch, sockets, ceiling rose, regulators, batten holders, etc. Complete and making good disturbed surfaces of wall/floor to match with the surroundings of wall/ceiling/floor etc including taking down old light fittings. Note :- (i) Contractors quoted rate of this item deemed inclusive of unscrewing of the serviceable fittings and fixture as directed and deposit in MES store yard. (ii) Quoted rate also deem to be included cost of cutting chases for taking out concealed conduit and nitch for terminal box. (iii) Decision of GE shall be final and binding in respect of serviceability of fittings/fixture.

M & L for Point wiring complete with 1.5 sqmm single core PVC insulated FRLSH cable 1100 volts grade with multi stranded copper conductor drawn through new PVC concealed conduit mediem grade, ISI marked and including provision of 1.5 sqmm PVC insulated copper cable FRLS as earth continuty, fabricated branded modular metal flush box duly make embossed, concealed in walls with suitable modular inner and outer plate for housing switches , socket outlet and fan regulators etc, complete all as specified and as directed for the followings:-

(a) One light/fan/bellpoint controlled by one switch single pole one way

(b) All as per item No 1 here-in-before but one 3 pin 6 amp switch socket out let independent .

(c) All as per item No1 here inbefore but one 3 pin 6 amps socket outlet on the same board with other switch complete .

All as per item No 1 here-in-before but using 02 Nos. 2.5 sq mm size for main cable and 01 No.2.5 sq mm size as earth conductor for one 16 Amp switch socket outlet on independent board.

Supply and fix switch modular flush 6A single pole one way ISI marked

Supply and fix modular sockets 6 Amp 2 in 1 2/3 pin combined all as specified and directed.

Supply and fix switch modular flush type 15/16 Amp single pole one way 240 volt one module ISI marked

Supply and fix modular sockets 16 Amp 2 in 1 3/5 pin combined all as specified and directed.

Supply and fix ceiling rose surface bakelite 60x25mm three terminal

Supply and fix electronic step type fan regulator 240 volt 50 Htz 120 watt (switch/sockets type in shape) modular type

Supply and fix in repairs switch modular flush 6A single pole one way ISI marked (Note : item 10 to 28 considered for replacement of existing conventional accessories ie Switch Sockets and concealed boxes etc.)

Supply and fix in repairs modular sockets 6 Amp 2 in 1 2/3 pin combined by replaceing of existing 5/6 Amps Sockets.

Supply and fix in repairs switch modular flush type 15/16 Amp single pole one way 240 volt one module ISI marked

Supply and fix in repairs modular sockets 16 Amp 2 in 1 3/5 pin combined all as specified and directed.

Supply and fix in replacement white cover plate with frame two module for modular switches and sockets complete all as specified and directed.

Supply and fix in replacement white cover plate with frame three module for modular switches and sockets complete all as specified and directed.

Supply and fix in replacement white cover plate with frame four module for modular switches and sockets complete all as specified and directed.

Supply and fix in replacement white cover plate with frame six module for modular switches and sockets complete all as specified and directed.

Supply and fix in replacement white cover plate with frame eight module for modular switches and sockets complete all as specified and directed.

Supply and fix in replacement white cover plate with frame twelve module for modular switches and sockets complete all as specified and directed.

Supply and fix in replacement white cover plate with frame Eighteen module for modular switches and sockets complete all as specified and directed.

Supply and fix metal flush box 1/2 modul 1.6 mm for mounting modular switches and sockets complete all as specified and directed.

Supply and fix metal flush box three module 1.6 mm for mounting modular switches and sockets complete all as specified and directed.

Supply and fix metal flush box four module 1.6 mm for mounting modular switches and sockets complete all as specified and directed.

Supply and fix metal flush box six module 1.6 mm for mounting modular switches and sockets complete all as specified and directed.

Supply and fix metal flush box eight module 1.6 mm for mounting modular switches and sockets complete all as specified and directed.

Supply and fix metal flush box twelve module 1.6 mm for mounting modular switches and sockets complete all as specified and directed.

Supply and fix metal flush box eighteen module 1.6 mm for mounting modular switches and sockets complete all as specified and directed.

Supply & fix MCB DB SPN 12 way, double door, IP-43, IK-09, Isolated Neutral Bar and fixed flush to wall and suitable for universal mounting complete all as specified and directed.

Supply & fix MCB DB SPN 8 way, double door, IP-43, IK-09, Isolated Neutral Bar and fixed flush to wall and suitable for universal mounting complete all as specified and directed.

Supply and fix MCB, single pole and neutral, 230 volts, 40 to 63 Amp rating, 'C' series fixed in DBs catered here-in-before.

Supply and fix MCB SP 6-32 Amps 240 volts 10 KA 50 HZ 'C' curve complete all as specified and directed by Engineer in charge

Sub main wiring with 2 run of single core PVC insulated and PVC Unsheathed, multistranded copper condutor of nominal area 1.5 sqmm FRLS, 1100 Volts grade cable drawn into and including rigid non metalic PVC Conduit of including all fittings and one run of PVC insulated and PVC unsheathed, multistranded copper conductor of nominal area 1.5 sqmm FRLSH 1100 volts grade cable continuous earth wire of green colour code complete. Note:- (a) Two runs of 1.5 sqmm cable and one run of 1.5 Sqmm cable as earth lead with conduit shall be measured as one unit length for payment. (b) Quoted rate shall deem to be included cost of cutting chasses in wall for concealling conduit and making good to match with existing finish.

Sub main wiring with 2 run of single core PVC insulated and PVC Unsheathed, multistranded copper condutor of nominal area 4 sqmm FRLS, 1100 Volts grade cable drawn into and including rigid non metalic PVC Conduit of including all fittings and one run of PVC insulated and PVC unsheathed, multistranded copper conductor of nominal area 4 sqmm FRLS 1100 volts grade cable continuous earth wire of green colour code complete. Note:- (a) Two runs of 4 sqmm cable and one run of 4 Sqmm cable as earth lead with conduit shall be measured as one unit length for payment. (b) Quoted rate shall deem to be included cost of cutting chasses in wall for concealling conduit and making good to match with existing finish.

Sub main wiring with 2 run of single core PVC insulated and PVC Unsheathed, multistranded copper condutor of nominal area 6 sqmm FRLS, 1100 Volts grade cable drawn into and including rigid non metalic PVC Conduit of including all fittings and one run of PVC insulated and PVC unsheathed, multistranded copper conductor of nominal area 6 sqmm FRLSH 1100 volts grade cable continuous earth wire of green colour code complete. Note:- (a) Two runs of 6 sqmm cable and one run of 6 Sqmm cable as earth lead with conduit shall be measured as one unit length for payment. (b) Quoted rate shall deem to be included cost of cutting chasses in wall for concealling conduit and making good to match with existing finish.

Sub main wiring with 2 run of single core PVC insulated and PVC Unsheathed, multistranded copper condutor of nominal area 10 sqmm FRLS, 1100 Volts grade cable drawn into and including rigid non metalic PVC Conduit of including all fittings and one run of PVC insulated and PVC unsheathed, multistranded copper conductor of nominal area 10 sqmm FRLSH 1100 volts grade cable continuous earth wire of green colour code complete. Note:- (a) Two runs of 10 sqmm cable and one run of10 Sqmm cable as earth lead with conduit shall be measured as one unit length for payment. (b) Quoted rate shall deem to be included cost of cutting chasses in wall for concealling conduit and making good to match with existing finish.

Supply and fix LED 2 X 2 ft backlite surface mounted fitting 36/40 Watts not less than 3200lm with Metallic CRCA powder coated body with high efficiency opal/PMMA diffuser with system efficacy > 80 lm/W, CRI>80, color temperature >5700k, IP 20, Power factor<0.95, THD<10%, 50000 burning hours , Ambient temperature 0 to 500 DegC, Driver should meet IEC complaint for safety, with voltage variation range of 150-270 V and surge protection of 2.5 KV including necessary fixing arrangementsfixed complete all as specified and directed.

Supply and fix in repair LED batten luminaire surface mounted, 4 feet system wattage of 20 Watts, > 2200 systems lumen outputwith lifetime of 50000 burning including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting fixed complete all as specified and directed.

Supply and fix in repair LED batten luminaire surface mounted, 2 feet system wattage of 10 Watts, > 1000 systems lumen outputwith lifetime of 50000 burning including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting fixed complete all as specified and directed.

S&F of Fresh air fan, single phase 230 volts of size 250 mm sweep, plastic body with louvers and making of hole & grouting nut & bolts and connecting with 3 run of 1.5 sqm, multicore, PVC insulated copper cable from ceiling rose and making good the disturbed surface with existing colour matching complete.

Supply & fix in repair factory made epoxy powder coated Load line Distribution Board TPN-4 ways with metal door (IP-43 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including insulated 200 Amp copper bus bar, Isolated neutral bar, standard DIN rail, Earth bar and cable ties for cable management, top and bottom removeable gland plates with knockouts and suitable for one TPN- MCCB 100 Amp as incomer and 6 to 63 Amp SP MCBs outgoing complete all as specified and conforming to IS : 8623.

Supply and fix in repair MCCB 160 Amps, FP 415 volts 16 KA 50 HZ with thermal magnetic setting complete all as specified and directed by Engineer in charge.

Supply and fix wall mounted fan 400mm, 230 volts , 50 Hz 1420 RPM with 90 degree oscillation and having speed control by two pull cord system all as specified and directed.

S & F sheet metal enclosure with socket and plug top and MCB single pole and neutral enclosure with two Pin and earth plug and socket complete with one single pole MCB, 240 V, 20 Amp.

Cutting the existing wall/removing existing steel bar to make a hole for fixing of exhaust fan through packing of wooden ply to support the ventilating/ air circulating fan including necessary nut and bolts of suitable size incl making good of disturbed surface complete all as directed by Engr-in charge.

S & F of exhaust fan 300 mm (Metal body) sweep complete with louvers including connecting with suitable size of copper conductor from ceiling rose to fan complete all as specified and directed.

Supply,installation,testing,commissioning of LT Panel of size 900x900x200 mm cubical compartmentalized, indoor type wall/floor mounted suitable for 415 Volt 3 phase 4 wire 50 Hz, AC supply system having bus bar chamber with duly insulated copper bus bar of rating 200 amps mounted on epoxy/SMC type insulator. The Panel shall be dust and vermin proof IP 42 class protection and made out of 2.00 mm SWG CRCA sheet, powder coated finish outside,front openable type for cable entry with locking arrangement internal wirig with PVC insulated flexible copper conductor with the following incoming and outgoing feeders including the writting of qtr Nos on LT Panels. (a) MCCB 200, 4 pole, 415volts 16KA=01 No (for incoming Mains and DG Set) Make:- Legrand or equivalent in L&T/SEIMENS/ ABB. (b) MCCB 125, 4 pole, 415volts 16KA=03 No (for out going ) Make:- Legrand or equivalent in L&T/SEIMENS/ ABB. (c) Euro- load change over switch 200 Amp, FP (d) MCB SPN 240 volts, 63 amps 10KA, C series -02 Nos Make- Legrand or equivalent in L&T/SEIMENS/ ABB. (e) MCB SP 6 to 32 Amp, 240 volts, 10KA, C series-1 Nos Make:- Legrand Cat No- 408587 , or equivalent in L&T/SEIMENS/ ABB. (f) Copper Bus bar 200A =1 set of four (g Set of indicating lamp(RYB) LED type -01

Ambrish Builders (BID ID -3141560)

Pleiad Complex On (BID ID -3149197)

VIKAS INDIA ENTERPRISES (BID ID -3142214)

Krishna Enterprises (BID ID -3145302)

bharat construction (BID ID -3149240)

A S ENTERPRISES (BID ID -3141246)

M/S MALHOTRA ENGINEERING WORKS (BID ID -3141711)

PRASHANT ENTERPRISES (BID ID -3149073)