Certain Aluminum Partition works at AIIMS Bibinagar

Certain Aluminum Partition works at AIIMS Bibinagar

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS:733 and IS:185, fixing wirh dash fasterners of required dia and size, including necessary filling up the gaps at junctions, i.e at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Alumium sections shall be smooth, rust free, straight mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/paneling, C.P brass/stainless steel screws, all complete as per architectural drawing and the directions of engineer-in-charge. (Glazing, Paneling and dash fasteners to be paid for separately)

For shutters of door, windows & ventilators including providing and fixing hinges/pivots and making provision for fixing of fitting whereever required including the cost of EPDM rubber/neoprene gasket required (Fitting shall be paid for separately)

providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS:12823 Grade-I Type II, in panelling fixed in alluminium doors, windows, shutters and partitions frame with C.P brass/stainless steel screw etc. complete as per architectural drawings and directions of engineer-in-charge. Pre-laminated particle board with decorative lamination on both sides.

Providing and fixing glazing in aluminium door, window, ventilator shutter and partitions etc. With EPDM rubber/neoprene gasket etc. Complete as per the architectural drawing and the directions of Engineer-in-charge (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5mm thickness (weight not less than 12.50 kg/sqm)

Providing and fixing extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS :3564. EMBOSSED ON THE BODY, DOOR WEIGHT UPTO 36 KG TO 80 KG AND DOOR WIDTH FROM 701 MM TO 1000MM), WITH DOUBLE SPEED SPPED ADJUSTMENT WITH NECESSARY ACCESSORIES AND SCREWS ETC COMPLETE.

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc, complete : 300x16 mm

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. Complete : 250x10mm Vide page No CMB

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade, witj necessary screws etc. Complete : 125mm

Providing and fixing aluminium hanging fllor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. Complete, single rubber stopper.

Providing and fixing Brass 100mm mortice latch and lock with 4 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making goods etc. Complete

spr constructions