Repair/ rewinding of ceiling, exhaust and wall mounting fans including repair/ replacement of certain internal E/M accessories at Tibri Mil Stn under GE Gurdaspur.

Amount

Taking down of ceiling fans 1200/1400mm sweep, AC, 230 volts of any make/ model and carrying out servicing by cleaning thoroughly using soap solution strip opening the motor and carrying necessary repair by replacing defective parts e.g. bearing, bushes, shafts etc as required, carrying out lubrication using proper grade oil/grease reassembling and refixing at site in any location of AOR GE GSP area complete all as directed. (Note :- Spares reqd for replacement shall be measured and paid separately as supply and fix in repair under relevant items).

M&L for re-winding of ceiling fans motor 1200 mm sweep, AC, 230 volt any make with super enameled copper winding wire of appropriate guage as per original size including cutting and getting out old burnt winding, varnishing and E class insulation varnish, providing insulation tape/ sleeves and making connection with three core copper flexible cable of size 23/0.0076mm of length not less than 0.50 metre with each fan complete all as specified and directed. Note : (i) Varnish shall be I brand shellac varnish. (ii) Motor shall be wound with machine only. (iii) Super enamelled copper wire shall be used for winding of fan.

All as per Ser Item No 02 here-in-before but of size 1400mm sweep.

S&F in replacement capacitor AC 230 volt 2.25 Mfd complete all as specified and directed.

All as per Ser Item No 04 here-in-before but of size 3.15 Mfd complete all as specified and directed.

All as per Ser Item No 04 here-in-before but of size 4 Mfd complete all as specified and directed.

S&F in repair ball bearing of size 6201 and 6202 complete all as specified and directed.

S&F in repair ball bearing of size 6203 complete all as specified and directed.

M&L for lathe work for any ceiling fan for taking out bush from the lower body part of rotor and replacing with suitable size of ball bearing 6200 to 6204 as per matching with shafts, making necessary bearing, boring, cutting, grinding, polishing of shaft complete all as specified and directed. (Bearing shall be measured and paid under respective item of schedule as supply and fixing in repair).

S&F in repair gun metal bush of ceiling fan any size complete all as specified and directed.

S&F in repair rubber reel of ceiling fan complete with MS split clamp 02 Nos nut and bolts complete all as specified and directed.

Taking down of exhaust fans 200mm to 450mm sweep, AC, 230 volts of any make and carrying out servicing by cleaning thouroughly strip opening the motor and carrying necessary repair by replacing defective parts e.g. bearing, bushes, shafts etc as required, carrying out lubrication using proper grade oil/grease reassembling and re-installing and refixing at site in any location of AOR GE GSP area complete all as directed. (Note :- Spares reqd for replacement shall be measured and paid separately as as supply and fix in repair under relevant items).

M&L for re-winding of exhaust fan motor size 400 mm sweep with super enameled copper winding wire appropriate guages as per original size including cutting and getting out old burnt winding, varnishing and E class insulation varnish, providing insulation tape/sleeves and making connection with 3 core PVC insulated and sheathed copper flexible wire of size 40/0.0076 mm of length not more than 0.5 Meter including painting complete all as directed. (Note - (i) Doctor brand or ISI brand varnish shall be used. (ii) Motor shall be wound with machine only. (iii) BIC/ HTP/DEVIDYAL make supper enamelled copper wire shall be used for re-winding).

All as per Srl item No 13 here-in-before but 450mm sweep.

All as per Srl item No 13 here-in-before but 200 to 350mm sweep.

S&F in replacement down rod of ceiling fan complete (Length of rod not less than 45 cm) complete all as specified and directed.

M&L for painting of ceiling fan 1200/1400mm sweep using two coat of synthetic enamelled white spray paint including preparation of surface by filling cavities and writing MES Nos of appropriate font size complete all as specified and directed.

S&F in replacement ceiling fan blade set suitable for 1200 mm sweep ceiling fan of an existing make complete all as specified and directed.

S&F in replacement ceiling fan blade set suitable for 1400 mm sweep ceiling fan of an existing make complete all as specified and directed.

S&F in replacement exhaust fan blade set suitable for 200mm to 350mm (metal body) of an existing complete all as specified and directed.

S&F in replacement exhaust fan blade set suitable for 400 to 450mm (metal body) of an existing make complete all as specified and directed.

S&F in repair bell ding-dong, 230 volts, single phase complete all as specified and as directed.

S&F in repair switch piano flush type 5 Amps one way, AC 230V, 50Hz complete all as specified and directed.

S&F in repair switch piano type 5 Amp two way AC 230 volts of any make/model as per existing complete all as specified and directed.

S&F in repair switch piano flush type 15 Amps single pole one-way, 230V, 50Hz complete all as specified and directed.

S&F in repair socket out let 2-in-1, 3 Pin 5 Amps flush type 230 volts complete all as specified and as directed.

S&F in repair socket outlet, flush type, 2-in-1, 3 pins, 5 & 15 Amps multipurpose complete all as specified and directed.

S&F in repair plug top 3 pin, 5 Amps complete all as specified and directed.

S&F in repair plug top 3 pin, 15 Amps complete all as specified and directed.

S&F in repair bell push switch piano flush type, 5 Amps complete all as specified and directed.

S&F in repair of ceiling rose three terminals AC 230 volts, PVC/ polycarbonate, isolated body of any make/model as per existing complete all as specified and directed.

S&F in repair fan motor suitable for 250mm sweep plastic body exhaust fan as per existing make all as directed.

S&F in repair PVC fan blade suitable for 250 mm sweep exhaust fan as per existing make all as directed

S&F in repair PVC outer cover suitable for 250 mm sweep plastic body exhaust fan as per existing make all as directed

S&F in repair modular switch one-way, 6 Amp, 1 module AC 230V, 50Hz complete all as specified and directed.

S&F in repair modular switch 16 Amps, one -way, 1 module AC 230V, 50Hz complete all as specified and directed.

S&F in repair modular switch socket outlet 3 pin 5 Amps one-way, AC 230V, 50Hz complete all as specified and directed.

S&F in repair modular switch socket outlet 3 pin 15 Amps one-way, AC 230V, 50Hz complete all as specified and directed.

S&F in repair LED tube rod 20W ultra bright LED polycarbonate tube light with very high efficacy suitable for fitting complete all as specified and directed.

S&F in repair surface mounting universal batten housing made of powder coated CRCA sheet suitable for upto 1 x 18/20 W LED tube rod single sided complete all as specified and directed.

S&F in repair fan motor suitable for PVC body exhaust fan of size 200mm sweep complete all as specified and directed.

S&F in repair PVC fan blade suitable for 200mm sweep exhaust fan complete all as specified and directed.

S&F in repair MCB SP 6 to 40 amps, AC 230 volts complete all as specified and directed.

S&F in repair MCB 10-40 amps single pole with neutral, AC 230 volts complete all as specified and directed.

S&F in repair batten type lamp holder insulated body with back plate suitable for batten fitting including PVC round block and taking out unserviceable lamp holder complete all as specifed and directed.

S&F in repair fan regulator electronic type 5 step minimum 100w 240V and connecting complete all as specified and directed.

S&F in repair MS machine screw 25 mm long suitable for fixing bakelite sheets / square blocks with sunken boards of dia not more than 5 mm complete all as specified and directed.

S&F in repair MS machine screw 50 mm long suitable for fixing bakelite sheets / square blocks with sunken boards of dia not more than 5 mm complete all as specified and directed.

S&F in relacement 1100 Volts grade heavy duty cable with PVC insulated aluminium stranded conductor served with an inner sheathing of PVC tape and over all PVC Sheathed in service connections, one twin core 6 Sqmm cable standard conductor cable flat or circular complete all as specified and directed by Engineer- in- Charge.

S&F in relacement 1100 Volts grade heavy duty cable with PVC insulated aluminium stranded conductor served with an inner sheathing of PVC tape and over all PVC Sheathed in service connections, one twin core 10 Sqmm cable standard conductor cable flat or circular complete all as specified and directed by Engineer- in- Charge.

S&F in repair multi strandard single core copper conductor FRLSH type 2.5 sqmm etc. complete all as specified and directed.

S&F in repair multi strandard single core copper conductor FRLSH type 1.5 sqmm etc. complete all as specified and directed.

Taking down old unserviceable KWH Meter and depositing to AGE E/M store yard for safe custody complete all as specified and directed.

S&F for AC single phase static energy meter of accuracy class 1.0, 240 volt, 50 Hz, backlit LED display of rating 10-60 Amps (Measure and displays KWH, V, I, KW, last month history of KWH & Mdin KW) with special features like TOD, tamper logging, optical communication port and display in absence of power with transparent hinge type box including one PVC box of size 12" x 10 " complete all as specified and directed.

S&F for AC three phase static energy meter of accuracy class 1.0, 240 volt, 50 Hz, backlit LED display of rating 10-60 Amps (Measure and displays KWH, V, I, KW, last month history of KWH & Mdin KW) with special features like TOD, Tamper logging, optical communication port and display in absence of power with transparent hinge type box including one PVC Box of size 12" x 10 " complete all as specified and directed.

S&F in repair octane 18 watt 4000K LED panel square slim compact aluminium die cast edge lit panel recess mounted square with opal diffuser and separate electronic driven of size 210mm x 210mm complete all as specified and directed.

S&F in repair octane 9 watt 4000k LED Panel round slim compact aluminium die cast edge lit panel recess mounted square with opal diffuser and separate electronic driven of size 138mm x138mm complete all as specified and directed.

S&F in repair octane 24 watt 4000k LED panel round slim compact aluminium die cast edge lit panel recess mounted square with opal diffuser and separate electronic driven 284mmx 284mm complete all as specified and directed.

S&F in repair indoor type decorative recess mounted direct/ indirect 2' x 2' lumanaries light fixture made 36 watt LED netural white complete including making connection with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed.

S&F in repair LED driver suitable for 36 watt 2'x2' panel ceiling fitting complete all as specified and directed.

S&F in repair LED driver suitable for 24 watt 284mm x 284mm panel ceiling fitting complete all as specified and directed.

M & L writing letters or figures as "GE GSP MES NO 0000" with thick synthetic enamel paint black of suitable size/ dimentions of appropriate font size for ceiling fan, exhaust fan etc.complete all as specified and directed by Engr-in-Charge)

A Schedule of Credit for old/unserviceable demolished/ dismantled items has been catered for in the tender. The Schedule of Credit is pre-priced by MES. The final amount of the tender shall be arrived at after deducting the total amount of Rs. 1,66,860.50 Schedule of Credit from the total amount of BoQ as per General Summary sheet catered for after Schedule of Credit.

Abrol brothers and company (BID ID -3278466)

HARPAL ENGINEERS AND BUILDERS (BID ID -3282374)

P S BUILDERS (BID ID -3277451)

Sharma Electrical and Engineering Works (BID ID -3280577)

JK ENTERPRISES (BID ID -3282032)

Durga Electricals (BID ID -3282201)

M/S BR ENTERPRISES (BID ID -3278294)

PAWAN KUMAR GOVT. CONTRACTORS (BID ID -3278601)

GE WORLD (BID ID -3278232)

VISHNU DUTT AGANIHOTRI & SONS (BID ID -3277840)