Urgent Repairs, Renovation and Repainting Works to the Premises of the Goa Human Rights Commission, Panaji, Goa.

Removing dry or oil bound distemper by scrapping sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 mts. lead.

12mm cement plaster 1:4 (1 cement : 4 fine sand)

Extra for providing and mixing water proofing material proportion recommended by the manufacturers.;12mm cement plaster 1: 4 (1 cement : 4 sand)

Repairs to plaster in patches of 2.5 sq.m. and under including cutting the patch in proper shape and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50m lead.;With cement mortar 1:4 (1 cement : 4 fine sand)

Dismantling wooden boarding in linings of walls & partitions excluding supporting members but including stacking within 50 meters lead.;Thickness above 19mm and upto 25mm

Providing & Fixing wall paneling made up of Aluminium Sections frame work of cross section 50x25mm spaced @ 120cm c/c and fixed to wall with screws & plugs and top fixed with 12mm thick marine grade ply conforming to IS-710 and top fixed with veneer 3.5mm thick of approved design including Melamine polishing and as per the direction of the Architect/Engineer in charge.

Removing old loose bottom or side cover of RCC slab beam columns etc. rubbing surface of concrete steel using wire brush and applying 2 coats of Alkaline rust converting primer (Feovert) after a waiting time of 6 hrs between coats and then applying another anti corrosive protective coating system ) for reinforcement bars (IPNet-RB) Conforms to IS-2770 Part-1 (Pull out Test) ASTM-3963-86 (Adhesion Test) and then applying concrete penetrating corrosion inhibitor (EPCO-KP100) and applying bonding new to old concrete (Epibond) Conforms to ASTM-C-882-87 and plastering on the fresh bond coat with Polymer Modified Mortar (Monobond) with 20mm C.M 1:3 and finishing coat of 6mm C.P 1:3 (1 Cement : 3 Sand ) incl. cost of transport etc. as per dir of EIC. All the chemicals will be of Krishna Conchem Products Pvt. Ltd. or Equivalent.

Providing and applying white cement based putty of average thickness 1.00mm of approved brand and manufacturer over the plastered wall surface to prepare the surface even and smooth complete.

Distempering two or more coats with oil bound washable distemper of approved brand and manufacture and of required shade on new work over and including a priming coat with distemper primer of approved brand and manufacture to give an even shade.