Karnataka

Active

Works

Buildings

Construction of additional one class room, library and science lab play ground with swing, slides and other equipment, compound wall, installation of rain water harvesting system, science lab equipment and interactive desktop computer with all in one printer for Govt. boys High School building at Ijeri village in Jewargi Taluka Dist Kalaburagi under KKRDB for the year 2024-25.

Rural Development and Panchayat Raj Department

RDPR Division Office Kalaburgi | Kalaburagi, Karnataka

Amount: ₹79.9 LCloses: 3 Jul 2026

Tender Value

₹79.9 L

EMD Value

₹1.6 L

Closing Date

3 Jul 2026, 9:30 pm

Similar Past Results

Similar tender results from the same govt authority in the past 3 years.

Tender Inviting Organisation

Name

Rural Development and Panchayat Raj Department

Work Description

Construction of additional one class room, library and science lab play ground with swing, slides and other equipment, compound wall, installation of rain water harvesting system, science lab equipment and interactive desktop computer with all in one printer for Govt. boys High School building at Ijeri village in Jewargi Taluka Dist Kalaburagi under KKRDB for the year 2024-25.

Tender Information

Tender ID

309567

Reference Number

RDPR/2025-26/BD/WORK_INDENT21846/CALL-2

Tender Type

Open

Product Category

Buildings

Location

RDPR Division Office Kalaburgi

Source Website

Subscribe to view

Documents Required

7 documents required · 7 mandatory

Technical Bid

Required1.The Tenderer shall have valid class III and above KPWD Licence

Required2.To qualify for award of this contract, Each tenderer in its name should have in the last five year i.e, 2021-22 to 2025-26 Achieved in at least Two financial years an average annual financial turnover not less than in all classes of civil engineering construction works only of Rs. 79.92 Lakhs. Attach certificated from C.A. on Letter Head. Two times amount put to tender. with UDIN No. otherwise bid will be directly disqualified

Required3.To qualify for award of this contract, Each tenderer in his name should have in the last five year i.e, 2021-22 to 2025-26 Satisfactorily completed, as a prime contractor, for at least one similar work of value not less than Rs. 39.96 Lakhs attach certificate by not below rank of Executive Engineer with Indent No. from eProcurement Portal

Required4.To qualify for award of this contract, Each tenderer in his name should have in the last five year i.e, 2021-22 to 2025-26 Satisfactorily executed quantities of works in any one year for continues period of 12 months 1.Earthwork Excavation / Embankment 38.95 Cum 2.TMT Steel 3.52 M.T. 3.BBM 46.37 Cum 4.Plastering 698.66 Sqm 5.Flooring 169.24 Sqm

Required5.Line of Credit Rs. 23.98 Lakhs should be enclosed in prescribed format unconditional

Required6.Bid Capacity on Letter of the contractor

RequiredThe tenderer or his identified sub-contractor should posses Authorized Dealer / Manufacturer / Supplier to supply the said goods items in the tender and satisfying the conditions as per bid document for Conditions refer bid document 21846 Goods Bid Document

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

Financial bids of the technically qualified bidders only will be opened

Right of acceptance or rejection of any or all tenders with or without any reasons is reserved with the undersigned or any concerned higher officers of the Department

Conditional tender will not be Considered

Tender processing amount will not be refundable

Contractors should have to upload the scan copy of all necessary qualification documents, and submit the original documents certificates while tender opening evaluation for verification

The Photos and Video graphs should be taken before commencement, during execution and after completion of the work in presence of nodal officers

The liquidated damage for whole of the works are Rs. 0.10 percent per day the maximum amount of liquidated damages for the whole of works is 10 percent of final contract price

The agency shall furnish affidavit stating that existing commitments furnished by him are true. If found false action shall be taken as per law

The bidder shall bear all costs associated with the preparation and submission of each tender and the employer will in no case be responsible and liable for those costs. The department is not responsible for any delay in accessing e-procurement portal

As per Karnataka State Government order No.LD 300 LET 2006 Bangalore Dated 01/01/2007 and Government Letter No.PW 134 BMS 2007 Dated 27/7/2007 a sum amounting to 1 percent of the bill amount will be deducted towards Construction Labour Welfare fund

The Item Rates quoted shall include cost of Royalty charges on construction materials and other taxes as per the prevailing Government Orders at the time of execution and including cost and conveyance of all materials, curing, loading and unloading, with all leads and lifts, labour, hire charges of all machineries and equipments and all incidental charges etc complete necessary for completion of work. All the Items shall be executed as directed by the Engineer-in-charge of the work

The field laboratory shall preferably locate, adjacent to the site with the required amenity as per the clause

Self declaration of machineries are not accepted

The work should be completed within the stipulated period from the date of agreement and The date of agreement itself is the date of commencement of the work

Third party inspection is mandatory for all the works in this programme

The Tenderer shall obtain the work done certificate in the prescribed form from the competent authority not below the rank of Executive Engineer (District Level Officer) and scan the Original Certificate and attach the scanned file to the Bid. The Original Certificate / Certificates shall be produced whenever required

Executive Engineer has authority to accept or reject any tender without assigning reason

Tenderer must submit his present accurate postal address and phone / cell phone number

For interpretations of clauses, conditions, spelling mistakes, etc., decision of Executive Engineer is final

The bidder must submit 5 years Profit and loss account obtained from Chartered Accountant (CA) Only.

The Furnished E.M.D. will be released only after successfully execution of the Tender Agreement by the successful Tenderer or bid validity days from the date of submission of Tender whichever is earlier

Before tendering for the works the tenderer may inspect the site personally

The successful tenderer shall maintain the work during the defect liability period of 12 months from the date of completion of the work

The Tenderer shall have valid KPWD license

Other details and instructions shall be seen and fallowed as per the bidding documents KW

The Road constructed under this programme shall be of high standard

Bidders should upload only prescribed documents for this work. If Unnecessary documents uploaded by the bidder then tender will be directly rejected and further correspondence will not be entertained declaration should be uploaded on bidders letter head duly signed

The work should be completed within 6 Months including Rainy Season

All Rates included with all lead, lifts, loading and unloading charges, cost and conveyance of all materials, labour, equipments incidental Charges, etc., complete. and as per specification and directions of the Engineer incharge of the work

Qualification and experience of the key technical and Management personnel in permanent employment with the Tenderer and those that are proposed to be deployed on this work if work is awarded Graduate / Diploma Engineer Civil 1 Nos. & Literate Assistant Any Degree Passed 1 Nos

All Terms and Conditions as per Bid Document

Incorrect Bid Capacity submitted by the Bidder will not be considered and the bid will be rejected

Bidders should upload only prescribed documents for this work if unnecessary documents uploaded then bid will be directly rejected

Profit and Loss Account / Audit Report Last 5 Year

Latest Income Tax

Name of the Equipment Machineries All machinery Documents are RC Book will be verified from E Vahan website if not found valid then bid will be rejected Tenderer should further demonstrate Owned Machineries This clause is Exempted upto 300 lakh Estimate cost

Arbitration Clause 24, As per Govt. Order LAQ LAC 198 2024 Dated 16.11.2024 (a)incorporations of Arbitration clauses in the Government Contractors / Tender in Exercise of the power conferred under the Section 21 of General Clauses Act, 1897 the Circular No.LAW 273 LAC 2012 (p) dt:10.01.2014 regarding incorporation of Arbitration in contract/tenders etc., is withdrawn with immediate effect

Technical Criteria

General

Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. xxxxx Lakhs)

Satisfactoriy completed (atleast 90%) as prime contractor at-least one such similar work of value not less than Rs. xxxxxxx (80% of estimated cost of tender)

Executed in any one year the following minimum quantities of work (Cement Concrete - xxxx cum, Earthwork - xxxx cum, etc) (80% of peak rate of construction)

Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year

Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year

Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx)

Liquid assets and /or availability of credit facilities of no less than Rs. xxxxxx Lakhs (estimated cash flow for 3 months of peak construction period)

Total value of civl engineering works executed and payments received in the last five years (year-wise)

List of existing commitments and ongoing works

List of works for which tenders already submitted

Banker Details for reference

Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded

Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years

Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded

List of Financial Resources with Certificates

Past Experience

3.To qualify for award of this contract, Each tenderer in his name should have in the last five year i.e, 2021-22 to 2025-26 Satisfactorily completed, as a prime contractor, for at least one similar work of value not less than Rs. 39.96 Lakhs attach certificate by not below rank of Executive Engineer with Indent No. from eProcurement Portal

Work Done Certificate

4.To qualify for award of this contract, Each tenderer in his name should have in the last five year i.e, 2021-22 to 2025-26 Satisfactorily executed quantities of works in any one year for continues period of 12 months 1.Earthwork Excavation / Embankment 38.95 Cum 2.TMT Steel 3.52 M.T. 3.BBM 46.37 Cum 4.Plastering 698.66 Sqm 5.Flooring 169.24 Sqm

Satisfactory Performance Certificate

5.Line of Credit Rs. 23.98 Lakhs should be enclosed in prescribed format (unconditional)

Line of Credit

Capabilities of Vendor

1.The Tenderer shall have valid class III and above KPWD Licence

PWD Registration Certificate (Class I/II/III/IV)

6.Bid Capacity on Letter of the contractor

Others -- 6.Bid Capacity on Letter of the contractor

Financial Status

2.To qualify for award of this contract, Each tenderer in its name should have in the last five year i.e, 2021-22 to 2025-26 Achieved in at least Two financial years an average annual financial turnover not less than in all classes of civil engineering construction works only of Rs.79.92 Lakhs. Attach certificated from C.A. on Letter Head. Two times amount put to tender. with UDIN No. otherwise bid will be directly disqualified

Audited CA Certificate of Annual Turnover

Others

The tenderer or his identified sub-contractor should posses Authorized Dealer / Manufacturer / Supplier to supply the said goods items in the tender and satisfying the conditions as per bid document for Conditions refer bid document (21846 Goods Bid Document)

Others -- The tenderer or his identified sub contractor should posses Authorized Dealer, Manufacturer, Supplier,

Fee & Financial Details

Tender Fee Amount

₹2,000

EMD Fee Amount

₹1.6 L

Important Dates

Last Activity

25 Jun 2026

Published

25 Jun 2026

Bid Opening

4 Jul 2026

Download Ends

3 Jul 2026

BOQ Preview

•

Civil work Second floor

•

Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

•

Providing Brick work with common burnt clay machine moulded perforated bricks of class designation 5.0 conforming to IS: 2222 in superstructure above plinth level in cement mortar 1:6 (1 cement : 6 co...

•

Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:4 (1 cement :4 coarse sand) inc...

•

Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, in...

•

Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removing s...

•

Providing 15 mm cement plaster with cement mortar 1:4 (1 cement: 4coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including rounding off corner...

•

Providing Neat cement punning to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing comple...

•

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...

•

Providing and laying vitrified floor tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, lai...

•

Providing and laying Vitrified tiles in Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding for Bathrooms:...

•

Providing and Applying CFTRI approved two component flexible polymer modified acrylic cementitious waterproofing coating with a mix ratio of (1 Liquid: 2 Powder), to the RCC surface like bathroom, toi...

•

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades,...

•

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle gre...

•

Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required...

•

Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint ...

•

Providing Mathi/Nandi wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete...

•

Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size grani...

•

Providing and fixing in position fully panelled Mathi/Nandi wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per dr...

•

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspensi...

•

Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprisi...

•

Providing and fixing oxidised M.S. double acting spring hinges with necessary screws etc. complete.with all lead, lifts, loading & unloading charges, cost and conveyance of all materials, labour, equi...

•

Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete :with all lead, lifts, loading & unloading charges, cost and conveyance of all ...

•

Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete : with all lead, lifts, loading & unloading charges, cost and conveyance of all material...

•

Providing and fixing door latch with necessary screws etc complete. Bright finished brass latchwith all lead, lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipmen...

•

Hold Fasts to Door frame with all lead, lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments incidental Charges etc., complete and as per specification and dire...

•

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel...

•

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate sections and other sections of approved make conforming ...

•

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of...

•

Galvanised wire mesh of average width of aperture 1.4 mm and nominal dia of wire 0.63 mmwith all lead, lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments inci...

•

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @ 0.80 ltr/10 m² of approved brand and manufacture i...

•

Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, di...

•

Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @0.75 ltr/10 m² of approved brand and manufacture to give...

•

Electrical work Second floor

•

Concealed Conduit System Supplying heavy gauge PVC conduit pipe ……mm dia .......mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes, adhesive paste etc., and running ...

•

Supplying heavy gauge PVC Conduit Pipe ….dia .......mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and ...

•

Supplying and fixing PVC/metal conduit Deep junction box with all lead, lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments ncidental Charges etc., complete an...

•

Supplying And Fixing Metal Fan Box with Round Hook. with all lead, lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments ncidental Charges etc., complete and as ...

•

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall ...

•

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate withrequired nos. of machine screws, bolts nuts etc., complete onthe existing met...

•

Point wiring using Copper wire with switch Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi stra...

•

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

•