SMART PERODICAL SERVICES IN MD ACCN UNDER AGE B/R-II OF GE (N) MAMUN

Complete removal of existing treatment on wall/ roof projections including facia, cornices etc by scrapping with mechanical sander (having mechanical vaccum mechanism with internal dust extraction system for clean environment certified by paint manufacturer) having RPM not less than 1500, sanding pad of 80 grit having dia of 7" /9" to make surface free from dust, loose paint etc complete all as specified and directed. Note: The work shall be got done through skilled workmen with proper masking on face to avoid enhaling of dust during execution of work.

M&L for water proof cement based putty @ 1 kg (undiluted) per Sqm of average thickness 1mm over the plastered/ old prepared surface of wall, sanding of putty surface with mechanical wall sander (having mechanical vaccum mechanism with internal dust extraction system for clean environment certified by paint manufacturer) having RPM not less than 1500, sanding pad of 240 grit or above to make the surface smooth, clean, free from dust etc using following steps complete all as specified and directed:- Step 1 :- Mix the putty powder by adding water as per manufacturer's instruction, mix it with putty mixer with the mixing capacity of min 2.5 kg putty per minute. Step 2 :- Apply the first coat of the prepared mixer with the help of fully automatic airless spray machine of putty application finishing the surface even and smooth in level without any undulations. Step 3 :- Allow 6-8 hrs time to dry the putty surface. Note: The work shall be got done through skilled workmen with proper masking on face to avoid enhaling of dust during execution of work.

M&L for one coat of acrylic water based exterior grade primer @ 0.9 litre (undiluted)/ 10sqm diluted with water in 1:1 ratio, applied with fully automatic airless spray machine and allow 6-8 hours to dry the surface for painting of subsequent coats complete all as specified and directed.

M&L for water based premium acrylic smooth exterior emulsion of approved colour with silicon additive excellent dirt pickup resistance with low VOC less than 50, antifungal / anti algai properties in two coats @ 1.79 litre (undiluted) / 10 Sqm diluted with water as per manufacturer's instruction applied over primed surface with fully automatic airless spray machine of paint application with a flow speed of minimum 1 litre per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface in between 1st and subsequent coats of paint complete all as specified and directed.

M&L for cement plastering 15mm thick in in cemet mortar 1:4 including mixing of liquid water proofing compound for finishing 5mm layer as per manufacturer's instructions on brick work or concrete surfaces or in chajjas/parapet walls etc finished even and smooth without using extra cement incl taking down of existing plaster of any description complete all as specified and as directed by Engineer-in-Charge.

M&L for preparation of new plastered surface of external wall and chajjas, making surface smooth using sand paper, priming the surface with alkali resistance primer paint for external surface, applying two coats of cement base paint including curing complete all as specified & directed.

M & L for cleaning, breaking, loose concrete, changing of corressive reinforcement and filling plain cement concrete 1:1 1/2:3 type B-0 using 12.5mm graded aggregate at places like chajja ,sunshades ,roof projection ,fascia ,etc as per direction by E-in-Charge (the cost of scafoldings, formworks deemed to be included in the item) Note :- Reinforcement shall be measured and paid seperately.

M&L for rendering or plastering work 10mm thick in CM 1:3 in fascia / edging / ceiling of Chajjas,roof ceilings, roof projections etc, including taking out peeled off plaster / concrete if required and making the line in true shape and finishing the surface without using extra cement complete all as specified and directed.

Preparation of new plastered or unplastered surfaces of ceiling and applying three coats of white wash,complete all as specified and directed.

M & L for preparing old painted steel and iron surfaces of any description, not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed by Engr-in-Charg Note :- (The cost for steel tubular double scaffolding necessary for execution of work and protective measures for height more than height of double/triple storey building as directed by Engr-in-charge shall be included in the quoted rate against the respective item and nothing shall be admisible for this.)