Periodical services externally and minor rep wks to certain bldgs of Zone B and Rep replacement of external face lifting saucer drainage connected line certain BR wks and other allied wks at Zone A MAP Qtrs and NOFRA II under AGE BR II area in GE Gmk

Amount

Taking down cement plaster on walls/ceiling of any description including racking out joints hacking for key, scrubbing down with water etc. and removing rubbish complete all as specified and directed.

M&L for rendering 15 mm thick on other than fair faces of brick work or concrete surfaces in cement mortar 1:4 mixed with liquid WPC @ 200 ml per bag of cement finished even and smooth without using extra cement complete all as specified and directed. Note:- WPC shall be measured and paid seperately

Supply only liquid water proofing compound

M&L for rendering 10 mm thick on brick work or concrete surfaces in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and directed.

M&L for applying one coat of alkali resistant primer on plastered surfaces over 3mm thick Birla white wall care putty and applying two coat of oil bound distemper including preparation of new surfaces complete all as specified and directed.

M&L 5 mm thick rendering in cement mortar 1:3 on ceiling or concrete surface finished even and smooth without using extra cement complete all as specified and directed.

M&L for applying three coats of white wash on ceiling including preparation of new surface complete all as specified and directed.

M&L for preperation of new surface wall/ceilling etc. applying a coat of primer and applying two coats of acrylic emulsion exterior paint (advanced anti fungal paint) complete all as manufacturers instructions and as directed.

M&L for applying one coats of exterior emulsion paint (Apex or weather coat), white or tinted on old surfaces of walls including prepration of surfaces include washing floors, removing all spots, cleaning glass, joinery, electrical fittings, wiring etc. complete all as directed

M&L for preparation of old decorated plastered surfaces of walls including cornices, and applying one coat of white wash on wall, facia, cornices etc. complete all as specified and directed.

All as per serial item No. 10 above on ceilings.

M&L for preparation of old decorated plastered surfaces of wall and applying one coat of oil bound distemper complete all as specified and directed.

M&L for preparation of old painted steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed

M&L for preparation of old decorated plastered surfaces of walls including cornices, and applying two coats of cement base paint on wall, facia, cornices etc. complete all as specified and directed.

M&L for preparation of old painted wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for painting black colour circular base n. exc. 40 cm dia for writing building number with one coat of synthetic enamel paint complete all as specified and directed.

M&L for writing building No. or figure (Block, Roman, Italic or Indian) with two coats of synthetic enamel paintheight not exc. 30 cm and width n. exc. 2 cm over black base complete all as specified and directed.

M&L for preparation of old painted floor surfaces of any description over 10 cm width or girth by filling of cracks/holes with crack seal and applying one coat of floor paint Indigo or equivalent with spray machine complete all as specified and directed.

Dismantling posts or struts (wood, RCC or steel) embedded in cement concrete, brick work, masonary etc. any section including taking out embedded portion and making good disturbed ground with earth as directed.

M&L for mild steel work as in posts and struts in fencing or gates, flat iron fillets, angle iron, swan neck including cutting tops to shape, drilling holes, notching for wire etc. conforming to Fe Fe-290 Gde E-165 complete all as specified and directed.

M&L Mild steel bars 10mm dia and over as in stiffner to chain link fencing cut to length, bent to shape required including cranking, bending etc. conforming to Fe-410-W(Gde- E-250) complete all as specified and directed.

Dismantling fencing wire mesh of any type complete all as specified and directed.

S&F PVC coated chain link fencing MS galvanised, min size 75 x 75 mm mess or cases with 3.5 mm dia mild steel galvanised wire lapped straightning and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

M&L for preparation of new or previously untreated steel surfaces exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and directed.

M&L for plain cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in saucer drain, bed blocks coping and the like slightly rounded or chamfered angles, depth of saucer drain upto 45 cm, thickness minimum 50 mm and width of drain min 25-30 cm all as required at site to ease flow of rain water and flow of water from damping ground area to the nearest area including necessary earthwork, form work and demolition of old concrete surface/ road surface complete all as specified and directed.

S&F rolled mild steel in framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc., complete, drilled for fixing of steel sheeting or other covering doors, etc., to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing conforming to Fe- 290.Gde-E-165 complete all as specified and directed.

Dismantling boarding, any description, fixed in any position with nails or with screws complete all as specified and directed.

S&F 18 mm thick celuka PVC sheet minimum 600 KLgbm density grade-I quality of both side plain white colour regidiam glossy finish fixed with screws, solvent cement/adhesive as per manufacturer instructions to make kitchen cabinet sides, top and bottom inside the cabinet including drawer channels two No. in each drawer, magnetic ball catcher and all other fittings complete all as specified and directed. Note:- (i) Quoted rates shall deem to include fixing of cabinet on wall with appropriate rawl plug/dash through fastner type). (ii) Fabrication and installation of cabinet to be carried out by authorized vender of manufacturer only.

S&F 12 mm thick celuka PVC sheet minimum 600 KLgbm density grade-I quality of both side plain white colour regidiam glossy finish fixed with screws, solvent cement/adhesive as per manufacturer instructions to make kitchen cabinet shutters, sides, top and bottom inside the cabinet including drawer channels two No. in each drawer, magnetic ball catcher and all other fittings complete all as specified and directed. Note:- (i) Quoted rates shall deem to include fixing of cabinet on wall with appropriate rawl plug/dash through fastner type). (ii) Fabrication and installation of cabinet to be carried out by authorized vender of manufacturer only.

S&F continuous (piano) hinges, brass, bright finish or electrogalvanised width of flaps (when opened) 40 mm complete as specified a

S&F Ball catches (magnetic catcher) with 8mm dia steel ball, brass body and striking plate including letting in, overall size 50 x 15 mm and fixed complete all as specified and directed.

S&F 100 mm long extruded brass, fabricated type, polished handle complete all as specified and directed.

M&L forming jambs etc to opening including cutting toothing and properly bonding into old work including facing and plastring to match existing work in cement mortar 1:6 etc. complete all as specified and directed.

Taking down, easing and adjusting and also refixing builders hardware as required including renewal of unserviceable screws, etc. and refixing in same opening, shutters of any description exc 1 sqm and n exc 2 sqm each complete all as specified and directed.

Taking down Chowkats or frames with shutter (without taking off shutters from the frame) n. exc. 1.50 sqm each complete all as specified and directed.

Taking down Chowkats or frames with shutter (without taking off shutters from the frame) exc. 1.50 sqm and n. exc. 4.00 sqm each complete all as specified and directed.

S&F Powder coated (minimum 50micron) aluminium door/ window/ ventilators shutter and frame, any type sliding or openable & other similar work etc. fabricated by using the approved standard section including necessary arrangements to receive 4 mm thick glass or wire mesh with aluminium channel beading & stainless steel screws including the cost of rubber gasket/rubber beading etc. complete including necessary handles, roller wheels, hinges etc complete all as specified and as directed. Note :- (i) Weight of aluminium section shall be measured exclusive of all fittings fixtures, hinges, handle, bolts, rubber gasket/rubber beading and locking arrangements. (ii) Glass and wire mesh will be measured and paid seperately.

S&F Deco-102, Anodised aluminium grill (anodised transparent or dyed to required shade according to IS 1868 with minimum anodic coating of grade AC 15 of approved design/ pattern with approved standard section and fixed to the existing window frame with CP brass/ stainless steel screw @ 200 mm centre to centre including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening all complete all as specified and directed.

Demolition of stone slabs and tiles of any description and thickness as in floor, apron etc. laid, bedded and pointed in any mortar complete all as specified and directed.

M&L for granite stone 20 mm thick (of any type) glazed (table rubbed and polished) fixed as in steps, jambs, pillars, window cills, cooking plateform and the like set in cement mortar 1:4 and pointed with white cement (1:2) using marble dust with admixture of pigment to match and exposed edges rounded and providing screed bed 15 mm thick in CM 1:4 complete all as specified and directed.

S&F figured glass, 4 mm thick, pin head type and fixing with wooden beads or oil putty and provsion of glazing pins/ rubber beading complete all as specified and directed.

S&F aluminium anodised wire mesh of size 1.5 mm x 3 mm mesh, 20 Gauge thick in doors/window shutters rate complete all as specified and directed.

S&F in repair aluminium anodised wire mesh of size 1.5 mm x 3 mm mesh, 20 Gauge thick in doors/window shutters rate including removal of wiremesh, aluminium grills/ aluminium window shutters wherever required and refixing them in position after fixing of wiremesh complete all as specified and directed.

Demolition of cement concrete unreinforced in ground floors and pavings n.exc. 15 cm thickness(below or above ground level) complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.

Demolition of Brick Work/ sone work / concrete block wall built in Cement Mortar including all quoins, arches, pillars, etc. of any descriptions, complete all as specified and as directed.

M&L for precast cement concrete block masonry, type C-1 (1:3:6) (20 mm graded aggregate) with solid blocks, exc 10 cm in width and setting in CM 1:4 complete all as specified and as directed.

M&L for rendering 15 mm thick on brick work or concrete surfaces in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 10 mm thick on brick work or concrete surfaces in cement mortar 1:4 finished even and smooth without using extra cement complete all as specified and directed.

M&L for 3mm thick Birla white wall care putty and applying two coat of oil bound distemper including preparation of new surfaces of wall complete all as specified and directed.

M&L for 3mm thick Birla white wall care putty and applying two coat of oil bound distemper including preparation of new surfaces of ceiling complete all as specified and directed.

M&L for complete removal of existing treatment of ceiling and applying 3mm thick Birla white wall care putty and applying two coat of oil bound distemper including preparation of new surfaces of ceiling complete all as specified and directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc. complete all as specified and directed.

M&L for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed.

STAR FABRICATION (BID ID -3111811)

Leela Enterprises (BID ID -3113451)

CVS CONSTRUCTIONS (BID ID -3112235)

M/S jvsr constructions (BID ID -3111187)

Tara Construction (BID ID -3112256)

SHIVRAJ CONSTRUCTIONS (BID ID -3113745)

SACHIN CONSTRUCTIONS (BID ID -3113221)