Construction of 1(one) New Residential Hostel under Samagra Shiksha for the Year 2024-2025 at Tipaimukh, Pherzawl District, Manipur.

Amount

SH: 100 Bedded Hostel (50 Bedded each for Boys & Girls)

Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.

All kinds of soil.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.

Supplying and filling in plinth with sandy soil under floors including, watering, ramming consolidating and dressing complete.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering -

All work up to plinth level:

1:5:10 (1 cem :5 c/sand :10 graded stone aggregate 40 mm nom size)

Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1cement: 2 coarse sand : 4 graded stone aggregate 20mm nominal size).

Providing and laying in position of specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement-All work up to plinth level:

1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size).

R.C.C. work in walls (any thickness),including attached pilasters, buttresses, plinth and string courses, fillets, columns, Pillars piers, abutment, posts and struts etc. up to floor five level excluding cost of centering, shuttering, finishing and reinforcement :

1:1.5:3 ( 1 cement : 1.5 c/sand : 3 graded stone aggregate 20mm. Nominal size).

having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering,shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size).

1:1.5:3 ( 1 cement : 1.5 c/sand : 3 graded stone aggregate 20mm. Nominal size).

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete.

Thermo-Mechanically Treated bars

Centering and shuttering including strutting, propping etc. and removal of form for:

Foundation footings, bases of columns etc. and mass concrete.

Columns, Pillars, Piers, Abutments, Posts and Struts.

Lintels, beams, plinth beams, girders, bressumers and cantilevers.

Suspended floors, roofs, landings, balconies and access platform.

Stairs, (excluding landings) except spiral-staircases.

Brick work with Ist class common burnt clay F.P.S. (non modular) bricks in foundation and plinth in:

Cement mortar 1:4 (1 cement : 4 coarse sand)

Half brick masonry with Ist class common burnt clay F.P.S. (non modular) bricks in superstructure above plinth level up to floor V level in

Cement mortar 1 : 4 (1 cement : 4 coarse sand)

Extra for half brick masonry in superstructure, above floor V level for every four floors or part thereof by mechanical means by lifting material using mobile crane.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fastener of required dia and length (hold fast lugs or dash fastener shall be paid for separately

Local best quality Uningthou

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including ISI marked M.S butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge.

Local best quality Teak wood 35 mm thick shutter

Providing wood work in frames of false ceiling, partitions etc. sawn and put up in position :

Local best quality Tolhao wood.

Providing and fixing ISI marked oxidised M.S.sliding door bolts with screws etc. complete

Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete :

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10 x 15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size)

Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete :

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.

a) Fixed to steel window by welding

Steel work welded in built up section/framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using steel etc. as required.

In grating, frames, guard bar, railing, brackets, gates and similar works.

Cement concrete flooring 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete.

40mm thick with 20mm nominal size stone aggregate.

Cement plaster skirting (up to 30 cm height) with cement mortar 1:3 (1 cement : 3coarse sand) finished with a floating coat of neat cement.

18 mm thick.

Steel work in built up tubular (round, square or rectangular tubes etc.) trusses etc., including cutting, hoisting fixing in position and applying a priming coat of approved steel primer, including welding and bolted including special shaped washers etc.

Hot finished welded type tubes

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length up to 12 metre or as desired by Engineer-in charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete up to any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required with

Precoated galvanised iron profile sheets 0.50 mm thick

Providing and fixing precoated galvanised steel sheet roofing accessories , Zinc coating 120gsm as per IS: 277 in 240mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping

Precoated galvanised iron profile sheets 0.50 mm thick

Providing and fixing insulating board ceiling of approved quality with necessary nails etc. complete (framework to be paid separately): which face insulating board

12 mm thick

12 mm cement plaster of mix:

1:4 (1 cement : 4 fine sand)

15 mm cement plaster on rough side of single or half brick wall of mix :

1:4 (1 cement: 4 coarse sand)

Providing and applying white cement based putty of average thickness 1mm,of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :

Water thinnable cement primer

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade.

Two or more coats on new work-

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade

New work (two or more coats) over and including priming coat with cement primer:-

Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @0.90 litre/10 sqm over an under coat of primer applied @0.75 litre/ 10 sqm of approved brand or manufacture

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :

W.C. pan with ISI marked white solid plastic seat and lid.

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to

White Vitreous china Orissa pattern W.C. pan of size 580 x 440 mm with integral type foot rests

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required:

White Vitreous China Angle back wash basin size 600 x 480 mm with single 15 mm C.P. brass pillar tap

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively.

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Semi rigid pipe 32 mm dia

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.

600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms.

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.

40 mm dia

Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/8 litre), including seat cover, and cistern fitting, nuts, bolts and gasket etc complete.

Providing and fixing white vitreous china squatting plate urinal with integral rim longitudinal flush pipe.

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. (Internal work-Exposed on wall)

20 mm dia

15 mm dia.

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :

15 mm dia (nominal) bore

Providing and fixing brass ferrule with C.I. mouth cover including boring and tapping the main :

25 mm dia

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. (External work)

20mm dia.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

1000 litres net capacity storage tanks

Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:-

(a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass

SH: Land Development for Hostel

Earth work in rough excavation banking excavated earth in layers not exceeding 20 cm in depth braking clods watering rolling each layer with 1/2 tonne roller or wooden or steel rammers and rolling every 3rd and top most layer with power roller of minimum 8 tonnes and dressing up in embankments for roads flood banks marginal banks and guide banks or filling up ground depressions lead up to 50m and till up to 1.5m

i) All kinds of soil

SH: Septic Tank & Soak Pit for both Boys & Girls Hostel

Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.

All kinds of soil.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering -

1:3:6 ( 1 Cement: 3 coarse sand : 6 graded stone aggregate 40 mm nominal size)

(b) 1:2:4( 1 cement : 2 coarse sand : 4 stone agtt 40mm nominal size

Brick work with Ist class common burnt clay F.P.S. (non modular) bricks in foundation and plinth in:

Cement mortar 1:4 (1 cement : 4 coarse sand)

Half brick masonry with Ist class common burnt clay F.P.S. (non modular) bricks in superstructure above plinth level up to floor V level in

Cement mortar 1 : 4 (1 cement : 4 coarse sand)

Centering and shuttering including strutting, propping etc. and removal of form for:

Suspended floors, roofs, landings, balconies and access platform.

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. Above Plinth level

Thermo-Mechanically Treated bars

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering,shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size).

Supplying and filling in plinth with sandy soil under floors including, watering, ramming consolidating and dressing complete.

15 mm cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall.

SH: Construction of 3 Classrooms

Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.

All Kinds of soil

Filling available excavated earth(excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidation each deposited layer by ramming and watering, lead up to 50m and lift up to 1.5m.

Supplying and filling in plinth with sandy soil under floors including, watering, ramming consolidating and dressing complete.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering -

All work up to plinth level:

1 :5: 10 ( 1 cement : 5 c/sand : 10 graded stone aggregate. 40mm. nominal size).

Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1cement: 2 coarse sand : 4 graded stone aggregate 20mm nominal size).

Centering and shuttering including strutting, propping etc. and removal of form for:

Foundation, footings, bases of columns etc. and mass concrete.

Columns, Pillars, Piers, Abutments, Posts and Struts.

Lintels, beams, plinth beams, girders, bressumers and cantilevers.

Providing and laying in position of specified grade of reinforced cement concrete, excluding the cost of centering,shuttering,finishing and reinforcement-All work up to plinth level:

1:1.5:3 ( 1 cement : 1.5 c/sand :3 graded stone aggregate 20mm. Nominal size).

R.C.C. work in beams suspended floors, roofs, having slope up to 15 landing, balconies,shelves,chajjas, lintels bands, plain windows sills, staircases and spiral staircases and spiral staircases up to floor five level excluding the cost of centering,shuttering, finishing and reinforcement with

1:1.5:3 ( 1 cement : 1.5 c/sand : 3 graded stone aggregate 20mm. Nominal size).

R.C.C. work in walls (any thickness),including attached pilasters ,buttresses, plinth and string courses, fillets, columns, Pillars piers, abutment, posts and struts etc. up to floor five level excluding cost of centering, shuttering, finishing and reinforcement :

1:1.5:3 ( 1 cement : 1.5 c/sand : 3 graded stone aggregate 20mm. Nominal size).

Reinforcement for R.C.C. work including straightening , cutting, bending and placing in position and binding all complete.

Thermo-mechanically treated bar.

Brick work with Ist class common burnt clay F.P.S. (non modular) bricks in foundation and plinth in: cement mortar 1:4 (1 cement :4 coarse sand

Half brick masonry with Ist class common burnt clay F.P.S. (non modular) bricks in superstructure above plinth level up to floor V level in cement mortar 1:4 (1 cement :4 coarse sand

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fastener of required dia and length (hold fast lugs or dash fastener shall be paid for separately :

Local best quality Uningthou wood

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including ISI marked M.S butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge.

Local best quality Tolhao wood 35mm thickness shutters

Steel work in built up tubular (round, square or rectangular tubes etc.) trusses etc., including cutting, hoisting fixing in position and applying a priming coat of approved steel primer, including welding and bolted including special shaped washers etc. complete. Hot finished welded type tube

Steel work welded in built up section/framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using steel etc. as required.

In gratings, framed guard bars, ladders, railings, brackets and similar works.

Providing wood work in frame of false ceiling partition etc sawn & put in position

Tolhao wood

Providing and fixing ISI marked oxidised M.S.sliding door bolts with screws etc. complete

Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete :

Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete :

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10 x 15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size)

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.

Fixed to openings /wooden frames with rawl plugs screws etc.

Cement concrete flooring 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20mm nominal size stone aggregate

Cement plaster skirting (up to 30 cm height) with cement mortar 1:3 (1 cement : 3coarse sand) finished with a floating coat of neat cement.(18mm thick)

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length up to 12 metre or as desired by Engineer-in charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete up to any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required with c) Precoated galvanised iron profile sheets 0.5mm thick

Providing and fixing precoated galvanised steel sheet roofing accessories , Zinc coating 120gsm as per IS: 277 in 240mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws or with polymer coated J or L hooks, bolts and nuts and or G.I. seam bolts and nuts, G.I. plain and bitumen washers complete :

Precoated galvanised iron profile sheets 0.50 mm thick

Providing and fixing insulating board ceiling of approved quality with necessary nails etc. complete (framework to be paid separately): i) White face insulating board (12mm thick)

12mm Cement Plaster of mix 1 :4 ( 1 Cem : 4 fine sand)

15 mm cement plaster on rough side of single or half brick wall of mix :1:4(1 cement: 4 coarse sand)

Providing and applying white cement based putty of average thickness 1mm,of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :

Water thinnable cement primer

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade.

Two or more coats on new work-

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade

i) New work (two or more coats) over and including priming coat with cement primer:-

Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @0.90 litre/10 sqm over an under coat of primer applied @0.75 litre/ 10 sqm of approved brand or manufacture

25 mm thick plank walling ( Tolhao local best quality) and Tolhao wood beading 62mm x12mm i/c fitting and fixing with necessary screw and nails complete( frame work to be paid separately)

Providing and fixing 20 mm plank as eave board with

Tolhao/uchan

SH: Toilet for Boys & Girls for the Construction of Classrooms

Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.

All kinds of soil.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering -

a) 1:3:6 ( 1 Cement: 3 coarse sand : 6 graded stone aggregate 40 mm nominal size)

b) 1:2:4( 1 cement : 2 coarse sand : 4 stone agtt 40mm nominal size

Brick work with Ist class common burnt clay F.P.S. (non modular) bricks in foundation and plinth in:

Cement mortar 1:4 (1 cement : 4 coarse sand)

Half brick masonry with Ist class common burnt clay F.P.S. (non modular) bricks in superstructure above plinth level up to floor V level in

Cement mortar 1 : 4 (1 cement : 4 coarse sand)

Centering and shuttering including strutting, propping etc. and removal of form for:

Suspended floors, roofs, landings, balconies and access platform.

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete.

Thermo-Mechanically Treated bars

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering,shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size).

Supplying and filling in plinth with sandy soil under floors including, watering, ramming consolidating and dressing complete.

15 mm cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall.

SH: Septic Tank & Soak Pit for the Construction of Classroom

Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.

All Kinds of soil

Filling available excavated earth(excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidation each deposited layer by ramming and watering, lead up to 50m and lift up to 1.5m.

Providing and laying in position cement concrete of specified grade excluding the cost of cantering and shuttering -

a) 1:4:8 ( 1 Cement: 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

b) 1:2:4( 1 cement : 1 coarse sand : 2 stone agtt 20 mm nominal size

Brick work with Ist class common burnt clay F.P.S. (non modular) bricks in foundation and plinth in: cement mortar 1:4 (1 cement :4 coarse sand

Half brick masonry with Ist class common burnt clay F.P.S. (non modular) bricks in superstructure above plinth level up to floor V level in cement mortar 1:4 (1 cement :4 coarse sand

Centering and shuttering including strutting, propping etc. and removal of form for:

Suspended floors, roofs, landings, balconies and access platform.

Steel Reinforcement for R.C.C. work including straightening , cutting, bending and placing in position and binding all complete.

Thermo-mechanically treated bar.

R.C.C. work in walls (any thickness),including attached pilasters ,buttresses, plinth and string courses, fillets, columns, Pillars piers, abbutment, posts and struts etc. up to floor five level excluding cost of centering, shuttering, finishing and reinforcement :

1:1.5:3 ( 1 cement : 1 .5c/sand : 3 graded stone aggregate 20mm. Nominal size).

15 mm cement plaster on rough side of single or half brick wall of mix :1:4(1 cement: 4 coarse sand)

R.C.C. work in walls (any thickness),including attached pilasters ,buttresses, plinth and string courses, fillets, columns, Pillars piers, abbutment, posts and struts etc. up to floor five level excluding cost of centering, shuttering, finishing and reinforcement :

32mm dia

40mm dia

SH: Providing IEI for Hostel

Wiring for light point/Fan point/Exhaust Fan point/Call bell point with 1.5 mm 2 PVC insulated copper conductor single core cable in PVC insulated casing copper with piano type switch phenol laminated sheet suitable size MS-box and earthing the point with 1.5 mm2 PVC insulated copper conductor single core cable etc. as reqd.

1. Group - A

2. Group - B

3. Group - C

Wiring for light point/power plug with 2 x 4 mm2 PVC insulated copper conductor single core cable in PVC casing and capping along with 1 no. 4 mm2 PVC insulated copper conductor single core cable for loop earthing etc. as reqd. 14,728.00

Wiring for circuit/sub-main wiring along with earth wire with (the following sizes of) PVC insulated copper conductor single core cable in PVC casing and capping etc. as reqd.

2 x 1.5 mm2 + 1 x 1.5 mm2 earth wire

2 x 2.5 mm2 + 1 x 2.5 mm2 earth wire

2 x 4 mm2 + 1 x 4 mm2 earth wire

Supply and fixing (following piano type switch / socket) on the existing switch box/ cover i/c connection etc as req.

3 pin 5/6 amps socket outlet

5/6 amps switch

S/F metal box of 180mm x 100mm x 60 mm (N/S) on surface or in recessed with suitable size of phenolic laminated sheet cover in front i/c P/F 6 Pin 5/6 and 15/16 amp socket outlet and 15/16 amp piano switch, connection painting etc as reqd.

S/F 3 pin 5 amp ceiling rose on the existing junction box / wooden block i/c connection etc. as reqd

S/F brass batten/angle holder i/c connection etc. as reqd.

S/F 48” sweep (1200 mm) A.C. ceiling fan complete with down rod, canopy, 3 (three) blades but without regular etc as reqd. (Make Bajaj / Usha or similar)

S/F stepped type electronic fan regulator on the existing modular plate switch box i/c connection but excluding modular plate etc. as reqd

S/F (following way) single/double pole and neutral, sheet steel MCCB distribution board, 240 V on surface/recessed complete with tinned copper but bas neutral bus bar, earth bar, din bar, detachable gland plate interconnection, phosphatised and powder painted including earthing etc. as reqd. (but without MCB/RCCB/Isolator).

8 Way single door

Supplying and fixing 5 amp to 32 amp rating 230 V B series MCB for lighting and other load for (following poles) in the existing MCB DB complete with connection testing and commissioning etc. as reqd.

Single pole and neutral

S/F (following rating) double pole 240 V isolator in the existing MCB DB complete with connection, testing and commissioning as reqd.

10 sq.mm ISI marked, FR PVC insulated, single core copper conductor cable

S/F of metal Boxes with phenolic laminated sheet cover in front

250 mm x 300mm x 100 mm deep

180mm x 100mm x60mm deep

Earthing with G.I. earth pipe 4.5 m long 40 mm dia i/c accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. (but without charcoal or coke and salt) as reqd.

Extra for using salt and charcoal for pipe earth electrode as reqd.

P/L earth connection from earth electrode with 4 mm dia copper wire in 15 mm dia G.I. pipe as reqd.

100 amp/63 amp 500 V porcelain fuse unit (kit-kat).

S/F bus bar chamber with 4 strips copper bus bar of length 300mm suitable for 63 amp capacity complete with all accessories i/c connection earthing the body etc. as reqd

P/F 125 amp.TPN stand ground on load change over switch (Compact design) 415/500 V including connection etc as reqd.

S/F 18 W LED tube Lamp Hevells

S/F 15 W LED Bulb Hevells

SH: Providing IEI for Classroom & Toilet

Wiring for light point/Fan point/Exhaust Fan point/Call bell point with 1.5 mm 2 PVC insulated copper conductor single core cable in PVC insulated casing copper with piano type switch phenolic laminated sheet suitable size MS-box and earthing the point with 1.5 mm2 PVC insulated copper conductor single core cable etc. as reqd.

1. Group - A

2. Group - B

3. Group - C

Wiring for light point/power plug with 2 x 4 mm2 PVC insulated copper conductor single core cable in PVC casing and capping along with 1 no. 4 mm2 PVC insulated copper conductor single core cable for loop earthing etc. as reqd. 14,728.00

Wiring for circuit/sub-main wiring along with earth wire with (the following sizes of) PVC insulated copper conductor single core cable in PVC casing and capping etc. as reqd.

2 x 1.5 mm2 + 1 x 1.5 mm2 earth wire

2 x 4 mm2 + 1 x 4 mm2 earth wire

2 x 6 mm2 + 1x 6 mm2 earth wire

Supply and fixing (following piano type switch / socket) on the existing switch box/ cover i/c connection etc as req..

3 pin 5/6 amps socket outlet

5/6 amps switch

6 pin 15/16 amps socket outlet

15/16 amps switch

S/F brass batten/angle holder i/c connection etc. as reqd.

S/F 3 pin 5 amp ceiling rose on the existing junction box / wooden block i/c connection etc. as reqd

S/F 48” sweep (1200 mm) A.C. ceiling fan complete with down rod, canopy, 3 (three) blades but without regular etc as reqd. (Make Bajaj / Usha or similar)

S/F stepped type electronic fan regulator on the existing modular plate switch box i/c connection but excluding modular plate etc. as reqd

S/F 380mm Sweep exhaust fan complete with all accessories i/c connection etc as reqd

S/F (following way) single/double pole and neutral, sheet steel MCCB distribution board, 240 V on surface/recessed complete with tinned copper but bas neutral bus bar, earth bar, din bar, detachable gland plate interconnection, phosphatised and powder painted including earthing etc. as reqd. (but without MCB/RCCB/Isolator).

8 Way double door

4 Way double door

Supplying and fixing 5 amp to 32 amp rating 230 V B series MCB for lighting and other load for (following poles) in the existing MCB DB complete with connection testing and commissioning etc. as reqd.

Single pole and neutral

S/F (following rating) double pole 240 V isolator in the existing MCB DB complete with connection, testing and commissioning as reqd.

10 sq.mm ISI marked, FR PVC insulated, single core copper conductor cable

S/F of metal Boxes with phenolic laminated sheet cover in front

250 mm x 300mm x 100 mm deep

200 mm x 150 mm x 75 mm deep

Earthing with G.I. earth pipe 4.5 m long 40 mm dia i/c accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. (but without charcoal or coke and salt) as reqd.

Extra for using salt and charcoal for pipe earth electrode as reqd.

P/L earth connection from earth electrode with 4 mm dia copper wire in 15 mm dia G.I. pipe as reqd.

100 amp 500 V porcelain fuse unit (kit-kat).

S/F 15 W LED Bulb Polycab

ASEM NINGTHEMJAO SINGH (BID ID -8740)

Gaikhonlung Panmei (BID ID -8742)

Lienmang Gangte (BID ID -8744)