Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹13.5 LAccepted-AOC | 1 | Accepted-AOC Being lowest | |
| 2 | 2₹14.2 L+₹48,672.50 (3.54%)Rejected-Finance A 1 BLOCK 2 HATHITHAN HATHITHAN VILLAGE TOWN JALALNAGAR CITY SHAHJAHANPUR SHAHJAHANPUR UTTAR PRADESH 242001 INDIA | SHAHJAHANPUR | UTTAR PRADESH | 242001 | 2 | Rejected-Finance Not being lowest | |
| 3 | 3₹15.2 L+₹1.4 L (10.4%)Rejected-Finance | 3 | Rejected-Finance Not being lowest | |
| 4 | 4₹16.4 L+₹2.6 L (19.3%)Rejected-Finance | 4 | Rejected-Finance Not being lowest | |
| 5 | 5₹16.8 L+₹3.0 L (22.2%)Rejected-Finance | 5 | Rejected-Finance Not being lowest |
Tender Value
₹25 L
EMD Value
₹50,000
Closing Date
30 Sept 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
HQ CWE Agra
112, Taj Road, Agra Cantt
WELCOME MAINT OF OFFICERS MD ACCN UNDER AGE (I) FATEHGARH
2024_MES_666014_2
86192/E8
Open Tender
Civil Works
Item Rate
Fatehgarh
MES contractors enlisted for Class E and above and category a(i) for unenlisted contractors meeting the enlistment criteria corresponding to value class and category of work
8 documents required · 8 mandatory
₹500
AGE (I) Fatehgarh
₹50,000
26 Nov 2024
9 Sept 2024
7 Oct 2024
9 Sept 2024
30 Sept 2024
16 Sept 2024
9 Sept 2024 - 12 Sept 2024
Amount
Demolition of brick work or stone /boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.
M & L Brick work using old size sub class B bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1 : 6 complete all as soecified and directed.
M & L Brick work using old size bricks (Except brick) straight or curved on plan exc 6 m mean radius built in cement mortar 1 : 6 complete all as specified and directed.
Dismantling of floor hearth or wall tiling any type including cement mortar bedding complete all as specified and directed.
M & L for vitrified ceramic light shade tiles 8-10mm thick (square or rectangular) polished area of each tile not exc.0 .36 sqm in floor and shall be jointed in neat cement slurry and pointed in paste pigmented to tile shade complete laid over screed bed or bedding layer of mortar CM (1:6) , 15mm thick complete all as specified and directed.
M&L for non skid ceramic any coloured/printed tiles 7 to 8 mm thick (square/rectangular ) area of each tile exc 0.06 Sqm but not exc 0.11 Sqm as in floor of shade & designed as approved by AGE (I),set and jointed in neat cement slurry and pointed with white cement with colour pigment to match the colour of tiles,over15 mm thick screed bed in cement mortar (1:4) in floors, incl dismantling / demolition and rubbish off the primises etc complete all as specified and directed.
M & L for Glazed ceramic tiles in vertical surface 450 x 300x 7mm thick coloured tiles, set and jointed in neat cement slurry and pointed in white or colour cement to match, over and inlcuding10 mm thick rendering on fair faces of concrete surface of verticle in CM (1:3) finished even and smooth without using extra cement complete, shade & design as approved by EIC/AGE (I), incl rubbish off the primises etc all as specified and directed.
M & L 20 mm thick Granite (of any type) work (table rubbed and polished) in steps , jambs, pillars, window cills, cooking plateforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.
Taking down cement plaster of any description built in cement mortar of any description complete all as specified and directed.
M&L 15mm thick cement plastering in cm 1:6 on brick or concrete surfaces fair finished the surfaces even and smooth without using extra cement complete all as specified and directed
M & L for 15mm thick rendering or brick work or concrete surface in cm 1:4 finished even & smooth w/o using extra cement all as specified and directed.
M&L 5mm thick cement plastering in cm 1:3 on on ceiling surfaces even and smooth without using extra cement complete all as specified and directed.
Taking down chowkats with shutter n.exc 1.50 Sqm each (without taking off shutter for the chowkats ) including making good of distrubed surfaces to match with the existing surfaces as before complete all as specified and directed.
All as per item ser No-13 above but exc 1.50sqm but n.exc 4Sqm
Taking down shutter of any description exc 1.00 Sqm but n.exc 2.00 Sqm complete all as specified and directed.
S&F for Steel ventilators , fixed type, complete with glazing bars / gauzed portion dovetailed or welded etc complete all as specified and directed.
S&F for Steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, complete with glazing bars , dovetailed or welded etc complete all as specified and directed.
S&F for Steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, complete with out glazing bars , dovetailed or welded etc complete all as specified and directed.
S & F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed
S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete conforming to Fe-410-W (Gde E250) Quality 'A' etc complete all as specified and directed.
M & L for PCC 1 : 3 : 6 type C1 using 20 mm graded stone aggregate Providing, cement concrete in roof kerbs or mud stops, rounded or as in fixing of hold fast incl necessary form work etc complete all as specifed and directed.
S&F 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.
S&F 30mm thick Factory made glazed & skelton shutter of 2nd class H.W open rebated and prepare to receive the glass, gauge etc (without sash bar) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass gauge etc size of members of shutters as specified in SSR Part-I section 8 clause 8.24 (a) supplied and fitted to chowkats complete all as specified and directed.
Dismantling boarding as in kitchen cupboard, drawers, cupboard incl chowkhats etc. fixed with screw in any position complete all as specified and directed.
S & F factory made WPC single extruded 100% lead free ROHS certified board of 6mm thick pre laminated moulded wall lining for kitchen cabinet, cupboard. The laminated shutter should be 10 mm deep mould on the pre laminated side with different design and other side plain white of density not less than 600 kg / cum manufactured by an ISO 9001:2015 certified company. The 6mm board should be 100% lead free, water proof, termite proof and borer proof and should have good screw holding capacity and complete all as specified and directed.
S & F factory made WPC single extruded 100% lead free ROHS certified board of 18mm thick pre laminated moulded shutter for kitchen cabinet, cupboard. The laminated shutter should be 10 mm deep mould on the pre laminated side with different design and other side plain white of density not less than 600 kg / cum manufactured by an ISO 9001:2015 certified company. The 18mm board should be 100% lead free, water proof, termite proof and borer proof and should have good screw holding capacity and complete all as specified and directed.
S&F for soft closing cold rolled steel drawer channel with telescopic ball bearing,latch,etc. complete all as specified and directed.
S & F Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or stainless wire staples, wodden beads to steel windows/wodden doors etc complete all as specified and directed.
S & F in repair stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or stainless wire staples, fixed in aluminium windows/vent etc complete all as specified and directed.
S&F Aluminium anodised barrel tower bolts of extruded section of 200mm size etc complete all as specified and directed.
S&F 125mm hasp and staple, aluminium anodised, incl mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.
S&F Aluminium handles, cast type anodised of size 150mm etc complete all as specified and directed.
S&F 300 mm long Aluminium alloy. anodised, sliding door bolt with hasp, staple ( bolt type) and fixing clips of sheet , cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.
S&F stainles steel butt hinges of size 100mm medium weight complete all as specified and directed.
S & F in repairs stainless steel decorative curtain rod of 25 mm bore with 1mm thick including brakets 02 nos finalie 02 nos) etc complete all as specified and as directed.
Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frames glazed with putty of fixed with beads complete all as specified and directed.
S & F sheet glass ordinary quality 3 mm thick and glazing with oil putty or fixed with bead / glazing pins in squares n.exc. .5 sqm each pane all corner of glass to be fixed with silicon complete all as specified and directed.
S & F continous (piano) hinges, mild steel, bright finish or eletro galvanised width of flap (when opened) 30 mm etc complete all as specified and as directed.
S & F in repair mild steel helical door spring 300 mm long ordinary rat tail type incl roller and roller plate complete fixed with screws to wooden frames or with welding to steel frames complete all as specified and directed.
M & L for Preparation of new steel and iron surfaces of any description, over 10 cm in width or girth , not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide primer etc complete all as specified and as directed.
M & L preparing new wooden surface of any description, not other wise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer etc complete all as specified and as directed.
S&F in repair door seal with brush complete all as specified as directed
S & F in repair stainless steel sink with drainage board 1.00mm thick for kitchen with plug / waste pipe washers including cantiliver bracket or, connecting unions etc over all size 915 x 460 mm with bowel size 410 mm x 330 mm x 160 mm complete all as specified and as directed.
S&F in repair utencil plate rack 1 mm th of size 60 cm x 60 cm x 25 cm, of pattern as approved by engineer-in-charge, fixed to wall by means of four nos rawal plugs, complete in all respect complete all as specified and directed.
S&F in repairs PVC acrylic toilet cabinet with shelves 440mmx325mmx120mm size with shutter and mirror complete all as specified and directed.
S&F in repair Grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40gms) etc complete all as specified and directed.
S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.
Dismantling of water tanks capacity exc 250 ltrs and n.exc 500 ltrs and removing to store complete all as specified and directed.
S & F 500 litre rotational moulded tripple layer polyethlene water storage tanks white colour (cylindrical vertical with closed top) and suitable size of MS tasla with locking system hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed.
Dismantling of water tanks capacity exc 500 ltrs and n.exc 1000 ltrs and removing to store complete all as specified and directed.
S & F 1000 litre rotational moulded tripple layer polyethlene water storage tanks white colour (cylindrical vertical with closed top) and suitable size of MS tasla with locking system hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed.
S & F in repair Vitreous China Wash hand basin white flat back of size 550 x 400 mm including brackets, waste coupling 32mm dia and waste pipe complete all as specified and directed.
S & F in repair PVC low level flushing cistern 10 litres, valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, flushing pipe complete all as specified and directed.
S&F in repair vitreous china wash down water closet pan (padestal pattern) white including fixing bolts and fixtures incl white seat cover etc complete all as specified and directed.
S&F in repair vitreous china wash down water closet pan two piece wall hung type complete with cover white including fixing bolts and fixtures etc complete all as specified and directed.
S&F Vireous china water closet squatting pan “Orrisa Pattern” white of size 580x440mm with internal foot rest with `P’ or `S’ trap for 100mm pipe (excluding flush pipe and flushing cistern) all as spd but fixed in repair. complete all as specified and directed.
S&F in repairs stop valve/angle valve, bore of dia 15mm of Chromium plated fancy type cast copper alloy with crutch or butter fly handle screwed down screwed for iron pipe and fixed etc complete all as specified and directed.
S&F in repairs shower concealed stop valve, bore of dia 15mm of Chromium plated fancy type cast copper alloy with long shank and capstan head for (Bath shower) screwed for iron pipe and fixed including making good exisiting surfaces complete all as specified and directed.
S&F in repair 15mm bore Chromium plated Bib taps fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.
S&F in repairs PVC connection 15mm size with PTMT nuts of length 450mm etc complete all as specified and directed.
S & F in repairs brass chromium plated shower rose 125mm size with shower arm complete all as specified an directed.
Demolition and breaking up drain pipes 100 mm dia(Salt glazed ware, PVC pipe AC or reinforced concrete) set in cement mortar incl cleaning sludge/wastage etc at shaft portion of bldg where new pipes to be fixed complete all as specified and directed.
S & F PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.
S&F PVC (SWR) bends of radius 110 mm complete all as specified and directed.
Disconnecting existing tanks exc. 500 but n. exc. 1000 Ltr Capacity, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position including taking down ball valves 15mm/20mm and refixing and Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc.complete all as specified and directed.
Taking up or down steel tubing and connections, incl cleaning for refixing or removal to store etc complete all as specified and directed.
(a) 15 mm dia
(b) 20 mm dia
M&L for laying GI medium grade tubing incl all fittings laid in floors /fixed on walls complete all as directed for the following bore of pipes etc complete all as specified and directed.
(a) 15 mm dia
(b) 20 mm dia
S&F in repairs sink mixer with swan neck 15mm bore brass chromium plate foam flow for mixing hot and cold water fancy type complete all as specified and directed.
S&F in repair wall mixer with L-band(provision of overhead shower) 15mm bore brass chromium plate foam flow for mixing hot and cold water fancy type complete all as specified and directed.
S&F in repair basin mixer 15mm bore brass chromium plate foam flow for mixing hot and cold water fancy type complete all as specified and directed.
S&F in repair 15mm Pillar taps, fancy type cast copper alloy, with capstan heads,chromium plated,screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwedshanks and fly-nuts,screwed for iron pipe and fixed complete all as specified and directed.
Supply & Fixing in repair 32 mm dia PVC Waste pipe suitable for Wash hand basin/kitchen sink all as specified and directed by Engineer-in-Charge.
S & F in repair corner glass 300 mm with brass brackets complete all as specified and directed.
S&F in repairs Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed
M&L for Preparation of old surfaces of Wall and applying One coat of white wash over old decorated surface of walls all as specified and directed.
All as Per Item No.76 above here in before but on Ceilling all as specified and directed.
M&L for rubbing down and stopping of old distempered surfaces including preparation and applying one coat of oil bound distemper on walls all as specified and directed.
M&L for rubbing down and stopping of old distempered surfaces including preparation and applying two coat of oil bound distemper on walls all as specified and directed.
M & L for preparation of old external surfaces of walls, facia, cornics etc and applying one coat of Anti fungal weather coat Exterior paint (ACE) on walls as per manufactures instruction complete all as specified and directed.
M&L for Preparation of old painted wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed..
M&L for Preparation of old painted steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint all as specified and directed.
M&L for complete removal of existing treatment on old plasterd surface, preparation of old surfaces and applying Two coats of Oil Bound Distemper over a coat of alkali resistant primer over a coat of 1mm thick cement base wall care putty complete all as specified and directed.
M&L for Preparation of Newly Plastered surfaces of Wall and applying Two coats of Oil Bound Distemper over a coat of alkali resistant primer complete all as specified and directed.
M&L Preparation of Newly Plastered surfaces of Ceiling and applying Three coats of White Washing all as specified and directed.
M&L for Preparation of Newly Plastered surfaces and applying two coat of Cement Base Paint over a coat of alkali resistant primer on walls complete all as specified and directed.
M/S WASEEM KHAN CONTRACTOR (BID ID -3097321)
M/S S P CONSTRUCTION (BID ID -3105809)
SIDDHIVINAYAK CONSTRUCTIONS (BID ID -3097767)
M/s Moti Babu Agarwal (BID ID -3120709)
M/S SRI JAGDAMBE TRADERS (BID ID -3120556)
M/S SHRI RAM CONSTRUCTION AND SUPPLIER (BID ID -3107994)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .