Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹17.7 LAccepted-AOC | L1 | Accepted-AOC BEING LOWEST | |
| 2 | L2₹20.9 L+₹3.0 L (16.8%)Rejected-Finance | L2 | Rejected-Finance NOT LOWEST |
Tender Value
₹30 L
EMD Value
₹60,000
Closing Date
7 Mar 2023, 5:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE DEOLALI
HQ CWE DEOLALI, ONSLOW ROAD, DEOLALI (MH)
AS PER TENDER DOCUMENTS
2023_MES_579812_1
86903/E8
Open Tender
Civil Works
Item Rate
180 days
DEOLALI
AS PER NIT
7 documents required · 7 mandatory
₹500
Yes
GE DEOLALI
₹60,000
Yes
21 Mar 2023
8 Feb 2023
8 Mar 2023
8 Feb 2023
7 Mar 2023
22 Feb 2023
9 Feb 2023 - 15 Feb 2023
Amount
Taking down Chowkats or frames with shutters (without taking off shutters from the frame) n exc 1.5 sq. m each etc complete all as directed.
Taking down Chowkats or frames with shutters (without taking off shutters from the frame exc 1.5 sq. m but n exc 4 sq. m each etc complete all as directed.
Taking down Shutters exc 1sq.m & n exc 2 sq.m each
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.
Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles etc complete all as directed.
M&L for Brickwork with fly ash bricks Old size bricks in cement mortar 1:6, straight or curved on plan exc 6m mean radius, built in complete all as directed.
Labour only for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as directed.
M& L Stone masonry Walling of random rubble, uncoursed as well bonded built in cement mortar 1:4
Demolition of reinforced cement Concrete of any description and in any position not otherwise specifically provided for complete all as directed.
Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortor etc complete all as directed.
Demolition of plain cement concrete unreinforced in ground floor and paving above or below ground level any thickness etc complete all as directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for and fixed in any position etc complete all as directed.
M&L for 20mm thick black granite (Table rubbed and polished) as in jambs, steps, pillars, window cills, platforms and the like with and including 15mm bedding in CM 1:6 and pointing in white cement (1:2) using marble dust with admixture of pigment to match the colour of granite etc complete all as directed.
Extra over Granite or marble slabs as in rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations etc complete all as directed.
S&F Factory made 35 mm thick Plain framed, panelled door shutter (two panel) with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated etc complete all as specified and directed.
S&F for Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded etc complete all as directed.
S & F 150 mm size aluminium anodised barrel tower bolts of extruded sections, with cast or sheet barrel and rolled or cast bolts etc complete all as directed.
S & F aluminium alloy, anodised, sliding door bolt with hasp, staple & fixed clips of sheet, cast or extruded section & fixed bolts & sliding bolts of extruded section or cast aluminium alloy, length of bolt 300 mm etc complete all as directed.
S&F 100mm size butt hinges, cast brass, with stainless steel hinge pin, bright polished and fixed etc complete all as directed.
S & F 150 mm size extruded aluminium handles fabricated type, anodised and polished etc complete all as directed.
S&F 150mm size aluminium anodised hasp and staple with mild steel hinge pin including bolt to hinge plate and fixed with screws etc complete all as directed.
S&F Mild steel of conforming to Fe 290 grade E-165 as framed work (Angles ,Flat Iron, square/round bars) with ends of bars shouldred and/or rivetted or forged into spikes for window grills/framed guard bars to the design and pattern of ornamental and intricate as approved etc complete all as speciified and drected.
M&L for machine cut hand dressed to true square/rectangles of uniform size kota stone slab flooring 20-25mm thick of size 450 X 600mm laid in floors with and including 15mm thick cement mortar 1:6 cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including mirror polishing etc complete all as directed.
All as per item no 24 above but prepolished stones in skirtings 100mm high with and including 10mm thick cement mortar 1:4 backing coat etc complete all as specified and directed.
M & L for glazed ceramic coloured joint free tiles in vertical surface 450X 300X 7mm thick with and including 10mm thick cement mortar 1:4 backing coat, set and jointed in neat cement slurry and pointed in white or colour cement to match etc complete all as directed.
M & L for Non - skid Glossy finish joint free coloured ceramic tiles 7 to 8 mm thick (square/rectangular) laid in floors area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. with and including 15mm thick screed bed in cement mortar1:6 , set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as directed.
M&L for 75mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate ) as in subase finished to receive floor treatment etc complete all as directed.
M&L Chequered cement concrete tiles 30cmx30cmx25mm thick set, jointed and pointed with white cement and pigments in floors including 15 thick Screed bed in cement mortar ( 1:4) for laying floor finishes
S&F 60 mm thickness M-35 Grade factory made rubber moulded machine pressed precast conctete interlocking paver block in grey cement with pigment glossy fininsh and of approved size and shape and size confirming to IS 15658-2006 etc complete all as directed.
M&L for 30mm thick sand bedding layer for concrete paver tiles laid to true line, level watered and mechanically compacted etc complete all as directed.
M&L for 10mm thick rendering internally in cement mortar 1:6 on fair faces of brickwork or concrete surfaces finished rough true to the plumb surfaces is obtained etc complete all as specified and directed.
M&L for 15 mm thick rendering in cement mortar 1:4 on brick/concrete external surfaces of walls sand faced sponge faced finish etc complete all as directed.
M&L for 5mm thick ceiling plaster on concrete surfaces in cement mortar 1:3 finished even and smooth with a thin layer of sagol.
M&L for preparation of newly plastered surfaces of walls and applying one coat of alkali resistant primer over a coat of 3 mm thick birla white cement putty,sanding the surfaces till smooth finish is obtained and finally applying two coats of oil emulsion distemper etc complete all as directed.
M&L for complete removal of existing treatment on surfaces of walls, removal of unnecessary nails with mechanical means/grinder, including filling of cracks/holes by crack filler etc, preparing surface by one coat of 3 mm thick putty and applying two coats of oil emulsion distemper over one coat of primer complete all as specified and as directed.
M & L for complete removal of existing treatment on surfaces of walls and preparation of old decorated plastered or unplastered surface including all cornices of walls by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts, treating oil and greasy spots and applying two coat of cement based paint on wall etc complete all as specified and directed.
M&L for complete removal of existing treatment on surfaces of walls, applying two coats of weather emulsion (APEX or Equivalent, white/red colour or as specified and directed by Engr-in-charge) " over one coat of primer over 2mm thick Wall Putty for levelling and smoothening, including removal of unnecessary nails, filling of cracks/holes ,repair/crack filler mortar, including preparation of old decorated plastered or unplastered surfaces of walls/ceiling complete all as specified and directed.
S & F 5.50 mm thick sheet glass fixed in window shutters etc complete all as directed.
Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads
S & F 4.00 mm thick figured glass pin headed tupe fixed in ventillators etc complete all as directed.
M & L for preparation of old steel surfaces exc 10 cm width/girth and applying one coats of synthethic enamel paint etc complete all as directed.
M & L for preparation of new or previously untreated steel Surfaces of any description, over10cm in width or girth,not otherwise described and applying two coats of synthethic enamel paint over a coat of red oxide, zinc chrome primer etc complete all as directed.
M & L for preparation of old painted wood surfaces of any description over 10cm in girth or width & applying one coat of synthetic enamel paint etc complete all as directed.
M & L for preparation of new or previously untreated wood Surfaces of any description, not otherwise described,over 10cm width or girthh & applying two coat of synthetic enamel paint over a coat of pink primer etc complete all as directed.
M & L for preparation of previously untreated stone surfaces of any description over 10cm in girth or width & applying two coat of synthetic enamel paint over a coat of primer etc complete all as directed.
M & L for preparation of previously untreated stone Surfaces plain or moulded, n exc 10cm width or girth when unconnected with other painting or when painted in a different tint & applying two coat of synthetic enamel paint over a coat of primer etc complete all as directed.
M&L for mild steel TMT bars 10mm dia and over cut to length ,bent to shape rquired including cranking, bending spirally for hooping for columns & binding with and including mild steel wire (annealed )not less than 0.9 mm dia in reinforcement for man holes cover slabs etc complete all as specified and as directed..
M&L for reinforced cement concrete 1:2:4 type B1(20mm graded stone aggregate) nominal mix as in beams, seimic bands, cantilevers, bressumers and lintels etc, basement slabs, under-reamed piles and mass concrete etc complete all as directed.
M&L for formwork to sides and soffits of floor or roof beams, beams haunchings, girders, bressumers,lintels, cantilevers, shelves including supports overhangs etc also splays between floors and beams etc flat rough finished surfaces of concrete etc complete all as directed.
Dismentling asbestos cement ( corrugated , semi corrugated ) sheets in roof covering .
S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified etc complete all as specified and directed.
S&F for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as directed.
M&L for Mild steel, plain, black sheet 1.60mm thick in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required
Writing letter or figures (Block, Roman, Italic or Indian) n exec 30 cm high all as specified and directed.
M&L for writing stops, commas, short lines, dashes, hyphens, brackets etc
M&L for Hand rails, half round or other steel section or core for wooden hand-rail straight portion,drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts, posts and struts in fencing including cutting tops to shape as directed, drilling holes,notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc.,and similar work conforming to Fe-290 Gde E-165 all as specified and directed.
Cement concrete type D2 1:3:6 (40 mm graded aggregate in foundations, filling and mass concrete
Supply only chain link MS galvanised fencing any size or type
Fixing only chain link fencing including line wires, any mesh, size and type of standard, rails, straining bolts,etc. including provision of binding wire.
S&F in repairs Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and as directed.
Taking down carefully existing unserviceable bitumen felt(any number of layers) including plaster of any thickness,wire brushing and cleaning of the surface of roof terraces including flashing and junctions of parapets kerb wall,PCC fillets,benching etc and removing of the rubbish to a distance not exceeding 500 M from the building and depositing where complete all as specified and directed.
M &L for providing 50 mm thick plain cement concrete 1:2:4 type B-1 (using 12.5 mm graded stone aggregate) Finishing cement concrete surface even and smooth using extra cement for filleting, benching,coving of chajjah top/junctions,padding concrete below roof treatment etc slightly rounded or chamfered on edges wherever required including necessary form work / moulds etc complete all as specified and as directed . Note: Water Proofing compound shall be measured and paid separately.
M & L for cleaning the newly plastered surfaces of concrete ( roof etc) with wire brushes and applying water proofing treatment as under :- i) Apply Priming surfaces and applying normal treatment (for moderate conditions) using glass fibre base bitumen felt, grade 2 ii) Providing and laying 3 mm thick APP modified water proofing membrane weighing not less than 3.0 Kg / Sqm reinforced with non woven polyester mat weighing not less than 150 gm/Sqm all as specified procured from any one of the approved manufacturer's instructions iii) Apply two coat of aluminium paint @ 0.15 Kg/Sqm over membrane over roof surfaces complete all as per manufacturer's instructions and as directed .
Supply only water proofing compund as specified and directed.
M&L for waterproofing treatment to semi-underground water tanks by thoroughly scraping inside surface, cleaned free from dust, paint,oil,grease,sludge,fungus and moss with help of wire/ Tar brushes and using acid wash if required.Opening all construction joints &corners and injecting cementitious grout by injection pressure grouting process in construction joints & corners to fillup porosity in concrete , using pressure grouting hand pump,plastic nozzles, M/s Choksey SBR + Cement slurry, minimum 30 No of holes per tank to cover all leakage area complete all as specified and directed. Note: Work shall be executed through authorised applicator and as directed by the chemical manufacturer.
M&L for Pressure grouting using M/s Choksey SBR chemical and cement mortar and Choksey CNS 50 Non shrink grout. finaly applying two coats of choksey Techforce 2k strong chemicals (2 Component Acrylic polymer based cementitious coating) and applying two oats of choksey Techoxy-3 water Thinnable Epoxy base1food graded chemicals Complete all as specified and directed.Make:-Choksey chemicals . Note: Work shall be executed through authorised applicator and as directed by the chemical manufacturer.
JEET CONSTRUCTIONS CO.
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .