SPECIAL REPAIRS TO Bldg NO 27 and 28 ABOS 20 GIRLS HOSTEL AT RASHTRIYA MILITARY SCHOOL, BELGAUM UNDER GE BELGAUM

Amount

Dismantling single layer Mangalore pattern or similar tiles in roofing and removing rubbish off the premises and old unserviceable tiles taken as credit completer. all as specified and as directed.

Description all as per item no :01 here in before but bedded in lime or cement mortar

Dismantling battens for tiles, etc. of any size spaces exceeding 15 cm including tilting fillets and unserviceable battens taken as credit complete. all as specified and as directed.

Dismantling timber scantling 40 Sqcm and over in section, in any position for unframed work and removing rubbish off the premises and old unserviceable timber scantlings taken as credit complete. all as specified and as directed.

Material and labour for 2nd class hard wood timber scantling cleans sawn and fixed complete all as specified and as directed .

Supply and fix in repairs Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.45mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. Note :Make of Galvalume sheet : TATA Blue Scope Ltd/JSW (Colouron)/LLOYD

Supply and fix in repairs Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.45mm thick of any colour having tensile strength of 550 Mpa as in ridge , valley gutter fixed with self tapping screws complete all as specified and as directed. Note :Make of Galvalume sheet : TATA Blue Scope Ltd/JSW (Colouron)/LLOYD

Supply and fix in repairs Mild steel Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing urlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and as directed

Supply and fix in repairs Mild steel work in tubular tru-sses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240complete all as specified and as directed.

Supply and fix Mild Steel work as in wind ties etc. for roof including securing bolts and cutting tops to shape as directed ,drilling holes ,notching for wire etc conforming to Fe-290 Gde- E-165 complete all as specified and as directed.

Material and labour for High pressure steam cured (HPSC) non asbestos fibre cement building board 4mm thick in false ceiling fixed with aluminum anodized snap grid of 60x60cm in ceiling with Tee section 35x25x1.25mm, L angle section25x25x1.25mm thick including 2mm dia GI hanging wire including all hanger fittings etc and applying three coats of white wash on ceiling board complete all as specified and as directed . Note : (i) Make of HPSC Board : EVEREST /ARMSTRONG (ii) Thickness of aluminium anodisation shall be of 15 microns . (iii) Make of aluminium anodised section : Jindal/Indal/Hindalco .

Taking down chowkats with shutters n exc 1.50 sqm each (without taking off shutters from the frame) and taken as credit complete all as specified and asdirected.

Taking down chowkats with shutters exc 1.50 sqm but n,exc 4.0 sqm each (without taking off shutters from the frame) and taken as credit complete all as specified and asdirected.

Supply and fix Solid PVC door frame of size 50mmx47 mm made out of 5mm wood grain printed PVC sheet , reinforced with MS square tube in opening as per specification and drawing complete all as specified and as directed.

Supply and fix Factory made moulded solid panel PVC door shutter 30mm thick (style) as IS-4020 consisting of frame made out of MS tubes for top and bottom rails.MS frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail ,lock rail and bottom rail on plain side and as gap insert for top and bottom rail. Panelling of prelam colour PVC sheet to be fitted in the MS frame welded /sealed to the stiles & rails with suitable PVC sheet bedding and jointed together with solvent cement as per specification and drawings complete all as specified and as directed..

Material and labour for Aluminium sliding windows (Triple track), fabricated to required size with standard aluminium anodised sections, with bottom track of size 92 x 31.75 x 1.6mm, side and top frame of size 92 x 31.75 x 1.4mm, top and bottom shutter rail of size 39x17x1.4mm, outer style of size 39 x 17 x 1.4mm, interlock style of size 39 x 27 x 1.4mm, including provision of 4mm sheet glass ordinary quality and stainless steel wire cloth 0.36 mm nominal dia of wire & average width of aperture 1.40mm for panels including provision of all hardware fittings such as aluminium anodised handles, locking arrangements, rubber gaskets, rollers, spring catchers etc. complete all as specified and as directed. Note:(i) Each window shall be provided with 2 glazed shutters + 1 wire mesh shutter. (ii) Thickness of aluminium anodisation shall be of 15 microns . (iii) Make of aluminium anodised section : Jindal/Indal/Hindalco . (iv ) Make of Stainless steel wire mesh : (v) Make of Glass : Saint gobain/modi Guard/Gold fish

Supply and fix Mild steel framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted or forget into spikes; framed guard bars; barred iron doors; framed ladders; framed balusters; walk ways; railings; frame work of water tanks and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed

Material and labour for Prelaminated Particle Board 12 mm thick, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws as in cub board shelves/ cabinet works including removal of old unserviceable wooden board of any description and taken as credit complete all as specified and as directed Note : Make of particle board : Swastik/Kitply/M/S Green Ply Industries Ltd

Material and labour for Prelaminated Particle Board 18/19 mm thick, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws as in cub board shelves/ cabinet works including removal of old unserviceable wooden board of any description and taken as credit complete all as specified and as directed Note : Make of particle board : Swastik/Kitply/M/S Green Ply Industries Ltd

Supply and fix 5.5 mm thick Sheet glass, ordinary quality and glazing with oil putty in square not 0.50 Sqm each pane. complete all as specified and as directed . Make of Glass : Saint gobain/modi Guard/Gold fish .

Supply aqnd fix in repairs 140mm size Floor door stopper of aluminium body and tongue, anodised, with hard drawn steel spring, fixed in door complete all as specified and as directed . Make :Classic/Crown/Adarsh

Material and labour for Factory made 35 mm thick second class hard wood, Plain framed, panelled shutter (two panel) with lock rail and panel of 9mm thick plywood BWR 5 ply of rails and stiles sizes of members of shutters as specified in SSR Part I, Section 8. Clause 8.24 (a) and fitted to chowkats complete all as specified and as directed.

Material and labour for factory made 30mm thick guazed and skeleton door shutters, open rebated and prepared to recieve glass, guaze, etc (without sash bars), edges if framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc; sizesof members of shutters as specified in SSR Part I, Section 8. clause 8.24 (a) and fitted to chowkats complete all as specified and as directed.

Supply and fix aluminium alloy anodised sliding door bolt 300mm long with hasp & sample (Bolt type) and fixing clips of sheet cast or extruded section of cast aluminium alloy complete all as specified and as directed . Make : Crown/Classic/Adarsh

Supply and fix MS butt hinges cold rolled medium weight 100mm size fixed with MS screws complete all as specified and as directed.

Supply and fix Stainless steel butt hinges 100mm size fixed with SS screws complete all as specified and as directed.

Supply and fix Aluminium anodised barrel tower bolt of extruded section of size 150mm long complete all as specified and directed. Make : Crown/Classic/Adarsh

Supply and fix Aluminium anodised barrel tower bolt of extruded section of size 100mm long complete all as specified and directed. Make : Crown/Classic/Adarsh

Supply and fix in repairs 125mm long extruded section Aluminium alloy anodised handles D type complete all as specified and directed. Make : Crown/Classic/Adarsh

Supply and fix in repairs 150 mm long extruded section Aluminium alloy anodised handles D type complete all as specified and directed. Make : Crown/Classic/Adarsh

Supply and fix in repairs Hasp and staple,aluminium anodised , 100mm size including bolt to hinges plate and fixed with screwscomplete all as specified and as directed Make : Crown/Classic/Adarsh

Supply and fix in repairs Stainless steel wire cloth 0.36 mm nominal dia of wire & average width of aperture 1.18mm fixed in panel of joinery with stainless steel staples complete all as specified and as directed.

Supply and fix Stainless steel wire cloth 0.36 mm nominal dia of wire & average width of aperture 1.18mm fixed in panel of joinery with stainless steel staples complete all as specified and as directed.

Supply and fix in repairs 3mm thick Sheet glass ordinary quality & glazing with oil putty squares n exc 0.5sqm in each pane including hacking out old broken glass (any thickness,size , quality or description) from wooden frames ,glazed with putty or fixed with beads and removal from site as directed complete all as specified and as directed. Make of Glass : Saint gobain/modi Guard/Gold fish .

Taking down cement plaster on brick or stone wall etc. including racking out joints hacking for key scrubbing down with water etc.complete all as specified and as directed..

Material and labour for Rendering 10mm thick in cement mortar 1:6 on fair faces of brick work or PCC block masonry or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for Rendering 5mm thick in cement mortar 1:4 mixed with water proofing compound over 10mm thick backing coat in cement mortar 1:6 on fair faces of brick work or PCC block masonry surfaces finished even and smooth without using extra cement complete all as specified and as directed. Note: Water proofing compound shall be measured and paid separately.

Supply only integral water proofing compound. Make :Impermo'Roff/Cico

Demolition of cement concrete of any description and in any position , unreinforcedincluding removal of rubbish off the premises completeall as specified and as directed.

Material and labour for Providing cement concrete 1:2:4 type BO (using 12.5mm graded stone aggregate as in roof kerbs or mud stops,coving with rounded or chamfered edges including necessary form work complete all as specified and as directed.

Material and labour for Cement concrete 1 : 3 : 6 type C2, (using 40mm graded stone aggregate) as in surface channels and drainscomplete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

Material and labour for Premium quality glazed ceramic tiles coloured of size 450x300x7 mm thick over vertical surfaces such as skirting , dado etc , set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tile over and including rendering 10 mm thick in CM 1:4 on stone masonry walls as in backing coat of skirting, dado etc complete all as specified and as directed.Note :Make of Glazed ceramic tile : HR Johnson/Kajaria/Somany

M&L coloured ceramic tiles of size 300x450x7 to 8mm on vertical surfaces such as dado, skirting etc set jointed and pointed in neat cement slurry and pointed in coloured cement to match the shade of tile over rendering 10mm thick in cement morter 1:4 on other than fair faces of brick work or stone masonry surfaces in backing coat of skirting, dado etc,complete all as specified and as directed.Note :Make of Glazed ceramic tile : HR Johnson/Kajaria/Somany

Material and labour for Non-skid joint free coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 Sqmbut not exceeding 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over including cement screed bed or bedding layer of mortar in CM 1:6 , 15mm thick complete all as specified and as directed.Note :Make of Glazed ceramic tile : HR Johnson/Kajaria/Somany

Material and labour for light shade Vitrified Ceramic tiles 10 mm thick (square/ rectagular) polished,area of each tile not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over including cement screed bed or bedding layer of mortar in CM 1:6 , 15mm thick complete all as specified and as directed.Note :Make of Vitrified ceramic tile : HR Johnson/Kajaria/Somany

Dismantling of stone slab or tiles of any description in floors, aprons etc., laid bedded and pointed in any mortar and taken as credit complete all as specified and as directed.

Material and labour for Machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over screed bed or bedding layer of mortar 20mm thick for laying of cuddpah slab in CM 1:4. complete all as specified and as directed.

Material and labour for Granite slab 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete over screed bed or bedding layer of mortar 20mm thick for laying of granite slab in CM 1:4. complete all as specified and as directed.

Material and labour for Machine cut granite slab in dado or skirting etc 20mm thick laid over cement screed and jointed with grey cement slurry and pointed with white cement with admixture of pigments to match the shade of granite stone including grinding and polishing and 10mm thick in cm 1 :3 on fair faces of brick work or concrete surfaces as in backing coat of skirting, dado etc, complete all as specified and as directed .

Demolition of cement concrete in ground floors n exc 15cm thick unreinforced (below or above ground level) and removal of debris not exceeding 100 meters complete all as specified and as directed .

Material and labour for Plain cement concrete type C2 1:3:6 (using 40 mm graded aggregate )75 mm thick in plinth protection and finishing the cement concrete surface even and smooth without using extra cement including necessary steel form work complete all as specified and as directed..

Demolition of brick work or stone boulder masonry built in cement mortar or cement lime mortar and removal of debris not exceeding 100 meters and serviceable items taken as credit complete all as specified and as directed .

Material and labour for Pre-cast cement concrete solid block masonary type C1, 1:3:6 (using 20 mm graded stone aggregate) exc 10 cm width and setting in CM 1:6 complete all as specified and as directed

Material and labour for Preparing newly plastered surfaces of walls and applying two coats of oil bound distember ovea a coat of Chalk whiting, on plastered surfacs of wall.complete all as specified and as directed

Supplying and laying 16mm dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceilings or laying in floors including taking down up ro down old damaged pipe and taken as credit complete all as specified and as directed. Note : Make of CPVC Pipe : AShirwad/Astral

Supplying and laying 20mm dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceilings or laying in floors including taking down up ro down old damaged pipe and taken as credit complete all as specified and as directed.Note : Make of CPVC Pipe : AShirwad/Astral

Supplying and laying 25 mm dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceilings or laying in floors including taking down up ro down old damaged pipe and taken as credit complete all as specified and as directed.Note : Make of CPVC Pipe : AShirwad/Astral

Supply and fix in repairs Vitreous china wash basin white flat back size 550x400mm , including cutting for and pinning in ends of CI brackets or erecting stand etc.complete all as specified and as directed.

Material and labour for 300mm, Mid steel ordinary rat tail rod pattern springs including roller and roller plate , fixed in repairs complete all as specified and as directed.MAKE:CROWN/ ADARSH/ JYOTHI/ CLASSIC

Supply and fix in repairs Tubular towel rail, Brass chromium plated 20mm dia, D type, 60cm long between flangess. complete all as specified and as directed.

Supply and fix in repairs Vitreous china squatting pan , Orissa pattern IWC of size 580x440mm white with integral foot rest complete including lime concrete bedding. complete all as specified and as directed.

Supply and fix PVC (SWR) pipes 110mm dia, single socketed in any length fixed to walls & jointed with rubber ring joints including Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar and removal of debris not exceeding 100 meters complete all as specified and as directed Note:Make of PVC(SWR) Pipe :Finolex/Supreme

Supply and fix PVC (SWR) pipes 75 mm dia, single socketed in any length fixed to walls & jointed with rubber ring joints including Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar and removal of debris not exceeding 100 meters complete all as specified and as directed . Note:Make of PVC(SWR) Pipe :Finolex/Supreme

Supply and fix100 mm dia PVC (SWR) bends any radius complete all as specified and as directed.Note:Make of PVC(SWR) fittings :Finolex/Supreme

Supply and fix100 mm diaPVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and as directed Note:Make of PVC(SWR) fittings :Finolex/Supreme

Supply and fix 100 mm dia PVC (SWR) branch piece, double (double Y), equal or unequalcomplete all as specified and as directed . Note:Make of PVC(SWR) fittings :Finolex/Supreme

Supply and fix 75 mm dia PVC (SWR) bends any radiuscomplete all as specified and as directed Note:Make of PVC(SWR) fittings :Finolex/Supreme

Supply and fix75 mm diaPVC (SWR) branch piece, single (single Y) equal or unequalcomplete all as specified and as directed Note:Make of PVC(SWR) fittings :Finolex/Supreme

Supply and fix 100 mm PVC (SWR) vent cowl complete all as specified and as directed .Note:Make of PVC(SWR) fittings :Finolex/Supreme

Material and labour for 75mm dia outlet. PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and as directed. Note:Make of PVC(SWR) floor trap :Finolex/Supreme

Supply and fix in repairs 50mm bore PVC pipes(LDPE) of pressure rating 6 kg/sqcm and fixed complete to walls, ceilings or in floors complete all as specified and as directed.Note:Make of PVC(SWR) Pipe :Finolex/Supreme

Material and labour for PVC (SWR) gully trap 125/110mm, setting and jointing with solvent cement complete all as specified and as directed.

Supply and fix in repairs 15 mm bore Bib tap, brass chromium plated, long body , fancy type, , screwed down high pressure with crutch or butter-fly handle , screwed for iron pipe or for brass ferrule etccomplete all as specified and as directed.Make : Metro/Waterman /ESS ESS .

Supply and fix in repairs 15 mm bore Pillar taps fancy type , cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixedcomplete all as specified and as directed.Make : Metro/Waterman /ESS ESS

Supply and fix in repairs PVC connection 15 mm size with PTMT of 600 mm longcomplete all as specified and as directed. Make :Prayag/M/S Shakthi Industries

Supply and fix in repairs low level PVC valveless ,syphonic action type flushing cistern 10 Litres capacity , white with inlet ball valve ,float and handle including brackets and PVC flush pipe with outlet pipe to connect the WC complete all as specified and as directed. Make :Parryware (Slim line )/Hindware/Marc

Supply and fix in repairs Stop valves fancy type brass chromium plated with long shank and cup (concealed type) screwed down high pressure with crutch or butter fly handle screwed both ends for 15mm bore GI pipe or for union complete all as specified and as directed..Make : Metro/Waterman /ESS ESS

Supply and fix in repairs Concealed Stop valve, cast copper alloy chromium plated screwed down, high pressure, with crutch handle conforming to IS-781 of 1984 screwed both ends suitable for 15mm bore pipe or for unions. complete all as specified and as directed. .Make : Metro/Waterman /ESS ESS

Supply and fix in repairs Shower rose with swivel joint Brass CP shower rose 125mm size for fixing with 15mm bore pipe.complete all as specified and as directed. .Make : Metro/Waterman /ESS ESS

Taking down eaves gutter pipes, rain water pipes (of any size or pattern) including fittings, head shoes, bends, swan neck etc and taken as credit complete all as specified and as directed.

Supply and fix PVC (SWR) eaves gutter Half Square/half rounded 150mm dia complete all as specified and as directed.Make :Finolex/Supreme

Supply and fix in repairs PVC waste pipes of dia 32mm suitable for kitchen sinks and Wash Hand basins complete all as specified and as directed.Make :Finolex/Supreme

Supply and fix in repairs Vitreous china wash down water closet pan (pedestal pattern) white fixing with MS bolts on existing surface and making good the disturbed surface complete all as specified and as directed .

Supply and fix in repairs Seat cover for EWC closed pattern with flat bottom and mild steel chromium plated hinging device complete all as specified and as directed.

Supply and fix in repairs 32 mm dia Waste coupling of PTMT (half or full threaded) .(Minimum weight 32mm-45gms) complete all as specified and as directed . Make :Prayag/M/S Shakthi Industries

Material and labour for Preparation of new wooden surfaces exc 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer. complete all as specified and as directed.

Material and labour for Preparation of new steel surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of zinc chrome red oxide primer all as specified and as directed.

Material and labour for Two way bib taps, brass, chromium plated, fancy type, long body, screwed down, screwed for 15mm bore iron pipes or brass ferrule, fixed in repairs complete all as specified and as directed.Make : Metro/Waterman /ESS ESS

Material and labour for Health faucet, CP, with 1 metre flexible tube with wall hook, fixed in repairs complete all as specified and as directed. Make: Cat No. 563 of JAQUAR or equivalent model in MARC/Hindware

Supply and fix in repairs 25mm dia single curtain rod with rounded fancy ends fixed to brackets with necessary drilling and plugging the holding screws complete all as specified and as directed .

Material and labour for complete removal of existing treatment and Preparation of old surfaces of walls, pillasters, roof projections, facias, drops, chajjas, etc and applying two coats of weather proof exterior acrylic emulsion paint over a coat of alkali resistant primer complete all as specified and as directed.

Material and labour for complete removal of existing treatment and Preparation of old surfaces of walls, pillasters, roof projections, facias, drops, chajjas, etc and applying two coats of oil bound distemper over a coat of alkali resistent primer over 1mm thick layer of wall care putty complete all as specified and as directed.

Surface excavation not exc 30 cm deep and averaging 15 cm deep and getting out in hard/dense soil complete all as specified and as directed.

Material and labour for hard core with broken stone or boulders of gauge not exc 63 mm deposited spread and levelled in layers not exc 15 cm thick and well rammed to a true surfacescomplete all as specified and as directed.

Material and labour for Plain cement concrete type D2, 1:4:8 (using 40mm graded stone aggregate) in foundationn and mass concrete complete all as specified and as directed

Material and labour for River Sand filling under floors or in foundations including spreading ,levelling , watering and consolidation complete all as specified and as directed.

Material and labour for Machine pressed precast concrete interlocking colour paver block of 60mm thick any shape and size with glossy finish on top confirming to IS 15658-2006 , with grey cement and pigment ,M-35 grade complete all as specified and as directed.

Excavating in trenches n.exc 1.5 m wide and n.exc 1.5 m in depth for foundation/laying of cables/GI tubes etc, and getting out in hard /dense soil complete all as specified and as directed.

Material and labour for Plain cement concrete type C2, 1:3:6 (using 40mm graded stone aggregate) in foundationn and mass concrete complete all as specified and as directed

Returning filling in excavated soil including spreading, leveling Watering and well ramming in layers n.exc 25cm complete all as specified and as directed.

Removing excavated soil n.exc 50 m and depositing where directed at a level n.exc 1.5 m above the starting point completeall as specified and as directed .

Material and labour for Providing plain cement concrete 1:2:4, type B1 (using 20 mm graded stone aggregate) as in haunching / channel inside manholes, surfaces finished even and smooth using extra cement, including necessary formwork complete all as specified and as directed.

Material and labour for Providing plain cement concrete 1:2:4, type B1 (using 20 mm graded aggregate) as in cills, steps, bands, copings, bed plates , etc including necessary form work, complete all as specified and as directed

Material and labour for Rendering 15mm thick in CM 1:4 on PCC block or stone masonry surfaces and finished even and smooth without using extra cement complete all as specified and as directed.

Dismantling concrete posts or struts any section, including taking out embedded portion and making good disturbed ground and removal of debris off the premises and taken as credit complete all as specified and as directed.

Excavating in post holes each nexc 0.5cum and getting out in hard/dense soil,returning and filling in ,ramming earth filling or broken rubble mixed with earth around in layers nexc 25cm watering and removing surplus soil to a distance nexc 50m and making good the disturbed surfaces etc complete all as specified and as directed.

Supply and fix Rolled mild steel angle fixed independently, without connecting plates, etc and embedding in concrete post and struts in fencing including securing bolts and cutting tops to shape as directed, drilling holes, flat iron fillets (for securing wire mesh) confirming to Fe 410-W (Gde E-250) quality-A.complete all as specified and as directed.

Supply and fix Mild steel TMT bars 10mm dia and over, cut to length bent to shape required, including cranking, hooking ends and binding with mild steel (annealed) not less than 0.9mm dia. complete all as specified and as directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and as directed.

Supply only Chain link MS galvanisd fencing, any size or type not exc 4 kg per sqmFe 410-W(Gde E-250) quality-A including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and as directed.Make Tata/ SAIL/RINL

Supply and fix MS screw bolts (machine made) with hexagonal or square head at one end and screwed to other or screwed both ends n exc 5 cm long and 5 to 10mm dia shank bolt complete all as specified and as directed

Supply and fix Mild steel flats for screwing chain link fencing including securing bolts and similar work conforming to Fe -290 Gde E-165 complete all as specified and as directed

Material and labour for Preparation of new surfaces of steel of any description n exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of zinc chrome red oxide primer complete all as specified and as directed

Taking down carefully Aluminum/copper point wiring complete for light, fan, 5 A socket, 15 Amps socket, 2 way points and bell point etc in any type of wiring with boards, holders and any type of electrical fittings etc complete & making good the disturbed area and taken as credit complete all as specified and as directed.

Taking down carefully sub main wiring of any type and size and provision of new sub main wiring with 2 runs of single core PVC insulated unsheathed multi-stranded copper conductor cables of size 6 Sq mm drawn through and including PVC casing and capping of suitable size with all necessary fittings and provn of one run of 6 sqmm pvc insulated unshealted multistranded copper conductor single core for earth continuity and connected to common earth dolly and taken as credit complete all as specified and as directed.

Material and labour for Point wiring 1.5 Sqmm single core PVC insulated FRLS unsheathed 1100 volts grade copper conductor multi-stranded cables drawn through and including PVC casing capping of suitable size with all necessary fittings and provision of one run of PVC insulated FRLS unsheathed 1100 volts grade copper conductor multi-stranded single core cable of size 1.5 sqmm and connected to common earth dolly including provision of suitable size of modular PVC surface box fixing on wall with and including white colour cover plates for mounting modular type switches, sockets, fan regulators, bell pushes etc. for one light point controlled by one switch 1 way complete all as specified and as directed. NOTE: (i) Make of PVC cable :Finolex/Polycab/RR Kabel (ii) Make of PVC casing and capping : Avon Plast/Presto plast /Garware

All as described in item No. 118 here in before but for One fanpoint controlled by one switch and regulator

All as described in item No. 118 here in before but for one call bell point controlled by one bell push

All as described in item No. 118 here in before but for one 05 Amps socket outlet on independent board.

All as described in item No. 118 here in before but for one 05 Amps socket outlet on the same board with other switches.

All as described in item No. 118 but wiring with 2.5 SqmmFRLS PVC insulated unsheathed cable copper conductor multi stranded (for 15 Amps power socket) with one run of copper conductor FRLS PVC insulated multi-stranded cable 2.5 Sqmm for earth continuity conductor and connecting to common earth dolly, complete all as specified and as directed.

Material and labour for Provision of sub main wiring with 2 runs of single core FRLS PVC insulated unsheathed multi-stranded copper conductor cables of size 6 Sq mm drawn through and including PVC casing and capping of suitable size with all necessary fittings and provn of one run of 6 sqmmFRLS PVC insulated unshealted multistranded copper conductor single core for earth continuity and connected to common earth dolly complete all as specified and as directed.

Supply and fix in repairs Modular switch piano type 6 Amps flush button 230 volts AC one way, complete all as specified and as directed. Make -Anchor (Roma)/Legrand/CONA

Supply and fix in repairs Modular bell push flush type AC 230 Volts 6 Amps, complete all as specified and as directed.Make -Anchor (Roma)/Legrand/CONA

Supply and fix in repairs Modular switch piano type 16 Amps flush button 230 volts AC one way, complete all as specified and as directed. Make -Anchor (Roma)/Legrand/CONA

Supply and fix in repairs Modular socket outlet 6 Amps 2/3 pin combined flush type multipurpose 2 module,complete all as specified and as directed. Make -Anchor (Roma)/Legrand/CONA

Supply and fix in repairs Modular socket outlet 6/16 Amps 2/3 pin combined flush type multipurpose 2 module,complete all as specified and as directed. Make -Anchor (Roma)/Legrand/CONA

Supply and fix in repairs Modular fan regulator electronic step type 2 module suitable for 1200/1400 mm sweep ceiling fan completeall as specified . Make -Anchor (Roma)/Rider

Supply and fix in repairs or replacement of PVC or Polycarbonate ceiling rose 3 terminal , isolated body suitable for 230 volts AC supply, complete all as specified and as directed. Make -Anchor (Roma)/Legrand/CONA

Supply and fix in repairs Call bell, ding dong, 230 volts AC supply completeall as specified . Make -Anchor (Roma)/Rider

Supply and fix in repairs LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed. Make : Philips cat part no : SLIMLINE 20W or equivalent price and specification of M/S Wipro/CG

Supply and fix in repairs LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed. Make : Philips cat part no : SLIMLINE 10W or equivalent price and specification of M/S Wipro/CG.

Supply and fix in repairs LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and as directed . Make : CG cat part no : LCTLR-36-FO-CDLPor equivalent price and specification of M/S Wipro/Philips

Supply and fix LED street light fitting 25 Watt 230 V AC outdoor type with high pressure die cast aluminum housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed.. Make : Philips cat part no : Philips BRP020 LEDHP/CW 240V 25W or equivalent price and specification of M/S Wipro/CG

Supply and fix Sheet metal enclosure type TPN Vertical Loadline DBs fitted with Bus Bars, Neutral Links, Blanking Plates (without MCCB) 4 Way with double door type and including provision of 2nd class hard wood board with sunmica top of suitable size fixed to wall and fixing of the MCB DB on board complete all as specified and as directed. . Make: Siemen /Legrand/ABB

Supply and fix MCCB TP 125 A 25KA 50HZ AC supply current rating conforming to IEC-609472 & IS-139473 including dismantling old one and taken as credit complete all as specified and as directed.. . Make: Siemen /Schneider/ABB

Supply and fix Sheet metal enclosure MCB DB SPN 12 way with 200 Amps rated bus bar double door type and including 2nd class hard wooden board 4cm depth with sunmica top of suitable size to fix the MCB DB, complete all as specified and as directed. Make : Legrand/L&T/Indo Asian

Supply and fix MCB DP 40 A 10KA C series 50HZ AC supply including dismantling old one and taken as credit complete all as specified and as directed.. . Make: Siemen /Schneider/ABB

Supply and fix MCB DP 63 A 10KA C series 50HZ AC supply including dismantling old one and taken as credit complete all as specified and as directed.. . Make: Siemen /Schneider/ABB

Supply and fxi MCB SP 240 Volt capacity 5 to 32 Amps‘C’ series, complete all as specified and as directed. Make: Siemen/ABB/Legrand

Taking down existing unserviceable energy meters,dismantling and removing energy meter to store

Supply and fix electronic meters temper proof LCD display with polycarbonate cover 230 V, 10- 60Amp, accuracy class-I 50Hz, conforming to IS 13779, IP-54, with parameters to show data, time, current reading, load, PF, voltage and KWH complete all as specified and as directed . Make : Secure/L&T/HPL

Supply and fix Sheet Moulding Compound (SMC) box of size 250x250x155 mm or suitable size for single phase meter, off white colour, with front hinged type door and locking arrangement, front side transparent and of size suitable for single phase AMR Meter and box fixed on wall with suitable Screws complete all as specified and as directed.Make: SINTEX (GS MB 2525 NF) /Hensel

Material and labour for Electrical earthing complete with galvanised steel earth plate electrode 60cmx60cmx6mm thick, burried directly in ground vertically, (earth pit not less than 2.25 metre deep below normal ground level) with top edge of the earth plate at a depth not less than 1.5 metre below normal ground level, connected to GI wire 4mm dia (7.5 metre long) by means of bolts, nuts, washers made of galvanized iron connected to earthing to body of equipment. GI wire protected by 15mm dia light grade GI pipe (7.5 metre long) and watering arrangements with 20 mm dia GI pipe medium grade and GI funnel all as specified and shown in Electrical Plate No 3 of MES Schedule (SSR) Part I including necessary excavation and earth work in any type of soil, charcoal dust salt, and PCC 1:2:4 type B1 in chamber, RCC 1:2:4 type, B1 cover slab, 40mm thick with 6mm dia mild steel bars at 100mm centre to centre both ways and with 6mm dia MS hook complete, and testing of Earth resistance complete all as specified and as directed.

Supply and fix electric water heater,storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc.complete all as specified and as directed.. . Make: RACOLD/ BAJAJ/Venus

Supply and fix Single pole and neutral enclosure, powder coated, with a two pin earth plug and socket complete, 20 Amps, 240V, including provision of one single pole MCB 20 Amps 'C' curve type complete all as specified and as directed. Make : IndoAsian/ L&T/Siemen

Supply and fix PVC connection 15mm size with PTMT nuts and suitable for hot/ cold water supply with suitable length complete all as specified and as directed. Make :Prayag/M/S Shakthi Industries

Taking up or down steel tubing of size upto 40 mm bore and connections and taken as credit complete as per specified and as directed.

Taking up or down steel tubing of size upto 25 mm bore and connections and taken as credit complete as per specified and as directed.

Supply and lay 40 mm bore Galvanized iron pipe , “Medium grade”, including all fittings laid in trenchescomplete all as specified and as directed. Make : TATA/JINDAL/Prakash surya

Supply and lay 25 mm bore Galvanized iron pipe , “Medium grade”, including all fitting slaid in trenches Make : TATA/JINDAL/Prakash surya

Dismantling water tanks of any description and of capacity 500 litres and not exceeding 1000 litres including connections and taken as credit complete all as specified and as directed.

Supply ,erect and connect 1000 litres capacity Rotational moulded Polyethylene water storage tank ISI Marked (cylindrical vertical with closed top) Double layered ,hoisted and connected to pipeline inlet ,outlet and fixed in position complete all as specified and as directed.Make : Sintex/Polycon/Vectus

Supply and fix 25 mm dia PTMT ball valve high pressure (Minimum weight :210 gms) with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete all as specified and as directed.Make : Prayag/M/S Shakthi Industries

Supply and fix 40 mm bore dia gun metal gate valve heavy duty ISI marked with iron wheel head screwed both ends to iron pipes and fixed complete all as specified and as directed.Make : Leader/Kirloskar/Zoloto

Supply and fix 25 mm bore dia gun metal gate valve heavy duty ISI marked with iron wheel head screwed both ends to iron pipes and fixed complete all as specified and as directed.Make : Leader/Kirloskar/Zoloto

Supply , lay and test cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 35 sqmm 3.5 core including lugs,thimbles and ferrules etc laid in trenches ,fixed to wall ,floor etc complete all as specified and as directed.Make : Gloster/Poly cab/CCI

Supply , lay and test cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 16 sqmm 3.5 core including lugs,thimbles and ferrules etc laid in trenches ,fixed to wall ,floor etc complete all as specified and as directed.Make : Gloster/Poly cab/CCI

Material and labour for Double wall corrugated High Density Polymer Ethyl pipe(SDR 17) of ISI marked 63 mm outer dia including necessary fittings like couplers,bends,end caps etc as in cable protection fixed to poles with necessary suitable MS clamps, bolts, nuts, washers or laid in trenches/ roads crossings etc.complete all as specified and as directed. Make : Ketron/Rex/Duraline

Supply and lay 50 mm bore Galvanized iron pipe , “Light grade”, including all fittings and fixed on pole/walls/in road etc for cable protection complete all as specified and as directed. Make : TATA/JINDAL/Prakash surya

Supply and install Steel tubular swaged poles Type 410 SP-31 (9.0 metres long) swan neck type complete with CI base plate and finial and single swan neck including foundation and coping as per manufacturers instructions complete all as specified and as directed. Make :

Supply and fix LED street light fitting 60 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protectioncomplete all as specified and as directed. Make : Crompton cat part no :LSTP-60-CDL /equivalent price and specification of Wipro/Philips

Supply and fix Factory made (CPRI approved) weather proof, dust & vermin proof street light junction box of size 200 (L) x 200 (B) x 100 (D) mm (minimum dimensions) made up of 3.15 mm thick CRCA sheet, powder coated after preparation of surfaces comprising of 04 Nos aluminium bus-bar of size 20 x 4 mm mounted on suitable sized spacer insulators with provision of 01 No MCB SP 6 Amps, 10 KA breaking capacity, "C" curve & two openings at the bottom & one opening at the top with cable glands & fixing with the help of suitable sized MS clamps to steel poles including testing complete all as specified and as directed. Make of MCB : SCHNEIDER/ABB/SIEMENS.

Supply and fix ceiling fans complete with blades, down rods, electronic regulator and accessories, 230V, 1200 mm swep, min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete as specified and directed. Make: Bajaj, Orient, Crompton

M/s B C CHOUGULE

SHRI.H.R.PATIL

M/s. N D KALING

M/s. VIJAY ELECTRICALS

M/s. KIRAN M CHOUGULE

ASHOK M RAJGOLKAR

RAJENDRA KRISHNA SARAF

Vinod Enterprises

M G KANADIKAR ENGINEERS AND CONTRACTORS

ASHIRWAD ELECTRICALS