PERIODICAL SERVICES TO GODOWNS OF CSD DEPOT REPAIR REPLACEMENT TO FLOORING IN AND AROUND ADM BLOCK MAIN GATE RMs OFFICE AND REPAIR TO ROLLING SHUTTERS AT CSD DEPOT KIRKEE UNDER GE MH AND RH KIRKEE

Amount

Taking down cement or cement lime plaster on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for 10 mm thick plastering on fair faces of brickwork or concrete surface in CM 1:6 with sagol finish not less than 1mm thick on plastered surface complete all as specified and directed by Engr-in-Charge

M&L rendering 15 mm thick (10mm + 5mm) plaster on fair face of brick work in CM 1:4 and surface finished even and fair by mixing liquid water proofing compound as per manufacturers instructions complete. Note :- Liquid WPC shall be measured & paid seprately under relevant item of this BOQ.

M&L for water proofing plaster at the junction of wall and slab at chajjas, lintels etc of average thickness 20mm in CM 1:3 mixed with liquid water proofing compound as per manufactureres instructions on finishing even and fair without using extra cement all as specified and directed. Note: Liquid WPC shall be measured and paid seperately under relevant item of this BOQ.

M&L rendering 5 mm thick in cement mortar 1:4 on fair faces of concrete surfaces of ceiling finishing even and smooth without using extra cement complete all as specified and directed.

Supply only liquid water proofing compound hydroseal-W+ or eqivalent (for plaster hardening, to control efflorescence & fungal growth) as approved by GE.

M&L for preparation newly plastered surfaces of walls/ceilings and applying two coats of weather proof acrylic exerior paint (100%) Acrylic) over one coat of self primer including scaffolding, trestles, ladders, cradles and necessary safety measures complete all as specified.

M&L for preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper over a coat of alkali resistant primer complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying two coats of cement base paint over a coat of primer including scaffolding, trestles, ladders, cradles and necessary safety measures complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed by Engr-in-Charge.

M&L preperation of old wall surfaces and applying one coats of white wash on walls all as specified and directed by Engineer-in-Charge

M&L preperation of old wall surfaces and applying one coats of white wash on ceiling all as specified and directed by Engineer-in-Charge

M&L for preparation of old plastered surfaces of wall & applying one coat of oil bound distemper complete all as specified & directed.

M&L for preparation of old plastered surfaces of wall and applying one coat of cement base paint including scaffolding, trestles, ladders, cradles and necessary safety measures complete all as specified and as directed.

M&L for complete removal of existing treatment & applying two coats of oil bound distemper of approved colour and pattern over a coat of primer complete all as specified and directed by Engr-in-Charge.

M&L for complete removal of existing treatment & applying two coats of plastic emulsion paint over a coat of primer all as specified and directed.

M&L for complete removal of existing treatment of old surfaces and applying two coats of weather proof acrylic exterior paint (100%) Acrylic) over one coat of self primer including scaffolding, trestles, ladders, cradles and necessary safety measures complete all as specified and directed by Engr-in-Charge.

M&L for preparation of old surfaces of wood and wood based materials of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as directed

M&L for preparation of old painted surfaces of steel of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for applying one coat of aluminium paint on steel and iron surfaces of any description over 10cm in width or girth not otherwise described including preparation of old painted steel surfaces complete all as specified and directed.

M&L for writing letters or figures (Block, Roman, Italic or Indian) n.exc 30 cm high using specific brush complete all as specified and directed by Engr-in-Charge.

Hacking out old broken glass, (any thickness, size, qulaity or description) metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new one all specified and directed

S&F sheet glass, 3mm thick, ordinary quality and glazing with oil putty in square n exc 0.5sqm in each pane all as specified and directed.

S&F 4mm thick coloured figured glass, pinhead type with oil putty in squares n exc 0.5 sq. m each pane all as specified and directed

M&L for securing glass of any description in existing metal frames glazed with oil putty/ beads including removing loose or decayed putty/beads, painting/oiling one coat on rebates, grooves, reputtying and painting etc to match existing surface.

M&L for electric welding in repairs n exc 2.5 cm in length and n exc 6mm thickness of metal to be welded including cleaning and preparation of existing surface complete all as specified and directed.

S&F in repairs 140mm long floor door stopper of brass body and tongue, anodised with hard drawn steel spring fixed in floor including vulcanised rubber piece and necessary cutting and securing into the floor complete all as specified and as directed.

M&L for Chipping of loose concrete carefully broken plastering in chajjas ceiling, fins, fascias and applying one coat of rust remover of approved brand DR FIXIT PIDICRETE and applying one coat of approved concrete bonding agent for old and new plaster/concrete including Rendering 20mm thick in CM 1:4 in two coats i. e. each coat 10mm thick as in repairs of chajjas, ceiling, fins etc finished even & fair complete all as specified and as directed by the Engineer-in-Charge. Note : The unit rate quoted shall be deemed to include cost of rust remover and concrete bonding agent.

Demolition of brick work PCC block mansonry or stone boulder masonary built in cement mortar including all quoins arches pillars etc. but excluding ashlar facing dressed stone work and precast concrete articles.

M&L brick work with fly ash bricks, old size, straight or curved on plan exc 6 cm mean radius built in cement mortar 1:6 all as specified and directed.

Taking down Rolling shutters with frame etc complete all accessories area exceeding 10.00 sqm each shutter complete all as specified and directed.

S&F steel rolling shutters, 1.00 mm thick of laths, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer, erected in position as indicated, complete with gear operated type with bevel gear box and crank handles complete all as specified and directed.

S&F for saftey lever locks mild steel with 4 levers for rolling shutters complete as specified.

S&F for ball bearing for rolling shutters complete all as specified and directed.

M&L for Preparation of new primed steel surface of any description over 10 CM width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.

M&L for 15 mm thick rendering in CM 1:4 on fair faces brick work or concrete surfaces finishing even & fair without using extra cement complete all as specified and directed.

M&L for prepration of newly plastered / unplastered surfaces of walls including cornices, pilasters etc and applying three coats of white wash complete all as specified and directed.

M&L for prepration of old surfaces and applying two coats of white wash on wall complete all as specified and directed.

Demolition of cement concrete as in ground floors and paving n exc 15 cm thick (below or above the gound level) compete all as specified and directed.

M&L for cement concrete M-40 grade (design mix) work as in pavment/hardstanding using not less than 400 kg of cement per cum and thickness of concrete shall be 250 mm or less complete all as specified and directed.

Spike rolling to surfaces or making impressions of expanded metal, whilst the concrete is green complete all as specified and directed.

Excavating in existing drainage (disilting of existing drainage) up to 1.50m depth complete all as specified and directed.

Surface excavation as in berms dressing not exc 30 cm and averaging 15 cm deep and getting out in soft / loos soil complete all as specified and directed

Removing of excavated materials n. exc 50 m and depositing where directed at a level n exc 1.5 m above the ground level complete all as specified and directed.

M&L for 40 mm thick cement concrete M-15 grade (nominal mix) using 20 mm graded stone aggregate as in sub base floor complete all as specified and directed

M&L for 20 mm thick screed bed in cement mortar 1:4 complete all as specified and directed.

M&L for heavy duty out door tiles (High MOH hardness value more than 6) 15-20mm thick (square/rectangular) area of each tiles not exceeding 0.36sqm in floors exc.set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and directed Make :Johnson endura Meteor tiles/Somany durastone or other equivalent

M&L for hard core of broken stone or boulders n exc 63mm, deposited, spreaded and levelled in layers n exc 15 cm thick, watered and rammed to a true sutfaces all as cspecified and directed by Engineer In Charge

M&L for 75mm thick, PCC M-10 grade (nominal mix) using 40 mm graded stone aggregates as in sub base of floor/ pavement, all as specified and directed by Engr-in-Charge.

M&L for Sand filling under floors or in foundation including consolidation. The thickness of sand cushion should not be less than 25mm for laying paver blocks.

M&L for PVC moulded machine pressed precast concrete interlocking paver block any colour, shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade all as as specified and directed.

M&L for plain cement concrete M-15 grade (nominal mix) using 20mm graded stone aggregate as in lintels upto 1.50m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses parapets and railings upto 60 cm in height copings, kneelers, apex stones bed plates or as in feeding mangers etc complete all as specified and directed.

M&L for preparation of new steel surfaces of any description, not otherwise described, over 10cm width or girth and applying two coat of synthetic enamel paint over one coat of red oxide primer all as specified and directed by Engr-in-Charge.

M&L for providing plain cement concrete M-10 grade (nominal mix) using 40 mm graded stone aggregate) as in bed of surface channels and drains complete all as specifed and directed.

S&F mild steel TMT bar 8 mm dia and over, cut to length bent to shape reqd incl cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia all as specified and directed.

M&L for precast reinforced cement concrete M-15 grade (nominal mix) using 20 mm gradede stone aggregate as in cover slabs for manholes etc including necessary formwork and placed in position complete all as specified and directed.

M&L for framed work such as grills, gratings, etc with ends of bars shouldered and/ or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk way railings, frame of water tanks and similar work conforming to Fe 290. Gde E 165 all as specified and directed.

S.R.M.K Enterprises

M/S SANDEEP CONSTRUCTION COMPANY

A S Shingote

TULSAYA CONSTRUCTION

bhardwaj enterprises