REPAIRS TO ROOF, FLOORING AND CEILING WORKS AT PEDONG, ALGARAH, DALAPCHAND, AP ALGARAH AND TEESTA TCP UNDER GE 867 EWS

Amount

S&F 0.63 mm thick galvanised, corrugated mild steel sheeting with two corrugation side lap fixed with "L" or "J" type hook bolts and bitumen washers as in roof covering etc.,with grade of Zinc coating 275 Grms/Sqm including taking down existing steel sheetng of any type complete all as specified and directed by Engineer-in-Charge.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated (Trepezium or tiled pattern etc.,) steel sheet 0.50 mm thick (with 0.45 mm BMT) of any colour having tensile strength of 550 Mpa (pitch of corrugation shall be 200mm to 250mm and crest shall be 28mm to 32mm) as in roof covering/ cladding to wall fixed with self tapping screws including dismatling of existing steel sheeting of any type complete all as specified and directed by Engineer-in-Charge.

S&F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick (with 0.45 mm BMT) of any colour having tensile strength of 550 Mpa as in roof covering, eaves board, ridges, hips,valley gutters, drip and straight flashing cladding to wall etc, fixed with self tapping screws including dismatling of existing steel sheeting of any type complete all as specified and directed by Engineer-in-Charge. Make for Item No. 2&3: TATA BLUESLOPPE/ LLYODS /JMBS/ EVEREST INDUSTRIES LTD/CRIL or equivalent as approved by GE.

S&F 0.63 mm thick galvanised, plain mild steel sheeting fixed with "L" or "J" type hook bolts and bitumen washers as in ridges, hips,valley gutters, drip and straight flashing etc.,with grade of Zinc coating 275 Grms/Sqm including taking down existing steel sheetng of any type complete all as specified and directed by Engineer-in-Charge.

S&FS&F 1mm thick Mild steel galvanised class 3 sheet as in eaves gutters, 125mm dia, half round with rounded edges including taking down existing eaves gutters complete all as specified and directed by Engineer-in-Charge.

M&L for 4mm thick asbestos cement building boards, fixed with nails to tmber frame work including taking down existing boards of any type complete all as specified and directed by Engineer-in-Charge. MAKE: Bison/NCL/EVEREST/UPAL or eqivalent as approved by GE.

M&L for 4mm thick plywood with commercial face veneers, BWR grade, type BB, fixed with screws to tmber frame work in ceiling including taking down existing plywood of any type complete all as specified and directed by Engineer-in-Charge.

M&L for 6mm thick plywood with commercial face veneers, BWR grade, type BB, fixed with screws to tmber frame work in ceiling including taking down existing plywood of any type complete all as specified and directed by Engineer-in-Charge.

M&L 12mm thick veneered particle board, exterior grade, with decorative face veneers on one face fixed with screws to timber frame work complete including taking down existing unserviceable boarding of any description all as directed by Engr-in-charge. Make for ItemNo. 7 to 9:- Green ply/Kitply/Century/National/Swastik/ Ecoboard/Alishan/ Marino/ Archid or equivalent as approved by GE.

M&L for false ceiling with light weight PVC hollow section panels made of 1mm thick PVC sheet and overall thickness of panel minimum 7mm and 200mm wide strips fixed in and including GI frame work of size 605 x 605 mm, for seamless celing comprising of GI perimeter chanel 0.55mm thick with two unequal flanges of 20 and 30 mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/ intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including taking down existing ceiling boards of any type complete all as specified and as directed by Engineer-in-charge. MAKE: Rajshree plast wood/Sintex/Nandi or equivalent as approved by GE.

M&L in repairs second class hard wood clean sawn fillets of sectional area exceeding 6 Sqcm and not exceeding 13 Sqcm, square, rectangular or triangular in section, fixed with nails or brads complete all as specified and as directed by Engineer-in-Charge. WOOD: Sal/Kalasiris/Chaplash/Hollock/Bijasal

M&L Preparing new or previously un treated surfaces of wood and wood based surfaces of any description not exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer all as specified and directed. Make: ASIAN/ SHALIMAR/ BERGER/ JENSON&NICHOLSON/IEL/ NEROLAC

M&L for preparing newly plastered surfaces of AC board ceilings and applying three coats of white wash complete all as specified and directed by Engineer-in-charge. Make: LOVELYCEM/ SURYACEM/ JANATHACEM / LUCKYCEM or equivalent make as approved by GE.

M&L for second class hard wood clean sawn scantling, unframed and fixed including taking down existing scantling complete all as specified and as directed by Engineer-in-Charge. WOOD: Sal/Kalasiris/Chaplash/Hollock/Bijasal

Taking down existing second class hard wood clean sawn scantling, unframed and and refixing in same location or new location in the same building complete all as specified and as directed by Engineer-in-Charge.

M&L for 20mm thick or feather edged 15mm to 20mm thick second class hard wood weather boarding, clean sawn, with 30 mm laps as in eaves board including taking down existing boarding of any type complete all as specified and directed by Engineer-in-Charge. TIMBER: - Sal/Kalasiris/Chaplash/Hollock/Bijasal

M&L preparing new wooden surfaces of any description over 10 cm width or girth and applying two coats of creosote oil complete all as specified and directed by Engineer-in-Charge.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick square/rectangular area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc., jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles laid on and including 15mm thick screed bed in cement mortar 1:6 including dismantling existing tiles and removing rubbish off the premises complete all as directed by Engr-in-charge.

M&L for coloured glazed ceramic tiles of size 300x200x7mm thick on vertical surfaces such as skirting/dado, jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles laid on and including 10mm thick rendering in cement mortar 1:4 backing coat including dismantling existing tiles and removing rubbish off the premises complete all as directed by Engineer –in-Charge.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick square/rectangular area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc., jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles laid on and including 15mm thick screed bed in cement mortar 1:6 including dismantling existing tiles and removing rubbish off the premises complete all as directed by Engr-in-charge.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick square/rectangular area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm,on vertical surfaces such as skirting, dados, raisers to steps etc., jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles laid on and including 10mm thick screed bed in cement mortar 1:4 including dismantling existing tiles and removing rubbish off the premises complete all as directed by Engr-in-charge.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick square/rectangular area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc., jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles laid on and including 15mm thick screed bed in cement mortar 1:6 including dismantling existing tiles and removing rubbish off the premises complete all as directed by Engr-in-charge. Make for Item No 18 to 22: NITCO/ SOMANY/ ASIAN / JOHNSON/KAJARIA/ORIENT BELL

M&L for 75 mm thick Plain Cement Concrete 1:4:8, type D2 (using 40mm graded stone aggregate) as in sub base and finishing even and rough to receive toping layer including demolition of existing concrete and removing rubbish off the premises complete all as specified and directed by Engineer-in-charge.

M&L for 40mm thick plain cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) as in floors laid in alternative bays and finished even and smooth using extra cement including demolition of existing flooring and removing rubbish off the premises complete all as specified and directed by Engineer-in-Charge.

M&L for 3mm thick 38mm wide inserted in position in flooring to confirm to design complete all as specified and directed by Engineer-in-Charge.

M&L 75 mm thick PCC 1:3:6, type C2 (using 40mm graded stone aggregate) in plinth protection, paths etc., laid in alternative bays finished even and smooth without using extra cement including demolition of existing concrete and removing rubbish off the premises complete all as directed by Engr-in-charge.

M&L for cement concrete chequered tiles 300 x 300 x 25 mm thick with grey cement and no pigment, set and jointed in neat cement slurry and pointed in grey cement to match the surfaces as in floors over and including 15 mm thick screed bed in cement mortar 1:6 including demolition of existing tiles and removing rubbish off the premises complete all as specified and directed. Make: NITCO/DECO/BHARAT or equivalent as approved by GE.

M&L for machine pressed precast concrete colour rubber finished interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M35 grade with grey cement and pigment laid on and including 50mm thick sand cushioning including demolition of existing tiles and removing rubbish off the premises complete all as specified and as directed by Engr-in-charge. Make: NITCO/ULTRA/EUROCON/DECO/BHARAT or equivalent as approved by GE.

Sub Total of Schedule 'A'

Schedule of Credit (Minus) Rs. 51,450.00 B/F from Ser page No. 25 NOTE: Bidder shall insert credit amount as rate Rs. 51,450.00 in Green field under Col-M. If bidder does not insert the amount the same will be deducted from total amount of Schedule 'A' and accordingly total amount of tender will be considered in deciding the lowest tender.

Sub Total of Schedule of Credit

SANJAY SAW MILL

MANOJ JINDAL

DEEP CHANDRA JOSHI

MS BRAHMA CONSTRUCTION

JAYSHREE CONCERN

HEM RAJ GURUNG

SANJAY MITTAL