Increasing capacity of distribution Transformer and other electrical work against Business plan 23-24 UNDER JURISDICTION OF E.E., EDD, CESS-I/II, CISS GOMTI, LESA, Lucknow (Package No. 153, 154, 147, 148 and 150/23-24

Amount

Safe Loading, Carriage & unloading of following Materials from Centre Store to Pit Site/J.E. Dump Store.

a- Line Material

b-TF 250 KVA

c- TF 400 KVA

d- TF 630 KVA

e- LT PVC Cabel 1x400 sq.mm.

f- LT Cable 1 Core 400 sq.mm.

g- GI Wire 10 SWG

Well type earthing of with 60 Fit Deep borring and providing GI Pipe 1.5" dia ("B" Class) and earthing must be joint by G.I. Strip of 32x5 mm thick long attached with nut & bolts and GI pipe cap. All material and labour shall be supplied the contractor.

Construction of T/F plinth of size 2x2x1.2 mtr with the help first class brick & masonary in the ratio 1:4 cement & sand coarse. Filling the structure completely per norms with RCC to 1:2:2 cement & stone grit with MS bar and MS channel for resting transformer.

Wiremess fencing of 11/0.4 KV S/S shall be made of rectangular of size as per site requirement not exceeding 3 meter fabrication 45x45x5 mm angel the frame is also have 1 no. Horizontal runner of MS flat 40x5 welded in middle to support of wire mesh. Rectangular welded type wire mess of size 50x25 made of 12 S.W.G. wire mess shall be welded all along the periphery of the frame as well as on horizontal runner to give extra strength of welding to wire mess welded on the frame. Diagonal bracing of all the frame panel will be welded with Ms flat of size 25x3mm to support as per RESPO specification & direction of E/I.

Construction of masonry/metalic type distribution pillar of size 1x1.5x2.5 mtr. with supply & fixing of fabricated 4 nos. doors (2ft.x4ft.) made of BP sheet of 18 SWG with locking arrangement, 2 Nos. Straight MS angle 50x50x6mm (1800 mm olng) 2 nos. 500 Amp, 3 Nos. 300 Amp henely Type Tailess Funse Unit, 3 Nos coper bus bar of size 1000x50x6 mm and one No. Alum busbar 1000x50x6 mm including all civil material required for work. All material shall be supplied by contractor.

Supply and fixing of Copper L-Piece for 630 KVA TF as per RESPO Norms.

Supply and fixing of Copper L-Piece for 400 KVA TF as per RESPO Norms.

Supply and fixing of Copper L-Piece for 400 sq.mm. as per RESPO Norms.

Supply and fixing of Allu. Lug For 630 KVA TF as per RESPO Norms.

Fabrication, errection & commissioning of 250 KVA T/F on Plinth with all accessories. All material except 250 KVA T/F shall be supplied by the Contractor.

Fabrication, errection & commissioning of 400 KVA T/F on Plinth with all accessories. All material except 400 KVA T/F shall be supplied by the Contractor.

Fabrication, errection & commissioning of 630 KVA T/F on Plinth with all accessories. All material except 630 KVA T/F shall be supplied by the Contractor.

Dismantling of 250 KVA T/F opening jumbers, LT cable and Other accessories of T/F including Safe loading, unloading Carriage from site to JE dump Store/Center Store.

Dismantling of 400 KVA T/F opening jumbers, LT cable and Other accessories of T/F including Safe loading, unloading Carriage from site to JE dump Store/Center Store.

Dismantling of 100 KVA T/F opening jumbers, LT cable and Other accessories of T/F including Safe loading, unloading Carriage from site to JE dump Store/Center Store.

Laying of LT Cable 1x400/1 Core 400 sq. mm as per RESPO Norms. Only cable shall be supplied by deartment.

GST Extra as per Rules

M/s CHAUHAN ELECTRICALS

M/S SURAJ ASSOCIATES