RequiredCertificate (Requested in ATC)
RequiredOEM Authorization Certificate
RequiredOEM Annual Turnover Bid to RA enabled No Mobile Toilet ( 1 pieces ) ( Under PAC ) Make jdtm Model jaydurgetrolleymanufacturerssixseatermobiletoil etvan Technical Specifications * As per GeM Category Specification Specification Specification Name Values Bid Requirement (Allowed Values) GENERIC Mode of Supply Assembled Ready To Use Assembled Ready To Use Number of Compartments 6-seater mobile toilet 6-seater mobile toilet 1/7 Type of WC Indian with steel base Indian with steel base
RequiredEuropean with steel base Number of WC 6 6 Number of Bathrooms 0 0 Number of Urinals 0 0 Water facility By mean of overhead tank(Capacity 500Ltrs) By mean of overhead tank(Capacity 500Ltrs) Wash basin 2 Nos. outside the Unit with common facility 2 Nos. outside the Unit with common facility Sewage facility Sludge tank (capacity-600ltrs) with 100mm outlet facility through butterfly valve and hose pipe(For 6-seater) Sludge tank (capacity-600ltrs) with 100mm outlet facility through butterfly valve and hose pipe(For 6-seater) ventilation Full size cross ventilation Full size cross ventilation Top(roof) shape Slanting/tapper * Projection of Roof 50mm projection from front and 25mm projection on other sides(slanting shape) 50mm projection from front and 25mm projection on other sides(slanting shape) Installation and commissioning To be done by Consignee himself To be done by Consignee himself Plumbing and Sanitation fitting connections To be done by Consignee himself To be done by Consignee himself Electrical connections To be done by Consignee himself To be done by Consignee himself Waste extraction fitting To be done by Consignee himself To be done by Consignee himself Civil foundation No foundation required No foundation required TRAILER STRUCTURAL MATERIAL Trailer frame(Chassis) material with support material including pathway 100mm X 50mm C- channel MS - 75mm X 37.5mm C-channel MS - 40mm X 40mm X 5mm (thick) MS angle - 40mm X 40mm X 5mm (thick) MS Tee - 35mm X 35mm X 5mm (thick) MS angle and 25mm X 25mm X 3mm (thick) MS angle for 4-seater/6 -seater/8-seater and 10-seater 100mm X 50mm C- channel MS - 75mm X 37.5mm C-channel MS - 40mm X 40mm X 5mm (thick) MS angle - 40mm X 40mm X 5mm (thick) MS Tee - 35mm X 35mm X 5mm (thick) MS angle and 25mm X 25mm X 3mm (thick) MS angle for 4-seater/6 -seater/8-seater and 10-seater Railing material 38mm X 25mm MS pipe of thickness 38mm X 25mm MS pipe of thickness 2/7 1.2-1.5mm (for 4-seater
Required6-seater
Required8-seater & 10-seater) 1.2-1.5mm (for 4-seater
Required6-seater
Required8-seater & 10-seater) Trailer understructure Spring leaves 710mm with 9 leaves for 4-seater and 6-seater Spring leaves 710mm with 9 leaves for 4-seater and 6-seater Turn table/rotor 100mm X 50mm MS channel and 10mm thick MS plate plus spring ply 40mm X 5mm * Pathway passage/slide platform Sliding type made of 35 X 35 X 5mm angle iron with cross support of 25mm flat iron and top of 1.6mm aluminum chequered sheet * Stairs frame material Made of MS pipe frame of 25 X 25 X 1.6mm with steps of aluminum chequered sheet(folding type) * Stairs size 710mm X 230mm having 4-step for 1420mm Height and 735mm width stair * Locking Locking pins to be provided for lock the platform * Tow bar Made of 100 X 50 mm channel section with easy detachable and connect with turn table Made of 100 X 50 mm channel section with easy detachable and connect with turn table FRAME MATERIAL Side panel frame material 35mm X 35mm X 5mm(thick)
Required25mm X 25mm X 3mm(thick) MS angle (for 4-seater 6-seater/8-seater & 10-seater) 35mm X 35mm X 5mm(thick)
Required25mm X 25mm X 3mm(thick) MS angle (for 4-seater 6-seater/8-seater & 10-seater) Top(roof) frame material 40mm X 40mm X 5mm(thick)
Required35mm X 35mm X 5mm(thick)
Required25mm X 25mm X 3mm(thick) MS angle 40mm X 40mm X 5mm(thick)
Required35mm X 35mm X 5mm(thick)
Required25mm X 25mm X 3mm(thick) MS angle Top(roof) support frame structure 40mm X 5mm(thick)
Required35mm X 5mm(thick)
Required25mm X 3mm(thick) MS flat 40mm X 5mm(thick)
Required35mm X 5mm(thick)
Required25mm X 3mm(thick) MS flat Partition frame material 35mm X 35mm X 5mm(thick)
Required25mm X 25 mm X 3mm(thick) MS 35mm X 35mm X 5mm(thick)
Required25mm X 25 mm X 3mm(thick) MS 3/7 angle angle Ventilation frame material 25mm X 25mm X 3mm(thick) flat MS * Door frame material 50mm X 25mm of 14-16gauge rectangular MS hollow pipe 50mm X 25mm of 14-16gauge rectangular MS hollow pipe Support material for Door panel fixing No support material No support material Door hinges(two numbers) 75mm size with 1.2-1.5mm thickness MS * Tank holder frame material 25mm X 3mm (thick) MS flat 25mm X 3mm (thick) MS flat PANEL MATERIAL Side panel material 5mm thick ply core sandwich with 1mm thick FRP from both sides(5+1+1mm) 5mm thick ply core sandwich with 1mm thick FRP from both sides(5+1+1mm) Top(Roof) panel material 2mm thick FRP translucent sheet 2mm thick FRP translucent sheet Door panel material Single layer 3mm thick FRP Single layer 3mm thick FRP partition panel material Single layer 3mm thick FRP Single layer 3mm thick FRP Floor material 5mm thick FRP material 5mm thick FRP material DIMENSION Size of each cubical(LXWXH) ± 25mm 890mm X 840mm X 1980mm 890mm X 840mm X 1980mm Door size(WxH) ± 20mm 585mm x 1830mm * Ventilation size(WXH) ± 10mm 838mm X 150mm(above door) plus 838mm X 75mm(opposite side) * Partition height ± 20mm 1830mm * Single pan size ± 10mm As per buyer's choice * Overall Length(mm) ± 25mm 3955mm for 6-seater 3955mm for 6-seater Overall Width including pathway(mm) ± 25mm 2700mm for 4/6/8 and 10-seater 2700mm for 4/6/8 and 10-seater Total height ± 25mm 3040mm * SEWAGE SUCTION UNIT Capacity of sewage N.A * 4/7 suction unit Length of sewage suction unit ± 25mm N.A * Width of sewage suction unit ± 15mm N.A * Capsule Diameter N.A * Capsule Thickness N.A * Chassis size of sewage suction unit N.A * Suction pump N.A * Valve for sewage suction unit N.A * Axle for sewage suction unit N.A * Tyres for sewage suction unit N.A * Spring leaves for sewage suction unit N.A * MISC Door locking bolts Size 100mm of MS * Tower bolt locking Tower bolt of MS size 75mm * Overhead Tank material made of three layer HDPE sheet * Wash basin material made of SS 304 * WC material made of SS 304 * Towel rail/ring made of SS * Cloth hook NO cloth hook * P-trap material made of PVC(75mm) * Footrest(WC) material made of SS 304 integrated with Indian WC and floor made of SS 304 integrated with Indian WC and floor Sewage tank material Sludge tank made of FRP 4mm(for 4-seater/6 -seater/8-seater & 10-seater) * Mirror size 380mm X 255mm 380mm X 255mm Electric provision By mean of connection from external supply * Sewage provision Connected to septic tank * Level indicator provision N.A * Water supply connection UPVC pipe connection with all toilet * 5/7 interconnecting Seat cistern fitting NO cistern NO cistern Soap stand SS 304 made Size:125 X 75 mm * Tap material Chrome plated * Base floor surface To be suitably slanted towards WC for proper drainage(for Indian WC) * Trailer Movement facility Two axle of 50mm X 50mm X 1828mm with 4-tyres of size 6.00 X 16 with hubs and bearings for 4-seater and 6-seater Two axle of 50mm X 50mm X 1828mm with 4-tyres of size 6.00 X 16 with hubs and bearings for 4-seater and 6-seater Provision for vent pipe From sludge/Septic tank * Water mug(standard size) Plastic made * Electric point 1 No. electric point to be provided in all toilet 2 watt LED * Stand provision to keep mobile toilet in static position N.A * COLOUR & FINISH Colour of cabin As per buyer's choice * Finish With Primer and Paint * CERTIFICATION Test reports to be furnished to buyer's on demand YES * OEM of offered product is ISO 9001:2015 certified YES * WARRANTY Warranty period in number of years 1 1 * Specifications highlighted in bold are the Golden Parameters. * Bidders may note that In respect of non-golden Parameters
Requiredthe specifications 'Values' chosen by Buyer will generally be preferred over 'Bid requirement ( allowed Values) by the Buyer.
