PROVISION OF CERTAIN MINOR WORKS AT AF STN SONEGAON, NAGPUR.

Demolition of RCC of any description and in any position not otherwise specially provided for (including using machinery to cut the joint in smooth pattern /finish) complete all as specified and as directed.

Supply fabrication and erection of suitable tensile fabric structure as per the concept which shall be cladded with PVC polyster fabric of 902 or Eqv Make 900 GSM Type -II . Of size 4.40Mtr X 7.24 Mtr with in gazebo conical pattern with min Ht 1.25 Mtr at the Centre with centre fixing arrangement for holding with aesthetic look. The surface area of fabric will be accounted including the cut pieces. The tensile fabric structure might be having 10 years’ life guarantee. Supply and installation of Tensile strength using the following materials: - - Tensile fabric 900 GSM Type II of Ferrari or Equivalent. - Apollo ISI marked MS Pipes Grade 310 with specific dia, MS Foundation plate and bolts shall be used. MS membrane plate, Aluminium Strip, GI wire Rope, S. S 8mm/10mm nuts, 12/16mm I bolt shall be used. One coat of Epoxy primer (Red oxide). 02 Coats of Epoxy Paint.

Structure: - Foundation Plate 300X300X12 MM, 04 Nos Square Posts of SHS @ 132 X 132 X mm of Height 3.00 Mtr, Bottom Chord and SHS @ 132X 132X3 mm Thick Top Chord cum bracing and centre holding with connected accessories CHS @75OD X3 mm thick and MS plates as required on laps and joints Foundation: - Depth of Fdn = 1500 mm + 75mm PCC 1:4:8 LXB= 1200X1200 XD300 mm. Footing Reinforcement 12# @150C/C both way. 4 NOs Bolts (J Type) 450mm long Dia-16 mm Concrete in foundation 1:1.5:3 type- B2 with recommended plasticizer Column: 400X400 mm with 8Nos 12# bars with stirrups of 8# @ 150c/c and +1 Link Complete all as specified and directed by Engr-in-Charge.

Make: - (Fabric- Ferrari/S.R. F / Heytex or Equivalent) Note: - 1. Erection and fixing of structure as per shape without cutting only bending the required shape/design at any height will include hydra or equivalent type of machine and will be provided by contractor. 2. Technical specification and details of structure is as per drawing given of manufacturer/ company. 3. Mode of measurement is on the basis of plan area of the structure and rate shall be considered Per Sqm of plan area. including conical shape having fabric and structure. 4. The design and drawing shall be vetted from M Tech strength inclusive quoted cost deemed in tender. 5.Any changes in structural design and drawing during vetting. Manufacturer agency will incorporate by the contractor without any financial effects. No charge will be pay by the department for the same Note: - Tensile fabric and shed will be guaranteed for 10 Years for any kind of wear and tear due to any effect of wind or any other reasons.

Demolition of cement concrete in ground floor n. exc 15cm thickness (below or above ground level) and removing the demolished material and debris outside MD land complete all as specified and as directed.

M & L Providing and laying 60mm thick factory made glossy finish approved shape cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and as directed.

M & L 75mm thick cement concrete type D-2, 1:4:8 (40mm graded aggregate) as in sub base of floors complete all as specified and directed.

M & L for PCC (1:2:4) type B-1, using 20mm graded stone aggregates, as in kerb or side of path and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed.

Supply fabrication and erection of suitable tensile fabric structure as per the concept which shall be cladded with PVC polyster fabric of 902 or Eqv Make 900 GSM Type -II . Of size 4.40Mtr X 7.24 Mtr with in gazebo conical pattern with min Ht 1.25 Mtr at the Centre with centre fixing arrangement for holding with aesthetic look. The surface area of fabric will be accounted including the cut pieces. The tensile fabric structure might be having 10 years’ life guarantee. Supply and installation of Tensile strength using the following materials: - - Tensile fabric 900 GSM Type II of Ferrari or Equivalent. - Apollo ISI marked MS Pipes Grade 310 with specific dia, MS Foundation plate and bolts shall be used. MS membrane plate, Aluminium Strip, GI wire Rope, S. S 8mm/10mm nuts, 12/16mm I bolt shall be used. One coat of Epoxy primer (Red oxide). 02 Coats of Epoxy Paint.

Structure: - Foundation Plate 300X300X12 MM, 04 Nos Square Posts of SHS @ 132 X 132 X mm of Height 3.00 Mtr, Bottom Chord and SHS @ 132X 132X3 mm Thick Top Chord cum bracing and centre holding with connected accessories CHS @75OD X3 mm thick and MS plates as required on laps and joints Foundation: - Depth of Fdn = 1500 mm + 75mm PCC 1:4:8 LXB= 1200X1200 XD300 mm. Footing Reinforcement 12# @150C/C both way. 4 NOs Bolts (J Type) 450mm long Dia-16 mm Concrete in foundation 1:1.5:3 type- B2 with recommended plasticizer Column: 400X400 mm with 8Nos 12# bars with stirrups of 8# @ 150c/c and +1 Link Complete all as specified and directed by Engr-in-Charge.

Make: - (Fabric- Ferrari/S.R. F / Heytex or Equivalent) Note: - 1. Erection and fixing of structure as per shape without cutting only bending the required shape/design at any height will include hydra or equivalent type of machine and will be provided by contractor. 2. Technical specification and details of structure is as per drawing given of manufacturer/ company. 3. Mode of measurement is on the basis of plan area of the structure and rate shall be considered Per Sqm of plan area. including conical shape having fabric and structure. 4. The design and drawing shall be vetted from M Tech strength inclusive quoted cost deemed in tender. 5.Any changes in structural design and drawing during vetting. Manufacturer agency will incorporate by the contractor without any financial effects. No charge will be pay by the department for the same Note: - Tensile fabric and shed will be guaranteed for 10 Years for any kind of wear and tear due to any effect of wind or any other reasons.

Supply and fixing in replacement anti suicidal down rod length 600mm white, MS zinc plated 19mm outer dia 1.8mm +/- 0.05mm thick spring set grade 3 carbon steel zinc plated MSME tested for performance test and opening at impact load 22 kgf + and spring hidden in the pipe will expand to amount 1 mtr and clearance of ceiling fan complete all as specified and as directed. Make: - GOLD LIFE or Equivalent.

Supply, Installation, commissioning and testing of Pressure booster pump of capacity 1 HP, single phase, 240 Volt and connect to outlet of overhead tank to increase the pressure in pipelines and ideal for 4 bathrooms, flow rate 50 ltr per minute with pressure switch/controller for automatic switch ON/OFF complete all as specified and directed by Engr-in-Charge. Make: - Havells/ Kirlosker/ Crompton

M & L for colour galvanised coated iron sheet of size 2.5’x2.5’x2.5’ with a thickness of 0.5mm along with suitable size of clamps/nut bolts for fixing on roof complete all as specified and directed.

Supply and laying of 25 mm bore GI tubing with all fittings including cutting for branch line and making threads complete fixed to wall/flooring /ceiling etc or laid in trenches complete all as specified and directed.

S & F Gun metal globe or gate valves with iron wheel head screwed both ends for GI pipe complete all as specified and as directed.