Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹20.3 LAccepted-AOC 7TH MILE UPPER SHILLONG P O NONGLYER SHILLONG MEGHALAYA | EAST KHASI HILLS | MEGHALAYA | 793009 | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹21.7 L+₹1.3 L (6.29%)Rejected-AOC | L2 | Rejected-AOC Other than lowest bidder | |
| 3 | L3₹24.0 L+₹3.6 L (17.6%)Rejected-AOC | L3 | Rejected-AOC Other than lowest bidder |
Tender Value
Refer Docs
EMD Value
₹44,000
Closing Date
30 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE (AF) Chandigarh
HQ CWE (AF) Chandigarh PIN-160003
REPAIR/RECARPETING OF ROAD AND CONNECTED WORKS AT AF STN AMRITSAR
2023_MES_599677_1
CWE/AF CHD/ASR/T-05/2023-24
Open Tender
Civil Works
Item Rate
180 days
Amritsar
As per NIT
7 documents required · 7 mandatory
₹500
AGE(I)(AF) Amritsar
₹44,000
Yes
26 Jul 2023
30 May 2023
7 Jul 2023
30 May 2023
30 Jun 2023
17 Jun 2023
Amount
Material and labour for repair to pot holes, depth exceeding 30mm and area not exceeding 1.0 Sqm each, including sweeping free from dust and mud or water, scoring sunken surfaces of road, cutting around edges to at least 25mm in depth, making good by applying paving bitumen (VG-10) @ 5kg per ten sqm, putting in premixed bituminous macadum, well rammed and sealed with binder 9.8Kg/10 Sqm blinded with 0.09 Cum of stone chipping 6.3mm size and again well rammed / rolled to uniform smooth surface, complete all as specified and directed.
Material and labour for preparing black top surfaces by brushing with wire brushes for removing caked mud etc., sweeping with brooms and finally fanning the cleaned surfaces with air compressor to remove all loose dust & dirt etc. including draining off water if any from pot holes, complete all as specified and directed.
Material and labour for applying evenly a priming/tack coat with paving bitumen (VG-10 grade) @5Kg/10Sqm with mechanical sprayer on black top surfaces, complete all as specified and directed.
Material and labour for premixed semi dense asphaltic concrete 30 mm thick consolidated thickness, using combined graded aggregate i.e. crushed stone coarse aggregate, fine aggregate (sand) & filler (inherent filler/OPC 43 grade) of physical properties as specified (refer SSR Part-I of 2009), pre-heated, mixed with 4.5% to 5.5% binder content by weight of total mix using VG-30 grade bitumen, laid with mechanical paver, rolled & compacted to a uniform smooth surface with 8 to 10 tonne power road roller, complete all as specified and directed. Notes:- (i) Thickness of semi dense asphaltic concrete and quantities of materials as mentioned in particular specifications/SSR are the minimum. The quoted rate shall also be deemed to include for provision of more materials in comparison to those mentioned/specified in the item, if required, to achieve the required level, gradient, camber and shape all as directed by the GE. (ii) Hot mix plant of adequate capacity shall be used for heating and mixing crushed stone coarse aggregate, fine aggregate and binder (bitumen). Semi dense asphaltic concrete shall be laid in single layer with self propelled mechanical paver all as directed by the GE. (iii) Contractor’s quoted rates shall be deemed to include all these aspects.
Material and labour for painting 2mm thick with thermoplast fluorescent paint of colour white or golden yellow or any other shade conforming to BS standard 3262 with 20% glass beads (inter mixed) applied hot with automatic (commercial) machine drive in stripes after preparation of surfaces as per manufacturer’s instructions & according to the specifications laid down by IRC & MOST (Ministry Of Surface Transport)- Specifications 2001 (4th revision), making lines, broken lines/dashes, arrows etc. on roads and other like surfaces exceeding 10 cm but not exceeding 20 cm in width or girth, complete all as specified and directed.
Supply and fixing in repairs bi-directional reflective type road studs (Cat eyes) with 6 LEDs, colour as approved by Engineer-in-Charge, made of plastic body moulded from HIPS (Hi-impact polystrene) or ABS plastic conforming to ASTMD type 4280, type H and complying to specifications of categroy A and reflective panels consisting of number of lenses containing single or dual prismatic cubes capable of providing total internal reflection of light entering the lens face, with height not exceeding 20 mm and length and width 100 mm (not exceeding surface shall be 130 mm) and the area of each retro-reflecting surface shall be 13 Sqcm on each face and shall preferably be 35 +_ 5 degree slope to base to face, fixed as per manufacture's instructions, complete all as specified and as directed. Make:- 3M/TATA BP Solar/SA Traffic Safty, Kolkata/BONS Loght Pvt Ltd, Ahmedabad/ASIAN Controls, Mumbai.
Supply and fixing in repairs raised reflective pavement markers Solar Road blinkers studs (Cat eyes) 6 pcs high bright LEDs made of Di cast Aluminium & PC moulded from HIPS (Hi- impact polystrene) or ABS plastic conforming to ASTM D type 4280 type H and complying to specifications of category A and reflective panels consisting of number of lenses containing single or dual internal reflection of light intensity 8000 mcd, the lens face, with height not exceeding 20mm and dimension H 80mm x L 125mm x w 127mm and shall preferably be 35 +_ 5 degree slope base to face, fixed as per manufactures instructions complete all as specified and as directed. Make : 3M/TATA BP SOLAR/ SA TRAFFIC SAFETY, Kolkata/BONS LIGHT PVT LTD, Ahmedabad/ASIAN CONTROLS, Mumbai.
Supply and fixing in repair ABS speed breaker/Rubber Rumbler heavy duty of height 75 mm and of size 750 mm x 250 mm each in two colours (Black & Yellow), fixed alternately with reflectors on either side complete fixed with epoxy and bolts 6mm dia, 75 mm long fasteners by drilling as per manufacturer's instruction complete all as specified and as directed.Make :- Model No DA 1005of Dark Eye or equivalent in makes Oscar/Avery Dennison Alexis/Sharp Eyez/3M TATA.
Demolition of cement concrete (un-reinforced) above ground floor and removal of debris outside MoD land, complete all as specified and directed.
Material and labour for 100 mm thick plain cement concrete 1:4:8 type D-2 using 40 mm graded crushed stone aggregate as in sub base of floors, complete all as specified and directed.
Material and labour for Factory Made Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickess M-35 grade with grey cement and pigment laid over and including 25 MM thick sand filling and joints filled with fine sand complete all as specified and directed.
Material and labour for Factory Made Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickess M-40 grade with grey cement and pigment laid over and including 25 mm thick sand filling and joints filled with fine sand complete all as specified and directed.
Material and Labour for Precast Chequered cement concrete tiles 20 cm x 20 cm x 25 mm thick, with grey cement and pigment (coloured), set and jointed using neat cement slurry and pointed in coloured cement or white cement mixed with pigment to match the surface, laid over and including 20 mm thick screed bed or bedding layer in CM (1:6), complete all as specified and directed.
Material and Labour for vitrified Precast Chequered cement concrete tiles 30 cm x 30 cm x 8 to 9 mm thick, with grey cement and pigment (colour as approved), set and jointed using neat cement slurry and pointed in coloured cement or white cement mixed with pigment to match the surface, laid over and including 15 mm thick screed bed or bedding layer in CM (1:6) and including dismantling of old U/S tiles complete all as specified and directed.
Material and Labour for PCC (1:2:4) type B-1, using 20 mm graded crushed stone aggregates, as in coping, roof kerb, mud stops, kneelers, apex stones, bed plates,benching, water trough etc including weathering, slightly rounded or chamfered angle and throating, including necessary form work, complete all as specified and directed.
Demolition of brick masonry work built in cement mortar/old PCC Kerb stone including all quoins, arches, pillars, staging etc. and removal of rubbish outside MOD land, complete all as specified and directed.
Material and Labour for factory made, 100 mm thick precast kerb stones in PCC (1:2:4) type B-1, using 20 mm graded crushed stone aggregates, compressed and hydraulically pressed, tapered/curved on one edge at top, laid on edge over 100 mm thick bedding layer in CM 1:6, set in cement mortar 1:4 and pointed in CM 1:4, complete all as specified and directed.
Material and labour for Applying two coats of road marking paint over a coat of primer on newly laid kerb stone surface in blue & white or yellow & black shade complete all as specified and directed by Engineer-in-charge.
Exacavation in post holes (or similar holes) each n.exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complete all as specified and directed.
Material and Labour for providing and fixing stainless steel (Grade-316) hollow tubes, channels, plates etc., including welding, grinding, buffings, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the section with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc. of required size as in sign board, complete all as specified and directed.
Supply and fixing 3 mm thick ACP sheet board of size not less than 0.25 sqm in high quality colour of sheet as approved by Engineer-in-Charge, complete all as specified and directed.
Supply and fixing Alphabet letters (for out door) of Acrylic Retro reflecting tape, height of letter not less than 20 cm and colour as approved by Engineer-in-Charge, complete all as specified and directed.
Supply and fixing in repair solar delinator twin reflector, made out of polycarbonate and toughened aluminium alloy body and MS pipe of 51 mm dia and mounted on oval shaped metal plate of dimensions 302 mmx167 mm complete all as specified and as directed. Make:- Kiwalite of Kiwa chemical industry Co Ltd/Future vista 3M or Aktion safty or equivalent as approved.
Supply and fixing in repair delinator DA-952 GP of size 700x100x50 mm ABS round body fitted with 100 mm dia highly reflective, UV stablised in colour as approved by Engineer-in-Charge, mounted on MS pipe 50 mm dia, provided with anti rust & anti theft arrangement, Including PCC foundation of size 150x150x300 mm with PCC 1:3:6 type C1 including necessary earthwork excavation in any soil, removal and disposal of spoil, complete all as specified and directed by Engineer-in-Charge. Make:- Dark eye or equivalent model from TATA BP/Birla 3M.
Supply and fixing polycorbonate traffic safety convex mirror of 800 mm dia fixed over post of 60 mm dia upto a height of 1.5 metre, made of MS pipe painted in black, having 130 degrees viewing, including necessary earthwork excavation and PCC 1:2:4 of size 450mmx450mmx600mm, complete all as specified and directed. Make- Green Lites or equivalent as approved by GE
Note: The Total amount shall subject to adjustment of credit of Rs. 10950.00 for old Materials as per Schedule of Credit
TARSAM LAL SAINI CONTRACTOR
M/s AKG Engineers & Contractors
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .