Development of Townsquare in porvorim Goa under the special Assistance to States for Capital Investment SASCI Scheme

Amount

CIVIL WORKS

Clearing grass and removal of rubbish upto a distance of 50 m outside the periphery of the area

a) Felling trees of girth(measured at a height of 1. m. Above ground level) inluding cutting of trunks and branches removing the roots stacking the serviceable material and disposal of unserviceable material for all leads : a. Beyond 30 cm and upto 60 cm girth

b) Felling trees of girth(measured at a height of 1. m. Above ground level) inluding cutting of trunks and branches removing the roots stacking the serviceable material and disposal of unserviceable material for all leads : Beyond 60 cm and upto 120 cm girth

c) Felling trees of girth(measured at a height of 1. m. Above ground level) inluding cutting of trunks and branches removing the roots stacking the serviceable material and disposal of unserviceable material for all leads : Beyond 120 cm and upto 240 cm girth

Earth work in excavation over areas of all type of strata comprising of any type of material such as soil ,silt,clay, sand, gravel, murum of all varieties, shingles, pebbles, all type of congolmerates,latrite rock,soft rock,ordinary rock, disintegrated rock,fissured/shattered rock, decomposed rock, weathered rock and all such material either in full or part as the case may be adopting any method/ methods as may be convenient or permitted (blasting prohibited) including chiselling ,wedging,etc., in all conditions such as dry , moist, foul, saturated, submerged, etc., as directed by the Engineer etc., all complete including dressing of side ramming bottom, all leads and lifts, getting out excavated soil & stacking as directed , pumping and bailing out water, barricading,danger lighting, guarding as directed.

Earthwork in excavation in trenches for all leads & lifts in all type of strata comprising of any type of materials either in full or part as the case may be adopting any method/methods as may be convenient as permitted excluding blasting in all conditions such as dry, moist, foul, saturated, submerged, etc,. including dressing of sides, planking & strutting, timbering ,ramming of bottom ,pumping and bailing out water ,barricading danger lighting guarding, getting out excavated soil & stacking as directed by Engineer for all leads & lifts etc. complete

Refilling the pipeline/foundation trenches plinth sides, foundation etc. with available excavated earth in layers not exceeding 20 cm depth consolidating each layer ramming and watering lead upto 50 M and all lifts and disposal of surplus earth as directed by Engineer.

Supplying and filling Moorum in plinth under floors, trenches including watering ramming consolidating, dressing, complete.

Supplying and filling fine Sand in plinth under floors, trenches including watering ramming consolidating, dressing, complete.

Rubble packing with hard laterite stone under floors including watering ramming and consolidating etc. in pipeline trenches and other foundations complete.

Brick work using fly ash bricks in cement mortar 1:5 (1 cement : 5 coarse sand) with bricks of class designation 40 kg / cm2 in foundation and plinth. A. 230 x 110 x 80 mm

Pre-cast cement concrete solid blocks masonry of compressive strength 70 kg / cm2 in cement mortar 1:4 (1 cement : 4 corase sand ) in partition walls size of blocks (30 x 20 x 10)

Pre-cast cement concrete solid block masonry of compressive strength 70 kg / cm2 in cement mortar 1:4 (1 cement : 4 corase sand ) in foundation and plinth size of blocks (30 x 20 x 15) .Extra for precast concrete block masonary in all sizes in superstructure from floor one level upto floor V level

Pre-cast cement concrete solid block masonry of compressive strength 70 kg / cm2 in cement mortar 1:4 (1 cement : 4 corase sand ) in foundation and plinth size of blocks (30 x 23 x 15) .Extra for precast concrete block masonary in all sizes in superstructure from floor one level upto floor V level

Exposed decorative laterite masonry using Patradevi stone of size as specified and laid as directed by architect in cement mortar 1:4 (1 cement : 4 coarse sand)

Providing & laying damp proof coarse 25 mm thick with cement concrete with 1: 2:4 (1 cement: 2coarse sand: 4 graded granitic or basaltic stone aggrt. 10 mm. nominal size)

Providing and laying cement concrete 1:2:4 (1 cement : 2 sand : 4 aggregate 10 mm and down side) for flooring, bedding as per drawings and as directed by Engineer below area of flooring as specified.

Providing & laying cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded granitic or basaltic stone aggregate 20 mm. nominal size) excluding cost of centering, shuttering and finishing in: All work up to Plinth level

Providing and laying up to floor 5 level cement concrete 1 : 2 : 4 ( 1 Cement : 2 coarse sand : 4 graded granitic or basaltic stone aggregate 20 mm nominal size) including smooth finishing to exposed surfaces ,cement mortar 1:3 ( 1 cement : 3 fine sand ) including centering and shuttering etc. for string courses ,coping ,bed plate,anchor block,plain window sills and the like.

Providing and laying in position ready mixed concrete (RMC) with usage of Ordinary Portland Cement manufactured in fully automatic batching plant and transported to site of work in transit mixer for a lead upto 10kms having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C., from the transit mixer to the site of laying, excluding the cost of centering, shuttering, finishing and reinforcement including the cost of admixtures in recommended porportions as per IS : 9103 to accelerate/retard setting of concrete, improve workability without imparing strength and durability as per the directions of the engineer-in-charge. All works upto floor V level v. M-30 Grade of concrete

Providing and laying in position ready mixed concrete (RMC) with usage of Ordinary Portland Cement manufactured in fully automatic batching plant and transported to site of work in transit mixer for a lead upto 10kms having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C., from the transit mixer to the site of laying, excluding the cost of centering, shuttering, finishing and reinforcement including the cost of admixtures in recommended porportions as per IS : 9103 to accelerate/retard setting of concrete, improve workability without imparing strength and durability as per the directions of the engineer-in-charge. All works upto floor V level . vi. M-35 Grade of concrete

Centering and shuttering including strutting, propping, & removal of form for a) Foundation, footings, bases of columns

Centering and shuttering including strutting, propping, & removal of form for b) Vertical surfaces such as retaining walls, return walls, Partitions, walls (any thickness) including attached Pilasters, Buttresses, Plinth and string courses, Fillets and the like

Centering and shuttering including strutting, propping, & removal of form for c) Columns, Piers, Pillars, Abutments, Posts and struts (square rectangle polygon in plan)

Centering and shuttering including strutting, propping, & removal of form for d) Sides and Soffits of beams, Beam Haunchings, Cantilever, Girders, Bressumers and Lintels plinth beams not exceeding 1m in depth

Centering and shuttering including strutting, propping, & removal of form for e) Staircases (except spiral staircases) excluding landing.

Centering and shuttering including strutting, propping, & removal of form for f) Suspended floors, roofs, landings, shelves & their supports

Centering & shuttering including Strutting, Propping & removal of forms for sloping or battering surface (slabs, beams, louvers, etc) including folded plates Where inclination to the horizontal does not exceed 30° requiring shuttering on the underside only

Providing TMT steel reinforcement bars of (SAIL, TATA. VIZAG, JSW Steel Ltd.) ) (Confirming to IS 1786 of 1986) for RCC work (conforming to I.S. 1786 of 1986) including bending, binding & placing in position in all the floors along with the factory made precast concrete cover blocks of specified sizes whose compressive strength is not less than that of surrounding concrete in the structural member.

Extra to be added for additional height in centering, shuttering where ever required with adequate bracing, propping etc. including cost of de- shuttering and de-centering at all levels, over a height of 3.5m, for every additional height of 1m or part thereof. (Plan area to be measured) Suspended floors, roofs, landings, beams and balconies (plan area to be measured)

Applying a coat of hot bitumen (maxphalt 80/100 or equivalent) using 1.5 kg/sq.m. on damp proof course after cleaning the surface with brushes and finally with a piece of cloth light soaked in bitumen

Supply, assembly, installation and profiling of all post tensioning tendons includings all hardware, stressing of all tendons with equipments and skilled manpower, cement grouting of all tendons with equipments and skilled manpower, designing of post tensioned slab and beams as per IS : 1343 for bonded system as per layout issued by Consultants, getting design approved from Consultant, preparation of as built drawings for PT slabs and beams at all levels and lifts. Contractor should quote the rate considering HDPE (High Density Polyethylene) for sheathing material, Silica Grout to be used as a grouting material (only Cement - additive Grout), future prestressing provision & stressing ends to be protected.

Providing and fixing in position three tracks three shutter Aluminium sliding windows with two numbers of glass shutters and one number of stainless steel 304 mosquito net jali shutter sliding window with pure polyster powder of thickness 75- 80 microns. with window frame bottom track section 92 x 31.75 x 1.30 mm at weight 1.070 kg/Rmt. Top and side track section 92 x 31.75 x 1.30 mm at weight 0.933 kg/Rmt. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/Rmt. and handle and top section 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. as per detailed drawings and as directed by Engineer in charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter,good quality hardware and accessories like GI screws,Virgin PVC ,gaskets, Imported rollers , Concealed locks, silicon sealant on the periphery, etc complete including 6 mm thick plain glass of approved make & shade, with all required screws and nuts etc, complete.

Providing and fixing in position two tracks , two numbers of glass shutters Aluminium sliding window with pure ployster powder of thickness 75-80 microns with rectangular pipe having overall dimension 63.50 x 38.10 x 1.02 mm at weight 0.547 kg/Rmt. and window frame bottom track section 61.85 x 31.75 x 1.20 mm at weight 0.695 kg/Rmt. Top and side track section 61.85 x 31.75 x 1.30 mm at weight 0.659 kg/Rmt. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/Rmt. And handle section 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. and top section 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. As per detailed drawings and as directed by Engineer in charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter,good quality hardware and accessories like GI screws,Virgin PVC ,gaskets, Imported rollers , Concealed locks, silicon sealant on the periphery, etc complete including 6 mm thick plain glass with all required screws and nuts etc, complete.

Providing and fixing pure ployster powder of thickness 75-80 microns aluminum ventilators with aluminium frames 80 x 38 mm x 1.22 mm box type (including frame and shutter ) with three partitions using 6mm thk frosted glass in one partition, Exhaust opening in one partition & 6 mm thk glass louvers in one partition with using weight and size of section not less then as specified or as shown in drawing including sub frame ( wherever specified ) ,locking arrangement,silicon sealant ,EPDM gaskets, including all aluminum fixture and fittings etc. complete . Rectangular tube @0.478kg/m

Supply and installation of Aluminium Louvers ventilator. The frame should be made of Aluminium tubes of size 100x50X1.50 mm thk and 50X25x1.50 mm thk C channels. Aluminium Z shaped louvers of 100mm should be fixed to the supporting frame with aluminium cleats, GI screws, etc complete. The whole assembly is powder coated with pure polyester paint. (MS framing to be paid separately).

Providing and laying of aluminium fixed with 65mm x 38mm tubular frame with 6mm thick glass sections are powder coated with pure ployster powder of thickness 75-80 microns with approved standard accessories. The glass would be fixed with taper clips with EPDM beading

Providing and fixing 6 mm thick toughened glass of approved make & shade with required aluminium frame & sections with pure polyster powder of thickness 75-80 microns, aluminium fixtures with all required screws and nuts etc, complete with approved standard accessories as per tender drawing. The glass would be fixed with taper clips with EPDM beading,side gap shall be filled with silicon sealent, with required size opening etc. All works complete as per the drawing, specification satisfying LEED criteria and direction of the Engineer.

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) (Square Hollow Section (SHS) IS4923 /Rectangular Hollow Section (RHS) IS4923/ Circular Hollow Section (CHS) IS1161 closed Structural Steel of approved make (Min Yeild Stress 310 Mpa)) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.

Steel work in single sections (SAIL, TATA. VIZAG & using electrodes of Ador or ES4B or Deh Secheron make only) including cutting, hoisting fixing in position and applying a priming coat of red lead paint. A) In R.S. joists, channels, angles, tees

Supplying and fixing rolling shutters of approved make, made of 80 x 1.25 mm M.S. laths interlocked together through their entire length and jointed together at the end by end locks mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete including the cost of providing and fixing necessary 27.5cm long wire springs grade No.2 and M.S. top cover of 1.25mm thick for folling shutterstop cover and spring.

Providing and fixing 27.5cm long wire spring grade No.2 for rolling shutters.

Providing and fixing top cover for rolling shutters

Providing and fixing Ball bearings for rolling shutters

Providing and fixing pre-fabricated Double leaf compound gate with outer frame 120 X60 mm Box section with 16mm bright square bars scroll of 16 X 8 mm flat with aldrop tower – built , cover plate and bearing including providing 450 mm height 300 mm width motifs of M S plate 4 mm thick and locking arrangement, pintals and hold fast embedded in cement concrete 1:2:4 (1 cement: 2 coarse sand : 4 granitic or basaltic aggregate 20mm nominal size) including applying priming coat with ready mixed red lead paint and painting 2 or more coats with superior ready mixed paint of approved brand and manufacture in all shades as per direction of Engineer including transportation and loading , unloading charges etc complete.

Supply, fabrication and installing in position MS pre-fabricated Double leaf sliding gate of required width and height of approved size made of channels joists, angles, plates, pipes and MS sheets including stiffners, bracing, fabricated hinges, MS aldrops, locking arrangment, tempered steel pivots, guide track of MS tee, ball bearing arrangment, casters wheels, guide rollers, etc. all complete as per drawing, specification and as directed by Engineering incharge all complete. The gate shall be fabricated out of Mild steel sections completed with applying a priming coat with ready mixed red lead paint and painting 2 or more coats with superior ready mixed paint of approved brand and manufacture in all shades. The structral steel works for gates shall include supply, fabrication, transportation, erection of structral steel gates complete with placing in position embaded parts in designed RCC concrete / brickwork and in road surface including cutting, grinding, drilling of holes, welding and painting etc complete.

Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc.with hairline finish, including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer, ( for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).

Providing and fixing M.S. plain grill of required pattern in Windows etc. with M.S. flats square or round bars with round headed bolts and nuts or by by screws with applying a priming coat of approved steel primer .

Providing and fixing of S.S. AISI 316 grade Railing of 1.05m high with glass panelling of 10mm toughened glass of approved make & approved colour fitting with S.S. glass studs with verticals of 38 X 38 mm S.S. pipe (16 guage - 1.25mm thk) at spacing of 1200mm c/c with fixing in Granite with core cutting & Chemical Grouting with top handrail of 50 mm dia S.S. pipe (16 guage - 1.25mm thk) as per detailed design and drawing or as directed by Engineer. including all materials, labour and equipment etc. complete.

Providing and fixing MS. railing system (all type of railing , Grab bar , hand rail etc ) modular in form , chemically passivated assembled with fittings made of Hollow tubes, channels, plates etc.with approved finish, including welding, grinding and ma

Providing and fixing frameless Single / Double leaf glass doors with 12mm thickness toughened crystal edge polished glass door with approved etching design of approved make & shade in curtain wall glazing system with door shutter fittings including the cost of top & bottom Pivot patch fitting, PVC door buffer panel connector pivot, over panel/side panel connector with pivot, bottom lock, stainless steel hardware fittings of 316 grade for operating door i.e. door handle 450mm Lg (as per approved finish) with SS brush finish , floor spring of approved make and locking arrangement etc. complete including the cost of cutting the floor and making good the same, as per design and drawing all complete as required.

Providing and fixing vitrified matt finished (600x600) and 10mm thick tiles in floor, treads of steps, landing on 25mm thick bed of cement mortar 1:3 and jointed with cement slurry complete.

Providing and laying Rectified & vitrified Matt finish finish decorative type tiles of size of 600 mm x 600 mm and 10 mm thick having water absorption within 0.1% to 0.5% of approved make, shade and pattern for Skirting ,dado in required position laid on a back coat of 12 mm cement mortar 1:3 including neat cement float,grouting, filling joints with cement slurry, curing and cleaning etc. Complete. (Price Range Rs. 600 to Rs.700 Per Sq.M )

Providing and laying Rectified and vitrified Antiskid finish decorative type tiles of size 600 mm x 600 mm and 10 mm thick having water absorption within 0.1% to 0.5% and conforming to IS Code 15622 of approved make, shade and pattern for flooring in required position laid on 20mm thk cement mortar 1:4 (1cement: 4 coarse sand) including neat cement float, grouting, filling joints with cement slurry, curing and cleaning etc. complete. ( Price Range Rs. 600 to Rs.700 Per Sq.M )

Providing and laying Rectified and vitrified decorative type tiles of size of 600 mm x 600 mm mm and 10 mm thick having water absorption within 0.1% to 0.5% of approved make, shade and pattern for Skirting ,dado in required position laid on a back coat of 12 mm cement mortar 1:3 including neat cement float,grouting, filling joints with cement slurry, curing and cleaning etc. Complete. ( Price Range Rs. 600 to Rs.700 Per Sq.M )

Providing and fixing 1st quality ceramic glazed wall tiles with Wall Ceramic Glazed Tiles : 300 x 600 (Johnson, Somany, Kajaria )conforming to IS:15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand ) and jointing with grey cement slurry @3.3kg per sq.m including pointing in white cement mixed with pigment of matching shade complete. (Price range Rs.775 to Rs. 825 Per Sq.M )

Kotah stone slab flooring over 20 mm (average) thick base laid over & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & complete with base of cement mortar 1:4 (1 cement : 4 coarse sand)

Kotah stone slab flooring over 25 mm thick in risers of steps, skirtings, dado & pillars laid on 12mm (average) thick cement mortor 1:3 (1 cement : 3 coarse sand) & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete.

Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer : Flamed finish granite stone slab. Jet Black

Providing and laying in position flooring of Amba White granite stone of approved shade and size 18 mm to 20 mm thick on bed 1:6 cement mortar including cement floats striking joints, pointing in C.M. 1:3 curing and cleaning etc. complete. (Price range 1600 to 1700Rs per Sq Mtr.)

Providing & fixing approved Flame Finish Granite Tread Tiles 20 mm thk. in single piece with rounded off nosing, antiskid groove laid on 20 mm (average) thick bed of cement mortar 1:4 (1 cement : 4 coarse sand) with neat cement slurry including pointing with pigmented cement slurry to match the shade of slab, cleaning etc. complete. (Price range 1600 to 1700Rs per Sq Mtr.)

Providing and laying Approved Colour mirror Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer. ( Price range 1500 to 1600Rs per Sq Mtr.)

Providing and fixing Approved Colour Polished Granite stone slabs (mirror polished) 18mm thick in risers of steps, skirting, dado and pillars laid on cement paste and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. (Price range 1500 to 1600Rs per Sq Mtr.) Jet Black

Providing and and laying vitrified unglazed porcelain tactile floor tiles in different sizes of Johnson, Somany, Kajaria (thickness to be specified by the manufacturer) and conforming to IS:15622 of approved make in colours and shades as specified laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) including grouting the joints with white cement and matching pigment etc., complete a) 300 x 300 mm Design - Liner

Providing and and laying vitrified unglazed porcelain tactile floor tiles in different sizes of Johnson, Somany, Kajaria (thickness to be specified by the manufacturer) and conforming to IS:15622 of approved make in colours and shades as specified laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) including grouting the joints with white cement and matching pigment etc., complete b) 300 x 300 mm Design - Buttons

Providing and fixing 18 mm thick Granite of any colour and shade, gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias, door frames and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. area of slab over 0.50 sqm ( Price range 1500 to 1600Rs per Sq Mtr.) Jet Black

Providing 25mm thick cuddapah slabs machine cut and polished on either side in partitions including making necessary grooves in the wall and fixing with cement mortar, complete as directed by the engineer. ( Price range Rs.300 to Rs.350 per. Sq.M )

Extra for providing opening of required size & shape for wash basins / kitchen sink in kitchen platform, vanity counters and similar location in marble / granite / stone work including necessary holes for pillar tap etc. including rubbing and polishing of cut edges etc. complete.

Providing and laying approved flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 40 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer. ( Price range 2300 to 2400Rs per Sq Mtr.)

Providing and fixing in position Glass mossaic tiles at finished plain/flat/curved/inclided surface of size 10-50 mm square x 4 mm in all colour, design , fixing in customize design as per direction of Engineer. The glass mosaic tiles to be fixed on the surface with the help of approved adhesive applied at the rate of 2.5 kg per sqm and grouting of the same. The rate is inclusive of all operation, material and required pattern approved by Engineer.

Providing leather finished polishing to Granite Stones labby continuous grinding in 4 coats of different bits to receive rough and matt finish including buffing processbe for laying and fixing of stone as per drawing and design, including cleaning, washing and finishing etc. complete.

Providing and laying integral cement based treatment (Box type) for water proofing on horizontal surface at all depth below ground level for under ground structures as directed by Engineer and consisting of : i) Ist layer of 20 mm to 25 mm thick approved and specified rough stone slab over a 25 mm thick base of cement mortar 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound conforming to IS:2645 in the recommended proportion over the leveling course (leveling course to be paid separately). Joints sealed and grouted with cement slurry mixed with water proofing compound. ii) 2nd layer of 25 mm thick cement mortar 1:3 (1 cement: 3 coarse sand) mixed with water proofing compound in recommended proportions. iii) Finishing top with stone aggregate of 10 mm to 12 mm nominal size spreading @ 8 cudm/sqm thoroughly embedded in the 2nd layer using rough Shahbad/Kotah stone.

Providing and laying integral cement based treatment (Box type) for water proofing on the vertical surface by fixing specified stone slab 20 mm to 25 mm thick with cement slurry mixed with water proofing compound conforming to IS:2645 in recommended proportions with a gap of 20 mm (minimum) between stone slabs and the receiving surfaces and filling the gaps with neat cement slurry mixed with water proofing compound and finishing the exterior of stone slab with cement mortar 1:3 (1 cement : 3 coarse sand) 20 mm thick with neat cement punning mixed with water proofing compound in recommended proportion complete at all levels and as directed by Engineer using rough Shahbad/Kotah stone.

Cleaning the surface and filling cracks (if any), applying epoxy putty wherever necessary, Providing and applying 3 coats of High performance moisture compatible corrosion resistant Food grade non toxic epoxy stearate coating (WATERSEAL) having impermeable film withstanding to hydrostatic pressure up to 5 kg/cm2 with a DFT of 250 microns on the prepared RCC surface. If there is honey combing or excessive unevenness in the surface then 10mm plaster in CM 1:3 should be applied on the entire surface followed by application of 2 coats of WATERSEAL with a DFT of 150 microns. incl. cost of scaffolding transport etc. as per dir of EIC. All the chemicals will be of Krishna Conchem Products Pvt. Ltd. or Equivalent.

Providing and fixing waterproofing treatment to sanitary blocks consisting of layers of laterite Brick bat coba of 75 mm thick in cement mortar 1:2 sand witched between two layers of cement mortar 1:4 (20 mm thick ) mixed with water proofing compound, top finishing coat of cement slurry 6 to 12 mm thick with water proofing compound etc. complete with 32 mm dia PVC pressure relief pipe of adequate length including waterproofing treatment to 750 mm height (maximum) of side wall,inlet/outlet pipe gaps sealing and bottom surface in cement mortar 1:4 with waterproofing compound and covering 10 years guarantee on court fee stamp of Rs. 100 with ponding test including all lead, lift etc.All works complete as per the drawing, specification and direction of the Engineer. NOTE:- Contractor shall provide warranty /guarantee from the authorized / specialized applicator for a minimum period of 10 years from the date of completion of project including rectification of any leakages / dampness free of cost observed during guarantee period. All works complete as per the drawing, specification and direction of the Engineer.

Providing water proofing treatment over the new R.C.C. roofs terrace toilet by spreading cement slurry over the R.C.C. slab and laying of 10cms. Average laterite stone ballast coba with the necessary gradient for easy flow of rain water and the coba in covered with damp proof of Hindustan water proofing co. Or equivalent jointless water proofing plaster of mix 1:3 ( 1 cement : 3 find sand), finished smooth with wooden trowel with false marking of 30 cms square. The vertical surface of the adjoining walls are to be treated upto a height of 30cms including rounding of junction (the rate includes for complete items including labour and materials and including cost of initial treatment of roof slab as follows. The injunction of damp proof or equivalent compound with cement solution will be given as and when found necessary for filling honey comb, cracks etc. in the R.C.C. slabs). NOTE: cement consumption 25 kg/sq.m.

Supplying and applying single component, elastomeric 100% pure polyurethane coating, Dr.Fixit Flexi PU 270 I or equivalent, which is free from bitumen & tar and meets the requirement as per ASTM C 836-18, having elongation of 400% (As per ASTM D412), Tensile strength greater than 2MPa (As per ASTM D 412), Tear strength greater than 15 N/mm (As per ASTM D 624), Water Vapor Permeability greater than 25 gm/m2/day (As per ISO 9932:91), Adhesion to concrete more than 1.5 N/mm2 (As per ASTM D4541), Resistant to plant roots as per UNE CN/TS 14416, applied with a total consumption of 2.5Kg/Sqm to achieve a minimum of 1.5 mm system DFT to satisfy the requirements of LAM as per ASTM C898, including reinforcing the coating with 45gsm glass fibre mesh at all corners and change in directions. The coating shall be continued to the entire horizontal area and should be terminated at 300mm above FFL over the vertical surface as per manufacturers specification and methodology. The system includes base preparation of cleaning, brushing and removal of flacky materials, grouting the porous area with cementitious grout, proper coving of min. 75 x 75 mm between slab and wall junctions Followed by flashing treatment with waterproofing membrane and Geotextile membrane/Fleece embeded between the two coats of waterproofing membrane. Finally priming the entire surface with high epoxy primer applied with a total consumption of 200 gms/Sqm, followed by application of polyurethane coating in three coats. ii) Supplying and applying protective geo textile fabric of 120 GSM over the entire membrane with proper overlaps , protected with Screed ( Payable in relevant item) iii)All the pipes to placed / inserted in the core cut areas, shall be placed appropriately to be grouted around the cut bores. Roughening the pipe surface with hacksaw blade and applying a coat of SBR modified latex, Dr. Fixit Pidicrete URP or approved equivalent and sprinkling sand for proper adhesion. Grouting the gaps between the pipe and the core cutting by high strength non-shrink cementitious grout, Dr Fixit Pidigrout 10M that shall be poured into the gaps after fixing in place an effective leak-free shuttering and support. Allow the grout to set for 24 hrs. And do the moist curing for 5 days. The area around the pipes (10mm) shall be filled with Feviseal HY100 PU Sealant or equivalent. Followed by flashing treatment with waterproofing membrane and Geotextile membrane/Fleece embeded between the two coats of waterproofing membrane.

Supplying and applying an average of 75mm thick M20 grade concrete screed including saw cuting (approx 6mm W x 10 mm D) at 3MX4M panels and filling the groove with PU sealant, and making angle fillet of 100mmX100mm using M20 grade concrete at the corners.

Supply & fixing of 16mm thick 600 mm width MULTIWAL MULTICELL polycarbonate system consist of: The panel

Providing & Fixing in position Double Skin roof with Zincalume/ Galvalume colour coated & bare profile sheet with subtle square fluting factory cut at all heights for roof, side & Gable cladding complete in all respect. TOP SHEET-The end rib shall be designed for anti-capillary action. The feed material should be manufactured out of nominal 0.45 mm Base Metal Thickness (BMT), Hi-strength steel with min. 550 MPa yield strength, metallic hot dip coated with Aluminium-Zinc alloy (55% Aluminium, 43.5% Zinc &1.5% Si) as per AS 1397 - Zincalume AZ150 (Min. 150 gms/sq.mt total on both sides) with quality paint coat as per AS/NZS 2728 type 3-4. The paint shall have a total coating thickness of nominal 35 μm, comprising of nominal 20 μm exterior SMP coat on top surface and nominal 5 μm reverse backer coat on back surface over nominal 5 μm primer coat on both surfaces of approved colour shade. Total Coated Thickness (TCT) should be 0.50mm. Total Painted Thickness (TPT) should be in addition to 0.50mm. The steel sheet shall be fastened with nominal 40 μm zinc coated or nominal 25 μm zinc-tin alloy coated, Hex head, self-drilling screw as per AS 3566-2002 Class 3 fasteners of approved make with EPDM washer as per the requirement considering the profile shape and design load. The fastener size shall be calculated as per the design or manufacturers recommendations. The profile sheet, fastener size etc. shall be approved by the Engineer. The sheeting should be with minimum 200mm lap & waterproof with Silicon sealant non-hardening neutral cure type shall be applied at all end laps, complete as directed Z-Sub Girt - roll formed section 50x50x50x1.50 TCT, 120GSM Galvanised, High Strength (345 MPa), approximate Wt. 1.85 kg/r.m. fixed with self tapping screws Rock Wool Insulation with FSK facing 50mm with 48 kg/m3 density in between 2 sheets. LINER SHEET-bare galvalume/zincalume roofing sheet of same profile as top sheet. The feed material is of manufactured out of nominal 0.45 mm Base Metal Thickness (BMT) (0.47 mm TCT), Hi-strength steel with min. 550 MPa yield strength, metallic hot dip coated with Aluminium-Zinc alloy (55% Aluminium, 45% Zinc) as per AS 1397 - Zincalume AZ150 (Min. 150 gms/sq.mt total on both sides), passivated & resin coated. The feed material should have coil manufacturer’s product details marked at regular interval for confirming genuinity of the material. complete as per the directions of the engineer. The steel manufacturer's test certificate for the chemical & mechanical properties of steel must be submitted for approval prior to installation.

Design of overall Tensile structure for canopy including membrane (fabric) 8120000.00 & Steel. Supply of fabricated steel as per design, Erection, Painting of Steel structure & Installation & tensioning of Membrane (Fabric). Wind load of 44 m/s. 1.38 Kn/Sqm. Designing, Supply, Fabrication & Erection of Structural steel works with necessary Gusset Plates, Stiffener plates, Brackets, Bolts, Cleats etc., including painting. Structural frame shall be of Factory fabricated from structural steel using standard make IS 1239 pipes. YST240 the steel design shall be as per IS code 800. All segments of the assembly will be welded properly By mig weld & all sharp edges and corners are grinded. The steel shall be enamel painted with two coats at site (with brush) over zinc chromate primer for good finish.APPROVED MAKE: JINDAL/ APPOLLO/ SURYA/ NEUZONE,Designing, Supply Fabrication & Installation of PVDF fabric to be used is Serge Ferrari, France Flexilight 902S2(950 gsm) of tensile strength 420/400 daN/5cm and 832S2(850 gsm) of tensile strength 420/420daN/5cm. Steel cables, endplates, Tensioning hardware and all accessories. The fabric used for the tensile structure to be analyzed for its strength requirement and behaviour in tensile engineering software Ixcube and to be chosen after deriving through analysis. Fabric pattering is done on Ixcube software considering fabric prestress, structure form, welding joints and fabric elongation properties. All fabric patterns are plotted on fabric rolls by plotter and welded on high frequency welding machine in dust proof conditions. Fabric warranty period will be - 10 years. Colour of fabric are white and Grey Approved Make: Serge Ferrari, France Flexilight 902S2(white color) & 832S2(grey colour) both sides PVDF coated PVC fabric.All Structural wire rope shall be of 10 mm dia steel core galvanized 6/19, conforming to IS Steel Cable Manual requirement. End plate should be hot dip galvanized. All Cables and end fitting shall be delivered clean & dry. Swaged end fittings, Tensioning hardware (Viz. fork terminal, turn Etc) are galvanized & painted.Approved Makes: USHA MARTIN/DP WIRES complete as per drawing for finished item of work and as directed by the Engineer-in-Charge.

Providing and fixing colour coated galvulium roofing sheets of 0.5mm thickness including all the accessories (TATA mak

Add for providing & fixing Flashings -[Corners, Ridges, valleys, gable end & Trims] (Girth upto 610mm) including all the accessories complete as per the directions of the Engineer in charge.

Providing & fixing in position Galvalume/Zincalume flashings, cappings, ridges, gutters upto 600mm/610mm girth and min 3.00m in length (cold Rolled Steel 550 MPa yeild Stress ASTM A 446 Grade E) with hot-dip metallic coating of aluminium-zinc alloy(AZ 150 galvalume) (150 gms/sqm total of both sides with Al-Zn Composition= 55% & 43.5% resp. & 1.5% Si conforming to ASTM 792/ AS 1397) 0.45 mm base metal thickness and 0.50mm total coated thickness, factory cut at all heights for roof, side & gable cladding complete in all respects with AZ 150 GSM SMP color Coated (20mic exterior coat of Silicon Modified Polyester paint system over 5 mic primer and 5 mic polyester back coat over 5 mic primer) incl. fixing to purlins with no 12x14x55mm mechanically galvanised hex head self drilling screws of the best quality as per AS-3566 class 3-4 approved, which should be compatible to be used with sheets. with integral washers and EPDM seals etc. Silicon sealant non-hardening neutral cure type shall be applied at all end laps, complete as directed.

12 mm thick cement plaster 1:4 (1 cement:4 fine sand)

6mm thick cement plaster with 1:3 (1 cement : 3 fine sand)

Providing and applying white cement based putty of average thickness 1.00mm of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Forming & Finishing the 20 mm groove in plastered surface & repair the edges as per specifications and directions of the Engineer In Charge.

18mm cement plaster in two coats under layer 12mm thick cement plaster 1:5 ( 1 cement : 5 coarse sand) and top layer 6mm thick with cement plaster 1: 3 (1 cement : 3 coarse sand) finished with sponge.

20mm cement plaster 1: 3 (1 cement : 3 coarse sand)

Rough cast plaster with a mixture of sand and gravel or crushed stone from 2.36mm to 12.5mm nominal size dashed over and including fresh plaster in two layer 12mm cement plaster 1:4 (1 cement : 4 coarse sand) and top layer 10mm cement plaster 1: 3 (1 cement : 3 fine sand) mixed with 10% finely grounded hydrated lime by volume of cement. a). Natural cement finishing using ordinary cement

Extra for plastering exterior walls of height more than 10m from ground level for every additional height of 3m or part thereof.

Extra for providing and mixing water proofing material proportion recommended by the manufacturers. (a)12mm cement plaster 1: 3 (1 cement : 3 sand)

Providing and filling joints between concrete and masonry wherever specified in cement mortar including raking the joints to form "V" groove, applying neat cement slurry, filling with aggregate of 20 mm or less (Katka) in cement mortar 1:4 (1 cement : 4 fine sand), cleaning and curing etc. to avoid cracks at the joints.

Providing and fixing GI hexagonal chicken wire mesh 22 gauge size of 20cm wide at the junction of dissimilar surface of brick / block masonry wall and RCC column/ beam and the like including necessary "U" nails for fixing , overlapping etc. complete as per specification and as directed by Engineer for all floors and at all height.

Painting (two or more coats) with synthetic enamel paint of approved brand and manufacture in all shade or new work over and under coat of suitable shade with ordinary paint of approved brand and manufacture to give an even shade

Painting three or more coats with acryllic exterior paint of approved brand and manufacture (Such as Dulex/ Asian Paints/ Sherwin Willians) including applying one coat of cement primer and one coat of surface treatment etc. complete.

Wall painting (two or more coats) with plastic emulsion paint of approved brand and manufacture on new work to give an even shade.

White washing with lime on new work ( three or more coats) to give an even shade.

Providing and applying Texture plaster with finishing with texture material of approved make in 3 to 4 millimeter thickness on previously plastered surface, including Plaster Groove 6mm thickness or Tape Grooves 35 to 45 mm thickness or as required, in all position including preparing the surface, scaffolding, Painting etc. complete

Extra for painting on walls on the outside at height more than 10m from ground level for every additional height of 3.0 m or part thereof.

Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc. including: a) Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design. b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc. c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminium items. The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete , as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places.

Design, fabricate, package, deliver (to Job site) and install curtain wall systems comprising specified glass. The glass panels will be mechanically supported to the aluminium main frame with pressure plate & cover cap on outer surface and fixed onto mullions and transoms including functional design of the aluminum sections for fixing glazing panels of various thicknesses, aluminium cleats, sleeves and splice plates etc. gaskets, screws, toggles, nuts, bolts, clamps etc., structural and weather silicone sealants, flashings, fire stop (barrier)-cum-smoke seals, microwave cured EPDM gaskets for water tightness,pressure equalisation & drainage and protection against fire hazard with all approved standard accessories and hardware’s of approved make. All aluminium extruded profiles shall be confirming to alloy 6063 T6. All Aluminium profiles shall be with pure ployster powder of thickness 75-80 microns and shade shall be as per architect's approval. The curtain wall shall be sealed to the host structure and not adjoining materials with approved water proofing membrane and insulation to prevent sound transmission. The System and glass shall be designed to withstand 1.5 times the design wind pressure at all levels, elevation & heights. The anchoring / bracing of the curtain wall system to the RCC slab / beams / columns shall be done with non-corrosive galvanized brackets of approved design (80-90 micron thickness) and including providing teflon shims of various thickness to adjust the beam level / line variations fixed with SS dash fasteners Hilti , Fisher or equivalent of min. 12mm dia. and depth of 50-80mm in the concrete and to withstand the dead load of the curtain walls as well as stresses due to wind pressure etc. Expansion joint gap for mullion shall be minimum 15 to 20mm filled with expansion joint sealant from Dow Corning of DC 790 . All screws, washers used shall be only stainless steel of 304 grade and Through Bolts , Nuts & anchors used shall be only stainless steel of 316 grade.The contractor must design the system as per the prevalent site conditions and building elevation profiles. No extra claims shall be entertained at any stage for aluminium profile wall thickness and size dimensions. Material supporting arrangements shown in the drawing are indicative and contractor shall make their own shop drawings and suggest method of fixing with type of anchors they propose to use where they are to be fixed. including providing and supplying at site additional frame with all accessories and hardwares for the openable panels as specified and of the approved make such as heavy duty stainless steel friction hinges, min 4 -point cremone locking sets with stainless steel plates, handles, buffers etc. including necessary stainless steel screws/ fasteners, nuts, bolts, washers etc. all complete as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineerin- Charge. Work to include required double legged independent scaffolding for entire height or as required to approval of the PM.

Design, fabricate, package, deliver (to Job site) and install Cap curtain wall glazing systems comprising 6mm toughened glass of approved make with light control 3M window film having main frame of verticals and horizontals ( Aluminium Mullion & Transom Section ) , pressure plate & cover cap of appropriate size, made out of specially designed extruded aluminium sections with design drawing intent, fabricated, fixed at all levels, elevation and heights to the Masonry/RC walls with necessary clamps, appropriate grade brackets, aluminium angles , screw and anchor fasteners , scaffolding material etc complete. All clamps and brackets shall be Mild Steel Hot dip galvanized. The extruded aluminium section shall be powder coated to 60 microns in approved colour. Glass will be fixed by screwing pressure plate & using both side EPDM gasket. Weather sealant will be of Dow Corning/ Wacker/G.E. or equivalent Grade. All incidental works and complete the job as per approved drawings and specifications , gaskets shall be E.P.D.M.

Supply and fixing of Customized perforated screen panel cladding fixed system . The Screen panels of various sizes maximum to 900mm X 4000 mm as per design requirement shall be manufactured from high corrosion resistant aluminium alloy of 3.0mm thickness which shall be fixed to a suitable and rigid MS substructure. Screen panels shall have customized perforation as per architects design and is to be provided to suite the design Panels. Panels shall be coated on visible side with Exterior Powder Coating in approved colour. The panels of required length and height shall be fixed to sub structure by means of GI screen panel guide clamps of 20 x 43x 2mm . Panels shall be bending from all four sides and shall have extended flanges to accommodate clamps. The Panels shall be fixed to a suitable structure by means of fixing side extrusion fixed to the panel at appropriate centers to proprietary metal clamp to a support system taking into account the relevant live loads and a dead load. There will be a provision for an expansion joint of 20mm between two adjacent panel ends. Installation shall be carried out as per manufacturer recommendation. Rate shall be exclusive of required MS substructure which will be paid in relevant item.

Providing and supplying aluminium extruded tubular and other aluminium sections as per the architectural drawings and approved shop drawings , the aluminium quality as per grade 6063 T5 or T6 as per BS 1474,including super durable powder coating of 60-80 microns conforming to AAMA 2604 of required colour and shade as approved by the Engineer. (The item includes cost of material such as cleats, sleeves, screws etc. necessary for fabrication of extruded aluminium frame work. Nothing extra shall be paid on this account).

Providing & fixing of FRP cladding (Minimum 4mm Thickness). The FRP cladding shall be fixed to a suitable and rigid MS substructure. Fiber Should be as per the desired size, shape and profile of the finished structure. Fiber should be finish With 2/3 Coats PU Paint and Over PU Paint finish with sealer Coat (Glossy/ Matt) Finish should be simillar to the photofeatures approved by the Architect. Rate shall be inclusive of Scaffolding , reinforcement welding if any as per structural design. Work should be as per detail design & drawing and to the satisfaction of the Architects/ Client. Shop Drawing Preparation from 3D Views shall be in the scope of Vendor/contractor. Rate shall be exclusive of required MS substructure which will be paid in relevant item.

Providing and fixing in position 8 mm Toughened Glass Of Approved Make ,shade & Sizes for skylight at basement floor. The cost includes the cost of providing and fixing of toughened glass and all necessary fittings for fixing of glass, support, glazing clips,rubber beadings using brass screws and joints will be sealed with weather silicone of dow corning 789 grade to make joints leak proof and also includes all incidental works complete as per detailed drawings and to the complete satisfaction of the architect scaffolding material etc complete.

Providing anti-termite treatment to the buildings conforming to I.S.S.6113 part II 1971 (revised) including adopting the precautions for health hazards and safety measures as required therein with the cost of all materials, chemicals, plants, equipments required for the treatment and furnishing a guaranty for a minimum period of 10 years from the date of completion including eradicating any infestation of termite free of cost during the guaranty period complete. The payment will be made on plinth of the building (a) preconstruction.

Making plinth protection 50mm thick of Cement Concrete 1:3:6 (1cement : 6 graded stone aggregate 20mm nominal size) over 75mm bed of dry laterite aggregate 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth.

Drilling 150 mm deep hole in R C C and grouting the rebar, lockfix etc complete. a) 10 mm Dia

Drilling 150 mm deep hole in R C C and grouting the rebar, lockfix etc complete. b) 12 mm Dia

Drilling 150 mm deep hole in R C C and grouting the rebar, lockfix etc complete. c) 16 mm Dia

Providing & fixing expansion joint between structural members by fixing 50 mm thick TF quality thermacol sheet on one surface to serve as shuttering as directed by engineer.

Providing and fixing of expansion joint system of approved make and manufactures for various roof locations as per approved drawings and direction of Engineer- In-Charge. The joints shall be of extruded aluminum base members with, self aligning and self centering arragement support plates as per ASTM B221-02. The system shall be such that it provides watertight roof to roof/roof to corner joint cover expansion control system that is capable of accommodating multidirectional seismic movement without stress to its components. System shall consist of metal profile that incorporates a universal aluminum base member designed to accommodate various project conditions and roof treatments. The cover plate shall be designed of width and thickness required to satisfy movement and loading requirements and secured to base members by utilizing manufacturer's pre-engineered self-centering arrangement that freely rotates / moves in all directions. The Self centering arrangement shall exhibit circular sphere ends that lock and slide inside the corresponding aluminum extrusion cavity to allow freedom of movement and flexure in all directions including vertical displacement. The Joint System shall resists damage or deterioration from the impact of falling ice, exposure to UV, airborne contaminants and occasional foot traffic from maintenance personnel. Provision of Moisture Barrier Membrane in the Joint System to have water tight joint is mandatory requirement. Material shall confirm to ASTM 6063. Roof Joint of 75 mm gap

Providing and fixing of expansion joint system related with floor location as per drawings and direction of Engineer-In- Charge. The joints system will be of extruded aluminum base members, self aligning / self centering arrangement and support plates etc. as per ASTM B221-02. The system shall be such that it provides floor to floor /floor to wall expansion control system for various vertical localtion in load application areas that accommodates multi directional seismic movement without stress to it's components. System shall consist of metal profiles with a universal aluminum base member designed to accommodate various project conditions and finish floor treatments. The cover plate shall be designed of width and thickness required to satisfy projects movement and loading requirements and secured to base members by utilizing manufacturer's pre-engineered self-centering arrangement that freely rotates / moves in all directions. The Self –centering arrangement shall exhibit circular sphere ends that lock and slide inside the corresponding aluminum extrusion cavity to allow freedom of movement and flexure in all directions including vertical displacement. Provision of Moisture Barrier Membrane in the Joint System to have watertight joint is mandatory requirement all as per the manufactures design and as approved by Engineer -in-Charge . (Material shall confirm to ASTM 6063.) Floor Joint of 75 mm gap

Providing and fixing of expansion joint system related with wall joint (internal/ external) location as per drawings and direction of Engineer-In-Charge. The joints shall be of extruded aluminum base members, self aligning / centering arrangement and support plates as per ASTM B221-02. The material shall be such that it provides an Expansion Joints System suitable for vertical wall to wall/ wall to corner application, both new and existing construction in office Buildings & complexes with no slipping down tendency amongst the components of the Joint System. The Joint System shall utilize light weight aluminum profiles exhibiting minimal exposed aluminum surfaces mechanically snap locking the multi-cellular to facilitate movement. (Material shall confirm to ASTM 6063.) Wall Joint of 75mm gap

Providing and fixing weepholes with rigid PVC make laid in position with a required slope and level while layingpipes of approved the concrete of retaining wall,wing wall and earth retainig structure complete as directed by the Engineer in charge a) 110 mm dia

Providing and fixing weepholes with rigid PVC make laid in position with a required slope and level while layingpipes of approved the concrete of retaining wall,wing wall and earth retainig structure complete as directed by the Engineer in charge b) 75 mm dia

Providing and fixing bituminous pad 25mm thick for expansion joints in retaining wall, compound wall etc. complete.

Supply & Laying one layer of 200 micron LDPE slip membrane as pour proceeds, minimum lap of 200mm, laid both direction one above other, as per Engineer-in-charge.

Providing & fixing Below Mentioned Items made in fiber (FRP/GRP/ ANY OTHER MATERIAL SPECIFIED BY VENDOR) alongwith fabricating a rigid skeletal frame work by welding steel bars/weld mesh as per the desired size, shape and profile of the finished structure .Finish should be simillar to the photofeatures approved by the Architect. Rate should be inclusive of Scaffolding , reinforcement welding, framework as per structural design. Work should be as per detail design & drawing and satisfactory of the Architects. a) Mural wall in theming as per tender drawing

Providing & fixing Below Mentioned Items made in fiber (FRP/GRP/ ANY OTHER MATERIAL SPECIFIED BY VENDOR) alongwith fabricating a rigid skeletal frame work by welding steel bars/weld mesh as per the desired size, shape and profile of the finished structure .Finish should be simillar to the photofeatures approved by the Architect. Rate should be inclusive of Scaffolding , reinforcement welding, framework as per structural design. Work should be as per detail design & drawing and satisfactory of the Architects. b) Themed Painting as per tender drawing

Providing & fixing Below Mentioned Items made in fiber (FRP/GRP/ ANY OTHER MATERIAL SPECIFIED BY VENDOR) alongwith fabricating a rigid skeletal frame work by welding steel bars/weld mesh as per the desired size, shape and profile of the finished structure .Finish should be simillar to the photofeatures approved by the Architect. Rate should be inclusive of Scaffolding , reinforcement welding, framework as per structural design. Work should be as per detail design & drawing and satisfactory of the Architects. c) Sitting Benches of required Length in FRP as per tender drawing

Providing & fixing Below Mentioned Items made in fiber (FRP/GRP/ ANY OTHER MATERIAL SPECIFIED BY VENDOR) alongwith fabricating a rigid skeletal frame work by welding steel bars/weld mesh as per the desired size, shape and profile of the finished structure .Finish should be simillar to the photofeatures approved by the Architect. Rate should be inclusive of Scaffolding , reinforcement welding, framework as per structural design. Work should be as per detail design & drawing and satisfactory of the Architects. d) Dustbin in single piece of Ht. 0.75m in FRP as per tender drawing

Providing & fixing Below Mentioned Items made in fiber (FRP/GRP/ ANY OTHER MATERIAL SPECIFIED BY VENDOR) alongwith fabricating a rigid skeletal frame work by welding steel bars/weld mesh as per the desired size, shape and profile of the finished structure .Finish should be simillar to the photofeatures approved by the Architect. Rate should be inclusive of Scaffolding , reinforcement welding, framework as per structural design. Work should be as per detail design & drawing and satisfactory of the Architects. e) Decorative Planters- 1.5mx1.5mx0.75m

Providing & fixing Below Mentioned Items made in fiber (FRP/GRP/ ANY OTHER MATERIAL SPECIFIED BY VENDOR) alongwith fabricating a rigid skeletal frame work by welding steel bars/weld mesh as per the desired size, shape and profile of the finished structure .Finish should be simillar to the photofeatures approved by the Architect. Rate should be inclusive of Scaffolding , reinforcement welding, framework as per structural design. Work should be as per detail design & drawing and satisfactory of the Architects. f) Decorative Pots -1.2x 1.2 x 0.60

Providing & fixing Below Mentioned Items made in fiber (FRP/GRP/ ANY OTHER MATERIAL SPECIFIED BY VENDOR) alongwith fabricating a rigid skeletal frame work by welding steel bars/weld mesh as per the desired size, shape and profile of the finished structure .Finish should be simillar to the photofeatures approved by the Architect. Rate should be inclusive of Scaffolding , reinforcement welding, framework as per structural design. Work should be as per detail design & drawing and satisfactory of the Architects. g) Railing of Ht 1.00 m in FRP as per tender drawing

Supplying and spreading Geo fabric filter layer of geo textile of polypropylene multifilament woven to the line and level and grade with pore size less than 0.075mm and permeability greater than 9 lit/m2 confirming IS -1964 and American standard for testing of the material standards including conveying with to the site joning and stitching with proper over lap etc.in all conditions as directed by the engineer in charge

Providing and fixing 45 cm wide G.I. rung ladder of ISMC 75 as a verticle runner fixed aprt 200 mm from wall with same section at 0.9 m center to center and steps of 32 x 32 x3 mm size G.I. pipe with anti-skid marks at a distance of 300 mm center to center for water tank including fixing it in RCC work with HILTI chemical fastner wherever required and painting the ladder with anti rust Pu coated paint & primer etc complete. ( Length of ladder will be measured for payment purpose)

Supplying and fixing air tight FRP cover with frame of size 900 x 600 mm for manholes opening of Under ground water tank including required accessories , consumables, finishing with cement punning, curing etc. complete, as per direction of engineer in charge.

Providing & fixing in position M.S. class C hot dip galvanized Pipe inserts, including puddle flanges as per the drawing with one or both ends with flange & one end threaded in position in RCC work as per specification etc. at all lifts, heights & leads as directed by the PM to his entire satisfaction.

Providing and fixing 50x50mm snap-on PVC/Vinyl/ Acrylic 90 Degrees angles surface mounted corner guards as edge protection. It should have hi impact resistance, chemical and stain resistance. The inner extruded aluminium continuous retainer should be fixed to wall/concrete surface with non corrossive fastners which are compatible with aluminium retainer. Adjustable top & bottom matching end caps, high impact vinyl acrylic snap-on matt finished, consisting of PVC cover, base, top end etc complete. 900 to 1200 high.

Providing & filling cinder/AAC blocks or any such similar light weight material at any lead & level incl. watering, consolidating , top surface dressed and levelled to proper gradient etc.complete as per direction of engineer incharge.

Providing & fixing sandstone Sculptures/statue of height 1.80m with required RCC base as per the desired size, shape and profile of the finished structure. Finish should be simillar to the photofeatures approved by the Architect. Rate should be inclusive of Scaffolding, concreteting works as per structural design. All works complete as per the drawing, specification & direction of the Engineer.

Providing & fixing of river wash pebbles size 2" to 2.50" dia in natural colour at the site including loading, unloading & handlelling etc. Complete

Providing & fixing removable kiosk made from powder coated alumnium frame works woven with Synthetic wicker as per the desired size, shape and profile of the finished structure. Finish should be simillar to the photofeatures approved by the Architect. Rate should be inclusive of required fram works as per structural design. All works complete as per the drawing, specification & direction of the Engineer.

Carting away unwanted excavated material such as soil, lime, moorum, building rubbish, laterite stone, ordinary rock etc. from site lead of 20 km including all loading & unloading charges ( A ) ( by mechnaical Automative Transport ) Contractor should arrange land for dispose up these material at his own cost Lead upto 20 km.

Providing woodwork in frames of doors, windows, clerestory windows trusses & other frames wrought framed and fixed in position. Second class Indian teak wood

Providing & fixing 31 mm thk marine plywood work in frames of doors using 19mm +12 marine ply (waterproof) finished with 1 mm approved laminate, all hardware,and other frames and fixed in position with required fastners, adhesive etc. complete as specified as shown in the drawings.

Providing flat iron hold fast 40 cm including fixing to frame with 10 mm dia bolts, nuts and wooden plugs and embeded in cement concrete block 30 x 10 x 15 cm 1:3:6 mix (1 cement: 3 coarse sand: 6 stone aggregate 20 mm nominal size. 40 x 3 mm flat iron hold fast, 15 cm long

Providing and fixing first class Indian teak wood moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surfaces etc. 50 X 12 mm

Providing & fixing 35mm thk flush door shutter with 1st cl teak ply both faces, core of block board construction with frame of teak wood beading 35m x 12mm thick with well matched first class laminate 1 .00 mm Thick on both faces. Rate should be including cost of Adhesive, Nails during fixing etc. complete.

Providing & fixing matt finished SS handles of SS 304 grade of steel with necessary screws etc. complete. 200 mm

Providing & fixing Stainless Steel Cylindrical lock 60mm dia with pair of knob, keys etc. with necessary screws etc. for doors complete as approved by engineer. Entrance Function: Internal Push Button & External Key Operation

Providing & fixing Stainless Steel tubular lever D-Type mortise handles with round/Square nose, 24mm Mortise/sash lock body & Strike plate (all SS Finish), Pin cylinder 60mm with one side key and other side knob/thumb turn with necessary screws etc. complete

Providing and fixing Stainless steel D type handles with necessary screws etc complete a) L 300mm/325mm x 22 to 25mm dia

Providing & fixing bright finished Stainless Steel Aldrops with screws etc. complete. 250 x 150mm

Providing and fixing bright finished Stainless Steel bearing hinges of 125 x 70 x 4 mm with necessary screws etc complete

Providing & fixing 100 mm bright finished Stainless Steel SS 304 grade floor door Stopper with rubber cushion , magnetic catcher , screws etc. to suit shutter thickness complete.

Providing & fixing bright finished Stainless Steel SS 304 grade Tower bolts (barrel type) with screws etc. complete. 300 x 10 mm

Providing and fixing SS hydraulic door closer of approved make with necessary screws and fittings complete.

Extra for cutting rebate in flush door shutter (total area of the door to be measured)

Providing and fixing of approved make 120mins Hollow metal fire rated doors tested and certified design as per IS 3614 part-2 & BS 476 part-20 & 22 at NABL Approved Laboratory & CBRI for its stability and integrity . Recommended fire door design is similar to earlier test evidence from NABL OR CBRI Approved Laboratory with or without vision lite of 5 mm glass for maximum fire rating of 2hrs . Doors will be finished in Powder Coating with film thickness of 60 microns approx. in desired RAL Shades. The manufacturer company should be member of NFPA and ISO 9001-2015 cerified . Door frame should be Single rebate profile of minimum size 100mm X 57 mm made out of 1.5mm minimum thick galvanized steel sheet. 125x75 Frames will be mitered jointed and field assembled with miterd joint. The frames will be finished with Powder Coating in desired RAL Shade Door leaf shall be minimum 46mm thick fully flush double skin door with or without vision lite. Door leaf shall be manufactured from 1.2mm minimum thick galvanised steel sheet. The internal construction of the door should be rigid reinforcement pads for receiving appropriate hardware. The infill material is honey Comb craft paper. All doors are factory prepared for receiving appropriate hardware and provided with necessary reinforcement including EPDM smoke seal , Panic Latch , locks, SS aldrops, 5 no's heavyduty stainless steel ball bearing hinges for each shutter, 2 hrs fire rated door closer,including,Vision Panel & fixing in position of fire department approved Photoluminescent Signages on door shutter such as "push"/ "pull" or "push bar to open" on both sides all complete as shown in drawings.All works complete as per the drawing,Volume -II specification and direction of the Engineer. Note: Contractor have to submit shop drawing for approval.

Vaccum dewatering of laid concrete for roads/ areas using Tremix machinery including formwork with MS channel/ angle sections on sides of concrete with proper supporting system, surface/screed & needle vibrating & levelling of concrete. Vaccum dewatering should be done using suction mats (spread on surface) & suction pump, power floating/ troweling using screen floater, manual spreading of hardening compound (if any), smooth/rough/broom finish to the required slope, camber & level, groove cutting (upto 10mm wide x50mm deep) for contraction/expansion, construction & longitudinal joints, Providing dowel bars with sleeve/tie bars, filling two component polysuphide sealant/joint filler (Bitumen hot sealing compound: Grade A), taping with masking tape etc complete. (Concrete, reinforcement, Dowel Bar with sleeve/tie bar Reinforcement, tarpaulin sheet to be paid separately)

Providing and laying filter media with Granular materials crushed stone Aggregates satisfying the rerquirement As Per Clause 2504.2.2 of MOSRT & H Specification to a thickness of 500 mm laid horizontally in layers of 250mm thick and compacted to firm condition etc. complete as direction by Engineer-in-charge.

Providing & Fixing Flat Type Rubberized speed breaker of 400 mm wide & 50 mm height for general traffic at preferred crossing speed of 25 km/h and above as per standard having and specification in IRC in Black / yellow colour . The rubberized speed breaker shall be fixed with all required nails, anchor fastners, accessories all etc. complete.

Providing and laying factory made Shot blasted cement concrete interlocking paver block of minimum M35/M40 grade made by heavy duty block making machine with strong vibratory compaction and of aprpoved size and design / shape laid in 50 mm thick compacted bed of coarse sand, filling the joints with coarse sand, etc. all complete as per the direction of Engineer.- in Wave, Rectangular, Square etc. shapes. The products should comply to IS 15658:2006 and manfucatured by ISO9001: 2008 certified plant. The shot blasting should be done using 0.4-0.5mm dia steel shots with a speed of 3200 rpm. a) 80 mm thick in all colours except grey (M40 grade)

Providing and laying factory made Shot blasted cement concrete interlocking paver block of minimum M35/M40 grade made by heavy duty block making machine with strong vibratory compaction and of aprpoved size and design / shape laid in 50 mm thick compacted bed of coarse sand, filling the joints with coarse sand, etc. all complete as per the direction of Engineer.- in Wave, Rectangular, Square etc. shapes. The products should comply to IS 15658:2006 and manfucatured by ISO9001: 2008 certified plant. The shot blasting should be done using 0.4-0.5mm dia steel shots with a speed of 3200 rpm. b) 80 mm thick in grey colour (M40 grade)

Providing and Laying factory made coloured chamfered edge Cement concrete grass paver blocks of required strength,thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of fine fine aggregate (natural sand/crushed sand VSI grade finely washed etc.), compacting and proper embedding/laying of inter locking paver blocks into the fine aggregate (natural sand/crushed sand VSI grade finely washed etc.) bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine aggregate (natural sand/crushed sand VSI grade finely washed etc.) and cutting of paver blocks as per required size and pattern, finishing and sweeping extra fine aggregate (natural sand/crushed sand VSI grade finely washed etc.) and complete as per manufacturer spsecifications & direction of Engineer-in-Charge. 60mm thick CC paver block of M-35 grade concrete with approved colour and design & pattern. As directed by Engineer in charge.

Providing and laying RED & BLACK GRANITE cobble stones of 100mm x 100mm x 100mm, 3 line dressing with 12 mm top layer in size of fine cut and well dressed in Grey colour in paving on a bed of min. 40 mm thick cushioning in C.M. 1:4 including neat cement float etc. filling of joints in C.M. 1:2 with grey cement to match the colour of cobble stone in the required pattern, design and as directed by the Engineer incharge, including cleaning, curing etc. complete.

Supplying and fixing Pre-cast cement concrete kerb-stones (factory made,the factory should be ISO certified and registered under Dirctorate of Industries, Govt. of India) of M-20 with 20 mm nominal size granitic/basaltic aggregate properly consolidated by mechanical plat-form and vibrators with smooth finish including fixing at site complete as per specification. Size 60 cm L x45 cm H x 15 cm T

Providing and laying of hot applied thermoplastic compound 2.5 mm thick including Reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC 35. The finished surface to be level uniform and free from streaks and holes as per MoRT & H Specification 803

Supplying and stacking of good earth ( Garden Soil) at site including royalty and carriage upto 1 km. (earth measured in stacks will be reduced by 20% for payment).

Spreading of sludge, dung manure or/and good earth (Garden Soil) in required thickness (cost of sludge, dung manure or/and good earth to be paid separately).

Supply at site of work/store deoiled Neem cake duly packed in used gunny bags as per MoRT & H Specification 308.2

Supplying of sludge duly stacked at site/store as per MoRT & H Specification 308.2

Filling mixture of earth & sludge or manure in the desired proportion in trenches flooding with water and leveling (cost of supplying earth and sludge or manure and mixing excluded).

PLUMBING WORKS

Providing and fixing white vitereous china pedestal type (Europen type) water closet with seat as lid, whth C.I. brass hinges and rubber fitings 15 lts white vitreous china low level flushing cistern with fittings as brackets 40 mm white precelain 3enameled flush bad, 25 mm overflow pipe with specials and mosquito proof coupling of approved municipal design complete, including cutting and making good the walls and floors where required. W.C. pan with white plastic seat and lid

Providing and fixing Hand Shower (Health Faucet) with 8mm dia, ABS/brass body with double lock 1.00m long Flexible tube (Brass plated stainles steel flexible hose) and wall hook/holder of approved quality confirming to IS standards.

Providing and fixing NICKEL chrome plated copper alloy Fancy Two Way Bib Cock with single knob and wall flange conforming to IS8931:1993 15mm nominal bore.

Providing and fixing toilet paper holder : C.P. brass

Providing and fixing approved make table top / undercounter Wash hand basin with tap hole - white vitreous china of size 370 X 480 mm including Pillar tap , 32 mm C.P.Waste coupling, bottle trap, CP angle valve (1No), PVC flexible pipe inlet connection and C.P.Wall Flange complete with necessary bolts, bents, tees, brass screws including cutting of granite, making holes in the wall if required and making the surface good to the satisfaction of Engineer.

Providing and fixing vitreous china wash basin with RS or C.I. brackets painted white, 15 mm C.P. brass pillar taps C.P. brass chain with rubber plug 32 mm C.P. brass waste of pattern, 32 mm diameter M.I. or C.P. brass trap and union complete, including cutting and making good the walls where required. Flat back wash basin size 630x 450mm with a single 15 mm C.P. brass pillar taps.

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430 x 260 x 350 mm and 340 x 430 x 265 mm sizes respectively with pvc automatic flushing cistern with fittings, R.S. or C.I. brackets, standard size galvanised steel flush pipe and spreaders with brass unions & G.I. clamps complete, including painting of cister and fittings, cutting and making good the walls and floors where required. a.One urinal basin with 5 litres p .v .c. automatic flushing cistern.

Proving and fixing kitchen sink with R.S. or C.I. brackets C.P. brass chain with rubber plug 40 mm C.P. brass waste and 40mm M.I. or C.P. brass trap necessary unions complete, including painting the fittings, cutting and making good the walls where required. White vitreous china sink size 600 x 450 x 200 mm

Providing and fixing NICKEL chrome plated copper alloy Fancy sink mixer with U shape swinging casted spout Jaquar make or equivalent. Confirming to IS 8931;1993

Providing & fixing liquid soap container with C. P. brass lid and brackets fixed to wooden cleats with C. P. brass screws Plastic container

Providing and fixing Grab Bar (JAQUAR or equivalent) Size: 600mm long for handicap toilet.

Providing and fixing Grab Bar (JAQUAR or equivalent) of size: 300mm long for handicap toilets.

Providing and fixing nahani trap of rigid PVC (approved make ) for S.W.R. pipes including lubricating etc complete, without door : 110mm

Providing and fixing nahani trap of rigid PVC (approved make ) for S.W.R. pipes including lubricating etc complete, without door : 75mm

Providing & fixing Stainless steel with perforated / plane cover Nahani trap for wash basins, shower, sinks, etc, with all necessary cutting, filling, fixing & making good the services, etc,complete. Top grating Size in mm - 100 x 100, 110 mm (With perforated grating)

Providing & fixing Stainless steel with perforated / plane cover Nahani trap for wash basins, shower, sinks, etc, with all necessary cutting, filling, fixing & making good the services, etc,complete. Top grating Size in mm - 100 x 100, 110 mm (With plane cover)

Providing and fixing Angular Stop Cock with wall Flangue - Jaquar make or equavalent. (a)15mm of approved make quality.

Supplying and erecting inbuilt water cooler with RO+UV water purifier with softener for safe drinking water operating on 230V, Storage capacity:150Litres, Purification Capacity:50 LPH, single phase A.C. supply with UV fail & filter change indication system cooling capacity

Providing & fixing fully automatic "NO TOUCH" satin finish stainless steel AISI 316 grade wall mounted hand drier suitable to operate on 240 volts, single phase 50 hz, A.C. power supply, ( motor rating 100W, 2850 rpm automatic infrared sensing device, 1600W heating element approximate 275 cum/hr air flow wind velocity 15.5 m/sec or as per Manufacturer's specifications).

Providing and fixing chlorinated ployvinyl chloride (CPVC) pipes confirming to IS:15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1 mt. spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of the Engineer-in-charge. Concealed work (medium duty SDR 13.5 pipe) including cutting chases and making good the walls etc. 15 mm outer dia CPVC pipe

Providing and fixing chlorinated ployvinyl chloride (CPVC) pipes confirming to IS:15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1 mt. spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of the Engineer-in-charge. Concealed work (medium duty SDR 13.5 pipe) including cutting chases and making good the walls etc. 20 mm outer dia CPVC pipe

Providing and fixing chlorinated ployvinyl chloride (CPVC) pipes confirming to IS:15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1 mt. spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of the Engineer-in-charge. Concealed work (medium duty SDR 13.5 pipe) including cutting chases and making good the walls etc. 25 mm outer dia CPVC pipe

Providing and fixing chlorinated ployvinyl chloride (CPVC) pipes confirming to IS:15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1 mt. spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of the Engineer-in-charge. Concealed work (medium duty SDR 13.5 pipe) including cutting chases and making good the walls etc. 32 mm outer dia CPVC pipe

Providing and fixing chlorinated ployvinyl chloride (CPVC) pipes confirming to IS:15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1 mt. spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of the Engineer-in-charge. 40 mm outer dia CPVC pipe

Providing and fixing chlorinated ployvinyl chloride (CPVC) pipes confirming to IS:15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1 mt. spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of the Engineer-in-charge. 50 mm outer dia CPVC pipe

Providing and fixing ASTM UPVC pipe, conforming to ASTM 2467 with ISO 14001, including all UPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step UPVC solvent cement and testing of joints complete as per direction of Engineer. Internal work - Exposed on wall. SCH-80(blue)/(white) 20mm outer dia.

Providing and fixing ASTM UPVC pipe, conforming to ASTM 2467 with ISO 14001, including all UPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step UPVC solvent cement and testing of joints complete as per direction of Engineer. Internal work - Exposed on wall. SCH-80(blue)/(white) 25mm outer dia.

Providing and fixing ASTM UPVC pipe, conforming to ASTM 2467 with ISO 14001, including all UPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step UPVC solvent cement and testing of joints complete as per direction of Engineer. Internal work - Exposed on wall. SCH-80(blue)/(white) 32mm outer dia.

Providing and fixing ASTM UPVC pipe, conforming to ASTM 2467 with ISO 14001, including all UPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step UPVC solvent cement and testing of joints complete as per direction of Engineer. Internal work - Exposed on wall. SCH-80(blue)/(white) 40mm outer dia.

Providing and fixing ASTM UPVC pipe, conforming to ASTM 2467 with ISO 14001, including all UPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step UPVC solvent cement and testing of joints complete as per direction of Engineer. Internal work - Exposed on wall. SCH-80(blue)/(white) 50mm outer dia.

Providing and fixing ASTM UPVC pipe, conforming to ASTM 2467 with ISO 14001, including all UPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step UPVC solvent cement and testing of joints complete as per direction of Engineer. Internal work - Exposed on wall. SCH-80(blue)/(white) 63mm outer dia.

Providing and fixing ASTM UPVC pipe, conforming to ASTM 2467 with ISO 14001, including all UPVC plain & brass threaded fittings, including jointing of pipes & fittings with one step UPVC solvent cement, trenching ,refilling & testing of joints complete as per direction of Engineer. (Underground pipe) SCH-80(blue)/(white) 20mm outer dia.

Providing and fixing ASTM UPVC pipe, conforming to ASTM 2467 with ISO 14001, including all UPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step UPVC solvent cement and testing of joints complete as per direction of Engineer. Internal work - Exposed on wall. SCH-80(blue)/(white) 25mm outer dia.

Providing and fixing ASTM UPVC pipe, conforming to ASTM 2467 with ISO 14001, including all UPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step UPVC solvent cement and testing of joints complete as per direction of Engineer. Internal work - Exposed on wall. SCH-80(blue)/(white) 32mm outer dia.

Providing and fixing ASTM UPVC pipe, conforming to ASTM 2467 with ISO 14001, including all UPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step UPVC solvent cement and testing of joints complete as per direction of Engineer. Internal work - Exposed on wall. SCH-80(blue)/(white) 40mm outer dia.

Providing and fixing ASTM UPVC pipe, conforming to ASTM 2467 with ISO 14001, including all UPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step UPVC solvent cement and testing of joints complete as per direction of Engineer. Internal work - Exposed on wall. SCH-80(blue)/(white) 50mm outer dia.

Providing and fixing ASTM UPVC pipe, conforming to ASTM 2467 with ISO 14001, including all UPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step UPVC solvent cement and testing of joints complete as per direction of Engineer. Internal work - Exposed on wall. SCH-80(blue)/(white) 63mm outer dia.

Providing and fixing ASTM UPVC pipe, conforming to ASTM 2467 with ISO 14001, including all UPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step UPVC solvent cement and testing of joints complete as per direction of Engineer. Internal work - Exposed on wall. SCH-80(blue)/(white) 75mm outer dia.

Providing and fixing ASTM UPVC pipe, conforming to ASTM 2467 with ISO 14001, including all UPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step UPVC solvent cement and testing of joints complete as per direction of Engineer. Internal work - Exposed on wall. SCH-80(blue)/(white) 90mm outer dia.

Providing and fixing of ABS Nozzles for folloWing flow rates along with all acessories:(Flow rate-9cu.m./hr

Providing, fixing, jointing and testing of UPVC Agri pipes confirming to IS : 4985 (Pipe Class III - 6 kg / sq.cm) cut to required lengths including all necessary fittings and specials such as bends, junctions offsets, access pieces (plain or door) & vent cowl with Solvent Joint, including openings in wall, corecuting in rcc structure & refurnish the same Fixing at wall / ceiling level supported by clamps, MS supports, hangers etc 100mm outer dia.

Providing, fixing, jointing and testing of UPVC Agri pipes confirming to IS : 4985 (Pipe Class III - 6 kg / sq.cm) cut to required lengths including all necessary fittings and specials such as bends, junctions offsets, access pieces (plain or door) & vent cowl with Solvent Joint, including openings in wall, corecuting in rcc structure & refurnish the same Fixing at wall / ceiling level supported by clamps, MS supports, hangers etc 160mm outer dia.

Providing and fixing SS Decorative drain covers with frame including laser cutting, welding and all accessories required for storm warer channel 300mm Width & 0.6m length

Supplying & fixing FRP Trench Cover grating with frame to suit the clear span of the gutter. Thickness of the FRP perforated trench cover suitable for Heavy duty load application. etc. complete as per direction of engineer in charge 300mm Width

Providing and fixing rigid PVC S.W. R. (soil, waste and rain water drainage pipes of approved make including lubricant etc. complete (single/double) socket-ed : 110mm dia

Providing and fixing rigid PVC S.W. R. (soil, waste and rain water drainage pipes of approved make including lubricant etc. complete (single/double) socket-ed : 75mm

Providing and fixing on walls /ceiling/ floor 40 mm dia. uPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existingpipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete

Providing and fixing on walls/ ceiling/ floor 50 mm dia. uPVC pipe with necessary fittings, remaking good the demolished portion etc. complete

Providing and fixing rigid PVC bend of required degree (of approved make) for S.W.R. drainage pipes of approved including lubricating. 110mm

Providing and fixing rigid PVC bend of required degree (of approved make) for S.W.R. drainage pipes of approved including lubricating. 75mm

Providing and fixing rigid PVC bend (approved make ) for S.W.R. pipes including lubricating etc complete bend with door : 110mm

Providing and fixing rigid PVC bend (approved make ) for S.W.R. pipes including lubricating etc complete bend with door : 75mm

Providing and fixing single Tee of rigid PVC (approved make ) for S.W.R. pipes including lubricating etc complete, with door : 110mm

Providing and fixing single Tee of rigid PVC (approved make ) for S.W.R. pipes including lubricating etc complete, with door : 75mm

Providing and fixing single “Y” of rigid PVC (approved make ) for S.W.R. pipes including lubricating etc complete, without door 110mm

Providing and fixing single “Y” of rigid PVC (approved make ) for S.W.R. pipes including lubricating etc complete, without door 75mm

Providing and fixing R.P.V.C. vent cowl: 110mm

Providing and fixing R.P.V.C. vent cowl: 75mm

Providing at store or site work non-pressure RCC pipes of with collar joints conforming to IS:458-2003 revised as per amendment No.11 , including freight, carting, loading, unloading, stacking etc. Complete. II)NP3 Class 150

Providing at store or site work non-pressure RCC pipes of with collar joints conforming to IS:458-2003 revised as per amendment No.11 , including freight, carting, loading, unloading, stacking etc. Complete. II)NP3 Class 250

Providing at store or site work non-pressure RCC pipes of with collar joints conforming to IS:458-2003 revised as per amendment No.11 , including freight, carting, loading, unloading, stacking etc. Complete. II)NP3 Class 300

Conveying carefully from stack at site, 250m from both sides rolling and lowering into trenches, laying and jointing true to line and level, RCC spun pressure and non pressure pipes of various classes, specials including collar and perfect linking of joint with jack to correct position including cost of jointing material in cement mortar 1:2, necessary hydraulic testing, curing of cement mortar etc. complete. 150

Conveying carefully from stack at site, 250m from both sides rolling and lowering into trenches, laying and jointing true to line and level, RCC spun pressure and non pressure pipes of various classes, specials including collar and perfect linking of joint with jack to correct position including cost of jointing material in cement mortar 1:2, necessary hydraulic testing, curing of cement mortar etc. complete. 250

Conveying carefully from stack at site, 250m from both sides rolling and lowering into trenches, laying and jointing true to line and level, RCC spun pressure and non pressure pipes of various classes, specials including collar and perfect linking of joint with jack to correct position including cost of jointing material in cement mortar 1:2, necessary hydraulic testing, curing of cement mortar etc. complete. 300

Construction of manhole rectangular in shape including cement concrete 1:3:6 (1 cement:3 coarse sand:6 graded stone aggregate 20mm nominal size) foundation thickness of concrete 20cms and offset 10cms on both sides and first class brick work with bricks class designation 100kg/sq.cm (wire cut bricks) cement mortar 1:3 (1 cement : 3 coarse sand) 23cms thick including providing & fixing CI footrests confirming to IS 5445/69 or revised and whose weight shall not be less than 5.30kgs including fixing in man-hole at 30cm c / c in 20x 20x10cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) and 12mm thick plaster inside and outside with cement mortar 1:3 (1 cement : 3 coarse sand) including adding waterproofing compound of approved brand in cement mortar with a floating coat of neat cement and making channel in cement concrete 1:2:4 (1 cement :2 coarse sand : 4 graded stone aggregate 20m nominal size) neatly finished complete as per standard design. (For sewer) Inside size 0.90 x 0.60m and 1.00m deep ( with medium duty DI manhole cover & frame of size 0.90x 0.60m weighing 105 kgs including fixing with cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size and applying the frame & cover with coal tar.

Construction of manhole rectangular in shape including cement concrete 1:3:6 (1 cement:3 coarse sand:6 graded stone aggregate 20mm nominal size) foundation thickness of concrete 20cms and offset 10cms on both sides and first class brick work with bricks class designation 100kg/sq.cm (wire cut bricks) cement mortar 1:3 (1 cement : 3 coarse sand) 23cms thick including providing & fixing CI footrests confirming to IS 5445/69 or revised and whose weight shall not be less than 5.30kgs including fixing in man-hole at 30cm c / c in 20x 20x10cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) and 12mm thick plaster inside and outside with cement mortar 1:3 (1 cement : 3 coarse sand) including adding waterproofing compound of approved brand in cement mortar with a floating coat of neat cement and making channel in cement concrete 1:2:4 (1 cement :2 coarse sand : 4 graded stone aggregate 20m nominal size) neatly finished complete as per standard design. (For sewer) Inside size 0.60x0.60m and 0.60m deep (with medium duty DI manhole cover & frame of size 0.60x 0.60m weighing 90kgs ) including fixing with cement concrete 1:2:4 ( 1 cement :2 coarse sand : 4 graded stone aggregate 20mm nominal size and applying the frame & cover with coal tar.

Extra/Additional depth of above square/ rectangular manholes at above item no.infractions with 100kg/sq.cm(wire cut bricks) brickwork in cement mortar 1:3 (1cement:3coarse sand) 23cm thick including providing and fixing CI footrests not weighing less than 5.30kgs incl. fixing in manholes @ 30cmc/c staggered in 20x20x10cm cement concrete blocks 1:3:6(1cement:3coarse sand :6graded stone aggregate 20mm nominal size) 12mm thick plaster inside and outside with cement mortar 1:3 (1cement :3coarse sand)including adding water proofing compound of approved brand with a floating coat of neat cement.(For sewer & storm) 0.90 x 0.60m Manholes.

Extra/Additional depth of above square/ rectangular manholes at above item no.infractions with 100kg/sq.cm(wire cut bricks) brickwork in cement mortar 1:3 (1cement:3coarse sand) 23cm thick including providing and fixing CI footrests not weighing less than 5.30kgs incl. fixing in manholes @ 30cmc/c staggered in 20x20x10cm cement concrete blocks 1:3:6(1cement:3coarse sand :6graded stone aggregate 20mm nominal size) 12mm thick plaster inside and outside with cement mortar 1:3 (1cement :3coarse sand)including adding water proofing compound of approved brand with a floating coat of neat cement.(For sewer & storm) 0.60 x 0.60m Manholes.

Providing and fixing square mouth S.W. gully trap grade 'A" complete with C.I. Grading brick masonry chamber and water light C.I. cover with frame 300x300mm size (inside) the weight of the cover to be not less than 4.53kg and frame to be not less than 2.72kg as per standard design. 150 mmx 100mm P or Stype

Construction of manhole conical in shape including cement concrete 1:2:4 ( 1 cement:2coarse sand:4 graded stone aggregate 20mm nominal size) foundation thickness of concrete 25cms and offset 15cms on both sides and first class brick work with bricks class designation 100kg/sq.cm(wire cut bricks) in cement mortar 1:3 (1 cement : 3 coarse sand) 35cms thick including providing & fixing CI footrests confirming to IS 5445/69 or revised and whose weight shall not be less than 5.30kgs including fixing in man-hole at 30cm c/c in 20 x 20 x 10cm cement concrete block 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) and 12mm thick plaster inside and outside with cement mortar 1:3 (1 cement : 3 coarse sand) including adding waterproofing compound of approved brand in cement mortar with a floating coat of neat cement and making channel in cement concrete 1:2:4 ( 1 cement :2 coarse sand : 4 graded stone aggregate 20m nominal size) neatly finished including providing and fixing manhole cover and frame in cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) complete as per standard design.(For sewer) Supply of 500mm dia heavy duty solid type C.I. circular cover and frame weighing not less than 230 kgs. 0.90m dia (a) 1.00m deep

Construction of manhole conical in shape including cement concrete 1:2:4 ( 1 cement:2coarse sand:4 graded stone aggregate 20mm nominal size) foundation thickness of concrete 25cms and offset 15cms on both sides and first class brick work with bricks class designation 100kg/sq.cm(wire cut bricks) in cement mortar 1:3 (1 cement : 3 coarse sand) 35cms thick including providing & fixing CI footrests confirming to IS 5445/69 or revised and whose weight shall not be less than 5.30kgs including fixing in man-hole at 30cm c/c in 20 x 20 x 10cm cement concrete block 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) and 12mm thick plaster inside and outside with cement mortar 1:3 (1 cement : 3 coarse sand) including adding waterproofing compound of approved brand in cement mortar with a floating coat of neat cement and making channel in cement concrete 1:2:4 ( 1 cement :2 coarse sand : 4 graded stone aggregate 20m nominal size) neatly finished including providing and fixing manhole cover and frame in cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) complete as per standard design.(For sewer) Supply of 500mm dia heavy duty solid type C.I. circular cover and frame weighing not less than 230 kgs. 0.90m dia (a) 1..50m deep

Providing and fixing brass full way valve (heavy) duty with wheel of approved quality : 15mm nominal bore

Construction of manhole conical in shape including cement concrete 1:2:4 ( 1 cement:2coarse sand:4 graded stone aggregate 20mm nominal size) foundation thickness of concrete 25cms and offset 15cms on both sides and first class brick work with bricks class designation 100kg/sq.cm(wire cut bricks) in cement mortar 1:3 (1 cement : 3 coarse sand) 35cms thick including providing & fixing CI footrests confirming to IS 5445/69 or revised and whose weight shall not be less than 5.30kgs including fixing in man-hole at 30cm c/c in 20 x 20 x 10cm cement concrete block 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) and 12mm thick plaster inside and outside with cement mortar 1:3 (1 cement : 3 coarse sand) including adding waterproofing compound of approved brand in cement mortar with a floating coat of neat cement and making channel in cement concrete 1:2:4 ( 1 cement :2 coarse sand : 4 graded stone aggregate 20m nominal size) neatly finished including providing and fixing manhole cover and frame in cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) complete as per standard design.(For sewer) Supply of 500mm dia heavy duty solid type C.I. circular cover and frame weighing not less than 230 kgs. 0.90m dia 20 mm nominal bore .

Construction of manhole conical in shape including cement concrete 1:2:4 ( 1 cement:2coarse sand:4 graded stone aggregate 20mm nominal size) foundation thickness of concrete 25cms and offset 15cms on both sides and first class brick work with bricks class designation 100kg/sq.cm(wire cut bricks) in cement mortar 1:3 (1 cement : 3 coarse sand) 35cms thick including providing & fixing CI footrests confirming to IS 5445/69 or revised and whose weight shall not be less than 5.30kgs including fixing in man-hole at 30cm c/c in 20 x 20 x 10cm cement concrete block 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) and 12mm thick plaster inside and outside with cement mortar 1:3 (1 cement : 3 coarse sand) including adding waterproofing compound of approved brand in cement mortar with a floating coat of neat cement and making channel in cement concrete 1:2:4 ( 1 cement :2 coarse sand : 4 graded stone aggregate 20m nominal size) neatly finished including providing and fixing manhole cover and frame in cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) complete as per standard design.(For sewer) Supply of 500mm dia heavy duty solid type C.I. circular cover and frame weighing not less than 230 kgs. 0.90m dia 25 mm nominal bore .

Construction of manhole conical in shape including cement concrete 1:2:4 ( 1 cement:2coarse sand:4 graded stone aggregate 20mm nominal size) foundation thickness of concrete 25cms and offset 15cms on both sides and first class brick work with bricks class designation 100kg/sq.cm(wire cut bricks) in cement mortar 1:3 (1 cement : 3 coarse sand) 35cms thick including providing & fixing CI footrests confirming to IS 5445/69 or revised and whose weight shall not be less than 5.30kgs including fixing in man-hole at 30cm c/c in 20 x 20 x 10cm cement concrete block 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) and 12mm thick plaster inside and outside with cement mortar 1:3 (1 cement : 3 coarse sand) including adding waterproofing compound of approved brand in cement mortar with a floating coat of neat cement and making channel in cement concrete 1:2:4 ( 1 cement :2 coarse sand : 4 graded stone aggregate 20m nominal size) neatly finished including providing and fixing manhole cover and frame in cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) complete as per standard design.(For sewer) Supply of 500mm dia heavy duty solid type C.I. circular cover and frame weighing not less than 230 kgs. 0.90m dia 32 mm nominal bore .

Construction of manhole conical in shape including cement concrete 1:2:4 ( 1 cement:2coarse sand:4 graded stone aggregate 20mm nominal size) foundation thickness of concrete 25cms and offset 15cms on both sides and first class brick work with bricks class designation 100kg/sq.cm(wire cut bricks) in cement mortar 1:3 (1 cement : 3 coarse sand) 35cms thick including providing & fixing CI footrests confirming to IS 5445/69 or revised and whose weight shall not be less than 5.30kgs including fixing in man-hole at 30cm c/c in 20 x 20 x 10cm cement concrete block 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) and 12mm thick plaster inside and outside with cement mortar 1:3 (1 cement : 3 coarse sand) including adding waterproofing compound of approved brand in cement mortar with a floating coat of neat cement and making channel in cement concrete 1:2:4 ( 1 cement :2 coarse sand : 4 graded stone aggregate 20m nominal size) neatly finished including providing and fixing manhole cover and frame in cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) complete as per standard design.(For sewer) Supply of 500mm dia heavy duty solid type C.I. circular cover and frame weighing not less than 230 kgs. 0.90m dia 40 mm nominal bore .

Construction of manhole conical in shape including cement concrete 1:2:4 ( 1 cement:2coarse sand:4 graded stone aggregate 20mm nominal size) foundation thickness of concrete 25cms and offset 15cms on both sides and first class brick work with bricks class designation 100kg/sq.cm(wire cut bricks) in cement mortar 1:3 (1 cement : 3 coarse sand) 35cms thick including providing & fixing CI footrests confirming to IS 5445/69 or revised and whose weight shall not be less than 5.30kgs including fixing in man-hole at 30cm c/c in 20 x 20 x 10cm cement concrete block 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) and 12mm thick plaster inside and outside with cement mortar 1:3 (1 cement : 3 coarse sand) including adding waterproofing compound of approved brand in cement mortar with a floating coat of neat cement and making channel in cement concrete 1:2:4 ( 1 cement :2 coarse sand : 4 graded stone aggregate 20m nominal size) neatly finished including providing and fixing manhole cover and frame in cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) complete as per standard design.(For sewer) Supply of 500mm dia heavy duty solid type C.I. circular cover and frame weighing not less than 230 kgs. 0.90m dia 50 mm nominal bore .

Construction of manhole conical in shape including cement concrete 1:2:4 ( 1 cement:2coarse sand:4 graded stone aggregate 20mm nominal size) foundation thickness of concrete 25cms and offset 15cms on both sides and first class brick work with bricks class designation 100kg/sq.cm(wire cut bricks) in cement mortar 1:3 (1 cement : 3 coarse sand) 35cms thick including providing & fixing CI footrests confirming to IS 5445/69 or revised and whose weight shall not be less than 5.30kgs including fixing in man-hole at 30cm c/c in 20 x 20 x 10cm cement concrete block 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) and 12mm thick plaster inside and outside with cement mortar 1:3 (1 cement : 3 coarse sand) including adding waterproofing compound of approved brand in cement mortar with a floating coat of neat cement and making channel in cement concrete 1:2:4 ( 1 cement :2 coarse sand : 4 graded stone aggregate 20m nominal size) neatly finished including providing and fixing manhole cover and frame in cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) complete as per standard design.(For sewer) Supply of 500mm dia heavy duty solid type C.I. circular cover and frame weighing not less than 230 kgs. 0.90m dia 65 mm nominal bore .

Construction of manhole conical in shape including cement concrete 1:2:4 ( 1 cement:2coarse sand:4 graded stone aggregate 20mm nominal size) foundation thickness of concrete 25cms and offset 15cms on both sides and first class brick work with bricks class designation 100kg/sq.cm(wire cut bricks) in cement mortar 1:3 (1 cement : 3 coarse sand) 35cms thick including providing & fixing CI footrests confirming to IS 5445/69 or revised and whose weight shall not be less than 5.30kgs including fixing in man-hole at 30cm c/c in 20 x 20 x 10cm cement concrete block 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) and 12mm thick plaster inside and outside with cement mortar 1:3 (1 cement : 3 coarse sand) including adding waterproofing compound of approved brand in cement mortar with a floating coat of neat cement and making channel in cement concrete 1:2:4 ( 1 cement :2 coarse sand : 4 graded stone aggregate 20m nominal size) neatly finished including providing and fixing manhole cover and frame in cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) complete as per standard design.(For sewer) Supply of 500mm dia heavy duty solid type C.I. circular cover and frame weighing not less than 230 kgs. 0.90m dia 80 mm nominal bore .

Supplying at store or site of work including railway freight, carting, loading, unloading, stacking etc. C. I. Butterfly (tight shut off) valve with cast iron body conforming IS:210 FIG. 260 and disc shafts seal rings, clamping ring, nitrite rubber seal leaded bronze bearings manually operated complete conforming to BS:5155/IS:13095 etc. complete. TYPE P.N. 1.0 (Class B ) 100mm

Supplying at store or site of work including railway freight, carting, loading, unloading, stacking etc. C. I. Butterfly (tight shut off) valve with cast iron body conforming IS:210 FIG. 260 and disc shafts seal rings, clamping ring, nitrite rubber seal leaded bronze bearings manually operated complete conforming to BS:5155/IS:13095 etc. complete. TYPE P.N. 1.0 (Class B ) 150mm

Providing and fixing non-return valve of approved quality : 25 mm nominal bore

Providing and fixing non-return valve of approved quality : 32 mm nominal bore

Providing and fixing non-return valve of approved quality : 40 mm nominal bore

Providing and fixing non-return valve of approved quality : 50 mm nominal bore

Providing and fixing non-return valve of approved quality : 65mm nominal bore

Providing and fixing non-return valve of approved quality : 80 mm nominal bore

C.I. Stainer 'T' (Basket) type with flanged ends and with stainless steel or Brass mesh with opening of 2.5mm to 3mm and suitable for operating pressure of 16 kg/cm² and test pressure of 24 kg/cm² C.I. Stainer 'T' (Basket) type with flanged ends Sizes in mm 50

C.I. Stainer 'T' (Basket) type with flanged ends and with stainless steel or Brass mesh with opening of 2.5mm to 3mm and suitable for operating pressure of 16 kg/cm² and test pressure of 24 kg/cm² C.I. Stainer 'T' (Basket) type with flanged ends Sizes in mm 80

Supplying & erecting Dewatering Monoblock pump set including electrical Panel 415V, 3 phase, 50C/s, A.C. supply of 2.25KW/ 3 H.P., of 12 to 26 m head with 560 to 70 LPM discharge, 10.5mm Solid Handling Capacity, non clogging minimised abrasive wear, large impeller clearance & maintenance free pump set with water proof cable duly sealed with epoxy material built in protection to prevent the motor from burn out due to abnormal operation. specially designed high efficiency motor with F class insulation & the pump mechanically sealed in the oil chamber,. etc. complete as per specification (1W)

STP (MBBR PROCESS) Supplying & Fixing Prefabricated Sewage Treatment plant of 32 kld with opearting 20 hours of operating,with preatrement which includes screening,oil & grease trap,equlization tank,secondary treatment which inlides bilogical treatment ,tube settler & disinfecation and sludge disposal sytem,Tertiary treatment as water paased thrugh series of filters,PLANT CAPACITY: 32 KLD OPERATING DURATION - 20 HRS PROCESS: MBBR Note - 1.Stp to treated water tank parameters should meet environment standards. 2.STP Vendor need to take all statutory approval regarding environmental clerance. 3.STP vendor need to quote for all electromechanical equipment plus civil cost of all tanks.Tanks & Civil tank details are as follows.Tanks & Civil tank details are as follows.Perforated screen in MS epoxy construction Oil & grease trap chamber in civil Equalization tank in civil MBBR reactors – in pre fab MSEP Tube Settler – in pre fab MSEP Clear water tank/filter feed tank – in pre fab MSEP Treated water tank – in civil Sludge holding tank – in civil Sewage transfer pumps – Self priming, non-clog, centrifugal Air blower with motor, diffuser membrane & associated equipment’s Tube media for Tube settler Poly dosing system Chlorine dosing system Filter feed pump Pressure sand filter Activated Carbon filter Interconnecting pipe & fitting Sludge pump Electrical panel & equipment Ozonation

Supply of Organic biodegradable waste to convert into rich compost. The composting machines consists of shredder and mixer for simultaneously mixing and shredding of waste in uniform size. The machine also mixes the composting,culture and dry material such as dry leaves, saw dust, etc. with the shredded waste for absorption of,excess moisture. The mixture is further cured in bins to form rich compost. 160kg/day Fully Automatic Compact Design Compact Design Converts any kind of Organic Waste into Compost Overload Function works in case of Overload,Reduces Global Warming and Air Pollution Body Material SS304, 1.2mm thick Chamber Material SS304, 2mm thick,Shaft Material SS304 Control System PLC based Composting method Micro- organism based natural composting Treatable items Fruits, Fruit peels, Vegetables, Fish, Fish bones, Bread, Tree Leaves, Processing Time 24-48 Hours Output Organic Manure/Compost Note: Equipment capacity should be 30 kg per day. Air exchange should be adequately available for composting as well to get dry manure. Equipment should be suitable for solid waste as well liquid waste. Shredder is required Drum shall be FRP coated or any suitable material coating to prevent from rust. Drum rotation motor-gear box should be from reputed make. Feeding point/inlet point should be at working height. Easy to operate and easy to maintain. Saw dust & waste mixing shall be inside drum/container. No outside preparation.

RWH - Recharge Pit Providing and constructing recharge pit of 2.0m deep and 1.0m dia of pre-cast RCC rings with 6.5" dia x 25m deep borewell at the floor of recharge pit including installation of combination of solid/perforated PVC casing pipe wrapped around with netlon mesh including 300mm thick sidefilling around outside of RCC rings (annular space) with 40mm size boulders including filling of recharge pit up to 0.5m depth with 25-75mm clean washed gravels from bottom up followed by 0.5m depth of 10- 25mm of clean washed stones followed by 0.5m of washed river fine aggregate (natural sand/crushed sand VSI grade finely washed etc.) including netlon mesh between each gravel/fine aggregate (natural sand/crushed sand VSI grade finely washed etc.) media layer including covering with RCC slab, manhole frame & cover, PVC rungs, PVC end caps, fittings etc. including arrangement for inlet & outlet pipe excavation & backfilling as shown in the drawing.The rate shall be inclusive of all labour, material, wastage, scaffolding, transportation, taxes, including all leads, lifts at all levels. All material should be of approved make. All works complete as per the drawing, technical specification and direction of the Engineer in charge.

Supplying and fixing C.I. cover without frame for manholes: (FOR OHT & UGR) 445x610 mm rectangular C.I. cover (light duty) weight of cover to be not less than 23 kg.

Supply of inferential, dry dial, type Domestic Water Meter, suitable for horizontal installation, duly, sealed against tampering with couplings at both ends having pulse output facility compatible for automatic reading system ,conforming to IS:779-1974 and ISO 4064-2005 standards -pre equipped for AMR IP-68 with copper can register bearing MID /OIML mark (with latest Amendments) along with valid life test /type test certificate from FCRI or Test certificate from as NABL desired by the department. Class B-Multi Jet Water meters- 50

Fixing of water meter including providing and laying of pipeline, including threading, laying and jointing of pipes inside the meter box with necessary fittings( four elbows and one union joint) in "U "shape( vertical side of U measuring 15cms and Horizontal side of U having 0.55 or more as required), conforming to IS 2401-1973 specification in meter for installation of meter including making holes in the masonry of the meter box but excluding cost of meter and valves, at various scattered locations as directed by the Engineer in-charge. a. with G.I pipes and fittings, 25 mm nominal diameter

Providing M.S. footrests including fixing in manholes with 20 x 20 x 10 cm cement concrete block 1:3:6 (1 cement :3 coarse sand :6 graded stone aggregate 20 mm nominal size) as per standard design : With 20 x 20 mm square or round bar

Supplying at store or site of work including railway freight, carting, loading, unloading, stacking etc. C. I. single large orifice air valve(fig S2confirming to IS 14848/2000 with suitable connections as directed by Engineer -In- Charge for working pressure of 10kg/sq.cm. (Class B) Dia in mm 25

Fixing C.I. Single large orifice air valve of similar make with bronze ferrule at inlet screwed suitable to working pressure of 15kg/sq. cm for 12 mm to 20mm and 10kg/sq. cm for 25mm to 50mm, complete, as directed by the Engineer in- charge, of following sizes. Nominal diameter in mm. 25

Providing and fixing ball valve ( brass ) of approved quality: High pressure with PVC floats 25 mm nominal bore

Providing & Fixing in position G.I. Pipe puddle flange inserts of 4mm thick as per drg. Appx length of insert is 800mm, with both ends threaded 65mm, 40 mm dia.

Providing & Fixing in position G.I. Pipe puddle flange inserts of 4mm thick as per drg. Appx length of insert is 800mm, with both ends threaded 65mm, 50 mm dia.

Providing & Fixing in position G.I. Pipe puddle flange inserts of 4mm thick as per drg. Appx length of insert is 800mm, with both ends threaded 65mm, 65 mm dia.

Providing & Fixing in position G.I. Pipe puddle flange inserts of 4mm thick as per drg. Appx length of insert is 800mm, with both ends threaded 65mm, 80 mm dia.

Providing & Fixing in position G.I. Pipe puddle flange inserts of 4mm thick as per drg. Appx length of insert is 800mm, with both ends threaded 65mm, 100 mm dia.

Providing & Fixing in position G.I. Pipe puddle flange inserts of 4mm thick as per drg. Appx length of insert is 800mm, with both ends threaded 65mm, 150 mm dia.

Providing & Fixing in position G.I. Pipe puddle flange inserts of 4mm thick as per drg. Appx length of insert is 800mm, with both ends threaded 65mm, 200 mm dia.

Hydropneumatic System:Supply, installation, testing & commissioning of Hydro-pneumatic system with 3 nos. vertical in-line pumps complete in SS coupled with tEFC motor., suitable for operation on 415 volts, 50 Hz, 3 phase AC supply, with required Ltrs pneumatic pressure tank, mounting skid (if required for Control Panel), foot valves, G.I. suction & discharge pipes, fittings, cast iron / brass valves, C.I. Strainers at suction head, etc. The scope includes pressure switches, VFD based control panel with starters, protections, relays, cables, interlocking with level & pressure switches. Suction / Delivery Piping all connections, etc complete for domestic supply only. SCOPE:The item includes Pressure vessels, pressure switches, gauges, pressure transmitter on delivery manifold, pump suction & delivery piping, manifolds & valves, flexible bellows, Fixed speed/variable frequency drive, control panels, Microprocessor based operation)and all accessories including installation, testing & commissioning INSPECTION & TESTING:For electrical accessories, necessary tests shall be performed or factory test certificate shall be furnished.SYSTEM DESCRIPTION CONTROL PANEL The motor control panel shall be equipped with all the necessary electrical components including a microprocessor control unit and a frequency drive. The control panel and the microprocessor shall cover the followings functions Flexibility and simplicity in allowing the necessary re-adjustment of the pumping system pre-set delivery pressure to operate the pumps within the specified maximum and minimum delivery ranges. Automatic change over of the pumps to be controlled by the micro processor which dictates the duty and standby pumps.When the system has not been operated for more than 24 hours, it shall automatically start the pumps for a few seconds/day to ensure the pumps readiness at all times. The standby pumps shall be activated upon failure of duty pump(s). In event of control failure, the pumps shall be able to be start/stopped manually at the local panel by means of pressure switches. The microprocessor control panel shall be able to cut-off the pumping system when excess pressure is registered in the discharge common manifold. The system shall have the capability of receiving input signal concerning reduced water level in suction tanks and shall have control mechanisms to prevent the pumps form running dry.Automatically starting the pumps when the water level is back to normal.In case of pump failure due to motor overload, the standby pump is switched onautomatically. Alarm signal is displayed on the LCD Display unit and alarm lights are activated.The system control panel shall incorporate LCD Display All circuit breakers, thermal overloads and contactors shall be of reputable make acceptable to the Consultant / Client. Electrical supply to the pump controller shall be protected using an isolating circuit breaker. The panel shall be built to start the pumps in suitable starting modes, i.e. D.O.L., Star/Delta, or using Soft Starters.PUMP PRESSURE VESSEL Diaphragm type pressure vessels shall be

Hydropneumatic System:Supply, installation, testing & commissioning of Hydro-pneumatic system with 3 nos. vertical in-line pumps complete in SS coupled with tEFC motor., suitable for operation on 415 volts, 50 Hz, 3 phase AC supply, with required Ltrs pneumatic pressure tank, mounting skid (if required for Control Panel), foot valves, G.I. suction & discharge pipes, fittings, cast iron / brass valves, C.I. Strainers at suction head, etc. The scope includes pressure switches, VFD based control panel with starters, protections, relays, cables, interlocking with level & pressure switches. Suction / Delivery Piping all connections, etc complete for domestic supply only. SCOPE:The item includes Pressure vessels, pressure switches, gauges, pressure transmitter on delivery manifold, pump suction & delivery piping, manifolds & valves, flexible bellows, Fixed speed/variable frequency drive, control panels, Microprocessor based operation)and all accessories including installation, testing & commissioning INSPECTION & TESTING:For electrical accessories, necessary tests shall be performed or factory test certificate shall be furnished.SYSTEM DESCRIPTION CONTROL PANEL The motor control panel shall be equipped with all the necessary electrical components including a microprocessor control unit and a frequency drive. The control panel and the microprocessor shall cover the followings functions Flexibility and simplicity in allowing the necessary re-adjustment of the pumping system pre-set delivery pressure to operate the pumps within the specified maximum and minimum delivery ranges. Automatic change over of the pumps to be controlled by the micro processor which dictates the duty and standby pumps.When the system has not been operated for more than 24 hours, it shall automatically start the pumps for a few seconds/day to ensure the pumps readiness at all times. The standby pumps shall be activated upon failure of duty pump(s). In event of control failure, the pumps shall be able to be start/stopped manually at the local panel by means of pressure switches. The microprocessor control panel shall be able to cut-off the pumping system when excess pressure is registered in the discharge common manifold. The system shall have the capability of receiving input signal concerning reduced water level in suction tanks and shall have control mechanisms to prevent the pumps form running dry.Automatically starting the pumps when the water level is back to normal.In case of pump failure due to motor overload, the standby pump is switched onautomatically. Alarm signal is displayed on the LCD Display unit and alarm lights are activated.The system control panel shall incorporate LCD Display All circuit breakers, thermal overloads and contactors shall be of reputable make acceptable to the Consultant / Client. Electrical supply to the pump controller shall be protected using an isolating circuit breaker. The panel shall be built to start the pumps in suitable starting modes, i.e. D.O.L., Star/Delta, or using Soft Starters.PUMP PRESSURE VESSEL Diaphragm type pressure vessels shall be

Supply, installation, testing, commissioning of 33KLD capacity water treatment plant including electrical Panel which includes considering 8 hrs of working , Regeneration frequncy once in a day, raw water pump (1w +1s) flow rate 4.13 cum/hr @head 35 m , including required filters,softener, valves, piping, gauges and including all required accessories automation details in which plant will strat on low level in treated water tank and will stop on high level in treated water tank. ( prarameter may change according to water test report) Design, Engineering, and preparation of civil WTP drawings and providing all equipment / Piping etc at site, erection testing and commisioning of equipments/ electricals/ piping for Water treatment plant inclusive of all types of taxes and duties. Cost shall be inclusive of all works chiseling, finishing, corecut and making making good the walls, floors, slab wherever required. Cost shall be inlusive of flanges, nutbolt, pressure gauges, pressure transmitter/pressure switch ball valve, butterfly valve, NRV, strainer, pump & control panel mounting skid etc including all accessories required Cost shall be inlusive of unloading, checking of material list as per challan while receiving material, storage with security , reconciliation of material is in contractors scope

Designing, Supplying, Installing, Testing & Commissioning Irrigation system (as per landscape drawing) including Spray Pou-up Sprinkler,drip irrigation, piping, valves, pumps for landscape area including all required necessary fittings,accessories, labours all taxes if any etc. (item shall include all required irrigation plumbing work material & labour cost)

Supply, installing, testing, commissioning and desigining of Walkin fountain of Size 3m x 1.5m (2nos) and 3m x3m (1no) as per architecural drawing and requirement including water supply return,recirculation pipelines and pump, inline filter including electrical panel all required accessories, fittings etc all for working of these fountains complete set

Supply, installing, testing, commissioning and desigining of 2 numbers of Water features with spout as per architecural drawing and requirement including water supply return,recirculation pipelines and pump, inline filter including electrical panel all required accessories, fittings etc all for working of these water features complete set

Supply, installing, testing, commissioning and desigining of 2 numbers of Water features with spout as per architecural drawing and requirement including water supply return,recirculation pipelines and pump, inline filter including electrical panel all required accessories, fittings etc all for working of these water features complete set

APPROACH ROAD WORKS

Pre-cast cement concrete solid block masonry of compressive strength 70 kg / cm2 in cement mortar 1:4 (1 cement : 4 corase sand ) in foundation and plinth size of blocks (30 x 20 x 15)

Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300-2 as per MORTH Specification 305

Construction of granular sub-base by providing coarse graded granitic or baslitic material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per MORTH Specification 401. For Grading II Material

Dry Lean Cement Concrete Sub- base (Construction of dry lean cement concrete Sub- base over a prepared sub- grade with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1, cement content not to be less than 150 kg/ cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant, transported to site, laid with a paver with electronic sensor, compacting with 8-10 tonnes vibratory roller, finishing and curing.)

Cement Concrete Pavement (Construction of un-reinforced, dowel jointed, plain cement concrete pavement over a prepared sub base with 43 grade cement @ 400 kg per cum, coarse and fine aggregate conforming to IS 383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or slip form paver, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, dowel bar, tie rod, admixtures as approved, curing compound, finishing to lines and grades as per drawing )

Supplying and fixing of Precast RCC slabs(factory made,the factory should be ISO certified and registered under Dirctorate of Industries, Govt. of India) at site in concrete Grade of M-25 with 20 mm nominal size Granitic or basaltic aggregate, consolidated by means of mechanical platform, vibration etc. with lifting hooks of M.s. 10mm bars and PVC cups including cost of reincforcement, Certificate from manufacturer shall be produced indicating grade of concret and minimum content of steel in the product along with 5 year free replacement warranty in case of breakage complete and as directed by Engineer -in -charge. Size 900 x 400 x 150 mm with steel reinforcement not less than 7 kg per unit -30 T capacity.

Dismantling kerb stone channel by manual means and disposal of dismantled material with all lifts and upto a lead of 1000 metre as per MORTH Specification 202

Dismantling the tile work in floors and roofs laid in cement including stacking of materials within 50 meters lead for thickness of tiles 10mm to 25mm.

ENTRANCE PLAZA WORKS

Providing & laying granite stone blocks for Arch at entrance plaza elevational part without cement, Using vertical & horizontal stone pin joints with Cutting,polishing, moulding ,shifting, transportation of raw matterial(Granite blocks),Machinary required cutting ,trimming, dressing ,anchoring and Skillked Manpower required for the job with all lead & lifts complete as per drawing with all respect & as directed by Engineer in Charge etc complete.

INTERIOR WORKS

CABIN TABLE WITH PEDESTAL & SIDE TABLE Table: Providing & fixing in position table in 19+12mm thick Marine BWP IS:710 (boiling water proof) plywood top & vertical supports in 19mm thick Marine BWP IS:710 plywood & modesty panel in 19mm Marine BWP IS:710 plywood & finished with 1mm laminate of approved color/texture externally and 1mm thk laminate internally. The table shall have keyboard tray in 19mm Marine BWP IS:710 ply finished with 1mm laminate on both the sides. Pedestal: Table shall be provided with drawer unit in 19mm thick Marine BWP IS:710 plywood front fascia, 12mm ply Marine BWP IS:710 for sides and back, with 6mm Marine BWP IS:710 plywood for base & finished with 1mm thick laminate IS:2046 externally and 1mm thick laminate IS:2046 internally and shall be supported on stainless steel telescopic side mounted channels. The drawer unit shall have three equal size drawers with central locking arrangement & solid handles in CP brass (100 mm) Side Table: The side table shall be in 19mm thick Marine BWP IS:710 (boiling water proof) plywood & finished with 1mm thick laminate IS:2046 externally and 1mm thick laminate IS:2046 internally & cabinets shutters fixed on brass hinges in SS brush finish & single shelf each in 19mm Marine BWP IS:710 ply with second class Indian teak wood lipping on all exposed sides & finished with 1mm thick laminate IS:2046 & fixed on SS finished shelf buttons. Note: All exposed edges shall be finished with second class teak wood lipping with 2 to 3 coats of melamine polish to match the shade of laminate with necessary labour, hardware, accessories etc. complete. All material shall be of approved make. All works complete as per the drawing / Image, technical specification and direction of the Engineer . Wire routing/ wire management shall be provided on main table or side table as specified rates shall include cut-outs to fix switch plates wherever specified.(Refer drawing number PU-IN-201) TABLE WITH PEDESTAL & SIDE TABLE (T1) (TABLE SIZE:1950mm(L)X 750mm(D) X 750mm(HT) , SIDE TABLE SIZE :1200mm(L) X500mm(D) X750mm(HT) (PEDESTAL SIZE:400mm(L)X 500mm(D) X 650mm(HT)

CORNER TABLE Providing & installing in position table made of S.S. 304 framework and 10 mm thick plain glass on top fixed in it . All works complete as per the drawing/ Image, technical specification and direction of the Engineer. (Refer drawing number PU-IN-201) CORNER TABLE (S.S. FRAME WITH GLASS TOP) (T2) SIZE: 600MM(L) X 600mm(D) X450 mm(HT)

LINEAR WORKSTATION Table: Providing & fixing in position table in 19mm thick Marine BWP IS:710 (boiling water proof) plywood top & vertical side supports in 19mm thick Marine BWP IS:710 plywood & finished with 1mm laminate of approved color/texture externally and 1mm thk laminate internally. The table shall have keyboard tray in 19mm Marine BWP IS:710 ply finished with 1mm laminate on both the sides. Pedestal: Table shall be provided with drawer unit in 19mm thick Marine BWP IS:710 plywood front fascia, 19mm ply Marine BWP IS:710 for sides and back, with 6mm Marine BWP IS:710 plywood for base & finished with 1mm thick laminate IS:2046 externally and 1mm thick laminate IS:2046 internally and shall be supported on stainless steel telescopic side mounted channels. The drawer unit shall have three equal size drawers with central locking arrangement & solid handles in CP Brass (100 mm) Note: All exposed edges shall be finished with second class teak wood lipping with 2 to 3 coats of melamine polish to match the shade of laminate with necessary labour, hardware, accessories etc. complete. All material shall be of approved make. All works complete as per the drawing / Image, technical specification and direction of the Engineer . Wire routing/ wire management shall be provided on main table or side table as specified rates shall include cut-outs to fix switch plates wherever specified. All works complete as per the drawing/ Image, technical specification and direction of the Engineer. (Refer drawing number PU-IN-201) ONE SEATER LINEAR WORKSTATION WITH DRAWER PEDESTALS (WS1) SIZE: 1350mm(L) X 600mm (D) X 750mm(H)

SLOTTED ANGLE METAL RACK Supplying and Installing in position slotted angle rack made up of 2.0 mm thick 30-38mm slotted angles and 1.0mm shelve panels. The angles shall be roll formed and manufactured from virgin coils having yeild strength of 250N/Sqmm. Panels shall have flange thickness of 40mm, 9.9mm slot holes for corner plates, cladding sheets and for fitting angles and UDL upto 120kg per level. Glavanized corner plates shall be of 1.5mm thickness and glavanized base plates of 1.8mm thickness.Fasteneners shall be elctro galvanized conforming to IS codes.All components shall be designed as per IS codes, IS 800 & IS 801, IS8081.The finish of steel components shall be superior quality powder coating have DFT (dry film thickness) of 50 microns. All material shall be of approved make. All works complete as per the drawing/ Image, technical specification and direction of the Engineer. (Refer drawing number PU-IN-201) SINGLE SIDED SLOTTED ANGLE METAL RACK (MR1) (SIZE:900mm(L)X 600mm(D) X 1850(HT) (Minimum height)

METAL STORAGE CABINET Supplying and installing in position Metal storage cabinet of welded framework of size 900 mm (W) x 450 mm (D) x 1800 mm ( minimum Height) made of Prime Quality CRCA Steel IS:513 grade sheet with panels from 0.6 mm thick CRCA Steel and front frame and shelf made from 0.8mm thick CRCA Steel. The cabinet shall be provided with Full height Steel Hinged Door with Plastic Recessed Handle cum Cam Lock which shall be having 3 way locking mechanism with shooting bolt arrangement. 4 numbers of welded frame work Full Shelves shall be provided having maximum 80 kg uniformly distributed load capacity. The top shall be in metal. The cabinet shall be finished with 50 Microns (+/-10) thick Epoxy Powder coating. All material shall be of approved make. All works complete as per the drawing/ Image, technical specification and direction of the Engineer. (Refer drawing number PU-IN-201) METAL STORAGE CABINET (MR2) (SIZE: 900mm(L)X 450mm(D) X 1850mm (minimum HT)

CHAIRS CABIN HEAD CHAIRS Supplying and placing in position armed revolving high back chairs of approved make and colour and BIFMA (The Business & Institutional furniture manufactures association) compliant. The seat chair shall have seat made up of hot pressed moulded reconstituted wood of 1.2 +/- 0.1cm thickness and back shall be in two part injection moulded plastic. The chair shall have High Resilience polyurethane foam moulded with density of 45 kg/m3 and Hardness load of 16-/+2 kg. as per IS:7888 for 25% compression. The chair shall be 360 degree revolve type. The armrests shall be height adjustable and the arm rest top shall be in moulded PU. The chair shall have Centre tilt mechanism with upright position locking,pneumatic height adjustment .The pedestal shall have nylon base and fitted with twin-wheel castors. The chair shall have fabric upholstery for seat & back as per design. (Min. rate of fabric 220 GSM Rs 700/rm).All material shall be of approved make. All works complete as per the drawing/ Image, technical specification and direction of the Engineer. (Refer drawing number PU-IN-201) CABIN HEAD CHAIRS (C1)

STAFF AND VISITORS CHAIRS Supplying and placing in position armed revolving mid back chairs of approved make and colour and BIFMA (The Business & Institutional furniture manufactures association) compliant. The seat chair shall have seat made up of hot pressed moulded reconstituted wood of 1.2 +/- 0.1cm thickness and back shall be in two part injection moulded plastic. The chair shall have High Resilience polyurethane foam moulded with density of 45 kg/m3 and Hardness load of 16-/+2 kg. as per IS:7888 for 25% compression. The chair shall be 360 degree revolve type. The armrests shall be fixed type and the arm rest top shall be in moulded PU. The chair shall have Centre tilt mechanism with upright position locking,pneumatic height adjustment .The pedestal shall have nylon base and fitted with twin-wheel castors. The chair shall have fabric upholstery for seat & back as per design. (Min. rate of fabric 220 GSM Rs 700/rm).All material shall be of approved make. All works complete as per the drawing/ Image, technical specification and direction of the Engineer. (Refer drawing number PU-IN-201) STAFF AND VISITORS CHAIRS (C2)

GREEN ROOM CHAIRS Supplying and Placing in position upholstered Chairs with arms of approved make, colour & size with cusioned seat & back made of natural and biodegradable material-Rubber wood of section size 25mm x 35mm. Providing water fall edge. Well cushioned back and seat made up of HR (high-resilience) foam (foam density 32 kg/m3). All material shall be of approved make. All works complete as per the drawing/ Image, technical specification and direction of the Engineer(Refer drawing number PU-IN-201) GREEN ROOM CHAIRS. (C3)

SOFA Supplying & placing in position sofa of approved design, colour and size having solid frame structure with inner frame made of kiln chemical treated approved high quality wood. The seat cushion shall be made of multi layered foam of density 32D with polyester polyfill outer layer of 180 gsm to keep the upholstery wrinkle free & soft. The backrest shall be made of foam of 23D with polyester polyfill outer layer of 180 gsm to keep the upholstery wrinkle free & soft. The seating cushions shall have 50 mm of elastic webbing of 250 gsm with diagonal weave. The outer finish shall be of superior quality leatherette (up to Rs. 400 per metre) stitched with nylon bonded thread. The legs shall be of Stainless steel 304 grade tubular section of dia 75mm and 2 mm thickness with rubber gasket. All material shall be of approved make. All works complete as per the drawing/ Image, technical specification and direction of the Engineer.(Seat Height - 410 mm) (Refer drawing number PU-IN-201) a) SINGLE SEATER SOFA (S1) (Minimum size) 750MM (L) x 750MM(W) x 750 MM (H)

SOFA Supplying & placing in position sofa of approved design, colour and size having solid frame structure with inner frame made of kiln chemical treated approved high quality wood. The seat cushion shall be made of multi layered foam of density 32D with polyester polyfill outer layer of 180 gsm to keep the upholstery wrinkle free & soft. The backrest shall be made of foam of 23D with polyester polyfill outer layer of 180 gsm to keep the upholstery wrinkle free & soft. The seating cushions shall have 50 mm of elastic webbing of 250 gsm with diagonal weave. The outer finish shall be of superior quality leatherette (up to Rs. 400 per metre) stitched with nylon bonded thread. The legs shall be of Stainless steel 304 grade tubular section of dia 75mm and 2 mm thickness with rubber gasket. All material shall be of approved make. All works complete as per the drawing/ Image, technical specification and direction of the Engineer.(Seat Height - 410 mm) (Refer drawing number PU-IN-201) b) DOUBLE SEATER SOFA (S2) (Minimum size) 1300MM (L) x 750MM(W) x 750 MM (H)

TABLE 4 SEATER (Outdoor) Supplying & installing in position outdoor tables with umbrella provision in middle. Top shall be of granite 18mm thick . The under structure of the table shall have a base made up of 8mm Hot Rolled stainless steel 304 grade plate . The base shall have required holes for fixing table top to it. The base shall be connected to a vertical pipe of 75mm diameter made of 2mm thick S.S. 304. with prong legs . The prongs shall be made of 2mm thick SS 304. The complete understructure shall be supported by levelers. All material shall be of approved make. All works complete as per the drawing/ Image, technical specification and direction of the Engineer. (Refer drawing number PU-IN-201) TABLE 4 SEATER WITH UMBRELLA ( Outdoor )

TABLE 4 SEATER (Outdoor) Supplying & installing in position outdoor tables without umbrella. Top shall be of granite 18mm thick . The under structure of the table shall have a base made up of 8mm Hot Rolled stainless steel 304 grade plate . The base shall have required holes for fixing table top to it. The base shall be connected to a vertical pipe of 75mm diameter made of 2mm thick S.S. 304. with prong legs . The prongs shall be made of 2mm thick SS 304. The complete understructure shall be supported by levelers. All material shall be of approved make. All works complete as per the drawing/ Image, technical specification and direction of the Engineer. (Refer drawing number PU-IN-201) TABLE 4 SEATER WITHOUT UMBRELLA ( Outdoor )

PVC CHAIRS OUTDOOR (C4) (Outdoor) Providing & fixing in position PVC/Plastic Molded chairs for market court of approved make and colour with arms rest made from 100% virgin Polymer having back support and chairs should be stackable, light weight for easy handling etc. complete. The frame of the chair shall have a base made up of 4mm Hot Rolled stainless steel 304 grade. All material shall be of approved make. All works complete as per the drawing/ Image, specification and direction of the Engineer. (Refer drawing number PU-IN-201) PVC CHAIRS (C4) (Outdoor)

PLASTIC CHAIRS OUTDOOR (C5) Providing & fixing in position Fiber/ PVC Molded chairs for movie court of approved make and colour with arms rest made from 100% virgin Polymer having back support with SS legs. Chairs should be stackable, light weight for easy handling etc. complete. The frame of the chair shall have a base made up of 4mm Hot Rolled stainless steel 304 grade.All material shall be of approved make. All works complete as per the drawing/ Image,specification and direction of the Engineer. (Refer drawing number PU-IN-201) PVC CHAIRS OUTDOOR (C5)

TICKET COUNTER Providing & fixing in position Ticket counters in 19mm thick Marine BWP IS:710 (boiling water proof) plywood with ledge & front fascia in 19mm the Marine BWP IS:710 ply & finished with 1mm laminate of approved color/texture externally and 1mm thk laminate internally. The table shall have keyboard tray in 19mm Marine BWP IS:710 ply finished with 1mm laminate on both the sides. Table shall be provided with drawer unit in 19mm thick Marine BWP IS:710 plywood front fascia, 12mm ply Marine BWP IS:710 for sides and back, with 6mm Marine BWP IS:710 plywood for base & finished with 1mm thick laminate IS:2046 externally and 1mm thick laminate IS:2046 internally and shall be supported on stainless steel telescopic side mounted channels. The drawer unit shall have central locking arrangement & solid handles in CP brass (100 mm). All exposed edges shall be finished with second class teak wood lipping with 2 to 3 coats of melamine polish to match the shade of laminate with necessary labour, hardware, accessories etc. complete. Provision shall be made for wire management to take care of basic wiring requirement for providing power data- voice switches on a modular switch plate. Table shall have independent wire manager, Stainless steel finished hardware. The rate shall include cleaning, placing in position, etc. complete. All material shall be of approved make. Measurements shall be calculated of table length x height. All works complete as per the drawing, specification and direction of the Engineer. (Refer Drawing number PU-IN-601) TICKET COUNTER (B1)

DRESSING UNIT IN GREEN ROOM Providing & fixing dressing table with 50 mm thk ledge in 19mm BWP (boiling water proof) ply with 25 x 75mm plywood frame and finished in 1 mm thick laminate and edges finished with 2nd class Indian teak wood lipping with 2 to 3 coats of melamine polish to match the colour/shade of the laminate. 50/65mmx150mm cable manager band in ply finished with 1mm laminate shall be provided & provision shall be made for wire management to take care of basic wiring requirements for providing switches on a modular switch plate. All material shall be of approved make. All works complete as per the drawing, specification and direction of the Engineer. (Refer Drawing number PU-IN-602) DRESSING UNIT IN GREEN ROOM (B2)

GREEN ROOM STORAGE CABINET Providing & fixing in position Cabinet Storage in19 mm thick Marine BWP (boiling water proof) plywood & finished with 1mm thick laminate externally and 1mm thick laminate inside. Back sheet in 8mm plywood & Shelves shall be in 19mm thick ply finished with laminate and fixed on SS shelf buttons. SS Hanger rod shall be provided. All exposed edges shall be finished with second class Indian teak wood lipping with 2 to 3 coats or more of melamine polish to match the shade of laminate & complete with necessary labour,hardware, cleaning, placing in position etc. complete. All material shall be of approved make. All works complete as per the drawing, specification and direction of the Engineer.(Refer Drawing number PU-IN-602) GREEN ROOM STORAGE CABINET (B3)

STORAGE UNIT Providing & fixing in position Back Storage unit in 19+12mm thick Marine BWP (boiling water proof) IS:710 plywood top & finished with 1mm thick laminate IS:2046 externally and 1mm thick laminate IS:2046 internally. Back ply in 8mm thick Marine BWP IS:710 plywood & cabinets with shutters fixed on SS. brush finished brass 'L' hinges and single shelf each in 19mm thick Marine BWP IS:710 plywood with teak wood lipping on all sides & finished with 1mm thick internal laminate IS:2046 on both sides & fixed on stainless steel finished shelf buttons. Shutters shall be fixed with heavy duty CP brass handles (100 mm). All exposed edges shall be finished with second class Indian teak wood lipping with 2 to 3 coats or more of melamine polish to match the shade of laminate & complete with necessary labour, hardware, cleaning, placing in position etc. complete. All material shall be of approved make. All works complete as per the drawing, specification and direction of the Engineer.(Refer Drawing number PU-IN-602) STORAGE UNIT (B4) (SIZE: 2700mm(L) X 450mm(D) X 750mm(H)

LOCKER STORAGE Providing & fixing in position locker unit in 19mm thick Marine BWP (boiling water proof) IS:710 plywood top & finished with 1mm thick laminate IS:2046 externally and 1mm thick laminate IS:2046 internally. Back ply in 8mm thick Marine BWP IS:710 plywood & cabinets with shutters fixed on SS. brush finished brass 'L' hinges and single shelf each in 19mm thick Marine BWP IS:710 plywood with teak wood lipping on all sides & finished with 1mm thick internal laminate IS:2046 on both sides & fixed on stainless steel finished shelf buttons. Shutters shall be fixed with heavy duty CP brass handles (100 mm). All exposed edges shall be finished with second class Indian teak wood lipping with 2 to 3 coats or more of melamine polish to match the shade of laminate & complete with necessary labour, hardware, cleaning, placing in position etc. complete. All material shall be of approved make. All works complete as per the drawing, specification and direction of the Engineer.(Refer Drawing number PU-IN-602) LOCKER STORAGE 450MM DEPTH (B5)

CALCIUM SILICATE FINISH PARTITION Providing & fixing in position solid partition made of aluminum framework of size 65mm x 38mm tubular frame ,18 gauge having grid spacing at 600mm x 600mm center to center both ways & covered with 8mm thick Marine BWP (boiling water proof) IS:710 plywood on both sides of framework & finished with 12mm thick calcium silicate board. 12mm thick plywood Skirting in 75mm height to be finished with 1 mm thk laminate of approved make/ color/ sample on both the sides. The framework shall be properly screwed to the walls, ceiling and floor and plywood shall be screwed to the framework. The space between the framework grid shall be filled with glass wool having density of 48 Kg/ Cum for sound insulation. Provision shall be made for necessary cutouts for services such as wire management etc. as per design including all necessary hardware & accessories, grooves, adhesives, cutting & making good the original surfaces on completion. All material will be of approved make. Measurements shall be calculated from finished floor level to false ceiling level, the framework above false ceiling will not be calculated but the rate shall include the cost of framework above false ceiling upto slab/beam bottom wherever applicable. All works complete as per the drawing, specification and direction of the Engineer.(Refer Drawing number PU-IN-602) CALCIUM SILICATE FINISH PARTITION (B6)

GLASS PARTITION Providing & fixing full height glass partition upto maximum 2400 mm height with 12 mm thick toughened glass having etching pattern as approved fixed on Twin pro Interlocking anodized solid aluminum Single glazing profile on top and bottom sides as per design including all necessary hardware & accessories, grooves, adhesives, cutting & making good the original surfaces on completion.The item also includes silicon filling in between glass joints. All material shall be of approved make.All works complete as per the drawing, specification and direction of the Engineer.)(Refer Drawing number PU-IN-602) GLASS PARTITION (B7)

SINGLE SHUTTER GLASS DOOR Providing & fixing in position single shutter glass door using 12mm thick toughened glass having etching pattern/3M film as approved & fixed using heavy duty double action floor spring, SS brush finish solid top patch with pivot and provided with SS 304 grade matt finish handle, SS brush finish solid bottom patch lock & PVC door buffer. All material shall be of approved make. All works complete as per the drawing, specification and direction of the Engineer.(Refer Drawing number PU-IN-602) SINGLE SHUTTER GLASS DOOR (SIZE- 900MM(L) X 2400MM(H) (B8)

MIRROR PANELLING Providing & fixing in position mirror paneling in 12mm thick plywood on wall in 6mm thick mirror, having plain edge polish on all sides and fixed using silicon sealant with all necessary hardware , fittings , etc. All material shall be of approved make. All works complete as per the drawing, specification and direction of the Engineer. (Refer Drawing number PU-IN-602) MIRROR PANELLING (B9)

PODIUM FOR SPEAKER Providing, fabricating and placing in specified position Lectern/podium using 19mm approved make Boiling water proof marine ply(BWP, IS Code 710:2010), 1.0 mm thick laminate on all sides of matching / approved colour with 6 mm teakwood lipping of matching / approved colour of top length :- 600mm, depth :-500mm and Height:- 1085mm with one shelf of 200 mm including making provision for direct connectivity to detachable gooseneck condenser microphone and reading light, for the podium top, and provision for two nos. of VHF wireless handheld transmitters of different frequency. 3 nos. of 6.5” (165mm) coated dual cone speakers as per the picture & as directed by Engineer etc. complete. (Please refer annexure for approved make / manufacturer) (Refer Drawing number PU-IN-602) PODIUM FOR SPEAKER (B10) (SIZE:600mm(L) X 500mm(W) x 1085mm(HT)

LAMINATE PANELING Providing & fixing in position wall panelling in 12 mm thick Marine BWP IS:710 (boiling water proof) plywood finished with 1mm thick laminate IS:2046 with 1mm groove in laminate of approved shade & finish/texture. The panelling shall have horizontal & vertical framework at 600mm c/c in 19mm thick double ply upto required depth (maximum 150mm) as per design screwed on wall or fixed on wall by means of 25mm x 25mm GI "L" corners as per detail and with 12mm thick Marine BWP IS:710 plywood fixed on it. Provision shall be made for wire management to take care of basic wiring requirement if required. All exposed edges of plywood shall be finished with teak wood lipping with 3 coats or more of melamine polish of approved shade with necessary labour, hardware, cleaning, placing in position etc. complete. All material shall be of approved make. All works complete as per the drawing, specification and direction of the Engineer.(Refer Drawing number H-IN-201, H-IN-202, H-IN-203, H-IN-606) LAMINATE PANELING (B11)

TEXTURED MDF PANELING Providing & fixing in position wall panelling in 12mm thick Marine BWP IS:710 (boiling water proof) plywood finished with 12mm thick textured MDF of approved design & texture. The panelling shall have horizontal & vertical framework at 600mm c/c in 19mm thick double Marine BWP IS:710 plywood upto required depth (maximum 100mm) as per design fixed on wall with screws or fixed on wall by means of 25mm x 25mm GI "L" corners as per detail and with 12mm thick Marine BWP IS:710 plywood fixed on it with 12mm thick textured MDF. Texture shall be matched at joints. Panelling shall be finished with Duco paint of approved shade and coats to achieve desired effect. Provision shall be made for wire management to take care of basic wiring requirement if required. All exposed edges of plywood shall be finished with teak wood lipping with 3 coats or more of melamine polish of approved shade with necessary labour, hardware, cleaning, placing in position etc. complete. All material shall be of approved make. All works complete as per the drawing, specification and direction of the Engineer.(Refer Drawing number H-IN-201, H-IN-202, H-IN-203, H-IN-607) TEXTURED MDF PANELING (B12)

GRIPPER/FABRIC ACOUSTICAL WALL PANELLING Gripper/fabric Panels on Side Walls-Providing & Fixing in position, Acoustical Paneling made from 50mm acoustical fabric panels on G. I. Frame of ceiling channels as per manufacturer’s specifications, pervaded with 48 Kg /CuM glass wool 50 mm thick with first layer of non woven acoustically transparent fabric and second layer of acoustically transparent fabric of approved colour including cost of required Cut-Outs, & Scaffolding, as per Architectural & Acoustical Design & Instructions & Complete in all aspects. (Auditorium Side wall and back wall , stage side wall , and back wall ). (Refer drawing number -TM-IN-605). GRIPPER/FABRIC ACOUSTIC PANELS AUDIO VISUAL ROOM WALL PANELLING (B13)

HDF ACOUSTIC PANELS AUDITORIUM WALL PANELLING Dado-Side Walls-Providing and fixing in position Acoustical paneling made from prelaminated HDF partt panels mounted on GI carrier and mounted on G. I. frame as per specification 600mm c to c and chicken mesh on wall side, in front of 48Cum/50mm thick glass wool Including cost of required cut-outs and scaffolding as per architectural and acoustical design complete in all respects.(Auditorium side wall, back wall, stage side wall, stage back wall) .(Refer drawing number -TM-IN-605) HDF ACOUSTIC PANELS AUDITORIUM WALL PANELLING (B14)

STAINLESS STEEL DUST BIN (7 litres ) Providing and placing in position 16 gauge stainless steel pedal dust bin of grade 304 cylindrical with cover of 7 litres capacity (minimum 200mm dia x 275mm ht). All material shall be of approved make. All complete as per the drawing, specification and direction of the Engineer.(Refer Drawing number PU-IN-501)

PLASTIC DUST BIN ( 7 litres ) Providing and placing in position virgin polymer (HDPE) dustbin of thickness 2.5mm (+/-0.2mm) with a circular top of 7 litres capacity. All material shall be of approved make. All complete as per the drawing, specification and direction of the Engineer.(Refer Drawing number PU-IN-501)

PLASTIC DUST BIN WITH FOOT OPERATED LID (60-70 Litres ) Providing and placing in position virgin polymer (HDPE) dustbin of thickness 2.5mm (+/-0.2mm) with a circular top of 60-70 litres capacity. It shall be fitted with foot operated lid and handles for lifting (refer IS 3730:1988). Lid mechanism shall be of SS 4mm (min.) rods only. Bin shall be fitted with 2 nos. Of SS square (hollow) pipe of 20mm x 20mm at bottom for steady placement. All material shall be of approved make. All complete as per the drawing, specification and direction of the Engineer.(Refer Drawing number PU-IN-501)

NATURAL GREEN PLANTS WITH SS PLANTERS Providing and planting natural green alive plants (height 450mm minimum) for indoors including stainless steel 304 grade cylindrical planter of Size (around 450mm dia x 600mm height soil, manure, watering and handing over to client etc.complete. All the materials shall be of approved make. All works complete as per the drawing, specification, image and direction of the Engineer. Range of indoor plants - Aglaonema Red, Aglaonema Green, Philodendron Xanandu, Spathiphyllum Wallissi.(Refer Drawing number PU-IN-501)

FLOOR MATS Providing and placing in position PVC (Poly Vinyl Chloride) green mat with thickness of 15mm of approved make, approved colour made of special polymer tufts that scrape stubborn dirt with designer anti-curl edge guards, natural elastomer base,100% anti skid, hygienic & non-toxic etc. All the materials shall be of approved make. All works complete as per the drawing, specification and direction of the Engineer. (Refer Drawing number PU-IN-501) a) SIZE - 1800mm X 750mm

FLOOR MATS Providing and placing in position PVC (Poly Vinyl Chloride) green mat with thickness of 15mm of approved make, approved colour made of special polymer tufts that scrape stubborn dirt with designer anti-curl edge guards, natural elastomer base,100% anti skid, hygienic & non-toxic etc. All the materials shall be of approved make. All works complete as per the drawing, specification and direction of the Engineer. (Refer Drawing number PU-IN-501) b) SIZE - 900mm X 600mm

BLACKOUT ROLLER BLINDS Providing & fixing in position black out roller blinds (horizontal) of approved fabric with aluminium extruded rail powder coated in white. Control unit to be made of high strength reinforced plastic. Roller tube to be color anodised extruded tube of high strength alloy, including all necessary fittings and fixtures like idler, head rail, control unit, roller tube, bottom rail, operating chain, fixing brackets, clamps, etc. complete. Fabric shall be of approved make, color, length, texture. All the materials shall be of approved make. All works complete as per the drawing, technical specification and direction of the Engineer.

CURTAINS Providing and fixing in position Black out polyster fabric (300 gsm) curtains ( basic rate 450 ruppes per meter ) & inclusive of hardware fittings like 25mm thick SS. 304 grade curtain rod with centre and end sockets, etc. complete. All the materials shall be of approved make. All works complete as per the drawing, specification and direction of the Engineer.

ROLLER BLINDS Providing & fixing in position roller blinds (horizontal) of approved fabric with aluminium extruded rail powder coated in white. Control unit to be made of high strength reinforced plastic. Roller tube to be color anodised extruded tube of high strength alloy, including all necessary fittings and fixtures like idler, head rail, control unit, roller tube, bottom rail, operating chain, fixing brackets, clamps, etc. complete. Fabric shall be of approved make, color, length, texture. All the materials shall be of approved make. All works complete as per the drawing, technical specification and direction of the Engineer.

TOILET MIRROR Providing and fixing 6mm thick Mirror on 12mm thick boiling waterproof plywood with silicon sealent and plain polish on all edges.The details need to be as per the instructions of Engineer. All the materials shall be of approved make. All works complete as per the drawing, specification and direction of the Engineer. SIZE – 600mm(L) x 1200mm(HT)

SOFT BOARDS (900mm x 600mm) Supply and installing in position soft display board having aluminum frame including 12mm thick soft board with blazer cloth top fixed in frame with clip fitting with all stainless steel hardwares and easy fixing to the wall. All material shall be of approved make. All works complete as per the drawing / Image, specification and direction of the Engineer. (Refer Drawing number PU-IN-501)

PICTURE FRAME Supplying & fixing in position approved painting in digital printing on digital printing paper with synthetic frame & lamination. The details need to be as per the instructions of Engineer. All the materials shall be of approved make. All works complete as per the drawing, specification and direction of the Engineer. (Refer Drawing number PU-IN-501) a) PICTURE FRAME (SIZE : 900 X 600 MM)

PICTURE FRAME Supplying & fixing in position approved painting in digital printing on digital printing paper with synthetic frame & lamination. The details need to be as per the instructions of Engineer. All the materials shall be of approved make. All works complete as per the drawing, specification and direction of the Engineer. (Refer Drawing number PU-IN-501) b) PICTURE FRAME (SIZE : 900 X 900 MM)

PICTURE FRAME Supplying & fixing in position approved painting in digital printing on digital printing paper with synthetic frame & lamination. The details need to be as per the instructions of Engineer. All the materials shall be of approved make. All works complete as per the drawing, specification and direction of the Engineer. (Refer Drawing number PU-IN-501) c) PICTURE FRAME (SIZE : 1200 X 600 MM)

MAGNETIC WHITE MARKER BOARD (SIZE : 1500mm(L) x 900mm(HT) Providing and fixing in position approved Magnetic white matt finish marker board of (SIZE - 1500 X 900 ) having Moulded Anodized Aluminium frame & stain resistant porcelain coated 28 gauge steel backing with Virgin ABS (Acryloniprile Butadiene Styrene) Molded 300x100mmm Chalk tray and Eraser complete, including all accessories. All material shall be of approved make. All works complete as per the drawing./ Image, specification and direction of the Engineer. (Refer Drawing number PU-IN-501)

NOTICE BOARD WITH ACRYLIC DOOR & LOCK (SIZE : 900 X 600 MM) Providing and fixing in position Notice board of size 1200mm(L) X 900(HT) mm made of Aluminium frame with Acrylic shutter including 12mm thick soft board with blazer cloth top fixed in frame with clip fitting with all stainless steel hardwares such as screws, locking arrangement etc. and making arrangement for fixing on wall all complete as per design.All material shall be of approved make. All works complete as per the drawing./ Image, specification and direction of the Engineer. (Refer drawing number – PU-IN-501)

CARPET ROLL Providing and fixing of tufted loop pile carpet having gauge of 1/10, pile weight 350 gsm,thickness 4 mm fixed to the flooring with SR (Synthetic rubber) solution with 8mm U-foam underlay, including minor leveling with plaster of Paris. All the materials shall be of approved make. All works complete as per the drawing, specification and direction of the Engineer. (Refer Drawing number PU-IN-501)

INTERNAL SIGNAGES (SS FINISH) Providing and fixing signage made of 1.5mm thick Stainless Steel plate of grade 304 with CNC Laser cut letters. This shall be fixed on 8mm thick transparent/ colored Acrylic board. The SS plate shall be fixed on the Acrylic board with 12mm dia SS studs of grade 304 with brass buttons and screws. The panel will be fixed on the door/wall with 12mm SS. stud /SS mirror screw arrangement /3m Tape or suspended from the ceiling by means of SS chain of 8mm dia with anchor fasteners complete as required. As per drawing and as directed by engineer. (Refer Drawing number PU-IN-501) a) INTERNAL SIGNAGES (SS FINISH) SIZE - 450mm (L) X 200mm (HT)

INTERNAL SIGNAGES (SS FINISH) Providing and fixing signage made of 1.5mm thick Stainless Steel plate of grade 304 with CNC Laser cut letters. This shall be fixed on 8mm thick transparent/ colored Acrylic board. The SS plate shall be fixed on the Acrylic board with 12mm dia SS studs of grade 304 with brass buttons and screws. The panel will be fixed on the door/wall with 12mm SS. stud /SS mirror screw arrangement /3m Tape or suspended from the ceiling by means of SS chain of 8mm dia with anchor fasteners complete as required. As per drawing and as directed by engineer. (Refer Drawing number PU-IN-501) b) INTERNAL SIGNAGES (SS FINISH) SIZE - 300mm (L) X 150mm (HT)

INTERNAL SIGNAGES -ACP Providing and fixing in position signages made from 4 mm thick aluminium composite panel with computer cut lettering of specified height and width, self adhesive vinyl pasted on it to protect from peeling. The panel will be fixed on the door/wall with 12mm SS. stud /SS mirror screw arrangement /3m Tape or suspended from the ceiling by means of SS chain of 8mm dia with anchor fasteners complete as required. All material shall be of approved make. All works complete as per the drawing, specification and direction of the Engineer. (Refer Drawing number PU-IN-501) a) SIZE - 300mm (L) X 150mm (HT)

INTERNAL SIGNAGES -ACP Providing and fixing in position signages made from 4 mm thick aluminium composite panel with computer cut lettering of specified height and width, self adhesive vinyl pasted on it to protect from peeling. The panel will be fixed on the door/wall with 12mm SS. stud /SS mirror screw arrangement /3m Tape or suspended from the ceiling by means of SS chain of 8mm dia with anchor fasteners complete as required. All material shall be of approved make. All works complete as per the drawing, specification and direction of the Engineer. (Refer Drawing number PU-IN-501) b) SIZE - 300mm (L) X 300mm (HT)

INTERNAL SIGNAGES -ACP Providing and fixing in position signages made from 4 mm thick aluminium composite panel with computer cut lettering of specified height and width, self adhesive vinyl pasted on it to protect from peeling. The panel will be fixed on the door/wall with 12mm SS. stud /SS mirror screw arrangement /3m Tape or suspended from the ceiling by means of SS chain of 8mm dia with anchor fasteners complete as required. All material shall be of approved make. All works complete as per the drawing, specification and direction of the Engineer. (Refer Drawing number PU-IN-501) c) SIZE - 900mm (L) X 1200mm (HT)

LETTERS OF BUILDING NAME (INTERNAL) SIZE OF THE THREE DIMENSIONAL LETTER : 25MM (W) X 150MM (HT) PORVORIM TOWN SQUARE Providing and fixing in position three dimensional building name using 18 gauge brush finish 316 grade stainless steel sheet lettering of width 25 mm x height 150 mm, projecting 25mm from the wall/partition/panelling and fixed at specified height in line and level by means of fully threaded stainless steel holdfast /studs which will be vertically welded to the back side of each letter. The stainless steel holdfast / studs will be inserted to the wall/partition/panelling by means of drilled holes and fixed with silicon for permanent fixing purpose and any other accessories etc. complete.All material shall be of approved make. All works complete as per the drawing/ Image, technical specification and direction of the Engineer.(Refer Drawing number PU-IN-501)

EXTERNAL SIGNAGES Providing & fixing in position signage's made from 4mm thick aluminium composite panel with computerized cut self adhesive vinyl graphic covered with clear vinyl to protect from peeling. The signage shall be fixed on wall with 12mm dia SS studs /mirror screws or hung from ceiling using stainless steel chains as per location. All the materials shall be of approved make. All works complete as per the drawing, specification and direction of the Engineer. (Refer drawing number ) (Refer Drawing number PU-IN-501) a) SIZE - 900MM (L) X 300MM (HT)

EXTERNAL SIGNAGES ON POLE Providing & fixing in position signage's made from 4 mm thick aluminium composite panel of specified sizes mounted on framework of M.S. tubular section of size 40mm x40mm x 2 mm The background of the panel should be pasted in retro reflective material, computerized cut, self adhesive film pasted on it. The board is to be fixed on wall with 12mm dia SS studs /mirror screws or mounted on 1 or 2 numbers of 2" dia GI pipe at specifeid height (1.80M to 2.40M ) having a coat of metal primer with 2 or 3 coats of black enamel paint to get the required finish. Script for naming should be in English/Kokani/ /Devnagri or as per instructions. All the materials shall be of approved make. All works complete as per the drawing, specification and direction of the Engineer. (Refer drawing number ) (Refer Drawing number PU-IN- 501) a) SIZE - 900MM (L) X 300MM (HT)

EXTERNAL SIGNAGES ON POLE Providing & fixing in position signage's made from 4 mm thick aluminium composite panel of specified sizes mounted on framework of M.S. tubular section of size 40mm x40mm x 2 mm The background of the panel should be pasted in retro reflective material, computerized cut, self adhesive film pasted on it. The board is to be fixed on wall with 12mm dia SS studs /mirror screws or mounted on 1 or 2 numbers of 2" dia GI pipe at specifeid height (1.80M to 2.40M ) having a coat of metal primer with 2 or 3 coats of black enamel paint to get the required finish. Script for naming should be in English/Kokani/ /Devnagri or as per instructions. All the materials shall be of approved make. All works complete as per the drawing, specification and direction of the Engineer. (Refer drawing number ) (Refer Drawing number PU-IN- 501) b) SIZE - 1200MM (L) X 600MM (HT)

Letters of building name (abbreviation) - PORVORIM TOWN SQUARE Providing and fixing in position signage made up of 316 grade SS brush finish box type three dimensional letters having plate thickness 1 mm and the depth of the letter shall be 50/60mm, lettering of width 50 mm x height 300 mm and it will be fixed on brick wall / RCC beam etc. at all heights in line and level by means of 6 mm dia fully threaded stainless steel holdfast screwed to RCC members which will be vertically welded/ threaded to the back side of the letter. The stainless steel holdfast will be inserted to the wall by means of drilled holes and fixed with silicon for permanent fixing purpose and any other accessories approved by the engineer, with required staging and scaffolding at maximum height of 7/8 meters from ground level. All the materials shall be of approved make. All works complete as per the drawing, specification and direction of the Engineer.(Refer drawing number PU - IN - 505)

PROVIDING & FIXING MDR/ LANE SIGNAGE DETAIL - 124 INCH 49 INCH - PAYLON SIGN - AS PER DESIGN - RETRO RELFECTIVE 3M VINYL WITH ACP BASE. BOTH SIDE. WITH SS OR GS PIPE FRAMMING FOR STRUCTURE. 8.0 FT X 4 FT

PROVIDING & FIXING SPECIFIC IDENTITY SIGN - AS PER DESIGN - ACP- 8.0 FT X 3 F

PROVIDING & FIXING NH SIGNAGE DETAIL - 10 FT X 4.0 FT - PAYLON SIGN - AS PER DESIGN - . WITH RETRO RELFECTIVE 3M VINYL WITH ACP BASE. BOTH SIDE. WITH SS OR GS PIPE FRAMMING FOR STRUCTURE

CALCUIM SILICATE BOARD PLAIN FALSE CEILING Providing and fixing 8mm thick calcuim silicate board suspended false ceiling false ceiling in horizontal / vertical surfaces, stepped, cove ( straight & curvature). The calcuim silicate board having density of 850 to 950kg/m3, shall be made from Siliceous & Calcareous material reinforced with fiber,made in Laminar process and then autoclaved to give stable crstalline structure. The framework shall consist of approved make Galvanised iron (GI) Perimeter Channel of 0.55 mm thickness, two unequal flanges of 20 mm and 30 mm and web of 27 mm fixed to surrounding walls / partition by using nylon sleeves and screws at 450 mm centres. Approved make Galvanised iron (GI) Intermediate Channel of 0.9 mm thickness having two equal flanges of 15 mm each and a web of 45 mm shall be suspended from the soffit at 1220 mm centre with G.I.Cleat and steel expansion fasteners. Galvanised iron (GI) Ceiling section of 0.55 mm thickness having web of 50.5 mm and flanges of 26 mm each with lips of 10.5 mm shall be fixed to the Intermediate channel with connecting clips across to the Intermediate channel at 457 mm centres.respectively. Calcuim silicate boards of 8 mm thickness having taper edge /Square edge shall be screw fixed across the ceiling sections with 25 mm long self drilling.The item shall include providing markings and cutouts for electrical fixtures,sprinklers,smoke detectors,diffusers,curtains etc. on the ceiling and also providing & fixing templates in the ceiling made of 12/19mm BWP (boiling water proof) plywood. All material shall be of approved make. Measurements shall be considered wall to wall without any deductions. All works shall be complete as per the drawing, specification and direction of the Engineer. (Refer drawing number –PU-IN-301,PU-IN-302 )

600X600MM CALCIUM SILICATE ACOUSTICAL TILE FALSE CEILING Providing and fixing 15mm thick densified tengular edged eco friendly light weight Calcium Silicate false ceiling tiles (like Aerolite Brand or Equivalent) of approved texture Spintone/ Cosmos/ Fine Fissured or equivalent of size 595mm x 595mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanizing @ 120 grams per square metre. including both side) consisting of main "T" runner suitably spaced at joints to get required length and of size 24x38mm made from 0.33mm thick (minium) sheet, spaced 1200mm center to center, and cross "T" of size 24x28mm made of 0.33mm thick (Minimum) sheet to be inter locked at middle of the 1200x600mm panel to from grid of size on a Perimeter wall angle precoated steel of size 600x600mm, resting on periphery walls/ partitions (24x24x300mm) made of 0.40mm thick (minimum) sheet with the help of rawl plugs at 450mm and laying 15mm thick densified edges calcium silicate ceiling tiles of approved texture light fittings, fixture, smoke detectors etc., wherever required. Main "T" runners to be suspended from ceiling using G.I. slotted cleats of size 25x35x1.6mm fixed to celing using with 12.5mm dia and 50mm long dash fastners, level clips of size 85x30x0.8mm, spaced at 1200mm center to center along main "T" bottom exposed with 24mm of T-section shall be pre-painted with polyester baked paint, for all heights, as per specifications, drawings etc. complete. Note: Only Calcium silicate false ceiling area will be measured from wall to wall. No deduction shall be made for exposed frames/ opening (cut outs) having are less than 0.30 sqm. The Calcium silicate ceiling tile shall have NRC value of 0.50 (Minimum), light reflection>85% non-combustible as per B.S.476 part IV, 100% humidity resistance and also having thermal conductivity 0.043 w/m 0 KC.(As Directed by Engineer in Charge)(Refer drawing number –PU-IN-301 )

600X600MM ALUMINIUM METAL TILE GRID FALSE CEILING Providing & Fixing of Aluminium Lay in Plain Tile Ceiling on 24 /14 mm 'T' Framework of module 600mm X 600mm. Tiles of size 575mm X 575mm / 584mm x584mm made out of 0.6mm thick Aluminium. The tile shall be manufactured on advanced equipment, which includes several leveling. The tile end shall be raised up ward & bend outward to lay the tile in framework. The tile shall be Polyester based, Powder coated in white color. Grid system for fixing ceiling tiles shall comprise of Tees. The 24 /14 mm main Tee runners shall be suspended at an interval of 1200mm centre to centre. The 24 /14 mm cross runner shall be suspended at 600 mm center to centre and further supported with 24 /14 mm cross Tee at 600 mm centre to centre with internal locking arrangements to form grid of 600mm X 600mm. The main Tee shall be supported by means of 4mm GI rod from slab / roof. The suspension shall be provided at 1200mm to 1500 mm centre to centre. Tee framework would be made of GI and Powder coated. The item shall include providing markings and cutouts for electrical fixtures,sprinklers,smoke detectors,diffusers etc. on the ceiling and also providing & fixing templates in the ceiling made of 6mm to 18 mm BWR (boiling water proof) Plywood as required BWP (boiling water proof) plywood. All material shall be of approved make. Measurements shall be considered wall to wall without any deductions. All works shall be complete as per the drawing, specification and direction of the Engineer.(Refer drawing number -PU-IN-301)

PERFORATED GYPSUM PLASTERBOARD ACOUSTICAL FALSE CEILING Providing and fixing Perforated gypsum plasterboard Acoustical suspended ceiling. The framework shall have surface ribbed perimeter channels (having one flange of 20mm and another flange of 30mm and a web of 27mm) along the perimeter of ceiling, screw fixed to brick wall/partition with the help of nylon sleeves and screws, at 610mm centers. surface ribbed intermediate channels of size 45mm (with two flanges of 15mm each) shall be suspended from the soffit at 1200mm centers with surface ribbed ceiling angle of width 25mmx10mm fixed to soffit with GI cleat and steel expansion fasteners. Then surface ribbed ceiling section having web of 51.5mm and two flanges of 26mm each with lips of 10.5mm shall be fixed to the intermediate channel with the help of connecting clip and in direction perpendicular to the intermediate channel at 600mm centers. Single layer of 12.5mm perforated board of size 1200x2400mm having all four tapered edges, 16% perforation area of board and hole size of 12mm square shape, backed with acoustic tissue shall be screw fixed to ceiling section with 25mm drywall screws at 230mm centers. Screw fixing shall be done mechanically either with screw driver or drilling machine with suitable attachment. Square and tapered edges of the boards shall be jointed and finished so as to have a flush look which includes filling and finishing with Jointing compound, Joint Paper tape and two coats of drywall top coat. All material shall be of approved make. The item shall include providing markings and cutouts for electrical fixtures,sprinklers,smoke detectors,diffusers,curtains etc. on the ceiling and also providing & fixing templates in the ceiling made of 12/19mm BWP (boiling water proof) plywood. Measurements shall be considered wall to wall without any deductions. All complete as per the drawing, specification and direction of the Engineer.(Refer drawing number –PU-IN-301 )

PVC FALSE CEILING Providing and fixing PVC suspended false ceiling in horizontal / vertical surfaces, straight. The pvc pannels made up by using thermoprint technology of sixe 2700mm x 340mm without perforations with accesories like J profile, Connector shall be used. The framework shall consist of approved make Galvanised iron (GI) Perimeter Channel of 0.55 mm thickness, two unequal flanges of 20 mm and 30 mm and web of 27 mm fixed to surrounding walls / partition by using nylon sleeves and screws at 450 mm centres. Approved make Galvanised iron (GI) Intermediate Channel of 0.9 mm thickness having two equal flanges of 15 mm each and a web of 45 mm shall be suspended from the soffit at 1220 mm centre with G.I.Cleat and steel expansion fasteners. Galvanised iron (GI) Ceiling section of 0.55 mm thickness having web of 50.5 mm and flanges of 26 mm each with lips of 10.5 mm shall be fixed to the Intermediate channel with connecting clips across to the Intermediate channel at 457 mm centres respectively. PVC pannels VOX make shall be interlocked as per company standards.The item shall include providing markings and cutouts for electrical fixtures,sprinklers,smoke detectors,diffusers,curtains etc. on the ceiling and also providing & fixing templates in the ceiling made of 12/19mm BWP (boiling water proof) plywood. All material shall be of approved make. Measurements shall be considered wall to wall without any deductions. All works shall be complete as per the drawing, specification and direction of the Engineer. (Refer drawing number –PU-IN-301 )

ELECTRICAL WORKS

Supply and fixing of cable route marker 15 cms diameter of GI plate 6mm thick with inscription theron bolted or welded to 25mm x 25mmx 5mm angle iron 60 cms long and fixing the same in ground with PCC etc complete as required.

Supply of following size of 3 core, HV, 11 KV grade, ISI mark, XLPE cable with stranded compact circular aluminium conductor, conductor screened with extruded semiconducting compound, XLPE insulated, insulation screned with extruded semiconducting compound in combination with copper tape(0.3 KA for 1Sec.) cores laid off,inner sheath of PVC tape,galvanised steel flat strip armoured and overall PVC sheathed cable conforming to IS:7098(Part II) with latest amendments. 3 Core 300 sq.mm

Supplying and making Indoor cable end termination with heat shrinkable kit for following sizes of PVC insulated PVC sheathed/XLPE aluminium conductor cable upto 11 KV grade, complete as required. (d) 11 KV, 3 Core x 240 - 300sq.mm

Supplying and making Outdoor cable end termination with heat shrinkable kit for following sizes of PVC insulated PVC sheathed/XLPE aluminium conductor cable upto 11 KV grade, complete as required. (d) 11 KV, 3 Core x 240 - 300sq.mm

Laying of one number PVC insulated and PVC sheathed/XLPE power cable of grade exceeding 1.1 KV but not exceeding 11 KV grade of size exceeding 120 sq.mm but not exceeding 400 sq.mm direct in ground including excavation in the form of a trench as per Cable Trench Drawing provided by the Engineer-Incharge,sand cushioning with screened sand bed of 20mm thick , protective covering with bricks placed lenghtwise on top of cable all over the run and backfilling the excavated earth without stones or hard material and making the surface proper with 15 cm crown on the top complete as required. (a) Soily strata

Laying of one number PVC insulated and PVC sheathed/XLPE power cable of grade exceeding 1.1 KV but not exceeding 11 KV grade of size not exceeding 400 sq.mm direct in the existing RCC/HUME/STONEWARE Metal pipe, etc. complete as required.

Enamelled Danger board 440 Volts/11000 Volts / 33000 Volts : The Plate sholud be made from mild steel at least 1.6mm thick and vitreous enamelled white with Ketters, figures and convectional skull and bomes in signal res color on the front side.The rear side of the plate shall be enamelled.All letterin should be centrally spaced.The corners of the plates should be re=ounded offsize "250 x 200 mm".(as per drawing no. EE-II-3/2001, CEE/E490). Enamelled Danger board 440 Volts/11000 Volts / 33000 Volts

Construction of manhole rectangular in shape including cement concrete 1:3:6 (1 cement:3 coarse sand:6 graded stone aggregate 20mm nominal size) foundation thickness of concrete 20cms and offset 10cms on both sides and first class brick work with bricks class designation 100kg/sq.cm (wire cut bricks) cement mortar 1:3 (1 cement : 3 coarse sand) 23cms thick including providing & fixing CI footrests confirming to IS 5445/69 or revised and whose weight shall not be less than 5.30kgs including fixing in man-hole at 30cm c / c in 20x 20x10cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) and 12mm thick plaster inside and outside with cement mortar 1:3 (1 cement : 3 coarse sand) including adding waterproofing compound of approved brand in cement mortar with a floating coat of neat cement and making channel in cement concrete 1:2:4 (1 cement :2 coarse sand : 4 graded stone aggregate 20m nominal size) neatly finished complete as per standard design. Inside size 0.60x0.60m and 0.60m deep (with medium duty DI manhole cover & frame of size 0.60x 0.60m weighing 90kgs ) including fixing with cement concrete 1:2:4 ( 1 cement :2 coarse sand : 4 graded stone aggregate 20mm nominal size and applying the frame & cover with coal tar. Inside size 0.60x0.60m and 0.60m deep (with medium duty DI manhole cover & frame of size 0.60x 0.60m weighing 90kgs ) including fixing with cement concrete 1:2:4 ( 1 cement :2 coarse sand : 4 graded stone aggregate 20mm nominal size and applying the frame & cover with coal tar.

Construction of manhole rectangular in shape including cement concrete 1:3:6 (1 cement:3 coarse sand:6 graded stone aggregate 20mm nominal size) foundation thickness of concrete 20cms and offset 10cms on both sides and first class brick work with bricks class designation 100kg/sq.cm (wire cut bricks) cement mortar 1:3 (1 cement : 3 coarse sand) 23cms thick including providing & fixing CI footrests confirming to IS 5445/69 or revised and whose weight shall not be less than 5.30kgs including fixing in man-hole at 30cm c / c in 20x 20x10cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) and 12mm thick plaster inside and outside with cement mortar 1:3 (1 cement : 3 coarse sand) including adding waterproofing compound of approved brand in cement mortar with a floating coat of neat cement and making channel in cement concrete 1:2:4 (1 cement :2 coarse sand : 4 graded stone aggregate 20m nominal size) neatly finished complete as per standard design. Inside size 0.60x0.60m and 0.60m deep (with medium duty DI manhole cover & frame of size 0.60x 0.60m weighing 90kgs ) including fixing with cement concrete 1:2:4 ( 1 cement :2 coarse sand : 4 graded stone aggregate 20mm nominal size and applying the frame & cover with coal tar. Inside size 0.90 x 0.60m and 1.00m deep ( with medium duty DI manhole cover & frame of size 0.90x 0.60m weighing 105 kgs including fixing with cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size and applying the frame & cover with coal tar.)

Providing at store or site work non-pressure RCC pipes of with collar joints conforming to IS:458-2003 revised as per amendment No.11 , including freight, carting, loading, unloading, stacking etc. complete. 150 mm Dia.NP2 Class

Providing at store or site work non-pressure RCC pipes of with collar joints conforming to IS:458-2003 revised as per amendment No.11 , including freight, carting, loading, unloading, stacking etc. complete. 300 mm Dia.NP2 Class

Conveying carefully from stack at site, 250m from both sides rolling and lowering into trenches, laying and jointing true to line and level, RCC spun pressure and non-pressure pipes of various classes, specials including collar and perfect linking of joint with jack to correct position including cost of jointing material in cement mortar 1:2, necessary hydraulic testing, curing of cement mortar etc. complete. 150

Conveying carefully from stack at site, 250m from both sides rolling and lowering into trenches, laying and jointing true to line and level, RCC spun pressure and non-pressure pipes of various classes, specials including collar and perfect linking of joint with jack to correct position including cost of jointing material in cement mortar 1:2, necessary hydraulic testing, curing of cement mortar etc. complete. 300

Supplying, erecting, testing and commissioning 11 KV HT metering cubicle approved by licensee fabricated with 2 mm (14 SWG) M.S. sheets with supporting angle, painted with powder coating / epoxy paint of required shade, copper bus bar size 25 x 6 mm, heavy duty mechanical lock, with counter meter for measuring no of times the opening of meter door, top side cover (CT, PT cover) interlock with meter door, epoxy casted 3 nos CT having required ratio between 10- 50/5A, VA10 or 15, Class 0.5S, epoxy casted 3 nos PT having ratio 11000/V3/110/V3 VA 50, Class 0.5 suitable for provided trivector meter, and provision for incoming and outgoing cables complete duly tested by licensee with necessary test certificates and erected on provided plinth/ cc foundation .And Trivector meter , Class0.5s, three phase, 3/ 4 wire, 110/240V, in polycarbonate or sheet steel body ( base mounting type) with counter display/LCD display, tested by MRT along with Test Certificates, complete as required of following capacity of make L & T (ER300P) only: 1A/5Amps. One metering cubicle will be for the GED metering and the other metering cubicle will be client side check metering cubicle.The necessary SCADA compatible accessories are also to be provided.The Cubicle should have 7 sealing arrangements as per MRT guidelines.Metering cubicle should be compliant to GED specification.

3 WAY RMU, 11 KV, 630A, 21 kA 3Sec, SF6 Outdoor RMU - 3LBS a. Extensible/Non Extensible Three (3) Motor operated load break switches (LBSs) with Manual operated earthing switches in SF6 SCADA Compatible and base channel. Battery charger along with batteries required for Electrical operations of RMU is in the scope of the Bidder. Each module shall consist of VPIS, FPI in LBS Module (N- l) but not less than l no's per RMU. Suitable arrangement for mounting FRTU, modem or Ethernet Switch/LIU along with battery, battery charger shall be provided in RMU. Auxiliary PT as per specification shall be provided in RMU.

Supplying and Erecting approved make Outdoor compact substation with 630 kVA, 3 phase, 50 Hz. ONAN type , 11kV,630 A 21 kA for 3 sec. SF6 insulated non-extensible compact switchgear consisting of one no direct cable module and one no fixed manual vacuum circuit breaker in SF6 insulated stainless steel enclosure, with series trip, self powered microprocessor based numerical over current relay (IDMTL + Inst.) protection. interconnection between HT switchgear and transformer shall be using 1Cx3x300 sq.mm aluminium XLPE Unarm. cable. Copper wound transformer 630 kVA 11 kV/ 433V DYn11 oil filled, indoor type transformer bushings, hermetically sealed transformer with corrugated wall, using type A winding insulation (kraft paper), without gas cushioning ,without conservator type of design & top normal porcelain bushings for HT & LT with On load tap switch of rating +5% to -15% @1.5%. temp rise - oil/winding 40/45°C losses (subject to IS 1180) (energy efficiency level 1-Amendment 4) - max @ 50% loading : as per IS 1180 and max @ 100% loading : as per IS 1180 and impedance as per IS 1180 with LV panel-1000 amps aluminium busbar ( 100% for phase and 50% for neutral, current density - 1amp/sqmm) with outgoings 1 no. 1000 A 433V 4P 50Hz 50 kA, fixed manual type air circuit breaker (ACB) Microprocesssor based LSIG and 2 nos. 800 A MCCB LSIG, 2 nos. 630 A MCCB LSIG , 1 nos. 400 A MCCB LSIG, 1 nos. 200 A MCCB LSIG with microprocessor based release for overload , short circuit & earth fault protection. multifunctional meter with class 1.0Accuracy with RS 485 Port, RYB, ON/OFF trip indications, LT Check meter DLMS type Class 1 with CAMR MODEM ,LT CT ratio 1000/5A , Class 1 MRT Tested ,4 nos of lamp suitable to 18/20 watt LED batten type 2 ft. with wiring shall be provided inside CSS and controlled by 6 A switchgear any reputed make, Space Heater with Thermostat , Door limit Switch, Fan etc. Accessories: PRV with contacts, DGPT2 Relay, WTI with alarm & Trip contacts, Marshaling Box, OLTC & RTCC with AVR, BUCCOZ RELAY and includes other accessories required as per IS 1180 & 2026 latest. Outdoor enclosure having IP54 degree of protection for HT & LT switchgear compartment & IP23 degree of protection for transformer compartment, powder /colour coated enclosure, with interconnection between HT switchgear & transformer using 1Cx3x300 Sq.mm XLPE aluminium single core cable. interconnection between transformer & LT switchgear using aluminium busbars. internal earthing connections by using 50x6 mm GI strips including transformer neutral, complete with necessary permissions of Electrical Inspector ,With all Accessories.

Supplying and erecting fencing of section having size at least 2450 mm in height from ground level and 1200 mm width with angle iron frame work erected in CC foundation and painted complete with provided earthing.

Supplying and erecting double leaf hinged door each 1500 mm in width x 2450 mm in height using B class GI pipe, hinges and angle iron supports, chain link wire mesh (jali) complete supported on channel iron, erected in foundation and painted complete

Providing & Fixing of printed instruction chart for (with minimum 700 x 1000 mm in size) treating persons suffering from electric shock, printed in English & Marathi and duly laminated complete

Providing pair of duly tested rubber hand gloves as per IS :47705 suitable for working upto 33 kV supply complete.

Supplying and fixing standard first aid box with necessary antiseptic cream, medicine for use on wounds due burn, crepe bandage, gauge bandage, medicated ready to use bandage (Band-Aid) adhesive tape for medicinal use, scissors, antiseptic solution, etc. (All above contents shall be of standard makes)

Supplying and fixing PVC synthetic elastomer electrically insulating mat with class A insulation conforming to IS: 15652 – 2006 having 2 mm thickness upto 3.3 kV

Supplying shockproof leather safety shoes of electrical grade of standard size as IS :11226, 14544 duly tested, with necessary test certificate from manufacturer.

Supplying and fixing of following sizes of rigid PVC conduit alongwith accessories in surface(medium)/recess(heavy) including cutting the wall and making good the same in case of recessed conduit as required. 25 mm

Supplying and fixing of following sizes of rigid PVC conduit alongwith accessories in surface(medium)/recess(heavy) including cutting the wall and making good the same in case of recessed conduit as required. 32 mm

Supplying and fixing of following sizes of rigid PVC conduit alongwith accessories in surface(medium)/recess(heavy) including cutting the wall and making good the same in case of recessed conduit as required. 40 mm

Supplying, erecting, testing and commissioning of diesel generating set with alternator of 320 kVA output continuous rating, 3 phase, 415 V, 50 Hz, 0.8 p.f., A.C. supply, a totally enclosed air cooled / liquid cooled multi-cylinder diesel engine developing suitable BHP at 1500 rpm with 10% overload for 1 hour in 12 hours, along with standard accessories, self-excited, self-regulated, screen protected alternator with static excitation system running at 1500 RPM as per IS 4722 2001 with voltage regulation +/- 5 %, with performance class G2/G3 and maximum fuel consumption 54.89 ltr/hr @75% loading. Both the engine and alternator direct coupled on a common fabricated steel base frame and mounted on anti-vibrating pads, with standard control panel comprising meters, switchgears, indicators connected with suitable wires/cables, the complete set enclosed in composite acoustic enclosure as fully assembled integral unit made of 16 SWG CRCA sheet, sound absorbing material to restrict sound level up to 75 dB at 1.0 m, provided with first filling of oil, diesel not less than 480 ltr etc., on provided M20 grade CC foundation and obtaining necessary approval from Electrical Inspector.For CPCB4+ norms.

A. SITC a. Exhaust piping with insulation. b. 8 meter tall Chimeny Structural complete attached to Dg set with ladder,Check points ,platform Meter, lightening arrestor with earth pits,all accessories required as per GSPCB/CPCB .

Supply ,Installation,Testing & Commisioning of Electric Barrel Pump with below specifications *Pump Body in M. S. Chrome and impeller in P. P. For Lub Model *Suitable for 2' Bung-Hole container *Pump tube Length: 700 mm, 1000 mm, and 1250 mm. *Viscosity of Liquid Max.: 500 cp. *Pumping type: submerged, self-priming *Temperature of Liquid Max.: 60°C *Discharge: 80 lit./min. *Discharge Flow 60-70 lpm , *Discharge Pressure 10 m water column *Delivery Head: up to 9 metres (25 ft.) *Electric Motor: Single Phase, 400 W (LUB) , Universal Motor, operating on 230 V, 50 Hz, AC supply. *Also available in Air(Pneumatic) motor drive *Shock Proof and chemical resistant body. *Suitable for intermittent operation.

Earthing with GI earth pipe 2 mts long 40 mm dia medium class with ISI mark, of approved brands including accessories and providing masonry enclosure with CI/RCC cover having locking /Lifting arrangement and watering pipe etc. (but without charcoal or coke and salt) as required as per the Earthing Drawing provided by the Engineer-Incharge.The scope of work includes the following: a) Excavation of pit of size not less than 1.0x1.0x 2.0 mtrs(min) and disposal of excavated soil. b) Class B GI pipe, 40mm diameter as per specifications. c) Charcoal/salt as per specs ( paid seperately). d) Refilling the pit of size not less than 1.0x1.0x 2.0 mtrs(min) with soft black soil of minimum resistivity i/c transportation. e)Masonary chamber with proper foundation, cover plate and locking arrangement. f) Testing of earth value with earth megger and certifications of its value. Aluminium tag with embossed earthing value to be attached to the pipe. g)watering arrangement(plumbing will be paid seperately). In soily strata

Supply and providing Chemical earthing system (Pipe in pipe type) with Outer pipe of the electrode having minimum 80mm diameter as per the enclosed specifiations and drawing.The outer and the inner hot dip galvanised MS pipes shall conform to the specifications and the space inbetween shall be filled with highly crystalline conductive and anti- corrosive mixture conforming to IS-3043. The earth electrode shall be CPRI tested.The scope of work includes boring( 300mm dia mimnimum)/exvavation of soil/hard rock, refilling with required quantity of back fill compound/Ground resistance enhancement powder of requisite quantity, compaction, constuction of masonary chamber etc complete as required to obtain the desired value.Aluminium tag with embossed earthing value shall be permanently attached to the pipe electrode. (a) 3 metres length electrode

Earthing with copper earth plate 600 mm x 600 mm x 3 mm thick including accessories and providing masonry enclosure with CI/RCC cover having locking/lifting arrangement and watering pipe etc. (but without charcoal or coke and salt) as required as per the Earthing Drawing provided by the Engineer-Incharge.The scope of work includes the following: a) Excavation of pit of size 1.0x1.0x 3.0 mtrs(min) and disposal of excavated soil. c)Watering GI pipe, 20 mm Class B, with funnel as per specs. d) Charcoal/salt as per specs ( paid seperately). e) Refilling the pit of size 1.0x1.0x 3.0 mtrs(min) with soft black agriculture soil of minimum resistivity i/c transportation. e)Masonary chamber with proper foundation, cover plate and locking arrangement. f) Testing of earth value with earth megger and certifications of its value. g)watering arrangement(plumbing will be paid seperately). In soily strata

Extra for using salt and charcoal for pipe earth electrode as required ( 65 Kgs of Charcoal and 5 Kgs of Salt).

Extra for using salt and charcoal for GI or copper plate earth electrode as required( 96 Kgs of Charcoal and 5 Kgs of Salt)

Providing and fixing 6 SWG dia GI wire on surface or in recess for loop arthing, as required

Supplying and laying 25 mm x 5 mm GI strip at 0.5 m below ground as strip earth electrode including soldering etc. as required

Supplying and laying 25 mm x 6 mm GI strip at 0.5 m below ground as strip earth electrode including soldering etc. as required

Supplying and laying 25 mm x 5 mm copper strip in 40 mm dia GI pipe from earth electrode as required

Providing and fixing 25 mm x 5 mm copper strip on surface r in recess for coneections etc. as required

Providing and fixing 25 mm x 5 mm GI strip on surface or in recess for coneections etc. as required

Supplying and laying 32 mm x 6 mm GI strip at 0.5 m below ground as strip earth electrode including soldering etc. as required

Providing and fixing 32 mm x 6 mm GI strip on surface or in recess for coneections etc. as required

Supplying and laying 50 mm x 6 mm GI strip at 0.5 m below ground as strip earth electrode including soldering etc. as required

Providing and fixing 50 mm x 6 mm GI strip on surface or in recess for coneections etc. as required

Supplying and laying 75 mm x 6 mm GI strip at 0.5 m below ground as strip earth electrode including soldering etc. as required

Providing and fixing 75 mm x 6 mm GI strip on surface or in recess for coneections etc. as required

Providing and fixing earth bus of 50 mm x 5 mm copper strip on surface for connections etc as required

SITC Ligthing Protection System IS/IEC-62305, Roof - Horizontal Air Termination Air-termination Rod of material AlMgSi having length - 1000 mm, and Horizontal Aluminium Roof Conductor, of Diameter Ø8mm, Cross-section- 50 mm2, of Material- AlMgSi Conductor holder for Parapet wall/Side wall of Material- StSt, for rod size Roof Conductor holding clamp of material StSt to be installed only on SDS type Metal Roof -... Nos. Al Expansion Pieces for equalizing temperature related length changes Straight splicer with StSt hardwares suitable for Ø 8mm , to conduct two conductors, Round to Round, which are laid in line either on roof or on vertical walls -... Nos. TXL Connector with StSt hardwares suitable for Ø 8mm, to conduct two conductors, Round to Round, which are laid acrooss.Also to hold down conductors connected from roof conductors -..Nos. Vertical Conduction Vertical Aluminium Down Conductor, of Diameter Ø8mm, Cross-section- Conductor holder for Parapet wall/Side wall of Material- StSt, for rod size ø8-ø10 mm with accessories Screw and Gitty -...Nos. Straight splicer with StSt hardwares, to conduct two conductors, Round to Disconnecting clamp with StSt hardwares suitable for flat size upto 25 X 6 StSt Saddle / Holder for 25x6 mm to hold GI Strip -... nos. Lightning Flash Counter -1 No. Link to Earth Grid Ring GI flat (25x6mm) Strip. Having width- 25mm, Thickness- 6mm, Material- Hot dipped Galvanized Iron, Cross Section- 150 mm2 Coating thickness- Avg. 70 microns -... m

2 nos. -Dual source intelligent flush mounted panel meter three phase four wire (IPM) 415V CT/ PT site programmable class I flush mounted (96 x 96 mm) meter with voltage, current, frequency, power factor, ON hrs, kWh, EB and DG set metering with LED display (excluding CT'S) complete with RS 485 communication protocol, class 1 accuracy and wiring connections and mounting hardware on provided panels complete with calibration certificate from manufacturer. Shop Meter Panel -01-LHS Incoming 1 no.-FP 100 A -MCCB-16/25KA Electronic Type with TMR Protection with indication lamps Bus-bar 415V,TPN,50Hz,100 A Al Busbar Outgoing 15 nos. 25-63 A TPN -MCB-10 kA withTMR Protection

Main Panel -02-RHS Incoming 1 no.Grid Side-FP 630 A -MCCB-36KA Electronic Type with LSIg Protection with indication lamps 1 no.DG Side-FP 630 A -MCCB-36KA Electronic Type with LSIg Protection with indication lamps With Electrical & Mechanical interlocking. 1 no.-4 pole - 630A ATS with Controller with indication lamps Bus-bar 415V,TPN,50Hz,630 A Al Busbar Outgoing 1+1no.-TP+N 125A-MCCB-25 kA with with TMR Protection with indication lamps 1no.-TP+N 160 A-MCCB-25 kA with TMR Protection with indication lamps 2+1no.-TP+N 100 A- MCCB-25 kA with withTMR Protection with indication lamps 14 nos. 25-63 A TPN -MCCB-25 kA withTMR Protection with indication lamps 3 nos. -Dual source intelligent flush mounted panel meter three phase four wire (IPM) 415V CT/ PT site programmable class I flush mounted (96 x 96 mm) meter with voltage, current, frequency, power factor, ON hrs, kWh, EB and DG set metering with LED display (excluding CT'S) complete with RS 485 communication protocol, class 1 accuracy and wiring connections and mounting hardware on provided panels complete with calibration certificate from manufacturer. 1no. -SPD 1+2 type ,50kA

Shop Meter Panel -02-RHS Incoming 1 no.-FP 125 A -MCCB-16/25KA Electronic Type with TMR Protection with indication lamps Bus-bar 415V,TPN,50Hz,125 A Al Busbar Outgoing 17 nos. 25-63 A TPN -MCB-10 kA withTMR Protection 13 nos. -Dual source intelligent flush mounted panel meter three phase four wire (IPM) 415V CT/ PT site programmable class I flush mounted (96 x 96 mm) meter with voltage, current, frequency, power factor, ON hrs, kWh, EB and DG set metering with LED display (excluding CT'S) complete with RS 485 communication protocol, class 1 accuracy and wiring connections and mounting hardware on provided panels complete with calibration certificate from manufacturer.

SITC of Facade Lighting Panel(May Vary as per Façade Lighting Vendor) Incomer 63A TPN MCB with indication lamps Outgoing 10-20 A SP MCB- 30 Nos. 10-20 A TP MCB- 3 Nos. Space provision for DMX controllers & Splitters

SITC of FFS LT panel(In case of fire ,will start automatically, Includes connection to FAPA panel) 1 No. 400 A ATS with 400 A 2 nos. FP MCCB LSI electronic type with indication lamps Incomer 1 no.-TP+N 400 A-MCCB-36kA with LSI electronic type and with indication lamps Bus-bar 415V,TPN,50Hz,400 A Al Busbar Outgoing 3 no.x 45kW - Y/Δ starter comprising 160A 16/25 KA TP+N MCCB with thermal magnetic field adjustable, AC3 motor duty contactors, ..A O/L relay with SPP,Timer & accessories,with indication lamps,PB,SS etc. 2 no.-7.5 kW StarDelta starter with 40 A TPN MCCB 16 kA with thermal magnetic field adjustable, AC 3 duty contactors, Overload Relay …. A & accessories,with indication lamps ,PB,SS etc. 1 nos.-TP+N 16 to 100 A-MCCB-16kA with TMR Protection. 1 nos.- TP+N 160 A-MCCB-16/25kA with TMR Protection.

Supplying, erecting, testing & commisioning 315 kVAr(inlcude 50kVAR SVG unit )Hybrid APFC Panel with Hybrid Controller , 440 V, 3 phase, 50 Hz., APFC Panel with contactor logic consisting of 3,5,5,7,10,15,20,25,25,30,50,50 or suitable steps of APP type capacitor units with detuned (harmonic filter) 7% CU reactors of suitable rating, APFC panel shall be compliance to IEC 61439 and power quality IEC 61921 standard.(Refer SLD for More Details) Incomer MCCB Electrionic type.(Refer SLD for more details)

Supplying & erecting of Plumbing Lt Panel-1(Refer SLD for more details)(Without Starter) Incomer 40A TPN MCB -1 no. Outgoing 16-32A TPN MCB-10 nos.

Supplying & erecting of Plumbing Lt Panel-2(Refer SLD for more details)(Without Starter) Incomer 63A TPN MCB -1 no. Outgoing 16-32A SP MCB-2 nos. 16-32A TPN MCB-8 nos. 40A TPN MCB -1 no.

Supplying & erecting of Panel-1 for 1 PH (Refer SLD for more details) Incomer 63A TPN MCB -1 no.with indication lamps Outgoing 16-32A SP MCB-6 nos. 16-32A TPN MCB-4 nos.

Supplying & erecting of Panel-2 for 1 PH (Refer SLD for more details) Incomer 63A TPN MCB -1 no.with indication lamps Outgoing 16-32A SP MCB-8 nos. 16-32A TPN MCB-5 nos.

Supply of 3 core armoured PVC/XLPE insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. 3 Core 16 sq.mm

Supply of 3 1/2 core armoured PVC/XLPE insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. 3 1/2 Core 25 sq.mm

Supply of 3 1/2 core armoured PVC/XLPE insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. 3 1/2 Core 50 sq.mm

Supply of 3 1/2 core armoured PVC/XLPE insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. 3 1/2 Core 95 sq.mm

Supply of 3 1/2 core armoured PVC/XLPE insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. 3 1/2 Core 120 sq.mm

Supply of 3 1/2 core armoured PVC/XLPE insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. 3 1/2 Core 150 sq.mm

Supply of 4 core armoured PVC/XLPE insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. 4 Core 16 sq.mm

Supply of 3 core unarmoured PVC/XLPE insulated, PVC sheathed copper conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. 3 Core 2.5 sq.mm

Supply of 3 core unarmoured PVC/XLPE insulated, PVC sheathed copper conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. 3 Core 2.5 sq.mm

Supply of 3 core unarmoured PVC/XLPE insulated, PVC sheathed copper conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. 3 Core 6 sq.mm

Supply of 3 core armoured PVC/XLPE insulated, PVC sheathed copper conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. 3 Core 2.5 sq.mm

Supply of 3 core armoured PVC/XLPE insulated, PVC sheathed copper conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. 3 Core 4 sq.mm

Supply of 3 core armoured PVC/XLPE insulated, PVC sheathed copper conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. 3 Core 6 sq.mm

Supply of 4 core armoured PVC/XLPE insulated, PVC sheathed copper conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. 4 Core 2.5 sq.mm

Supply of 4 core armoured PVC/XLPE insulated, PVC sheathed copper conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. 4 Core 4 sq.mm

Supply of 4 core armoured PVC/XLPE insulated, PVC sheathed copper conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. 4 Core 6 sq.mm

Supply of 4 core armoured PVC/XLPE insulated, PVC sheathed copper conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. 4 Core 10 sq.mm

Supply of 4 core armoured PVC/XLPE insulated, PVC sheathed copper conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. 4 Core 16 sq.mm

Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm direct in ground including excavation in the form of a trench as per Cable Trench Drawing provided by the Engineer-Incharge,sand cushioning with screened sand bed of 20mm thick , protective covering with bricks placed breadth-wise on top of cable all over the run( the brick protection shall cover the cable and project atleast 5 cms over the sides of the cable) and backfilling the excavated earth without stones or hard material and making the surface proper with 15 cm crown on the top complete as required. (a) In soily strata

aying of one number additional PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm direct in ground in the same trench in one tier horizontal formation including excavation in the form of a trench as per Cable Trench Drawing provided by the Engineer-Incharge,sand cushioning with screened sand bed of 20mm thick , protective covering with bricks placed breadth-wise on top of cable all over the run( the brick protection shall cover the cable and project atleast 5 cms over the sides of the cable) and backfilling the excavated earth without stones or hard material and making the surface proper with 15 cm crown on the top complete as required. (a) In soily strata

Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm in the existing RCC/HUME/STONEWARE Metal pipe, etc. complete as required

Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size exceeding 25 sq.mm but not exceeding 400 sq.mm in the existing RCC/HUME/STONEWARE Metal pipe, etc. complete as required

Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm on surface, etc. complete as required

Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size exceeding 25 sq.mm but not exceeding 120 sq.mm in the existing masonry open duct, etc. complete as required

Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size exceeding 120 sq.mm but not exceeding 400 sq.mm on surface, etc. complete as required

Supplying and making cable end terminations with brass compression gland and copper lugs for folowing sizes of 3 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required. (1) 3 x 1.5/2.5 Sq. mm.

Supplying and making cable end terminations with brass compression gland and copper lugs for folowing sizes of 3 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required. 3 x 4 Sq. mm.

Supplying and making cable end terminations with brass compression gland and copper lugs for folowing sizes of 3 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required. (3) 3 x 6 Sq. mm.

Supplying and making cable end terminations with brass compression gland and copper lugs for folowing sizes of 4 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required. (1) 4 x 1.5/2.5 Sq. mm.

Supplying and making cable end terminations with brass compression gland and copper lugs for folowing sizes of 4 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required. 4 x 4 Sq. mm.

Supplying and making cable end terminations with brass compression gland and copper lugs for folowing sizes of 4 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required. 4 x 6 Sq. mm.

Supplying and making cable end terminations with brass compression gland and copper lugs for folowing sizes of 4 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required. (4) 4 x 10 Sq. mm.

Supplying and making cable end terminations with brass compression gland and copper lugs for folowing sizes of 4 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required. 4 x 16 Sq. mm.

Supplying and making cable end terminations with brass compression gland and aluminium lugs for folowing sizes of 3 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required. (5) 3 x 16 Sq. mm.

Supplying and making cable end terminations with brass compression gland and aluminium lugs for folowing sizes of 3 1/2 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required. (1) 3 1/2 x 25 Sq. mm.

Supplying and making cable end terminations with brass compression gland and aluminium lugs for folowing sizes of 3 1/2 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required. (3) 3 1/2 x 50 Sq. mm.

Supplying and making cable end terminations with brass compression gland and aluminium lugs for folowing sizes of 3 1/2 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required.(5) 3 1/2 x 95 Sq. mm.

Supplying and making cable end terminations with brass compression gland and aluminium lugs for folowing sizes of 3 1/2 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required. (6) 3 1/2 x 120 Sq. mm.

Supplying and making cable end terminations with brass compression gland and aluminium lugs for folowing sizes of 3 1/2 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required. (7) 3 1/2 x 150 Sq. mm.

Supplying and making cable end terminations with brass compression gland and aluminium lugs for folowing sizes of 4 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required. (5) 4 x 16 Sq. mm.

Supplying and Installing following size perforated type 16 SWG, M.S.cable tray of GI pregalvanised/hot dip galvanised/ powder coated finish, in convenient sections, joined with connectors, suspended from the ceiling with suitable MS suspenders including bolts and nuts, painting suspenders etc, complete as required. 150mm width x 50mm depth

Supplying and Installing following size perforated type 16 SWG, M.S.cable tray of GI pregalvanised/hot dip galvanised/ powder coated finish, in convenient sections, joined with connectors, suspended from the ceiling with suitable MS suspenders including bolts and nuts, painting suspenders etc, complete as required. 300mm width x 50mm depth

Supplying and Installing following size perforated type , M.S.cable tray bends of GI pregalvanised/hot dip galvanised/ powder coated finish, in convenient sections, joined with connectors, suspended from the ceiling with suitable MS suspenders including bolts and nuts, painting suspenders etc, complete as required. 150mm width x 50mm depth (16 SWG)

Supplying and Installing following size perforated type , M.S.cable tray bends of GI pregalvanised/hot dip galvanised/ powder coated finish, in convenient sections, joined with connectors, suspended from the ceiling with suitable MS suspenders including bolts and nuts, painting suspenders etc, complete as required. 300mm width x 50mm depth (16 SWG)

Supplying and Installing following size perforated type , M.S.cable tray reducers of GI pregalvanised/hot dip galvanised/ powder coated finish, in convenient sections, joined with connectors, suspended from the ceiling with suitable MS suspenders including bolts and nuts, painting suspenders etc, complete as required. 150mm width x 50mm depth (16 SWG)

Supplying and Installing following size perforated type , M.S.cable tray reducers of GI pregalvanised/hot dip galvanised/ powder coated finish, in convenient sections, joined with connectors, suspended from the ceiling with suitable MS suspenders including bolts and nuts, painting suspenders etc, complete as required. 300mm width x 50mm depth (16 SWG)

Supplying and Installing following size perforated type , M.S.cable tray tees of GI pregalvanised/hot dip galvanised/ powder coated finish, in convenient sections, joined with connectors, suspended from the ceiling with suitable MS suspenders including bolts and nuts, painting suspenders etc, complete as required. 150mm width x 50mm depth (16 SWG)

Supplying and Installing following size perforated type , M.S.cable tray tees of GI pregalvanised/hot dip galvanised/ powder coated finish, in convenient sections, joined with connectors, suspended from the ceiling with suitable MS suspenders including bolts and nuts, painting suspenders etc, complete as required. 300mm width x 50mm depth (16 SWG)

Providing & erecting hot dipped galvanised cover suitable for ladder/perforated type Cable tray manufactured from 18 SWG (1.2 mm thick) GI sheet of 150 mm width & 20 mm height complete with necessary hardware.

Providing & erecting hot dipped galvanised cover suitable for ladder/perforated type Cable tray manufactured from 18 SWG GI sheet of 300 mm width & 20 mm height complete with necessary hardware.

Supplying and erecting Outdoor type(IP65) Spike or without spike mounted fixture LED 3000K 100-240Vac CRI > 80 Input power: 3W, R/G/W/B options, 90lm/W, Dimension Ø60 mm x 80 mm x 98.5 mm Beam Angle: 20°/45°, inbuilt Electronic driver ON/OFF CE/CB, IP rating IP65, Mechanical resistance IK06. MATERIAL CHARACTERISTICS : Die - Cast aluminium housing with electrostatic powder coating & high quality temper glass with precise PMMA optics for light distribution . Ground mounting spike made of die cast aluminum. Electrostatic powder coated. This luminaire contains built-in LED modules. Operating ambient temperature range is from -40°C to +50°C. working humidity upto 95%. Manufacturer shall have inhouse lab approved by NABL or ministry of science of govt of India. LM 79 and LM80 reports need to be submitted from a NABL/UL accredited lab to verify above parameters. Both the fixture and Driver should have separate BIS approval .Complete with all accessories and Coated with epoxy zinc phosphate primer and finished using environmentally stable polyurethane based paint .

Supplying and erecting Outdoor type(IP65) Spike or without spike mounted fixture LED 3000K 100-240Vac CRI > 80 Input power: 6W, R/G/W/B options,90lm/W, Dimension Ø60 mm x 80 mm x 98.5 mm Beam Angle: 20°/45°, inbuilt Electronic driver ON/OFF CE/CB, IP rating IP65, Mechanical resistance IK06. MATERIAL CHARACTERISTICS : Die - Cast aluminium housing with electrostatic powder coating & high quality temper glass with precise PMMA optics for light distribution . Ground mounting spike made of die cast aluminum. Electrostatic powder coated. This luminaire contains built-in LED modules. Operating ambient temperature range is from -40°C to +50°C. working humidity upto 95%. Manufacturer shall have inhouse lab approved by NABL or ministry of science of govt of India. LM 79 and LM80 reports need to be submitted from a NABL/UL accredited lab to verify above parameters. Both the fixture and Driver should have separate BIS approval .Complete with all accessories and Coated with epoxy zinc phosphate primer and finished using environmentally stable polyurethane based paint .

Supplying and erecting Decorative Outdoor type(IP65) 10-12W LED Down type wall light fitting having Extruded and Die cast aluminium housing with high corrosion resistance surface finish with Integral control gear ,and with all necessary accessories .

Supply and erecting of High Pressure Die Cast Aluminium hosuing SMD LED Floodlight Luminaire of 70watt 8000 lumen, min efficacy 115lm/w, product with Compnay LOGO,Corelated Color Temp 5700k,CRI>70, dual optics glass + PC lens. Protection of Fixture:- IP66,IK07,Class I,Line Frequency 50 HZ,power factor >0.95, THD<10% at full load, HV Cut-off @320V/Low Voltage Cut-off, Surge protection 4KV. Manufacturer shall have inhouse lab approved by NABL or ministry of science of govt of India. LM 79 and LM80 reports need to be submitted from a NABL/UL accredited lab to verify above parameters. Fixture and driver have to be BIS certified .

Supplying and erecting Outdoor type Wall - Recess 24W LED,IP65, Diffuser : Clear Acrylic,wall light fitting having Extruded and Die cast aluminium housing with high corrosion resistance surface finish with Integral control gear ,Operating Voltage : 100-277Vac,Power Factor : ≥0.90 ,THD : <10% ,Surge Protection : 3KV and with all necessary accessories .

Supplying,installation,testing,commisioning of IP 67 60 W surface cylindrical luminaire UGR<19, Clear toughened glass,Polycarbonate optical lens and made up of pressure die cast aluminum housing with high efficiency, faceted clear surface, LED minimum efficacy at System level approx 120 lumens/watt , Life of fixture : 50000 burning Hrs. @ L70B50 Lumen maintenance, CCT of 3000/4000/6000K, CRI Ra >=70, PF >0.95, an Operating working temp range 0°C < Ta < 45°C & operating Voltage Range of 100-300 V AC. Minimum Internal Surge Protection 6KV. LM 79 and LM80 reports need to be submitted from a NABL/UL accredited lab to verify above parameters. Both the fixture and Driver should have separate BIS approval. ,having mounting arrangement with board for surface type or spring loaded mounting clips complete.

Supplying and erecting Concealed type Path Finder wall light Max. 6W having IP67. IK10 rated Pressure die cast housing having system , Diffuser-Translucent Acrylic,min. efficacy of 100 lumen/W, CRI>80, CCT upto 5000K, Beam Angle of 110 deg., THD<10%, SDCM<5, p.f. >0.95, operating range of 230-270V, surge protection of 2.5 kV, Life class of 25,000 Hrs. at L70B50, including driver by making necessary arrangement/recess in wall to make it flush with surface .

Supplying and erecting Concealed type foot/step light Max. 6W having IP67. IK10 rated Pressure die cast housing having system , Diffuser - Clear Acrylic,min. efficacy of 100 lumen/W, CRI>80, CCT upto 5000K, Beam Angle of 110 deg., THD<10%, SDCM<5, p.f. >0.95, operating range of 230-270V, surge protection of 2.5 kV, Life class of 25,000 Hrs. at L70B50, including driver by making necessary arrangement/recess in wall to make it flush with surface .

Supply ,Installation,Testing & Commisioning of 4.27 m high Decorative Hot Dip galvanised & Cast Iron/ Aluminium Combo pole(With EMBELLISHMENT at bottom & wherever possible) Suitable for post top mounting ,made from 76.1 mm. to 88.9 mm dia. cap G.I. Pipe, 0.6 m. in length duly welded with provided leads, with base plate & foundation bolts,OD-65 to 76MM,Complete with all required accessories like Junction box with 15A Input output connectors ,Pole will Be Painted with P U Paint as per GTDC color choice .etc.

Supply ,Installation,Testing & Commisioning LED decorative top mounting light fitting of 45-50W,including lamp, with PF > 0.95,class IP 65 and above Housing of pressure die cast aluminium alloy and heat sink extruded aluminium Complete with all required accessories.

Supplying and erecting Outdoor type IP 68 8W LED Under water light fitting , 80-90 lm/w , SS-ABS-Glass-Silicon housing,suitable watts driver, / power supply (if any),including gear box .Complete with all accessories and Coated with epoxy zinc phosphate primer and finished using environmentally stable polyurethane based paint .

Supply ,Installation,Testing & Commisioning of 4 m round Step Pole(Hot Dip galvanised) with Decorative bracket with base plate & foundation bolts,Bottom OD-114 mm,OD TOP-65 to 76MM,Complete with all required accessories like IP65 Junction box with 15A Input output connectors ,Pole will Be Painted with P U Paint as per GTDC color choice .etc.

Supply ,Installation,Testing & Commisioning LED decorative top mounting light fitting of 45-50W,including lamp, 100 lm/W ,with PF > 0.95,class IP 65 and above Housing of pressure die cast aluminium alloy and heat sink extruded aluminium Complete with all required accessories.

Supplying and erecting integrated LED flood light fitting Max. 100W IP65 & IK07 class having pressure die-cast aluminium housing, having system lumens output of Min. 12000 Lumens, min. efficacy of 120 lumen/W, CRI>70, CCT upto 6500K, THD<10%, p.f. >0.90, operating range of 140-270V, inbuilt surge protection of 4 kV, Life class of 50,000 Hrs. at L70B50, including driver with U shaped bracket with 3 Years warranty with bracket for wall mounting.(For Wall Illumination- 2 sides)

SITC of Cable Junction Boxes IP 66/67 “weather proof”(Size -155 x 210 x 92 (LXBXH)mm + Cable termination upto 16 Sqmm size.), for outdoor installation(with knockouts for cable entry) with all accessories.

Supplying and erecting LED Strip light Max. 45 W IP67 class having minimum lumens output of 800 Lumens/m, min. efficacy of 90 lumen/W, CRI>80, CCT upto 5000K, Beam Angle of 110 deg., THD0.95, operating range of 230-270V, Life class of 30,000 Hrs at L70B50 including driver accessories complete.

Supply of 15 kW Dual Gun Charger: > 7.4 kW X 2 gun > LCD Display > Three Phase 32A supply is required for the charger

Supply of 3.3 kW x 3 Socket Charger: > 3.3kW X 3 BAC 001 Socket > LCD Display > Three Phase 16A supply is required for the charger

Supply of 7.4 kW Single Gun Charger: > 7.4kW X 1 gun > Mounting: Wall mount / Stand

Installation ,Testing and commissioning all chargers at a time

Software /CMS Charges for 1 st year

Preparation of all drawings /slds/ Files for Govt Department for obtaining necessary approvel from RIO Electricity department, MRT margao etc. for of the scheme and releasing connection including submission of all documents by obtaining signature from from concerned authoriries in drawings and files and submission of necessary test report and other documents to RIO and Electricity Department.

Facade Lighting Fixtures and its accessories + Precise Lighting Projection & Sound system/Projection Mapping and Sound Show SITC of Facade Dynamic Lighting system-DMX operated (Successful Bidder shall give the Demo before any order finalisation.) Linear 1000MM length wall washer, exterior rated RGBW(6000-7000K), CRI80, wall washer light complete with all accessories if any; suitable for facade Lighting, dimension not exceeding 1000mm x 45mm x 45mm(Without Bracket) and 1000mm x 45mm x 115mm(With Bracket). Body: Die casted / extruded aluminium with embossed manufacturer logo, Seperate compartment for keeping the decoder/driver in the housing which can be easily removable for service without disturbing the LEDs/Optics, Painting : Chemical 3/7 tank processed treatment before the powder coat black/ash/approved color coat. Fixture will be suitable to operate in a temperature range of 0°C to 50°C, with Antiaging and anti-UV high optical efficiency PMMA lenses, Toughened transparent glass having the IK protection up to IK07. The system wattage not exceeding 36W and system lumen output of not less than 1980 lumens , 25x40 deg beam. Fixture should be available with other architectural optics with choice of beam angles of 30°, 40°,25° and 17° as per application requirement. Fixture shall have input voltage 24 VDC. Lifetime should be at least 50,000 burning hours L70 at 35°C. Fixture shall be IP66 protected & equipped with mechanical impact of minimum IK07. complying to BIS standard "IS 10322 (Part 5/Sec 1): 2012" and having CE certification against standard "Low Voltage Directive & Protective Equipment - EN 60598-1:2015", and "Electromagnetic Compatibility Directive - EN 61547: 2009", LM79, IK07, IP66, HV Certificates from NABL Acrediated laboratory. LED Makes should be CREE, LumilLED, Osram, Seoul, Nichia or equivalent with the engineer or 3rd party testing laboratory approval.

Linear 1107MM length wall washer, exterior rated RGBW(6000-7000K), CRI80, wall washer light complete with all accessories if any; suitable for facade Lighting, dimension not exceeding 1107mm x 108mm x 110mm(With back box). Body: Die casted / extruded aluminium with embossed manufacturer logo, Seperate compartment for keeping the decoder/driver in the housing which can be easily removable for service without disturbing the LEDs/Optics, Painting : Chemical 3/7 tank processed treatment before the powder coat black/ash/approved color coat. Fixture will be suitable to operate in a temperature range of 0°C to 50°C, with Antiaging and anti-UV high optical efficiency PMMA lenses, Toughened transparent glass having the IK protection up to IK10. The system wattage not exceeding 50W and system lumen output of not less than 2750 lumens , 25x40 deg beam. Fixture should be available with other architectural optics with choice of beam angles of 30°, 40°,25° and 17° as per application requirement. Fixture shall have input voltage 24 VDC. Lifetime should be at least 50,000 burning hours L70 at 35°C. Fixture shall be IP68 protected & equipped with mechanical impact of minimum IK10. complying to BIS standard "IS 10322 (Part 5/Sec 1): 2012" and having CE certification against standard "Low Voltage Directive & Protective Equipment - EN 60598-1:2015", and "Electromagnetic Compatibility Directive - EN 61547: 2009", LM79, IK10, IP68, HV Certificates from NABL Acrediated laboratory. LED Makes should be CREE, LumilLED, Osram, Seoul, Nichia or equivalent with the engineer or 3rd party testing laboratory approval.

In ground mounted 18W 3000K luminaire made up of die-casting with aluminum housing stainless steel trim frame with high quality tempered glass cover (8-14mm), dimension not exceeding Ø180mm H175mm with recess mounting box. The luminous flux of the luminaire is in the range of 1620lm±10%, Beam angle 30°, 15°. The ingress protection is IP67 and impact resistance of IK09. The luminaire is integrated with LED of CRI80. The integral potted driver comes with the power factor greater than or equal to 0.9 and a surge protection up to 2KV . The driver input voltage 110~240Vac at 50-60Hz and operating temperature of -40 ~ +50°C with CE/CB/EMC approbation. Life of the fixture should be 50K hours L70B50 @ ta 35°C. LM79, IK07, IP66, HV Certificates from NABL Acrediated laboratory. LED Makes should be CREE, LumilLED, Osram, Seoul, Nichia or equivalent with the engineer or 3rd party testing laboratory approval.

Multi color wash light, Protection Rating : IP66, complying to BIS standard "IS 10322 (Part 5/Sec 1): 2012" and having CE certification against standard "Low Voltage Directive & Protective Equipment - EN 60598-1:2015", and "Electromagnetic Compatibility Directive - EN 61547: 2009", Mounting Structure : Adjustable surface mount yoke arrangements for fixing the lights having the rotation degrees embosed in the die cast. Power consumption : 50W, CCT : RGBW(6000-7000K), (as per the design approval), Optics : PMMA with holder, Beam Angle : 25º/45º/60º, Control : DmX512 Channel : 4 CH, Body : Die casted / extruded aluminium with embossed manufacturer logo, Seperate compartment for keeping the decoder/driver in the housing which can be easily removable for service without disturbing the LEDs/Optics, Hot spot and light distribution : Optics Designed to minimize hot spots & fringing in color mixing applications. Power Input : Constant DC 24V with external driver to the constant current decoder, Surge Protection : Inbuilt surge protection in the driver 2KV-4KV(Additional if required will be added as per the requirement), Toughened transparent glass having the IK protection up to IK08, Painting : Chemical 3/7 tank processed treatment before the powder coat black/ash/approved color coat. Fixture will be suitable to operate in a temperature range of 0°C to 50°C, The light fixtures are having IP68 air vent made of stainless steel which helps to desiccate & prevent from forming moisture inside the light fixture at worst environmental condition. LED life should be at least 50,000 burning hours at L70 at 35 degree centigrade. Luminaire is inclusive of Integral male/female waterproof connectors with structures in pre wired conditions as per IS standard. PCB thickness must be 1.6mm, 35 micron Copper, 2W TC with Black or White masking, Copper /OSP finish. LM79, IK07, IP66, HV Certificates from NABL Acrediated laboratory. LED Makes should be CREE, LumilLED, Osram, Seoul, Nichia or equivalent with the engineer or 3rd party testing laboratory approval. Power & DMX Loop In/Out along with IP67 connector having the length >300mm.

Multi Color Neon Flexible light, Protection Rating : IP65, Mounting Structure : Adjustable wall mount SS clips for fixing the lights. Power consumption : 12W, CCT : RGB/RGBW, (as per the design approval) Beam Angle : 120º, Control : DmX512 Channel : 4 CH, Power Input : DC 24V with external driver, Surge Protection : Inbuilt surge protection 2KV-4KV(Additional if required will be added as per the requirement), Fixture will be suitable to operate in a temperature range of 0°C to 50°C , LED life time should be at least 50,000 burning hours at L70 at 25 degree centigrade. Luminaire is inclusive of Integral male/female waterproof connectors with structures in pre wired conditions as per IS standard. LED Makes should be CREE, LumilLED, Osram, Seoul, Epistar, Nichia or equivalent with the engineer or 3rd party testing laboratory approval..

20W multi color spot light, Protection Rating : IP66, complying to BIS standard "IS 10322 (Part 5/Sec 1): 2012" and having CE certification against standard "Low Voltage Directive & Protective Equipment - EN 60598-1:2015", and "Electromagnetic Compatibility Directive - EN 61547: 2009", Mounting Structure : Adjustable wall mount yoke arrangements for fixing the lights. Power consumption : 20W, CCT : RGBW, (as per the design approval) Optics : PMMA with holder, Beam Angle : 25º/45º/60º, Control : DmX512 Channel : 4 CH, Body : Die casted / extruded aluminium with embossed manufacturer logo, Seperate compartment for keeping the decoder/driver in the housing, Hot spot and light distribution : Optics Designed to minimize hot spots & fringing in color mixing applications. Power Input : DC 24V with external driver, Surge Protection : Inbuilt surge protection 2KV-4KV(Additional if required will be added as per the requirement), Toughened transparent glass having the IK protection up to IK05, Painting : Chemical 3/7 tank processed treatment before the powder coat black/ash/approved color coat. Fixture will be suitable to operate in a temperature range of 0°C to 50°C , LED life should be at least 50,000 burning hours at L70 at 25 degree centigrade. Luminaire is inclusive of Integral male/female waterproof connectors with structures in pre wired conditions as per IS standard. PCB thickness must be 1.6mm, 35 micron Copper, 2W TC with Black or White masking, Copper /OSP finish. LM79, IK05, IP66, HV Certificates from NABL Acrediated laboratory. LED Makes should be CREE, LumilLED, Osram, Seoul, Nichia or equivalent with the engineer or 3rd party testing laboratory approval. Power & DMX Loop In/Out along with IP67 connector having the length >400mm.

Din Rail Mount DMX controller can be used to control a wide variety of different DMX systems- from RGB/RGBW to more advanced moving and color mixing luminaires, 512 DmX channels in live mode (computer), stand alone mode with 1 area and 20 scenes, Mac OSx 10.6/10.7/10.8 - Windows XP/VISTA/SEVEN/8 32/64 bits and USB 2.0, XLR3, mini USB, Power From 5V to 5.5V DC (AC/DC adapter in option

DMX isolator or splitter provides Isolated optical DMX splitter provides 8 outputs from a 1 input and Input voltage: AC 110 to 220 V, 50 Hz, Product features: Group 1 & group 8 DMX signal change.

DMX signal amplifier for improving/amplifying the input signals through longer distances.

DMX 512 address writer for changing the color combination of the facade as per the design or site requirement.

IP driver box made up of PVC / UPVC for the internal terminations and external outgoing connecting points, with required PVC / brass glands, Optional suitable size MCB fitted for control outgoing circuits.

RJ45 comprises twisted pairs with shield support for carrying of data. RJ45 cabling is also known as twisted-pair Ethernet (TPE), unshielded twisted pair (UTP), and 10BASE-T cabling.

5 core DMX cable comprises twisted pairs with shield support for carrying of data. DMX512 cable is used for connecting all light consoles that use DMX 512 standard data transmission.

High quality DMX decoder, Power Input : DC 24V,

DC power driver for the above Lights, Power : 200W, Input : AC 110-240V AC, 50Hz, Output : DC 12/24V, Protection rating, IP67, Surge protection : LL 4KV, LE 6KV

PVC insulated multi core electrical un armored flexible 5C x 0.5Sq mm power cable having less electrical losses.

PVC insulated multi core electrical un armored flexible 3C x 1.5Sq mm power cable having less electrical losses. This PVC insulated and round sheathed wire features a bright multi strands copper conductors and it supports voltage grade up to 1100V.

PVC insulated multi core electrical un armored flexible 3C x 2.5Sq mm power cable having less electrical losses. This PVC insulated and round sheathed wire features a bright multi strands copper conductors and it supports voltage grade up to 1100V.

PROJECTOR SITC of Projector 1DLP, 1920X1200 native solution, min. 17500 lumens, laser phosphor digital projector with minimum 20000 hours light source,Contrast Ratio : up to 4000000 : 1, Motorized horizontal and vertical lens offset , Inputs: HDBaseT ,HDMI/DVI-D Controls: RS232 Ethernet should be complete with mounts and lens.

Weatherised enclosure for Equipment with fans and temperature sensors remote controlled with all accessories. PRODUCT Project Safe Projector Enclosures Size - Customized as per Projector Model Metal- Aluminium sheet 3.0mm Thick Projector Mount Slide- 125 kg capacity Air Filter- Hydrophobic Air Filters Glass- Anti reflecting Low Iron Extra Clear Glass (Tempered) Paint- Powder coated Ventilation- 200CFM, 360 CFM Fans Insulation- Non-fibrous, Non toxic cross linked polyethylene sheets 19mm thick Humidity & temperature control- Sensor based humidity and temperature control provided Dampers- On Horizontal enclosure only. Projector Power MCB- Schneider 32Ampere 2 Pole Control Power MCB- Schneider 10Ampere 2 pole Temperature Indicator- PID/RDM IP rating- Designed and Built as per IP 65 rating Suitable for Rain, Snow, Thunderstorm, Marine Environment

Providing projector mounting thiefproof and weatherproof stand upto 10ft height generally for projector protection, safety and necessary cable connection, of 165 mm dia 1200mm X 1200mm RCC foundation, 500mm X 500M base plate,Material - Mild steel with Epoxy coating and paint as final finish Conforming IS : 1239

Supply of 3D Projection mapping software, Playback control System to manage, schedule and control the media severs. It should have direct control on inputs and media timelines. It should have an option of being controlled by an external unit integrated with the software. to complete the job with all respects.

Supply of Display media server with HD outputs as required , synced together. It should be capable of capturing content. Original windows 10 embedded with i7 six core CPU with Rugged cooling system. with 16GB RAM, 2 nos 512 SSD drives raid 0 drives for media playback , 1 nos. 256 GB SSD for operating. It should also have genlock and framelock capability. Should also have Art-net Ethernet in/out. to complete the job with all respects.

Display server to control and provide output signals to projectors Server having multiple HDMI outputs to connect to the projectors and will have the dataton display system running

V5 Corvus with Initium Power Cable • 9 independent outlets stop Differential Mode cross contamination, • Suitable for High end Audio and AV systems, Central clean power, • network removes Common and Differential Mode mains noise, • Surge Protection, 45'000A instant protection, Fully Star Earthed Network, • RFI reduction 35dB, • Multi-strand 6n OFC silver-plated internal wiring with FEP dielectric, • SYSTEM LINK outlet for extending the outlets and maintaining a starred earth reference.

Plug and play 4K audio D-embed solution with full 18Gbps HDMI and HDCP support • Supports resolutions of up to 2160p 4:4:4/60 • Fully HDCP 2.2 compliant pass-through • HDMI audio de-embed featuring digital S/PDIF and left/right analog audio • Integrate multiple to create custom audio ecosystem • 3 gear sliding switch for easy audio EDID setting • Pass-through, 2ch and 5.1 • Automatic cable equalization and signal regenreation/compensation for optimal audio/video compatibility. • Dimensions- Height 22mm/0.86i, Width 80mm/3.15in, Depth 90mm/3.54in

4K 30HZ HD baseT HDMI Extender set for upto 100mtrs • Supports the latest UHD resolutions including HDR10, HDR 10+HLG and Dolby Vision formats • Extend 4K@60Hz (4:2:0) content up to 100/328ft meters using Cat6a cabling or higher • USB data transfers of up to 190Mbps for webcams and peripherals, • High-speed USB 2.0 pass-through up to 100 meters/328ft, Supports full CEC passthrough via TV remote to control connected AVequipment such as AVR volume or menu navigation • Backwards compatible with HDBaseT 1.0 transmission and receiving devices (lowest denominator takes priority) • LED indication for power supply to units, signal status to show established display connection, HDCP presence in signal and transmission link. Dimensions- Height 21mm/0.83in, Width 250mm/9.84in, Depth 90.2mm/3.55in,

• HDMI 4K cable - 18gbps • 3GSDI x 1 (BNC) • HDMI x 1 HDMI out Cable • Extension cord HDMI to VGA Port • HD Base T (RJ45 x 1) • RJ45 x 1 (Ethernet Control over wired network connection) • RS232 x 1 Cord • 3.5mm stereo female (provides serial communications and power) • AC line cord for projector Accessories • DC JACK 12VDC, 200 mA • wired remote jack • Christie One Mount Plus (140-117100-XX) • One Mount Extender Rod (121-125109) • One Mount Rigging Kit (used with One Mount, • One Mount Plus Extender Rod) (121-126100-XX) • Christie One Rigging Frame (140-113106-XX) • Fog Filter with Frame (003-005714-XX) • Fog Filter module (003-005715-XX)

CONTENT MAKING CHARGES 1] Creative Content development process, 2] Animation Development Process (Pre-Production, Production & Postproduction), 3] Projection Mapping Process. Details - 1) The creative content development process involves researching, planning, writing, creating, and editing information for a specific audience to enhance online engagement and effectiveness. This process encompasses developing and executing ideas to produce various forms of creative content such as films, music, art, and design. The scope of work includes gathering information through research to understand the target audience and market trends. It involves concept and script development to outline the content framework. Additionally, voice recording and storyboard creation are essential steps to visualize the content. The process also includes defining the visual style, animation, music, and sound effects to ensure the content is cohesive and engaging. 2) The animation development process involves creating animated films or TV shows through stages like concept development, scriptwriting, character design, animation, post-production, and distribution. This process translates written scripts and storyboard sketches into fully realized illustrations that capture the chosen visual style and brand essence. Meticulously crafted style frames convey emotion, expression, and storytelling nuances. The animation workflow involves a system of people, hardware, and software working sequentially to complete predetermined tasks within set time frames. Key steps include outlining and briefing, scripting and styling, storyboarding and preparation, animation and production, and finally, audio mixing and delivery. 3) Projection mapping is a technique used to transform objects, often irregularly shaped, into dynamic visual displays for video projection. This technique can be applied to a variety of surfaces, including complex industrial landscapes, buildings, indoor objects, and theatrical stages. It brings objects to life, creates immersive environments, and provides exciting interactive experiences by utilizing any surface as a display medium. The process involves using 3D mapping technology and machine vision to profile objects in three dimensions and map them in the real world. This includes creating a 3D model of the object, aligning images or videos using 3D or video editing software, and displaying them precisely onto physical surfaces. The key steps in the projection mapping process are surface preparation, 3D modelling, content creation, calibration, and projection. This method relies on visual perspective and aspect analysis to project complex objects onto simpler planes for captivating visual experiences.

The project involves fitting, installing, testing, and commissioning all materials supplied as per the provided quotation. This includes projectors, servers, cabling, mounting hardware, and control systems. All components must be installed according to specified measurements and configurations. Install all equipment and materials following the manufacturer's guidelines. Ensure secure and correct connections for power and data cabling. Mount projectors and related equipment in designated locations for optimal projection quality. Perform comprehensive testing to ensure all components function correctly. Calibrate the system to achieve high-quality output and alignment. Conduct a successful trial run in the presence of the concerned officer. Provide on-site training for two personnel on system operation and maintenance. Training will cover basic system operation, including starting and stopping the projection. Teach basic cabling connections necessary for system operation. Instruct on emergency shutdown procedures and troubleshooting common issues. Training will span two days to ensure personnel competency. Provide detailed documentation on installation, configuration, and operation. Ensure all work is completed under the guidance of the concerned officer. Obtain approval from the concerned officer upon project completion. The project is complete only after successful commissioning and approval by the concerned officer.

DIGITAL SIGNAL PROCESSOR SITC of 12 x 8 Networked Digital Signal Processor with 12 inputs and 8 outputs or more; 12 ormore Control Inputs and 6 or more Logic Outputs for GPIO Integration; 48V phantom power on all analog inputs; THD: <0.01% 20Hz to 20KHz; Crosstalk: <- 75dB or better; Open architecture software configurable; logic processing power; 2 digital audio bus RJ45 Port; 1Ethernet RJ45 port for Monitoring and configuration; Capable to handle +5V unloaded logic output voltage; Should have speech sense engine; Capable to control 3rd party devices with TCP IP and RS232; Should have 1nos of RS 232 port for integration with control System; Should have Bi-Directional Locate Functionality; Should have 48 or more digital audio Channel Bus; Should have monitoring LED for COM, STAT, ERR and PWR; etc. Approved Make: BSS / bi- amp / Symetrix

SITC of 4 Buttons Ethernet Contrio Wall Mount Controller with Volume Control knob. Approved Make: BSS / bi-amp / Symetrix

SITC of High Power 3-Way Loudspeaker with 15" LF; Frequency Response: (±3 dB): 45 Hz – 18 kHz, Frequency Range (-10dB): 38Hz – 20KHz; Coverage Pattern: 90° x 50°, rotatable waveguide, Crossover Modes: Tri-amp/Bi-amp switchable, Transducer Power Rating :LF 4000 W peak , MF 1400 W peak ,HF 400 W peak, LF Driver : 15”; MF Driver : 8” ; HF Driver : 1.5”; Sensitivity LF : 97dB; Sensitivity MF: 108dB; Sensitivity HF: 115dB; Maximum SPL: LF:133 dB peak , MF/HF: 139 dB peak, ; Nominal Impedance: 8 ohms, Grille: Powder coated 14 gauge perforated steel, Enclosure: Trapezoidal with 15 degree side angles. Approved Make: JBL / L- acoustic / d&b audiotechnik

SITC of Multichannel Digital Network Based Power Amplifier with Power output 4 x 1250W or better @ 4 Ohms / 8 Ohms; Should support 70Vrms and 100Vrms output on all output channels; THD 0.35% orbetter; Cooling Continuously variable speed forced air; Voltage Gain 34dB ormore; Digital bus compatibility up to 8 or more audio channel; bridgeable channels even in 100Vrms mode to operate with 200Vrms output; 2digital audio bus RJ 45 port; 1 Ethernet R 45 port for monitoring and configuration; Should have DSP features like Limiters , Input/output EQ , Delay ,Matrix Mixer ,Speaker Line Monitoring; Damping Factor (20Hz to 100Hz) : >1500 ormore; etc. Approved Make: Crown / RAM Audio / Powersoft

SITC of Multichannel Digital Network Based Power Amplifier with Power output 4 x 600W @ 4 Ohms / 8 Ohms or better; Should support 70Vrms and 100Vrms output on all four channels; Frequency Response: ±0.25dB or better; Total Harmonic Distortion: 0.35% or better; Voltage Gain: 34dB or better; Damping Factor(20Hz to100Hz): >1000 or better; Signal to Noise Ratio: >108dB or better; Cooling: Continuously variable speed forced air, front to back airflow; bridgeable channels even in 100Vrms mode to operate with 200Vrms output; 2digital audio bus RJ 45 port; 1 Ethernet R 45 port for monitoring and configuration; Should have DSP features like Limiters, Input/output EQ, Delay, Matrix Mixer, Speaker Line Monitoring. Approved Make: Crown / RAM Audio / Powersoft

SITC of High Power 3-Way Loudspeaker with 15" LF; Frequency Response: (±3 dB): 45 Hz – 18 kHz, Frequency Range (-10dB): 38Hz – 20KHz; Coverage Pattern: 90° x 50°, rotatable waveguide, Crossover Modes: Tri-amp/Bi-amp switchable, Transducer Power Rating :LF 4000 W peak , MF 1400 W peak ,HF 400 W peak, LF Driver : 15”; MF Driver : 8” ; HF Driver : 1.5”; Sensitivity LF : 97dB; Sensitivity MF: 108dB; Sensitivity HF: 115dB; Maximum SPL: LF:133 dB peak , MF/HF: 139 dB peak, ; Nominal Impedance: 8 ohms, Grille: Powder coated 14 gauge perforated steel, Enclosure: Trapezoidal with 15 degree side angles. Approved Make: JBL / L- acoustic / d&b audiotechnik

SITC of Multichannel Digital Network Based Power Amplifier with Power output 4 x 1250W or better @ 4 Ohms / 8 Ohms; Should support 70Vrms and 100Vrms output on all output channels; THD 0.35% orbetter; Cooling Continuously variable speed forced air; Voltage Gain 34dB ormore; Digital bus compatibility up to 8 or more audio channel; bridgeable channels even in 100Vrms mode to operate with 200Vrms output; 2digital audio bus RJ 45 port; 1 Ethernet R 45 port for monitoring and configuration; Should have DSP features like Limiters , Input/output EQ , Delay ,Matrix Mixer ,Speaker Line Monitoring; Damping Factor (20Hz to 100Hz) : >1500 ormore; etc. Approved Make: Crown / RAM Audio / Powersoft

SITC of Multichannel Digital Network Based Power Amplifier with Power output 4 x 600W @ 4 Ohms / 8 Ohms or better; Should support 70Vrms and 100Vrms output on all four channels; Frequency Response: ±0.25dB or better; Total Harmonic Distortion: 0.35% or better; Voltage Gain: 34dB or better; Damping Factor(20Hz to100Hz): >1000 or better; Signal to Noise Ratio: >108dB or better; Cooling: Continuously variable speed forced air, front to back airflow; bridgeable channels even in 100Vrms mode to operate with 200Vrms output; 2digital audio bus RJ 45 port; 1 Ethernet R 45 port for monitoring and configuration; Should have DSP features like Limiters, Input/output EQ, Delay, Matrix Mixer, Speaker Line Monitoring. Approved Make: Crown / RAM Audio / Powersoft

SITC of highpower install grade Dual 18" low frequency loudspeaker system with extended frequency range with mounting points for OEM hardware/ bracket. Frequency response: 20Hz to 1KHz (-10 dB) or better, Power rating: 2400W continuous or better; Sensitivity: 99dB or better; Maximum SPL: 135dB or better; Nominal Impedance: 4ohm in parallel and 2X8 ohm in driver mode; LF Driver 18" or better; LF driver with 4" voice coil. Approved Make: JBL / L-acoustic / d&b audiotechnik

SITC of Four-channel x 4000W @ 4Ω Power Amplifier, True Ethernet backbone – fast, reliable and scalable, Color LCD provides users with diagnostics and presets for easy setup, one USB port, Damping Factor :(10Hz to 100Hz) >5000, Signal to Noise Ratio ( 20Hz to 20kHz, A Weighted) :> -108dB, (THD) (full rated power, 20Hz to 20kHz) :0.35%, Intermodulation Distortion (from 9dB down to -40dB): 0.06%, Frequency Response (20Hz to 20kHz at 1W into 4/8Ω) :+/-0.25dB, Crosstalk (below rated power 20Hz to 1kHz): >80dB. Approved Make: Crown / RAM Audio / Powersoft

SITC of install grade All-Weather IP56 Compact 12" 2-Way Coaxial full range Loudspeaker with mounting points for OEM hardware/ bracket. Frequency: 55Hz – 20 kHz(-10 dB) or better; Directivity Index: 9.5 dB or better; System Power Rating: 400W or better; Sensitivity: 96dB or better; Nominal Impedance: 8 ohms; Inbuilt transformer 200W 70V/ 100V; Coverage: 90° x 90° or better; Maximum SPL: 128dB or better; LF driver:12" with 3" voice coil, HF Driver: 1". Approved Make: JBL / L-acoustics / d&b audiotechnik

Supply, installation, testing & Comissioning of 2-Way 1 x 15" LF; All-Weather High- Power Loudspeaker with Power rating 600W Continuous at 8 Ohms; Coverage 90° x 50°; Rotatable waveguide for vertical or horizontal orientation; Should support Frequency Range : 36Hz-20kHz ormore; Coverage Pattern (H) : 80 to 90 degree; Coverage Pattern (V): 40 to 50 degree or better; Power rating (pk): 2400W orbetter, Nominal Impedance: 8Ohms; should also support 70v/100V speaker connectivity with multiple power tapping 400W (max.); Max SPL (peak): HF 134dB or more, System Sensitivity (1W @ 1m): 100dB ormore; should supplied with OEM specific mounting bracket, etc. Approved Make: JBL / L-acoustic / d&b audiotechnik

SITC of Multichannel Digital Network Based Power Amplifier with Power output 4 x 1250W or better @ 4 Ohms / 8 Ohms; Should support 70Vrms and 100Vrms output on all output channels; THD 0.35% orbetter; Cooling Continuously variable speed forced air; Voltage Gain 34dB ormore; Digital bus compatibility up to 8 or more audio channel; bridgeable channels even in 100Vrms mode to operate with 200Vrms output; 2digital audio bus RJ 45 port; 1 Ethernet R 45 port for monitoring and configuration; Should have DSP features like Limiters , Input/output EQ , Delay ,Matrix Mixer ,Speaker Line Monitoring; Damping Factor (20Hz to 100Hz) : >1500 ormore; etc. Approved Make: Crown / RAM Audio / Powersoft

SITC of Multichannel Digital Network Based Power Amplifier with Power output 8 x 300W @ 4 Ohms / 8 Ohms or better; Should support 70Vrms and 100Vrms output on all Eight channels; THD 0.35% or better; Damping Factor (20 Hz to 100 Hz): >1000 or better; Frequency Response: ±0.25dB or better; Signal to Noise Ratio: >108dB or better; Cooling: Continuously variable speed forced air, front to back airflow; Voltage Gain: 34dB or better; Audio Digital channel bus compatibility up to 8 channel, bridgeable channels - even in 100Vrms mode, 2 digital audio bus RJ 45 port, 1 Ethernet R 45 port for monitoring and configuration, Should have Limiters, Input/output EQ, Delay, Matrix Mixer, Speaker Line Monitoring. Approved Make: Crown / RAM Audio / Powersoft Connectors and Accessories • HDMI 4K cable - 18gbps - 10nos • Power cables - 3coreX 1.5sq. mm • Audio cables - RCA - 10nos • CAT6 Cables • Patch chords - RJ45 - 25nos • XLR - Male to female connectors - 20nos • EP2RCA cables - 20nos • Cable manage - 10nos • Speakon connectors - 30nos

CD and USB Player 4K Ultra HD Blu-ray™ Player | UBP-X700 with High-Resolution Audio • Play 4K Ultra HD Blu-ray™ discs • Enjoy Music in High-Resolution Audio from any source • Wide coverage for video and music streaming services CD Player to play content music CD and with USB connectivity to play re programmed audio. Recommended brands: Sony/LG/ Panasonic/Pioneer

Audio Technica wireless mic + Transmitter / Receiver, Simple to set up and use, 2 x 4 channel frequency plan, Rack mountable for easy installation and Intuitive receiver and transmitter controls.

VALRACK -17U RACK ALONG WITH ALL ACCESSORIES

42U rack with Accessories, Valrack

Supplying, erecting, testing and commissioning of 30kVA capacity online pure sine wave, with backup time of half hrs. PWM & IGBT based UPS with 0.9 to unity output pf, 3 phase input and 3 phase output complete with all protections as per specification no. AP-UPS

Supplying and erecting 12V/100Ah SMF battery with battery terminal wire, duly charged complete.

Supply, installation, testing and commissioning of 2mm thickness HDG/powder coated GI JUNCTION BOX with cover of below suitable sizes. 150 X 150 X 50 to 70 MM

Supply, installation, testing and commissioning of IP 66 Floor box - 4 module(Include 6/16 A Switch & Socket,Blank Plate) ,Auto adjustable back box for installing IP66 floor boxes in concrete floors; supplied with cover; accepts conduit dia 20/25mm; min. screed height 65 mm ,IP55 cable exit acessory.

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in recessed PVC conduit(heavy) with modular switch, modular plates, suitable size modular GI box of specified Category and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group C -- with Cat A Modular Accessories

Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in recessed PVC conduit(heavy) with 2 way modular switch, modular plates, suitable size modular GI box of specified Category and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. with Cat A Modular accessories

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable in the independent recessed PVC conduit(heavy) of appropriate size as required. 2 x 2.5 sq.mm + 1 x 2.5 sq.mm earthwire (20mm Conduit)

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable in the independent recessed PVC conduit(heavy) of appropriate size as required. 2 x 4 sq.mm + 1 x 4 sq.mm earthwire (20mm Conduit)

Wiring for group controlled light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in recessed PVC conduit(heavy) and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in recessed PVC conduit(heavy) with MCB switch, , and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

Supplying and fixing following modular switch/ socket on the existing modular plate and switch box including connections but excluding modular plate etc. as required. 5/6 A switch Cat A

Supplying and fixing following modular switch/ socket on the existing modular plate and switch box including connections but excluding modular plate etc. as required. 15/16 A switch Cat A

Supplying and fixing following modular switch/ socket on the existing modular plate and switch box including connections but excluding modular plate etc. as required. 3 pin 5/6 A socket outlet Cat A

Supplying and fixing following modular switch/ socket on the existing modular plate and switch box including connections but excluding modular plate etc. as required. 6 pin 15/16 A socket outlet Cat A

Supplying and fixing following size modular GI box alongwith modular base and cover plate for modulator switches in recess etc. as required. (a) 1 or 2 Module ( 75 mm x 75 mm) Cat A

Supplying and fixing following size modular GI box alongwith modular base and cover plate for modulator switches in recess etc. as required. (b) 4 Module ( 125 mm x 7 mm) Cat A

Supplying and fixing following size modular GI box alongwith modular base and cover plate for modulator switches in recess etc. as required. (c) 6 Module (200mm x 75 mm) Cat A

Supplying and fixing following size modular GI box alongwith modular base and cover plate for modulator switches in recess etc. as required.(d) 8 Module ( 125 mm x 125 mm) Cat A

Supplying and fixing following size modular GI box alongwith modular base and cover plate for modulator switches in recess etc. as required. (e) 12 Module (200 mm x 150 mm) Cat A

Supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required Cat A

Supplying and fixing modular blanking plate on the existing modular plate switch box excluding modular plate etc. as required Cat A

20 mm dia GI pipe heavy class

Supply and erecting of 48 inch (1200mm sweep) ceiling fan, double ball bearing type, , complete with all accessories. Cat A

Supply and erecting of 56 inch (1400mm sweep) ceiling fan, double ball bearing type, , complete with all accessories. (a) Cat A

Supplying and erecting fan hook box of 10 mm M.S. round bar bounded to the R.C.C. bars upto 50 mm length each side and pierced through a 16 S.W.G. thick aluminium/M.S. Bowl 100 mm dia. or equivalent square size and having depth upto 75 mm complete erected with duly painted by one coat of red oxide paint and two coats of paint erected in position and without any leakage of slurry of cement concrete on either side of the box and positioned to the bottom level of the slab.

Supplying and fixing following way SPN sheet steel MCB distribution board 240 V on surface/ recess complete with tinned copper busbar neutral busbar earth bar dinnbar detachable gland plate interconnections phosphotized and powder painted including earthing etc. as required (but without MCB/RCCB/Isolator) (e) 4 way double door Cat A

Supplying and fixing following way SPN sheet steel MCB distribution board 240 V on surface/ recess complete with tinned copper busbar neutral busbar earth bar dinnbar detachable gland plate interconnections phosphotized and powder painted including earthing etc. as required (but without MCB/RCCB/Isolator) (f) 8 way double door Cat A

Supplying and fixing following way SPN sheet steel MCB distribution board 240 V on surface/ recess complete with tinned copper busbar neutral busbar earth bar dinnbar detachable gland plate interconnections phosphotized and powder painted including earthing etc. as required (but without MCB/RCCB/Isolator) (g) 12 way double door Cat A

Supplying and fixing following way SPN sheet steel MCB distribution board 240 V on surface/ recess complete with tinned copper busbar neutral busbar earth bar dinnbar detachable gland plate interconnections phosphotized and powder painted including earthing etc. as required (but without MCB/RCCB/Isolator) (h) 16 way double door Cat A

Supplying and fixing following way TPN sheet steel, double door, Horizontal type MCB distribution board 415 V on surface/ recess complete with tinned copper busbar neutral busbar earth bar dinnbar detachable gland plate interconnections phosphotized and powder painted including earthing etc. as required ( but without MCB/RCCB/Isolator) (b) 4 way (8+12), double door, Horizontal type Cat A

Supplying and fixing following way TPN sheet steel, double door, Horizontal type MCB distribution board 415 V on surface/ recess complete with tinned copper busbar neutral busbar earth bar dinnbar detachable gland plate interconnections phosphotized and powder painted including earthing etc. as required ( but without MCB/RCCB/Isolator)(c) 6 way (8+18), double door, Horizontal type Cat A

Supplying installation testing and commissioning of surface/ recess mounting vertical type 415 V TPN, double door MCB DB of sheet steel dust protected duly phosphatised and powder painted inclusive of 200 A tinned copper busbar common neutral link earth bar din bar for mounting MCBs detachable gland knock out plate and with 250 A 10 KA MCCB as incomer interconnection between incomer MCCB and busbars of following ways (but without MCCB/MCBs as required) (b) 8 way with 250A MCCB as Incomer double door Cat A

Providing and fixing following rating and breaking capacity adjustible 4 pole MCCB inside the existing cubicle panel board including drilling holes in cubicle panel making connections etc as required (c) 160 A Adjustable 35/40 KA, CAT A

Supplying and fixing 6 A to 32 A, C series MCB suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning etc as required.SP, Cat A

Supplying and fixing 6 A to 32 A, C series MCB suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning etc as required.(c) DP, Cat A

Supplying and fixing 6 A to 32 A, C series MCB suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning etc as required.TP, Cat A

Supplying and fixing 6 A to 32 A, C series MCB suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning etc as required.(e) TPN, Cat A

Supplying and fixing 40 A, C series MCB suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning etc as required.(c) DP, Cat A

Supplying and fixing 40 A, C series MCB suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning etc as required. TPN, Cat A

Supplying and fixing 63 A, C series MCB suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning etc as required. TPN, Cat A

Supplying and fixing following rating double pole (single pole and neutral) 240 V RCCB having a sensitivity current upto 300mA in the existing MCB DB complete with connections testing and commissioning etc as required(a) 25 A, Cat A

Supplying and fixing following rating double pole (single pole and neutral) 240 V RCCB having a sensitivity current upto 300mA in the existing MCB DB complete with connections testing and commissioning etc as required 40 A, Cat A

Supplying and fixing following rating four pole (triple pole and neutral) 415 V RCCB having a sensitivity current upto 300mA in the existing MCB DB complete with connections testing and commissioning etc as required 40 A, Cat A

Supplying and fixing following rating four pole (triple pole and neutral) 415 V RCCB having a sensitivity current upto 300mA in the existing MCB DB complete with connections testing and commissioning etc as required (c) 63 A, Cat A

Supplying and fixing SP blanking plate in the existing MCB DB complete as required.

Supplying and fixing following rating double pole 240 V isolator in the existing MCB DB complete with connections testing and commissioning etc as required, (a) 40 A, Cat A

Supply & Installation of Table POP UP BOX, 8M-1No. -6A Switch & Socket -POWER & 1No. -6A -Switch & Socket -UPS , 1HDMI ,1DATA, with all accessories complete.

Supply & Installation of IP 65 box with 32 A DP MCB & 2 nos. 16 A Sw & Soc, with all accessories complete.

Cable End Box suitable for SPN MCB DB, DD, 4 way, Cat A

Cable End Box suitable for SPN MCB DB, DD, 8 way, Cat A

Cable End Box suitable for SPN MCB DB, DD, 12 way, Cat A

Cable End Box suitable for TPN MCB DB, DD, 4 way, Cat A

Cable End Box suitable for TPN MCB DB, DD, 6 way, Cat A

Cable End Box suitable for TPN MCB DB, DD, 8 way, Cat A

Supply & installation of 6kVA ,1Ph IN - 1Ph OUT true Online UPS System in standalone configuration with advance DSP based technology’ Double conversion IGBT Rectifier and IGBT based inverter UPS system with cabinet and SMF battery backup for 30 mins. using 12V batteries including battery protection M.S Rack suitable dimension, standard rating cable for interlinks cable and D.C cable up to standard Length in mtrs from UPS to batteries including labour charges for installation testing and commission and carrying charges.

Supplying and erecting Bulk Head LED fitting Max. 10-12W with high transitivity diffuser with system lumens output of Min. 1100 lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., THD0.95, operating range of 140-260V, in built surge protection of 2.5 kV, Life class of 50,000 Hrs at L70B50, IP66, IK09 rated including driver IP66, IK09 rated on provided PVC Block / wooden board with accessories complete.

Supplying,installation,testing,commisioning of 18 W Suspended pendent light luminaire UGR<19 and beam angle 15 to 65° made up of pressure die cast aluminum housing with high efficiency, faceted clear surface, LED minimum efficacy at System level approx 120 lumens/watt , Life of fixture : 50000 burning Hrs. @ L70B50 Lumen maintenance, CCT of 3000/4000/6000K, CRI Ra >=80, PF >0.9, an Operating working temp range 0°C < Ta < 45°C & operating Voltage Range of 140-270 V AC. Minimum Internal Surge Protection 2.5KV. LM 79 and LM80 reports need to be submitted from a NABL/UL accredited lab to verify above parameters. Both the fixture and Driver should have separate BIS approval. ,having mounting arrangement with board for surface type complete.

Supplying and erecting LED Strip light Max. 45 W IP20 class having minimum lumens output of 800 Lumens/m, min. efficacy of 90 lumen/W, CRI>80, CCT upto 5000K, Beam Angle of 110 deg., THD<10,pF.0.95, operating range of 230- 270V, Life class of 30,000 Hrs at L70B50 including driver accessories complete.

Supplying,installation,testing,commisioning of 20 surface/recessed cylindrical luminaire UGR<19 and beam angle 15 to 65° made up of pressure die cast aluminum housing with high efficiency, faceted clear surface, LED minimum efficacy at System level approx 120 lumens/watt , Life of fixture : 50000 burning Hrs. @ L70B50 Lumen maintenance, CCT of 3000/4000/6000K, CRI Ra >=80, PF >0.9, an Operating working temp range 0°C < Ta < 45°C & operating Voltage Range of 140-270 V AC. Minimum Internal Surge Protection 2.5KV. LM 79 and LM80 reports need to be submitted from a NABL/UL accredited lab to verify above parameters. Both the fixture and Driver should have separate BIS approval. ,having mounting arrangement with board for surface type or spring loaded mounting clips complete.

Supplying and erecting LED square / circular Max. 12 W down lighter/Panel Light having pressure die-cast aluminium housing, polystyrene diffuser , min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, having mounting arrangement with board for surface type or spring loaded mounting clipscomplete.,having mounting arrangement with board for surface type or spring loaded mounting clips complete.

Supplying and erecting LED square / circular Max. 18 W down lighter/Panel Light having pressure die-cast aluminium housing, polystyrene diffuser , min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, having mounting arrangement with board for surface type or spring loaded mounting clipscomplete .,having mounting arrangement with board for surface type or spring loaded mounting clips complete.

SITC of Distinctive chandelier in nest glass with chrome & red copper finish. Material-Borosilicate double capsule glass inside, clear glass outside. The product comes with G9 lamp base and non-integrated lamps. Eight bulbs of max 33w each can be fixed in the chandelier.

Supplying and erecting Profile (AL Patti)flexible LED tape,Colour-WW/CDL/NW,5000 x 5 x 0.2 mm upto 1000 lumens /meter of any colour with driver & all related accessories complete.

Supplying,installation,testing,commisioning of 20 W Suspended/ Surface Cylindrical Light Fixture comprises of Extruded Aluminium housing with PMMA Diffuser,CCT-4000/5700/6500K, Aluminium End Caps/cable and Mounting arrangement - surface mounted or suspended arrangement , along with all the necessary accessories .

Supplying & erecting LED 18-20W tube light fitting (4 feet) with polycarbonate housing,efficacy=100 lm/w, heat sink, integrated HF electronic driver complete.

Supplying,installation,testing,commisioning of 15-20W COB LED Track Light in pressure diecast housing ,1500lm/WW,CW, NW with 1 m track , and all accessories.

Supplying & erecting UV Fly killer/ bug catcher Light Fitting having 2 x 20W UV Tube Lights to cover min. area of 500 sq.ft with powdered coated M.S./ steel body suitable to work on 230V, AC Supply having top mounting arrangement with SS chain complete and 3 core 1 mtr. flexible wire .

Supplying,installation,testing,commisioning of 30W Suspended Cylinderical pendent light luminaire UGR<19 and beam angle 15 to 65° made up of pressure die cast aluminum housing with high efficiency, faceted clear surface, LED minimum efficacy at System level approx 100 lumens/watt , Life of fixture : 50000 burning Hrs. @ L70B50 Lumen maintenance, CCT of 3000/4000/6000K, CRI Ra >=80, PF >0.9, an Operating working temp range 0°C < Ta < 45°C & operating Voltage Range of 140-270 V AC. Minimum Internal Surge Protection 2.5KV. LM 79 and LM80 reports need to be submitted from a NABL/UL accredited lab to verify above parameters. Both the fixture and Driver should have separate BIS approval ,having mounting arrangement with board for surface type complete.

Supplying,installation,testing,commisioning of 25 W (1.2 m)Linear LED TL ,110 lm/W aluminium extruded suspended light fixture with hanging accessories complete.

SITC of Electric Traction Passenger Lift with · Rated capacity :- 13 Passenger/884Kg · Floors :- B+G floor (2Stops/2 Landings) · Travel :- 3 to 4.2 mtrs. · Location of Lift Machine:- MR/MRL · Rated speed :- 1.0mps VS · Car/Landing door clear opening of 800/900 mm wide x 2000 mm high · Clear Car size of 1100mm wide x 2000mm deep x 2250mm high · Lift shaft available having clear size of 1800mm wide x 2300mm deep, 1600mm Pit depth, 4800mm Overhead. · Doors type :- COPO/TOPO Doors with frame made from SS 304 grade solid(non-claded) sheet of 1.5mm thick in hairline finish for car and all landing doors with SS door architraves/frames The lift doors shall have minimum 1 hour fire rating (with submission of necessary valid Test Certificate issued by NABL accredited or Independent Test laboratory)Lift car enclosure made from SS 304 grade solid(non-claded) sheet of 1.5mm, thick with hairline finish with frame made from MS girders, bracing of adequate size with minimum safety factor of 5, with Toe Guard Apron, with necessary false ceiling with LED lights having light intensity of at least 100 lux in car, blower/fan for ventilation & SS chequered plate flooring/PVC flooring/Granite flooring, handrails, mirror, emergency light etc. The lift car interior design shall be done as per the directions of engineer in charge. · COP with SS face plate having metallic push buttons with Braille Code & luminous indicator around button with FPI, scrolling UP/DN LED indicator & with / without attendant key switch, OWD with audiovisual

FIRE FIGHTING WORKS

Supplying, installation, testing and commissioning of Main Fire Pump suitable for water discharge of 2280 LPM/ 137 CuM/Hr at 70 m head driven by electric motor 415 volts, 3 phase 50 Hz, AC supply of 45 kW capacity for manual/ automatic operation and consisting of following: (a) Horizontal type, single stage, centrifugal/ split casing pump of cast iron body & bronze impeller with stainless steel shaft (SS410 grade), mechanical seal conforming to IS 1520. (b) Squirrel cage induction motor, TEFC, synchronous speed 2900 RPM, suitable for operation with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325. (c) M.S. fabricated common base plate, coupling, coupling guard, foundation bolts, matching hardware, matching suction & delivery flanges/ gaskets, etc. as required. (d) Erected on provided suitable size cement concrete foundation duly plastered with anti vibration pads with perfect aligning, proper levelling complete pump set with accessories duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003) complete. Refer Technical Specifications

Supplying, installation, testing and commissioning of Main Fire Pump suitable for water discharge of 2280 LPM at 70 m head driven by 70 HP or suitable HP capacity diesel engine at 2000 RPM working speed suitable for manual/ automatic operation and consisting of following : (a) Horizontal type, single stage, centrifugal casing pump of cast iron body & bronze impeller with stainless steel shaft (SS410 grade), mechanical seal conforming to IS 1520. (b) Water cooled with radiator, diesel engine conforming to relevant IS standard complete with auto starting mechanism, 12 volts DC electric starting equipment with battery of required AH capacity with necessary charger suitable to work on 230v, 50Hz AC supply, diesel tank of minimum 150 ltr capacity with first filling of diesel up to 100% level with necessary piping with valves up to engine , exhaust pipe extended up to 10 m outside pump house duly insulated with 50 mm thick glass wool with 1.0 mm thick aluminium sheet cladding, residential silencer, instruments and protection as per standard specification, stop solenoid for auto stop in the event of fault with audio indications etc. as required. (c) M.S. fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required. (d) Erected on provided suitable size cement concrete foundation duly plastered with anti vibration pads with perfect aligning, proper levelling complete pump set with engine assembly and accessories duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003) complete. Refer Technical Specifications

Supplying, installing, testing & commissioning of fabricated Diesel Engine Pump Fuel Oil Day Tank from 3 mm MS sheet and 24G secondary containment as per IS:2552 of 300 liters gross capacity & 250 liters fill capacity, externally painted with two coats of synthetic enamel paint over a coat of primer & internally with oil resistant paint. The tank shall be fitted with necessary fuel hoses, clear glass oil level indicator, inspection hole with cover, drain valve, air vent including structural supports (painted with approved shade) for tank and fill/ return/ drain connection valves, etc. Refer Technical Specifications

Providing & fixing, joining & testing, of heavy class-C M.S pipe IS:1239 marked in exhaust line of 100 mm dia. Diesel pump set,extended up to 10 m outside pump house duly insulated with 50 mm thick glass wool with chicken mesh & wire, followed by 1.0 mm thick aluminum sheet cladding. including cutting, welding etc. with MS butt welded fittings, providing clamp sand proper positioning of silencer and expansion bellows with nut-bolts as required. Refer Technical Specifications

Supplying, installation, testing and commissioning of Fire Jockey Pump suitable for water discharge of 180 LPM/ 10.8 CuM/Hr at 70 m head driven by electric motor 415 volts, 3 phase 50 Hz, AC supply of 7.5 kW capacity for manual/ automatic operation and consisting of following: (a) Horizontal type, single stage, centrifugal/ split casing pump of cast iron body & bronze impeller with stainless steel shaft (SS410 grade), mechanical seal conforming to IS 1520. (b) Squirrel cage induction motor, TEFC, synchronous speed 2900 RPM, suitable for operation with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325. (c) M.S. fabricated common base plate, coupling, coupling guard, foundation bolts, matching hardware, matching suction & delivery flanges/ gaskets, etc. as required. (d) Erected on provided suitable size cement concrete foundation duly plastered with anti vibration pads with perfect aligning, proper levelling complete pump set with accessories duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003) complete. Refer Technical Specifications

Supplying, installing, testing & commissioning of MS Black ERW following pipes, IS 3589, FE 330 Grade, Yield strength 195 MPa, plain end, for above ground internal pump room piping - fabrication of pipe in lengths to suit site condition & after bevelling the edges of pipes, welding including providing rectifier welding machine & using 3.15 mm electrode for root run & 2.5 mm for subsequent runs including taking & grinding, all fittings such as sockets, check nuts, elbows, bends, tees, reducers, enlarger, plugs, etc. confirming to IS:1239, part-2 and erction on MS/ concrete pedestal, duly clamped with M12 U bolts on vertical or horizontal runs and hydrotesting at 1.5 x working pressure and commissioning after painting with flow directions marking on pipes. Refer Technical Specifications. 200 mm dia NB, OD-219.1 mm, Thickness-6.3 mm, Weight-33.1 kg/m.- Suction piping

Supplying, installing, testing & commissioning of MS Black ERW following pipes, IS 1239 Part-1, Heavy duty, Class `C', for above ground internal pump room piping - fabrication of pipe in lengths to suit site condition & after bevelling pipes, welding including providing rectifier welding machine & using 3.15 mm electrode for root run & 2.5 mm for subsequent runs including taking & grinding, all fittings such as sockets, check nuts, elbows, bends, tees, reducers, enlarger, plugs, etc. confirming to IS:1239, part-2 and erection in along the wall/ column/ slab supported/ ground supported, duly clamped with M12 U bolts on vertical or horizontal runs and hydrotesting at 1.5 x working pressure and commissioning after painting with flow directions marking on pipes. Refer Technical Specifications. 150 mm dia NB, OD-max 166.5mm-min 163.9mm, Thickness-5.4 mm, Weight-21.3 kg/m.- Plain ends - Delivery side piping

100 mm dia NB, OD-max 115mm-min 113.1mm, Thickness-5.4 mm, Weight-14.5 kg/m.- Plain ends- Test Line

80 mm dia NB, OD-max 89.5mm-min 88mm, Thickness-4.8 mm, Weight-9.9 kg/m.- Plain ends- Jockey pump suction

65 mm dia NB, OD-max 76.6mm-min75.3mm, Thickness-4.5 mm, Weight-7.93 kg/m.- Plain ends

50 mm dia NB, OD-max 60.8mm-min 59.7mm, Thickness-4.5 mm, Weight-6.19 kg/m.- Plain ends (Screwed at site)- Jockey pump delivery & test line, Air Vessel line.

40 mm dia NB, OD-max 48.8mm min 47.9mm, Thickness-4.0 mm, Weight-4.37 kg/m.- Plain ends (Screwed at site)

32 mm dia NB, OD-max 42.9mm min 42mm, Thickness-4.0 mm, Weight-3.79 kg/m.- Plain ends (Screwed at site)

25 mm dia NB, OD-max 34.2mm min 33.3mm, Thickness-4.0 mm, Weight-2.93 kg/m.- Plain ends (Screwed at site)

Supplying, installing, testing & commissioning of Bituminous Primer (200 gms/SqM). For under ground piping. Application of including provision of hand tool for surface cleaning & brush for application of primer.

Supplying, installing, testing & commissioning of 2 mm thick tape to IS 10221 App B, tar based polymeric mix based on high tensile strength HMHDPE thermofusible material in 500 mm width. For Under ground piping. Application of including provision of LPG gas in cylinders & nozzle with piping, wrapping in 2 layers in oppostite direction with 15% overlap & thermal fusing in situ. Refer Technical Specifications

Supplying, installing, testing & commissioning of Alkayd air drying primer compatible with finish paint (20 sqM per Liters, 25 micron DFT) for above ground piping. Application of including provision of hand tool for surface cleaning & brush for application of primer in 2 coats each of 25 micron DFT. Drying time shall be considered as 8 hrs or as suggested by paint manufacturer.

Supplying, installing, testing & commissioning of Alkayd finish paint shade 101 (Sky Blue) in IS 2379 & IS 5 (20 sqM per Liters-25 micron DFT) or as per owner's practice in existing plant for Above ground piping. Application of including provision of brush for application of finish coat in 2 coats each of 25 micron DFT. Drying time shall be considered as 8 hrs or as suggested by paint manufacturer.

Supplying, installing, testing and commissioning of Rubber Expansion Bellows of following sizes for water media, EPDM/ Nitrile material, flange connection, dual arch, suitable for up to 70 deg C temp., Axial/ Lateral/ Torsional- flexibility, pressure range-16 Mpa including nuts, bolts and washers complete as required. complete as directed & specified as per the direction of engineer in charge. Refer Technical Specifications. 200 mm dia- main pump suction pipe

Supplying, installing, testing and commissioning of Rubber Expansion Bellows of following sizes for water media, EPDM/ Nitrile material, flange connection, dual arch, suitable for up to 70 deg C temp., Axial/ Lateral/ Torsional- flexibility, pressure range-16 Mpa including nuts, bolts and washers complete as required. complete as directed & specified as per the direction of engineer in charge. Refer Technical Specifications. 200 mm dia- main pump suction pipe

Supplying, installing, testing and commissioning of Rubber Expansion Bellows of following sizes for water media, EPDM/ Nitrile material, flange connection, dual arch, suitable for up to 70 deg C temp., Axial/ Lateral/ Torsional- flexibility, pressure range-16 Mpa including nuts, bolts and washers complete as required. complete as directed & specified as per the direction of engineer in charge. Refer Technical Specifications. 200 mm dia- main pump suction pipe

Supplying, installing, testing and commissioning of Rubber Expansion Bellows of following sizes for water media, EPDM/ Nitrile material, flange connection, dual arch, suitable for up to 70 deg C temp., Axial/ Lateral/ Torsional- flexibility, pressure range-16 Mpa including nuts, bolts and washers complete as required. complete as directed & specified as per the direction of engineer in charge. Refer Technical Specifications. 200 mm dia- main pump suction pipe

Supplying, installing, testing & commissioning of Lever operated Leak Proof Wafer type C.I. Butterfly Valve PN 16 class, with CI260/SGI IS 1865-400/15 Body & seat, EPDM Body lining, SS IS 6603 Gr12 Cr 12 shaft, conforming to IS 13095 / BS 593 of following sizes. including provision & welding of matching flange to BS 10 Table D, providing fasteners to IS nut bolts to IS 1363 PT1 Class 4.62, gaskets to IS 638 Type 2, with tag nos as per P & ID. Refer Technical Specifications. 200 mm dia - pump suction side

Supplying, installing, testing & commissioning of Lever operated Leak Proof Wafer type C.I. Butterfly Valve PN 16 class, with CI260/SGI IS 1865-400/15 Body & seat, EPDM Body lining, SS IS 6603 Gr12 Cr 12 shaft, conforming to IS 13095 / BS 593 of following sizes. including provision & welding of matching flange to BS 10 Table D, providing fasteners to IS nut bolts to IS 1363 PT1 Class 4.62, gaskets to IS 638 Type 2, with tag nos as per P & ID. Refer Technical Specifications. 150 mm dia. - pump delivery side and 4-way fire brigade connection

Supplying, installing, testing & commissioning of Lever operated Leak Proof Wafer type C.I. Butterfly Valve PN 16 class, with CI260/SGI IS 1865-400/15 Body & seat, EPDM Body lining, SS IS 6603 Gr12 Cr 12 shaft, conforming to IS 13095 / BS 593 of following sizes. including provision & welding of matching flange to BS 10 Table D, providing fasteners to IS nut bolts to IS 1363 PT1 Class 4.62, gaskets to IS 638 Type 2, with tag nos as per P & ID. Refer Technical Specifications. 100 mm dia.- test line

Supplying, installing, testing & commissioning of Lever operated Leak Proof Wafer type C.I. Butterfly Valve PN 16 class, with CI260/SGI IS 1865-400/15 Body & seat, EPDM Body lining, SS IS 6603 Gr12 Cr 12 shaft, conforming to IS 13095 / BS 593 of following sizes. including provision & welding of matching flange to BS 10 Table D, providing fasteners to IS nut bolts to IS 1363 PT1 Class 4.62, gaskets to IS 638 Type 2, with tag nos as per P & ID. Refer Technical Specifications. 80 mm dia - Jockey pump suction side

Supplying, installing, testing & commissioning of Lever operated Leak Proof Wafer type C.I. Butterfly Valve PN 16 class, with CI260/SGI IS 1865-400/15 Body & seat, EPDM Body lining, SS IS 6603 Gr12 Cr 12 shaft, conforming to IS 13095 / BS 593 of following sizes. including provision & welding of matching flange to BS 10 Table D, providing fasteners to IS nut bolts to IS 1363 PT1 Class 4.62, gaskets to IS 638 Type 2, with tag nos as per P & ID. Refer Technical Specifications. 50 mm dia. - Jockey pump delivery side

Supplying, installing, testing & commissioning of double flange Non Return Valve PN 16 class of following sizes Conforming to IS: 5312 (Part-I), Universal mounting (Hroz/ Vert) having CI to IS 210Gr260 Body and Bronze IS318 Gr LTB Disc with nut bolts to IS 1363 PT1 Class 4.6, Matching flanges to BS 10 Table D, Gaskets & Body ring Nitrile to IS:638 Type B, fasteners, etc. and tested to 1.5 times of working pressure in an approved manner, with tag nos as per P & ID. Refer Technical Specifications. 150 mm dia. - main pump delivery side

Supplying, installing, testing & commissioning of double flange Non Return Valve PN 16 class of following sizes Conforming to IS: 5312 (Part-I), Universal mounting (Hroz/ Vert) having CI to IS 210Gr260 Body and Bronze IS318 Gr LTB Disc with nut bolts to IS 1363 PT1 Class 4.6, Matching flanges to BS 10 Table D, Gaskets & Body ring Nitrile to IS:638 Type B, fasteners, etc. and tested to 1.5 times of working pressure in an approved manner, with tag nos as per P & ID. Refer Technical Specifications. 150 mm dia. - main pump delivery side

Supplying, installing, testing & commissioning of double flange Non Return Valve PN 16 class of following sizes Conforming to IS: 5312 (Part-I), Universal mounting (Hroz/ Vert) having CI to IS 210Gr260 Body and Bronze IS318 Gr LTB Disc with nut bolts to IS 1363 PT1 Class 4.6, Matching flanges to BS 10 Table D, Gaskets & Body ring Nitrile to IS:638 Type B, fasteners, etc. and tested to 1.5 times of working pressure in an approved manner, with tag nos as per P & ID. Refer Technical Specifications. 150 mm dia. - main pump delivery side

Supplying & installing gun metal Gate Valve of 50 mm dia. having threaded ends, conforming to IS: 778, ISI mark, along with G.I. threaded nipple. For Air vessel pipe. Refer Technical Specifications

Supplying, installing, testing & commissioning of PN 16 Cast Iron, factory made, flanged Y type strainer of 200 mm NB, on suction pipe with SS 304 strainer having 3 mm holes with companion flange set of 2 flanges to IS 1538 and on sprinkler mains including welding of matching flange BS 10 Table D & providing fasteners to IS 1363 grade 5.6/8.8 & rubber gaskets to IS 2172 grade W/3. Refer Technical Specifications

Supplying and installing Air Vessel of 300 mm dia and 1.5 mtr. in height M.S. Tank fabricated from M.S. black ERW pipe, conforming to I.S.: 3589, having 6 mm thickness, dish end at both ends, duly welded with 300 mm dia pipe, having inlet of 100 mm dia, duly fitted with 100 mm dia sluice valve and 20/25 mm dia draw in with G.M. gate valve, to be installed inside pump house along with provided M.S. angle (75 x 75 x 5 mm) tripod. Refer Technical Specifications

Supplying, installing, testing & commissioning of GM body and inlet in CI, 4 way Fire Brigade Inlet connection with NRV of 7 kG/cm2 working pressure and test pressure 10.5 kG/cm2, Header of 150 mm dia, M.S. ‘C’ class pipe having 4 Nos. of 150 mm manifold for outlets with built in spring loaded NRV & 150 NB butterfly Isolation valve with 150 mm dia flange, fitted with 4 nos. of 63 mm diameter instantaneous male inlet connection is provided at connected to Fire UG tank for fill the tank, complete with Matching flanges to BS 10 Table D, Gaskets & Body ring Nitrile to IS:638 Type B, fasteners, etc Refer Technical Specifications

Supplying, installing, testing & commissioning of UL/ FM approved Pressure Gauge of 100 mm dia., liquid filled 0-10 bar. Fitted with 15 mm dia. root cock valve, and G.I. pipe, elbow, snubber, process piping etc. as per requirement in an approved manner. Refer Technical Specifications

Supplying, installing, testing & commissioning of UL/ FM approved Pressure Switch for pump control with 2 NO + 2 NC contacts, 12/15 mm dia. process connection for 3Cx1.5 sqmm cable, operation range 0-10 bar, with 12/15 mm dia. root valve, G.I. nipple, elbow, snubber, process piping etc. in an approved manner. Refer Technical Specifications

Supplying, fabricating and erecting in position structral steel works for supporting of various sizes of MS pipes on brick wall/ RCC wall/ Slab, All structural steel members (including cleats, brackets, sag rods, bracings, stays etc.) shall be shot-blasted, steel work with necessary joists, channels, angles L-sections, plates, chequered plates , gusset plates, rivots, chemical anchor fastners , bolts, nuts, washers, anchor bolts, including cutting, welding, for all heights and levels in all type of structural steel. The structural steel shall be cleaned and applied two coats of approved Epoxy Paint at shop to provide minimum Dry Film thickness of 50 ± 5 micron for each coat. The interval between two coats should be 24 hours. Total paint thickness shall not be less than 150 micron DFT at any surface. The surfaces at connections (laps) shall receive both the coats properly at shop. Final touch up of same color shall be made after erection also. The scope is inclusive of minor civil work as required, supply of GI hardware materials, consumables, tools & tackles and necessary labour.

Supplying, Installing, Testing and Commissioning of Dial type water level indicator with potantial free contacts for underground RCC water tank up to 3.0 M depth comprising float in side a SS stilling well attached to SS rope & other end attached to drum with tensioned spring operating Red pointer thriugh a gear mechanism on powder coated Al dial with black graduations & numerals having 10mm accuracy complete with 2 nos 5A/230V AC adustable contacts & 4-20 mA transmitter with 2% accuracy. Refer Technical Specifications

Supplying, installing, testing & commissioning of wall/ column/ ground mounted Outdoor Hose Cabinet of 16 gauge, CRCA sheet of 450mm x 450mm ht x 250mm suitable to house 1 no 15 M hoses, hand control branch pipe with 4 mm thick glass visor, industrial key lock, chrome plated double leaf door handles, internal 2 coats of synthetic enamel white paint in 25 micron DFT each & 2 coats external synthetic enamel paint of 25 micron DFT in shade 536 of IS 5. The work includes Fabration & erection of ground mounted back frame steel structure or wall mounted with painting as also support grouting as per the site condition @ installing so that bottom of box is 900 mm above ground Refer Technical Specifications

Supplying, installing, testing & commissioning of SS Single Headed Hydrant Valve, oblique type single outlet, with a flow of 900 LPM @ 7 bar flow having 63 mm instantaneous female coupling outlet & fitted with accessories of cap, chain etc. to IS 5290. Single outlet hydrants on 80 nb @ height of 1.2 M above ground including providing & welding of matching flange to BS 10 Table F,providing fasteners to IS 1363 grade 5.6/8.8 & rubber gaskets to IS 2172 grade W/3. Refer Technical Specifications

Supplying, installing, testing & commissioning of RRL hose pipes 63 mm dia, 15 m in length, Type-A, reinforced rubber lined, to IS 636 complete with male female instantaneous copper wire bound coupling of 63 nb size in SS 304 conforming to IS 903. hoses in external/ internal hose cabinet. Refer Technical Specifications

Supplying, installing, testing & commissioning of SS 304 branch pipe of 63 mm x 42.5 fitted & to IS 903 with SS 304 Jet nozzle with 42.4 mm x 20 mm size having 6 M throw & to IS 903. branch pipe in external/ internal hose cabinet. Refer Technical Specifications

Supplying, installing, testing & commissioning of Pendant/ Recessed, UL/FM certified, SRSC sprinklers, chrome finish, K- factor 80 @ 0.5 bar (2.25 LPM @ 84 SqM), Temperature 68 Deg C, 4.5M x 4.5M, 1/2" NPT, including olet fittings & rosette plates. Refer Technical Specifications

Supplying, installing, testing & commissioning of 150 mm dia. constant pressure Alarm Valve UL listed, flange x flange, suitable for vertical installation on Sprinkler riser, Housing/ Cover/ Clapper Ductile Iron, Seat SS, Gaskets/ Seat EPDM, body flanges drilled to ANSI 16.5 # 150 complete with hydraulic & alarm trim with matching flanged drilled to complete with Test & Alarm trim & providing & welding of matching flanges to BS10 Table D, providing fasteners to IS 1363 grade, 5.6/8.8 & rubber gaskets to IS 2172 grade W/3. Refer Technical Specifications

Supplying, installing, testing & commisssioning of insertion type vane Flow Switch of 150 mm dia UL listed pipe insertion type suitable for 30 bar pressure for velocity up to 6 M/Sec, trigger flow of 15 LPM with IP 55 switch box having 2 SPDT contacts rated at 1.5 A, 24 V DC. complete with all accessories. Refer Technical Specifications

Supplying, installing, testing and commissioning of Test and Drain valve of 50 mm dia threaded brass body, ball type, suitable to k-factor 80, sight glass, between sprinkler header & 50 mm dia. drainage line including piping connections, cutting, threading etc, complete as required. Refer Technical Specifications

Supplying, installing, testing & commissioning of forged brass 20 mm dia. Air Release Valve, 8.8 bar System pressure, threaded full bore, forged brass body/ Chamber/ Cover- IS 6912 Gr. FLB, Float/ Lock/ Hinge/ Pin- Polypropylene, Spring SS304, Ring-Nitrile, Strainer-Plastic. Refer Technical Specifications

Supplying & erecting of bronze Ball Valves of 25 mm dia., threaded, full bore, two pieces, Quarter turn, Mild Steel lever operated. Refer Technical Specifications

Supplying, installing, testing & commissioning of horizontal, vertical spray down type Water Curtain Nozzles of K45, 3.5 bar, fan shaped spray pattern, 5.5 m linear coverage one side, spaced at 2.5 M, along with all accessories for complete functioning of water curtain system. Refer Technical Specifications

Supplying, installing, testing & commissioning of Deluge Valve of 80 mm dia, Ductile Iron-ASTM A 536, Double Flange, Wet Pilot, Vertical mounting, Basic Wet Pilot Trim, Electrical Solenoid Vlve Trim with Test & Alarm Trim and Drip & Drain Trim& companion matching flanges & fasteners. Refer Technical Specifications

Supply of 2 core unarmoured PVC/XLPE insulated, PVC sheathed copper conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554 (Part I), IS:7098 (Part I) with latest amendments of following size. '2 Core 1.5 sqmm

Supply and making cable end terminations with compression gland and copper lugs for following sizes of PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required. '(1) 2 x 1.5 Sq. mm.

Supplying & installing of ABC Type Fire Extinguisher Cap. 6 kg Filled with Mono Ammonium Phosphate Powder 50% confirms to IS 4308, Stored Pressure Type, UGTS Pressure Gauge, Discharge Time 24 Sec, Controllable discharge mechanism, Jet Range 5 Meters, Average Discharge is 92%, applicable on Class A,B & C and electrically started Fire, Fire Rating 4A:144B, Can Construction : Deep drawn & CO2 Mig welded, EPDM Rubber Hose with both end Aluminum clamped, Internal Coating - Epoxy Powder coating, External Coating - Pure Polyester Powder coating (UV Resistant), Brass forged valves with safety Pin is of SS material, Made up from 2mm thick sheet, ISI Approved IS 15683:2018.

Supplying & installing of CO2 High Pressure Portable 4.5 kg Fire Extinguisher, filled with Co2 Gas as per IS 15222, Control discharge mechanism fitted with 1 Meter Wire Braided Hose & Flat Horn with Diffuser Nozzle for dispersed discharge of CO2, Discharge Time 12 Sec, Average Discharge is 95%, Applicable on Class B, C and electrically started Fire, Fire Rating 55B, Internal coating is not applicable & External coating is of enamel spray painting, Powder Coated Handle, Valve Confirm to IS 3224 ISI Marked, CO2 Cylinder construction: hot spinning by seamless pipes & bearing ISI mark, Body confirms to IS 7285 and PESO APPROVED, Extinguishers confirmed to IS 15683:2018 and ISI marked.

Supplying & installing of Mechanical Foam stored pressure type 9 ltr. Fire Extinguisher filled with AFFF Foam confirms to IS 4989 (Part-II). Applicable fire class A & B, UTGS Pressure Gauge, Discharge Time 35 Sec, Controllable discharge mechanism, Jet Range 7 Meters, Average Discharge is 95%, Fire Rating- 4A:144B, Can Construction : Deep drawn & CO2 Mig welded, Controllable discharge mechanism with EPDM Hose & Air aspirated Nozzle, External Pure polyester powder coated (UV resistant) and Internal Plastic lining, Brass forged valves with safety Pin is of SS material, Made up from 2 mm thick sheet, As pe IS 15683:2018 and ISI Marked.

Supplying & installing of Mechanical Foam type 45 ltr. Fire Extinguisher filled with AFFF Foam (6%), trolley mounted, Applicable fire class A&B, Controllable Discharge mechanism, Discharge Time min. 30-160 Sec, Jet Range 9 Meters, Average Discharge is 95%, Fitted with EPDM Hose with SS spring of 300mm to avoid kink (4 meter long) & Air aspirated Nozzle, CO2 gas Cartridge of 300 grams. Confirms to IS 4947, External Pure polyester (UV Resistant) and Internal Epoxy polyester powder coated, Brass forged cap, and Welding Procedure approved by TPI with 6G certification. Confroms to IS 16018:2012,Fire rating 20A:233B

Earthwork in excavation for laying fire piping for hydrant & sprinkler, excavation by mechanical means (hydraulic excavator) or manual, (not exceeding 1.5m width or 10 SqM) for all leads & lifts in all type of strata comprising of any type of materials either in full or part as the case may be adopting any method / methods as may be convenient as permitted excluding blasting in all conditions such as dry, moist, foul, saturated, submerged, etc,. including backfilling, levelling, dosing, spreading, dressing of sides, shoring, planking, strutting, timbering, ramming of bottom, pumping and bailing out water, barricading danger lighting guarding, getting out excavated soil & stacking as directed by Engineer for all levels, all leads & lifts etc. including all taxes, royelty, etc complete.

Constructing RCC pedestal for above ground piping (top above 0.45m from GL), including excavation, PCC, Concrete, shuttering, plastering above ground, steel, ISMC 150 on top of concrete pedestal, backfilling and complete as per drawing & engineer. For Three Pipe, 600mm L x 300mm W x 900mm H,

Constructing RCC pedestal for above ground piping (top above 0.45m from GL), including excavation, PCC, Concrete, shuttering, plastering above ground, steel, ISMC 150 on top of concrete pedestal, backfilling and complete as per drawing & engineer. For Two Pipe, 400mm L x 300mm W x 900mm H,

Constructing RCC pedestal for above ground piping (top above 0.45m from GL), including excavation, PCC, Concrete, shuttering, plastering above ground, steel, ISMC 150 on top of concrete pedestal, backfilling and complete as per drawing & engineer. For One Pipe, 300mm L x 300mm W x 900mm H,

Supplying, fabricating & installing of M.S. Support, for MS piping supported on Brick/ Concrete compound wall consisting with suitable size of mild steel angles, channels, flat plate, nut bolts etc..along with anchor, rod, etc. complete as per drawing & engineers instructions. The design shall consider span, weight of water filled pipe, cantilever arm etc. The structure shall be painted with 1 coat primer & 2 coats MIO & Final coat as explained elsewhere under painting.

Providing at store or site work non-pressure RCC pipes of with collar joints conforming to IS:458-2003 revised as per amendment No.11 , including freight, carting, loading, unloading, stacking etc. complete. 'NP3 250

Conveying carefully from stack at site, 250m from both sides rolling and lowering into trenches, laying and jointing true to line and level, RCC spun pressure and non-pressure pipes of various classes, specials including collar and perfect linking of joint with jack to correct position including cost of jointing material in cement mortar 1:2, necessary hydraulic testing, curing of cement mortar etc. complete. 'Nominal diameter in mm 250

Providing, transporting, unloading, shifting, fabricating, hoisting and erecting in position structral steel works for supporting of various sizes of MS pipes, All structural steel members (including cleats, brackets, sag rods, bracings, stays etc.) shall be shot-blasted, steel work with necessary joists, channels, angles L-sections, plates, chequered plates , gusset plates, rivots, chemical anchor fastners , bolts, nuts, washers, anchor bolts, including cutting, welding, for all heights and levels in all type of structural steel. The structural steel shall be cleaned and applied two coats of approved Epoxy Paint at shop to provide minimum Dry Film thickness of 50 ± 5 micron for each coat. The interval between two coats should be 24 hours. Total paint thickness shall not be less than 150 micron DFT at any surface. The surfaces at connections (laps) shall receive both the coats properly at shop. Final touch up of same color shall be made after erection also. The scope is inclusive of minor civil work as required, supply of GI hardware materials, consumables, tools & tackles and necessary labour.

Supplying, installing, testing and commissioning of 2 Zones Microprocessor based Conventional Fire Alarm Control Panel confrming to UL 864 & NFPA 72 complete with SMPS (Switch Mode Power Supply) of suitable battery (2x12V) 24V, 24 AH capacity maintenance free battery as standby supply to switch over automatically for a period of 8 hours in case of A.C. supply failure to panel with 7 AH capacity battery charger, panel shall have following features. a) 2 L 16 CHR Dot Matrix LCD display b) 4 nos IDC class B circuits c) 2 nos. Class B NAC circuits d) 1 no. C/O Fire Contact e) 1 no. C/O Fault Contact f) 1 no. 24V DC output g) 1 no. RS 485 output h) 1No. Built in electronic hooters of 2 tone round for fire condition and single tone for fault condition. i) Visual zone on fire. j) Acknowledge reset and test devices. k) Fire condition (l) Fault condition (m) A.C. Pilot indication (n) Low battery indication (o) Blown fuse indication A.C. as well as D.C. (p) Open and short circuit fault. (q) Push button switch for checking each zone. (r) Push button to disable audio alarm. (s) Reset push button.

Supplying, erecting, testing, and commissioning Pill Box With Break Glass, Push Button. Manual Call Point is manually operated device used to initiate an alarm signal, 24V operating voltage, operating current 30mA, red colour, plastic material with glass cover, 1 nos No & NC contacts. .

Supply and erecting wall mounted ABS plastic, Sounder with back box, red colour, 24V operating voltage, operating current- 40mA max, 100dB at 1M sound level, fire engine siren, Piezo Electric Type sounder, Refer Technical Specifications

Supplying, installing, testing and commissioning of FR, XLPE armoured cable 2 core 1.5 sq.mm. copper conductor complete erected on wall/ ceiling complete.

Providing and fixing of the following Photoluminescent (Autoglow) Signages made up of Rigid Sheet ARS 10000 (GA) of 1 mm thick Sheet, it should resist temperature -20 to +80°C with having Life: 15 - 20 Years ( Indoor Use) with self Extinguishing, non radioactive, non peelable, non scratchable, non breakable, UV cured silk screen printed as per PSPA Class - A/DIN 67510 Part 2/60 Minutes/>700. And also Certified By Government of India Lab for a glow period > 24 Hrs, DRDO certified confirm as per the IS 9457-2005, IS 12349 & and getting material sample approval by Local Office of Fire & Services. The sinages shall be pasted on 4 mm thick ACP sheet of required size and then fixed on the door/ wall with 12 mm SS stud /SS mirror screw arrangement / 3m Tape or suspended from the ceiling by means of SS chain of 8 mm dia with anchor fasteners as per site conditions complete as required. All the materials shall be of approved make. All works complete as per the drawing, specification and direction of the Engineer. Note: Before procuring the sinages material, sample approval to be taken by LOCAL FIRE DEPARTMENT. DANGER SIGNAGES SIZE – 250mm (HT) X 200mm(L)

Providing and fixing of the following Photoluminescent (Autoglow) Signages made up of Rigid Sheet ARS 10000 (GA) of 1 mm thick Sheet, it should resist temperature -20 to +80°C with having Life: 15 - 20 Years ( Indoor Use) with self Extinguishing, non radioactive, non peelable, non scratchable, non breakable, UV cured silk screen printed as per PSPA Class - A/DIN 67510 Part 2/60 Minutes/>700. And also Certified By Government of India Lab for a glow period > 24 Hrs, DRDO certified confirm as per the IS 9457-2005, IS 12349 & and getting material sample approval by Local Office of Fire & Services. The sinages shall be pasted on 4 mm thick ACP sheet of required size and then fixed on the door/ wall with 12 mm SS stud /SS mirror screw arrangement / 3m Tape or suspended from the ceiling by means of SS chain of 8 mm dia with anchor fasteners as per site conditions complete as required. All the materials shall be of approved make. All works complete as per the drawing, specification and direction of the Engineer. Note: Before procuring the sinages material, sample approval to be taken by LOCAL FIRE DEPARTMENT. NO SMOKING SIZE – 150mm (HT) X 400mm(L)

Providing and fixing of the following Photoluminescent (Autoglow) Signages made up of Rigid Sheet ARS 10000 (GA) of 1 mm thick Sheet, it should resist temperature -20 to +80°C with having Life: 15 - 20 Years ( Indoor Use) with self Extinguishing, non radioactive, non peelable, non scratchable, non breakable, UV cured silk screen printed as per PSPA Class - A/DIN 67510 Part 2/60 Minutes/>700. And also Certified By Government of India Lab for a glow period > 24 Hrs, DRDO certified confirm as per the IS 9457-2005, IS 12349 & and getting material sample approval by Local Office of Fire & Services. The sinages shall be pasted on 4 mm thick ACP sheet of required size and then fixed on the door/ wall with 12 mm SS stud /SS mirror screw arrangement / 3m Tape or suspended from the ceiling by means of SS chain of 8 mm dia with anchor fasteners as per site conditions complete as required. All the materials shall be of approved make. All works complete as per the drawing, specification and direction of the Engineer. Note: Before procuring the sinages material, sample approval to be taken by LOCAL FIRE DEPARTMENT. EXIT SIGNAGE SIZE – 300mm(L) x 100mm(HT)

Providing and fixing of the following Photoluminescent (Autoglow) Signages made up of Rigid Sheet ARS 10000 (GA) of 1 mm thick Sheet, it should resist temperature -20 to +80°C with having Life: 15 - 20 Years ( Indoor Use) with self Extinguishing, non radioactive, non peelable, non scratchable, non breakable, UV cured silk screen printed as per PSPA Class - A/DIN 67510 Part 2/60 Minutes/>700. And also Certified By Government of India Lab for a glow period > 24 Hrs, DRDO certified confirm as per the IS 9457-2005, IS 12349 & and getting material sample approval by Local Office of Fire & Services. The sinages shall be pasted on 4 mm thick ACP sheet of required size and then fixed on the door/ wall with 12 mm SS stud /SS mirror screw arrangement / 3m Tape or suspended from the ceiling by means of SS chain of 8 mm dia with anchor fasteners as per site conditions complete as required. All the materials shall be of approved make. All works complete as per the drawing, specification and direction of the Engineer. Note: Before procuring the sinages material, sample approval to be taken by LOCAL FIRE DEPARTMENT. STAIRCASE IDENTIFICATION SIGNAGE (DOWN/ UP) SIZE – 300mm(L) x 100mm(HT)

Providing and fixing of the following Photoluminescent (Autoglow) Signages made up of Rigid Sheet ARS 10000 (GA) of 1 mm thick Sheet, it should resist temperature -20 to +80°C with having Life: 15 - 20 Years ( Indoor Use) with self Extinguishing, non radioactive, non peelable, non scratchable, non breakable, UV cured silk screen printed as per PSPA Class - A/DIN 67510 Part 2/60 Minutes/>700. And also Certified By Government of India Lab for a glow period > 24 Hrs, DRDO certified confirm as per the IS 9457-2005, IS 12349 & and getting material sample approval by Local Office of Fire & Services. The sinages shall be pasted on 4 mm thick ACP sheet of required size and then fixed on the door/ wall with 12 mm SS stud /SS mirror screw arrangement / 3m Tape or suspended from the ceiling by means of SS chain of 8 mm dia with anchor fasteners as per site conditions complete as required. All the materials shall be of approved make. All works complete as per the drawing, specification and direction of the Engineer. Note: Before procuring the sinages material, sample approval to be taken by LOCAL FIRE DEPARTMENT. FIRE EXTINGUISHER SIGNAGE SIZE – 200mm(L) x 250mm(HT)

Providing and fixing of the following Photoluminescent (Autoglow) Signages made up of Rigid Sheet ARS 10000 (GA) of 1 mm thick Sheet, it should resist temperature -20 to +80°C with having Life: 15 - 20 Years ( Indoor Use) with self Extinguishing, non radioactive, non peelable, non scratchable, non breakable, UV cured silk screen printed as per PSPA Class - A/DIN 67510 Part 2/60 Minutes/>700. And also Certified By Government of India Lab for a glow period > 24 Hrs, DRDO certified confirm as per the IS 9457-2005, IS 12349 & and getting material sample approval by Local Office of Fire & Services. The sinages shall be pasted on 4 mm thick ACP sheet of required size and then fixed on the door/ wall with 12 mm SS stud /SS mirror screw arrangement / 3m Tape or suspended from the ceiling by means of SS chain of 8 mm dia with anchor fasteners as per site conditions complete as required. All the materials shall be of approved make. All works complete as per the drawing, specification and direction of the Engineer. Note: Before procuring the sinages material, sample approval to be taken by LOCAL FIRE DEPARTMENT. DIRECTIONAL EXIT SIGNAGE Size – 300mm(L) x 100mm(HT)

Providing and fixing of the following Photoluminescent (Autoglow) Signages made up of Rigid Sheet ARS 10000 (GA) of 1 mm thick Sheet, it should resist temperature -20 to +80°C with having Life: 15 - 20 Years ( Indoor Use) with self Extinguishing, non radioactive, non peelable, non scratchable, non breakable, UV cured silk screen printed as per PSPA Class - A/DIN 67510 Part 2/60 Minutes/>700. And also Certified By Government of India Lab for a glow period > 24 Hrs, DRDO certified confirm as per the IS 9457-2005, IS 12349 & and getting material sample approval by Local Office of Fire & Services. The sinages shall be pasted on 4 mm thick ACP sheet of required size and then fixed on the door/ wall with 12 mm SS stud /SS mirror screw arrangement / 3m Tape or suspended from the ceiling by means of SS chain of 8 mm dia with anchor fasteners as per site conditions complete as required. All the materials shall be of approved make. All works complete as per the drawing, specification and direction of the Engineer. Note: Before procuring the sinages material, sample approval to be taken by LOCAL FIRE DEPARTMENT. FIRE ALARM SIGNAGE SIZE – 200mm(L) x 250mm(HT)

HVAC WORKS

INVERTER DX UNIT - 3 STAR RATING Supply, installation, testing and commissioning of INVERTER TYPE Split A.C. with R-32 refrigerant, complete with following component. Out door Unit should have Inverter Compresser, high efficiency finned tinned condensors. Fins should be with anti corrosive coating with all electrical accessories ready for connection to incoming cable. The entire unit shall be in a weather proof, powder coated body & installed on suitable stand as per location. Unit should be charged with necessary refrigerent gas & oil. The indoor units will be complete in all respect including filter, LCD wireless remote control, aerodynamically balanced blower. The unit should have air filter. Exposed units & grills will be aesthetically finished with powder coating of specified colour. Hiwall Unit for Green Room-1.0 TR

INVERTER DX UNIT - 3 STAR RATING Supply, installation, testing and commissioning of INVERTER TYPE Split A.C. with R-32 refrigerant, complete with following component. Out door Unit should have Inverter Compresser, high efficiency finned tinned condensors. Fins should be with anti corrosive coating with all electrical accessories ready for connection to incoming cable. The entire unit shall be in a weather proof, powder coated body & installed on suitable stand as per location. Unit should be charged with necessary refrigerent gas & oil. The indoor units will be complete in all respect including filter, LCD wireless remote control, aerodynamically balanced blower. The unit should have air filter. Exposed units & grills will be aesthetically finished with powder coating of specified colour. Hiwall Unit for Green Room-1.0 TRHiwall Unit for Green Rooms -1.5 TR

INVERTER DX UNIT - 3 STAR RATING Supply, installation, testing and commissioning of INVERTER TYPE Split A.C. with R-32 refrigerant, complete with following component. Out door Unit should have Inverter Compresser, high efficiency finned tinned condensors. Fins should be with anti corrosive coating with all electrical accessories ready for connection to incoming cable. The entire unit shall be in a weather proof, powder coated body & installed on suitable stand as per location. Unit should be charged with necessary refrigerent gas & oil. The indoor units will be complete in all respect including filter, LCD wireless remote control, aerodynamically balanced blower. The unit should have air filter. Exposed units & grills will be aesthetically finished with powder coating of specified colour. Hiwall Unit for Administration/Ticketing Room -1.5 TR

INVERTER DX UNIT - 3 STAR RATING Supply, installation, testing and commissioning of INVERTER TYPE Split A.C. with R-32 refrigerant, complete with following component. Out door Unit should have Inverter Compresser, high efficiency finned tinned condensors. Fins should be with anti corrosive coating with all electrical accessories ready for connection to incoming cable. The entire unit shall be in a weather proof, powder coated body & installed on suitable stand as per location. Unit should be charged with necessary refrigerent gas & oil. The indoor units will be complete in all respect including filter, LCD wireless remote control, aerodynamically balanced blower. The unit should have air filter. Exposed units & grills will be aesthetically finished with powder coating of specified colour.Hiwall Unit for Control Room -1.5 TR

INVERTER DX UNIT - 3 STAR RATING Supply, installation, testing and commissioning of INVERTER TYPE Split A.C. with R-32 refrigerant, complete with following component. Out door Unit should have Inverter Compresser, high efficiency finned tinned condensors. Fins should be with anti corrosive coating with all electrical accessories ready for connection to incoming cable. The entire unit shall be in a weather proof, powder coated body & installed on suitable stand as per location. Unit should be charged with necessary refrigerent gas & oil. The indoor units will be complete in all respect including filter, LCD wireless remote control, aerodynamically balanced blower. The unit should have air filter. Exposed units & grills will be aesthetically finished with powder coating of specified colour. Hiwall Unit for Shops -1.5 TR

INVERTER DX UNIT - 3 STAR RATING Supply, installation, testing and commissioning of INVERTER TYPE Split A.C. with R-32 refrigerant, complete with following component. Out door Unit should have Inverter Compresser, high efficiency finned tinned condensors. Fins should be with anti corrosive coating with all electrical accessories ready for connection to incoming cable. The entire unit shall be in a weather proof, powder coated body & installed on suitable stand as per location. Unit should be charged with necessary refrigerent gas & oil. The indoor units will be complete in all respect including filter, LCD wireless remote control, aerodynamically balanced blower. The unit should have air filter. Exposed units & grills will be aesthetically finished with powder coating of specified colour. Hiwall Unit for Server Room -1.5 TR (1W+1S)

INVERTER DX UNIT - 3 STAR RATING Supply, installation, testing and commissioning of INVERTER TYPE Split A.C. with R-32 refrigerant, complete with following component. Out door Unit should have Inverter Compresser, high efficiency finned tinned condensors. Fins should be with anti corrosive coating with all electrical accessories ready for connection to incoming cable. The entire unit shall be in a weather proof, powder coated body & installed on suitable stand as per location. Unit should be charged with necessary refrigerent gas & oil. The indoor units will be complete in all respect including filter, LCD wireless remote control, aerodynamically balanced blower. The unit should have air filter. Exposed units & grills will be aesthetically finished with powder coating of specified colour. Hiwall Unit for UPS Room -1.5 TR (1W+1S)

INVERTER DX UNIT - 3 STAR RATING Supply, installation, testing and commissioning of INVERTER TYPE Split A.C. with R-32 refrigerant, complete with following component. Out door Unit should have Inverter Compresser, high efficiency finned tinned condensors. Fins should be with anti corrosive coating with all electrical accessories ready for connection to incoming cable. The entire unit shall be in a weather proof, powder coated body & installed on suitable stand as per location. Unit should be charged with necessary refrigerent gas & oil. The indoor units will be complete in all respect including filter, LCD wireless remote control, aerodynamically balanced blower. The unit should have air filter. Exposed units & grills will be aesthetically finished with powder coating of specified colour. Hiwall Unit for Audio Visual Room-2.0 TR

VENTILATION FANS, Supply, installation, testing & commissioning of Direct Driven Rectangular cabinet Inline fans, AMCA certified for Air (AMCA 210) & Sound (AMCA 300) performance with an AMCA seal on the Fan with backward curved impeller. Impeller should be backward curved with aluminum blades. The motor and impeller assembly shall be dynamically balanced by according to VDI 2060 with quality 2.5. Min. Gents & Ladies Toilet, 2500 cfm @ 10mm of W.C ,Exhaust Fan

VENTILATION FANS, Supply, installation, testing & commissioning of Direct Driven Rectangular cabinet Inline fans, AMCA certified for Air (AMCA 210) & Sound (AMCA 300) performance with an AMCA seal on the Fan with backward curved impeller. Impeller should be backward curved with aluminum blades. The motor and impeller assembly shall be dynamically balanced by according to VDI 2060 with quality 2.5. Pump Room, 1500 cfm @ 10mm of W.C ,Exhaust Fan

Supply ,Installation, Testing and Commissioning of square plate type propeller fan complete with gravity louver , protection guard at inlet , external rotor motor , IP54 motor with class F insulation, other accessories required , Fan static - 3mm to 5mm WC. Shops & Utility Room-300 cfm

Supply ,Installation, Testing and Commissioning of square plate type propeller fan complete with gravity louver , protection guard at inlet , external rotor motor , IP54 motor with class F insulation, other accessories required , Fan static - 3mm to 5mm WC. Toilets-100 cfm

Supply,Installation, testing & commissioning of Dual Speed Induction Centrifugal type Jet Fan suitable for standard temperature applications (CO exhaust) as well as for 300 Deg C high temperature applications (smoke exhaust 300°C/2h). The high temperature certification of fans should be in accordance with a latest version of EN 12101-3: 2015. The motor shall run on the electrical power suitable for 50Hz. The motor shall be dual speed, IP 55, Class-H certified for 300°C/2h. The fans should have protection guards at inlet & outlet side.The complete assembly must have certificate of consistency of performance by BSI and must bear CE marking. Motor make shall be the same as mentioned in the CE certificate for the Jet Fans. Operating Fan Thrust - 28.4N , Coverage area - 400 Sq.M.

Supply, Installation, Testing & Commissioning of CO sensor (Analog).The CO level will be adjusted as per requirement. The CO level should be (Off Mode – 0 – 30 PPM, Normal Mode – 30 – 50 PPM, Fire Mode – 50 – 150 PPM )

Supply, Installation ,testing and commissioning including vaccumization and Nitrogen testing of following nominal sizes of 19 Gauge hard drawn copper refrigerant piping for DX system,complete with all necesssary fittings,with suitable adjustable ring type hanger supports,jointing/ brazing including accessories, insulated with Class-O closed cell elastometric nitrile rubber tubular sleeves sections of specified thickness as given below for Suction and Liquid lines as required : 6.4 mm dia(OD) (Soft drawn) with tube thickness 1.2mm with 19mm thick insulation

Supply, Installation ,testing and commissioning including vaccumization and Nitrogen testing of following nominal sizes of 19 Gauge hard drawn copper refrigerant piping for DX system,complete with all necesssary fittings,with suitable adjustable ring type hanger supports,jointing/ brazing including accessories, insulated with Class-O closed cell elastometric nitrile rubber tubular sleeves sections of specified thickness as given below for Suction and Liquid lines as required : 12.7 mm dia(OD) (Soft drawn) with tube thickness 1.2mm with 19mm thick insulation

Supply, Installation ,testing and commissioning of ODU stand unit for above DX unts

Supply ,Installation, Testing and Commissioning of FACTORY / SITE FABRICATED rectangular sheet metal ducts, as per specifications detailed in tender, made of Class VIII GP sheet as per SMACNA Standard for medium pressure air flow with MS angle / TDF flanges, supports, anchor fasteners, food grade gaskets and RTV sealant in accordance with the approved shop drawings. it is mandotary to use factory fabricated ducts for minimum 90% of the ducting system. Use of Site fabricated ducts should be restricted to only 'to suit' pieces.Cold rolled sheets continuous galvanized sheet steel with zinc coating as per class VIII confirming to IS:277-1962 (revised)(where ever specified) of LFQ (Lock Forming Quality) grade. Galvanizing shall be of 120gms/sq. m (Total coating on both sides) The fabrication of the ducting system for air- conditioning & Ventilation shall confirm to SMACNA-1995 standards ("HVAC Duct Construction Standards - Metal and Flexible - Second Edition - 1995"-SMACNA).Ducts of following Guage/thickness with Flanges, G.I. Sheet Metal Duct. 0 mm to 750 mm - 24 guage

Supply,installation,testing and commissionig of extruded aluminium powder coated Grilles for Supply /Return grill with volume control dampers.

Supply, installation, testing and commissioning of flexible canvass connections constructed between ductable unit / dampers / ducting of required size with fire resist flexible double canvas sleeve complete.

Supply, installation, testing and commissioning of disc valves suitable for exhausting toilet foul air ,comprising of an adjustable centre cone and coupling sleeve made of Aluminum sheet duly epoxy painted with approved color. The disc valve shall be fitted with a galvanised steel installation frame and the sleeve shall incorporate a foam-rubber gasket for airtight sealing. The centre cone should be adjustable for balancing and with a locking arrangement to maintain the desired flow rate. - Dia.150mm

Supply & installation of 100mm dia flexible duct suitable sizes duly supported at regular interval as per site requirement etc. complete as required as per specifications.

Supply,Installation, testing & commissioning of Underdeck Roof insulation with 32 mm thick Nitrile Rubber / XLPE Class "O" for fire, Fixed to the underside of the slab. The slab surface shall be thoroughly cleaned, and adhesive applied to the slab surface and the insulation material, the insulation shall be fixed at 2ft x 2ft grid of self tapping screws. The Insulation shall be temporarily Held by means of adhesive, and reinforce the insulation with GI Lacing wire.

Supply, installation, testing & commissioning of UPVC Schedule 40 Drain piping including tees, elbows etc .as per the required Diameter complete with 9mm thick Nitrile Rubber / XLPE Insulation and finished with Alu Foil. 25 mm Dia

Supply, installation, testing & commissioning of UPVC Schedule 40 Drain piping including tees, elbows etc .as per the required Diameter complete with 9mm thick Nitrile Rubber / XLPE Insulation and finished with Alu Foil. 32 mm Dia

Supply,Installation, testing & commissioning of Starter Panel for the Smoke venting fans with Star Delta / DOL starter with MPCB Push Buttons ON/OFF Trip Indication lights etc., with necessary interlocking with Fire Panel to enable automatic start in case of fire including with PLC control panel, wall mounted, with SMPS power pack 230 V AC/24 DC-3.2 A for CO sensor+ PLC, With PS/CPU/Memory module+8 channel with Digital output card,1no. 4 channel analaogue input module, , 8 channel relay card complete with programming ladder diagram + 0-50ppm alarm setting & 50-100 ppm fan actuation,field trial. (Deltacorp/Phoenix Kontact /Siemens/LnT). 1 Incoming & 8 Outgoing feeders for 2 Nos. Tube Axial Exhaust Fans ,6 Nos. Jet Fans

Supply,Installation, testing & commissioning of Starter Panel for the Smoke venting fans with Star Delta / DOL starter with MPCB Push Buttons ON/OFF Trip Indication lights etc., with necessary interlocking with Fire Panel to enable automatic start in case of fire including with PLC control panel, wall mounted, with SMPS power pack 230 V AC/24 DC-3.2 A for CO sensor+ PLC, With PS/CPU/Memory module+8 channel with Digital output card,1no. 4 channel analaogue input module, , 8 channel relay card complete with programming ladder diagram + 0-50ppm alarm setting & 50-100 ppm fan actuation,field trial. (Deltacorp/Phoenix Kontact /Siemens/LnT). 1 Incoming & 10 Outgoing feeders for 4 Nos. Tube Axial Fresh & Exhaust Fans ,6 Nos. Jet Fans

Supply,Installation, testing & commissioning of Electrical Cabling for basement ventilation fans with FRLS cables including required no. of runs , Glands and end termination, GI Earthing, where ever required. Tube Axial exhaust Fan- 31000 CFM @ 20 mm Of W.C TSP

Supply,Installation, testing & commissioning of Electrical Cabling for basement ventilation fans with FRLS cables including required no. of runs , Glands and end termination, GI Earthing, where ever required. Single Speed - Jet Fan- Thrust - 28.4N

Supply,Installation, testing & commissioning of Electrical Cabling for basement ventilation fans with FRLS cables including required no. of runs , Glands and end termination, GI Earthing, where ever required. Dual Speed - Jet Fan- Thrust - 28.4N

Supply,Installation, testing & commissioning of suitable control cable for CO sensors.

Supply,Installation, testing & commissioning of Control Cabling between DX Indoor & Outdoor Units. The Control Cable used shall be minimum Sheathed multistranded cable with PVC Conduit properly laid inside the cable tray of the refrigerant piping with proper termination.

Supply,Installation, testing & commissioning of of Power Cabling for DX Indoor Unit at Supply Point near the indoor unit. The power cable used shall be as per manufacturer recommendation with Flexible PVC Conduit and Pin Top.

Supply,Installation, testing & commissioning of of Power Cabling for Cabinet / Propeller fans. The power cable used shall be as per manufacturer recommendation with Flexible PVC Conduit and Pin Top.

The specific aim of the CFD is to find the optimal locations, number & configuration of the Jet fans required for the ventilation of the car parking lot, for the given positions of inlets and exhaust, and given configuration of the exhaust & fresh air fans, such that it meets requirements of CO exposure limit set by health and safety regulations(FOR BASEMENT)

Supply,Installation, testing & commissioning of M.S. Structural Supports with Zinc chromate coating and enamel paint for ducts.

Supply, Installation , Testing & comissioning of 14G Perforated cable tray, duly galvanised with necessary supporting members for suspension to slab / wall supporting with final finishing. All the Cable trays shall be provided with GI Cover. Perforated Type - 600 mm x 50 mm

Supply, Installation , Testing & comissioning of 14G Perforated cable tray, duly galvanised with necessary supporting members for suspension to slab / wall supporting with final finishing. All the Cable trays shall be provided with GI Cover. Perforated Type - 450 mm x 50 mm

Supply, Installation , Testing & comissioning of 14G Perforated cable tray, duly galvanised with necessary supporting members for suspension to slab / wall supporting with final finishing. All the Cable trays shall be provided with GI Cover. Perforated Type - 300 mm x 50 mm

Supply, Installation , Testing & comissioning of 14G Perforated cable tray, duly galvanised with necessary supporting members for suspension to slab / wall supporting with final finishing. All the Cable trays shall be provided with GI Cover.Perforated Type - 200 mm x 50 mm

Supply, Installation , Testing & comissioning of 14G Perforated cable tray, duly galvanised with necessary supporting members for suspension to slab / wall supporting with final finishing. All the Cable trays shall be provided with GI Cover. Perforated Type - 150 mm x 50 mm

Supply, Installation , Testing & comissioning of 14G Perforated cable tray, duly galvanised with necessary supporting members for suspension to slab / wall supporting with final finishing. All the Cable trays shall be provided with GI Cover. Perforated Type - 100 mm x 50 mm

Supply, Installation , Testing & comissioning of 14G Perforated cable tray, duly galvanised with necessary supporting members for suspension to slab / wall supporting with final finishing. All the Cable trays shall be provided with GI Cover. Perforated Type - 50 mm x 50 mm

LV WORKS

Supplying, installing, testing and commissioning of Rack Mounted, Digital (Hybrid) type expandable EPABX in multi slot chassis or modular stackable type as per the technology complete with basic capacity of 2xPRI, 8xTCO, to cater to minimum 64/ 60 nos instruments as per manufactureres standard for Digital 6 (2 Now+4 Future), 53 SLT (46 Now+7 Future) and Operator console (1 Now) * Power supply * Expansion modules of 8/16 or 30 SLT connections, connection for operator console as per the manufacturer's standard, with necessary RJ45 connectors, for connection to MDF. DTE port for connection to PC * VPN connection port on CPU for interconnection to CPUs & sharing capacity * Voice Mail facility * IVR facility\ * Flash card for BGM facility.

Supplying, installing, testing and commissioning of Junction Box, ITD/DOT approved, indoor type with wall mounting/concealed facility having front door with lock along with aluminium frame for mounting disconnection type Krone modules, complete cabinet fabricated from 18 SWG CRCA sheet with powder coating in appropriate manner and suitable for following capacity of pairs, including Krone makemodules, crimping and terminations, etc. complete as required. 10 pair Junction box

Supplying, installing, testing and commissioning of Junction Box, ITD/DOT approved, indoor type with wall mounting/concealed facility having front door with lock along with aluminium frame for mounting disconnection type Krone modules, complete cabinet fabricated from 18 SWG CRCA sheet with powder coating in appropriate manner and suitable for following capacity of pairs, including Krone makemodules, crimping and terminations, etc. complete as required. 20 pair Junction box

Supplying, installing, testing & commissioning approved type Analogue Push button telephone instrument, desk top/ wall mount with caller ID unit as per specification in approved manner. GROUND FLOOR PLAN

Supplying, installing, testing & commissioning approved type Analogue Push button telephone instrument, desk top/ wall mount with caller ID unit as per specification in approved manner. BASEMENT FLOOR

Supplying and drawing/ fixing indoor type 0.5 sq.mm FR PVC insulated copper conductor unarmoured telephone cable ITD/ DOT approved, with GI saddles on wall or in the existing surface/ recesed steel/ PVC conduit having folowing pair(s), complete as required. 2 Pair

Supplying and drawing/ fixing indoor type 0.5 sq.mm FR PVC insulated copper conductor unarmoured telephone cable ITD/ DOT approved, with GI saddles on wall or in the existing surface/ recesed steel/ PVC conduit having folowing pair(s), complete as required. 10 pair

Supplying and drawing/ fixing indoor type 0.5 sq.mm FR PVC insulated copper conductor unarmoured telephone cable ITD/ DOT approved, with GI saddles on wall or in the existing surface/ recesed steel/ PVC conduit having folowing pair(s), complete as required. 20 pair

Supplying, installation and testing of suitable size modular GI box, modular plate and cover complete with RJ-11 connector (modular telephone socket) including concealed metal box/ surface GI/ PVC Box, modular plate, punching, identifying, complete as required. CAT-B

Supplying and laying (including excavation) 50 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/ road surface, to required depth complete.

Supplying, installing, testing and commissioning of AI Dual-Band Smart Router, Wi-Fi 6, 4 Gigabit Ports, 4 External Antennae, Voice Control, Parental Control (1500 megabits_ per_Second) wireless Router with 4 nos 10/100 LAN ports, 1no 10/100 WAN port, 1 no. SIM slot, USB 2.0 port, standard 802.11 ac/n/g/b, NAT/ SPI / Website filter / MAC address filter, connection provided by GBBN.

Supplying, Installing, Testing, commissioning of FULLY MANAGED & loaded Layer 3, 24 P, 10/100/1000, Non PoE switch, 92Gbps/ 68.45Mpps, with Min. 24 access ports, with device management licensed software, 2Gb + 2xCombo uplink ports with key Features of Performance, Management, Security, Multicating, VLAN etc.

Supplying, Installing, Testing, commissioning of FULLY MANAGED & loaded Layer 2, 24 P, 10/100 Non PoE switch, 17.6Gbps /13.1 Mpps, with Min. 24 access ports, with device management licensed software, 2Gb + 2xCombo uplink ports with key Features of Performance, Management, Security, Multicating, VLAN etc.

Supplying, Installing, Testing, commissioning of 24 port Patch Panel with toolless keystone jacks in provided U Rack complete. (For CCTV & DATA)

Supplying, installation and testing of suitable size modular GI box, modular plate and cover complete with RJ-45 connector (modular LAN socket TX1000/ CAT6) including concealed metal box/ surface GI/ PVC Box, modular plate, punching, identifying, complete as required. Modular GI box

Supplying and drawing of Cat - 6 UTP, 4 pair annealed tinned copper conductor PVC insulated, PVC sheathed, unarmoured data cable in existing surface/ recessed steel/ PVC conduit of appropriate size including connection, etc. complete as required. (For DATA & CCTV). CAT6 cable

Supplying, Installing, Testing, commissioning of 1 meter length, UTP Patch cord of Cat 6 type in position.

Supplying, Installation, Testing, commissioning of 3 meter length, UTP Patch cord of Cat 6 type in position.

Supplying, installing & testing UTP Connector (RJ-45). GROUND FLOOR PLAN

Supplying, installing & testing UTP Connector (RJ-45). BASEMENT FLOOR

Supplying, installing, testing & commissioning of 2 MP Full HD WDR IR Day & Night Indoor Fixed Bullet Network Camera, 20M IR distance, focal length 3.6mm, IP66, 10/ 100 Base T LAN, ONVIF, PoE (IEEE 802.3 af compliant), Motion based recording, 1/2.9" CMOS sensor, 0.2 min. lux for colour & 0.0 Lux for monochrome, 16:9 aspect, 1920x1080 , 25/30 FPS, H.264 video compression with features of Contrast/ Sharpness/ White Balance/ WDR/ Privacy masking, power supply, Wall/ false ceiling mounting with all necessary acceseries with licensed software. GROUND FLOOR PLAN

Supplying, Installing, Testing & commissioning of 2 MP Full HD Day & Night Varifocal Outdoor Bullet Network Camera, 25M IR distance, IP66, 10/ 100 Base T LAN, ONVIF, PoE (IEEE 802.3 af compliant), Motion based recording, 1/2.9" CMOS sensor, 0.05 min. lux for colour & 0.0 Lux for monochrome, 16:9 aspect, 1920x1080 , 25 / 30 FPS, H.264 video compression, verifocal lens 2.8mm-12mm (focal length to suit location)with of Contrast/ Sharpness/ White Balance/ WDR/ Privacy masking, Wall/ pole mounting with all necessary acceseries with licensed software. BASEMENT FLOOR

Supplying, Installing, Testing & Commissioning of 32 Channel Professional Network Video Recorder (NVR), support 8MP, rack mount for recording / playback / continuous / scheduled / event & motion trigger / Search / picture control, H.265, complete with all accessories & license 16 channel ONVIF, LAN 10/100/1000 connected, 100% recording for 30 days @ 1920x1080 resolution @ minimum 15 fps & Play back @16 CIF 4x4, provision for min. 12TB internal storage capacity, ports for RJ45, HDMI, VGA, DVI, Serial, USB, KVM complete with VMS server software for Client & operator control.

Supplying, Installing, Testing and commissioning of internal 4TB SATA HDD for NVR storage

Supply, Installation, Testing, commissioning of Layer 2, fully Managed & loaded LAN 10/ 100, 24+2 RJ45 gB +2 Combo PoE switch having 12.8 gbps bandwidth 9.5 Mpps, 1U rack mount with accessories with all L2 features of Multicasting,VLAN etc(Mounted in common data switch racks)

Supply, Installation, Testing, commissioning of Layer 2, fully Managed & loaded LAN 10/ 100, 8+2 RJ45 gB +2 Combo PoE switch having 12.8 gbps bandwidth 9.5 Mpps, 1U rack mount with accessories with all L2 features of Multicasting,VLAN etc(Mounted in common data switch racks)

Supplying of Wall bracket mounted 40” screen size Professional LED TV Screen connected to workstation, 1920x1280 Full HD,16:9 aspect ratio, 350 nits, 5000:1 contrast, 178 H/V, Ports-2xHDMI, USB, Analog audio / video, RF, RS232C In/ Out, Narrow Bezel, 2*5W speakers, stereo input / output with remote with batteries.

Supplying, Installing, Testing & Commissioning of 20 Watt Music & speech Speaker wall/cloumn mounted (tapping at 10 W & 15 W)with decorative aesthetic grill, 200 mm dia. speaker, 100V line matching transformer, 98 dB/1M, wide opening angle, with mounting clamps, with 1 Sqmm speaker cable in zone with 1000 W per zone up to 700 M zone wiring.

Supplying, drawing, connecting, testing and commissioning of 16 AWG, 2Cx1.5 Sqmm cable, 13.5ohm / km at 20 Deg C, for 4 ohm speaker power loss of 11% - 18M, 21% -38M, 50%-143M, bare electrolytic copper conductor, FR PVC compound insulated, in Gray colour. (For PA & AV system)

Supplying and fixing 15U Wall Mount loaded Rack of steel framed welded/ CKD, vented top cover with fan mounting provision, powder coated, cable entry/ exit cutouts and lockable toughened glass front door as per specification in approved manner.

Supplying and laying (including excavation of suitable width & depth up to 90 cm) 75 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete.

Supply, installation, testing and commissioning of Automatic DC DRIVE High Speed Boom Barrier 6 meter aluminium Boom with Resting stand attached, Opening closing time 1-2 sec. Power Supply 230 V, IP55 Ingress Protection rate. Operating Temp,24V DC Operating Voltage with 2hours power Backup with 2 remote quantity,SMPS 12V 2.5A for RADAR Sensor.

Supplying and Installing following size perforated type 16 SWG, M.S.cable tray of GI pregalvanised/hot dip galvanised/ powder coated finish, in convenient sections, joined with connectors, suspended from the ceiling with suitable MS suspenders including bolts and nuts, painting suspenders etc, complete as required. 100mm width x 50mm depth

Supplying, installing, testing and commissioning of Hot deeped Galvanised perforated tray cover suitable for perforated type Cable tray manufactured from 18 swg (1.2 mm thick) GI sheet of complete with necessary hardware in approved manner. 100mm width x 50mm height

Supply, installation, testing and commissioning of 12 Core SM Opticle fibre Cable

OPERATIONAL & MAINTENANCE WORKS

Operational & Maintenace work for 5 years including manpower machine tools & tackles which includes complete maintenace of the subject work after due completion with all respects & completion certification by GTDC. The O&M includes total maintenance of the property for a term of 5 Years & Contractor has to submit his O&M cost in the form of RA bills (Monthly). Machine to be used Single disk ruuber, High pressure Jet, Wet & Dry vaccume, Manual flipper, Bringer trolleys, Mops, glass kits & telescophic poles etc od suggestive brands only. The basic scope includes external cleaning, Internal cleaning Landscape maintenance chemical cleanings(for bathrroms, office rooms, laminated furniture, office items, PC, granite floor, wood polish, room freshing, cleaning of WC & Urinals, cleaning of Kotaha, Vynil, mosaic tiles, polish, marble floor etc. Basic maintenane & warranty checks AC , electrical fixtures of STP , WTP, UGWT, DG Set, Fire pumps, water pumps.(Additional cost for parts & replacement of fixtures will be beared by Client). The contactor should assure proper manpower & technical staff on board & a manpower chart should be provided with names & designation. All manpower provided should be having verification cards. All Staff present in the premises should be in Uniform. All Staff should be Trained on Grooming, Cleaning Methods, Machine & Equipment Handling and Safety. The turn around time required for getting the machine up would be 48 hours for all minor break downs, for major break downs it will be in one week. Management should manage the team and ensure no Tardiness in approach. Checklists should be shown to representative appointed by GTDC Ltd, Goa Office, who will inspect the area cleaned and acknowledge with signature.