Improvement works to 3 Bay garage shed with steel ladder provisions at Kovilpatti Division office premises.

Amount

Dismantling the existing damaged brick masonry for the required height and disposing the debris away from the site including cost of labours, lead, lift, tools & plants, etc. complete.

Earth work excavating and depositing on bank with an initial lead of 10m and initial lift of 2m in hard stiff clay, stiff black cotton, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders including cost of all labours, lead, lift, T & P., etc. complete.

Clean removal of cement plaster from ceilings / walls and clearing away the debrises from the site as directed by the engineer at site including scaffolding charges, cost of labours, lead, lift, T & P., etc. complete.

Dismantling the existing damaged one course of pressed tiles in cement mortar & clearing away from the site as directed by the engineer at site including cost of labours, lead, lift, T & P., etc. complete.

Brick work in CM 1:5 using fly ash bricks including plasticiser at the rate of 100 ml per bag of cement, all other materials, labours, lead, lift, curing, etc. complete.

Supplying & providing TMT rods including cutting, bending, tying & fixing in position as per specification including binding wires, cost of all other materials, labours, lead, lift, etc. complete.

Providing RCC 1:1.5:3 using 12 to 20mm machine crushed HBG metal including plasticiser at the rate of 100 ml per bag of cement, form work, all other materials, labours, lead, lift, curing, etc. complete - excluding cost of reinforcement.

Supplying and fixing in position of single leaf steel door using MS angle of outer frame 40 x 40 x 6 mm and 35 x 35 x 6 mm for shutter frame, 32 x 6 MS Flat for centre pieces (two horizontals & one vertical) and 16 G MS Sheet with lock including cost of all materials, lead, lift, labour, etc. complete.

Supplying and fixing in position of steel ventilator using MS angle 35x35x6mm, flats if required, plain round (4 Nos.) and square rods (for glass holding) 10mm thick & pin headed glass including iron wire mesh net, cost of all materials, labour, lead, lift, etc. complete.

Fixing in position of available wooden ventilators with new iron wire mesh net including cost of all materials, labour, lead, lift, etc. complete.

Supplying, fabricating and placing in position of structural steel materials like MS angles, flats, rods, etc. for sunshade sheet angles and steel ladders including cost of all materials, labours, lead, lift, etc. complete as directed by the Engineer at site.

Sunshade roofing with PPGL sheets, approved make 0.45mm thick with necessary fixtures like U or J bolts, nuts, adjustable ridges, bitumen washer including cost of all materials, labours, lead, lift, scaffolding charges, etc. complete.

Providing PCC 1:3:6 for foundation with 20 mm size machine crushed HBG metal including plasticiser at the rate of 100 ml per bag of cement, all other materials, labours, lead, lift, curing, etc. complete.

Special ceiling plastering with C.M.1:3 (6 mm baby jelly may be used in deep peeled off portions), 12 mm thick after one coat of Nitozinc primer in the exposed rods including plasticiser at the rate of 100 ml per bag of cement, cost of all other materials, labours, lead, lift, curing, scaffolding, etc. complete.

Plastering in walls with C.M 1:5, 12 mm thick including plasticiser at the rate of 100 ml per bag of cement, all other materials, labours, lead, lift, curing, etc. complete.

Terrace flooring of one course of pressed tiles 230 x 230 x 20mm over CM 1:3, 20mm thk. including plasticiser at the rate of 100 ml per bag of cement & mixed with crude oil 10% by weight of cement and pointing with the same cement mortar 1:3 mixed with water proofing compound at 2% by wt. of cement (@ 1 kg / bag of cement) & plasticiser with required slope over RCC roof slab including cost of all materials, labours, lead, lift, crude oil, curing, etc. complete.

Terrace tiles pointing in C.M 1:3 to full depth of tiles including water proofing compound at 2% by wt. of cement (@ 1 kg / bag of cement) & plasticiser at the rate of 100 ml per bag of cement, cost of all other materials, labours, lead, lift, curing, etc. complete.

White washing two coats with shell lime and fevicol for ceiling & walls including cost of all other materials, labours, lead, lift, scaffolding, etc. complete.

Colour washing two coats for outer walls with shell lime, colouring pigments & DDL fevicol binder at the rate of 250 gm. per 10 kg bag of lime including cost of all materials, labours, lead, lift, scaffolding, etc. complete.

Painting two coats of enamel painting of approved colour and quality over one coat of red oxide primer in new steel works including cost of all materials, lead, lift, labour, etc. complete.

Providing 110 mm dia ( 4kg / cm2 ) PVC approval quality and best variety (Finolex or equivalent) pipe including specials, T.W plugs, clamps, screws, labours, lead, lift, etc. complete for rainwater downfall pipe.

Supplying, jointing and fixing in position of 50 mm dia PVC water pipes ( ISI make ) 10 Kg / cm2 including PVC specials, cost of other materials, lead, lift, labour charges, etc. complete as directed by the Engineer at site.

Wiring with 2 x 1.5 sq.mm (22/0.3) PVC insulated single core unsheathed copper conductor cable of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with TW switch box inflush with wall with 5A F.T. switch covered with hylem sheet of 3mm thk. with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for open PVC light point / fan point (For electronic regulator).