Loading…
Loading…
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹19.5 Laccepted-finance | accepted-finance |
Tender Value
₹18.6 L
EMD Value
₹25,000
Closing Date
23 Mar 2026, 11:00 pmClosed
Minor Irrigation Department
Shilpa K
Repairs to Hagarikyadagihalli LIS in H.B Halli Taluk Vijaynagara District for the year 2025-26 (Reserve for CAT-II (A) Only)
MI/2025-26/IW/WORK_INDENT11236
MI/2025-26/IW/WORK_INDENT11236
Reserved
Irrigation and Other Works
Two Tender Document System(Two Cover)
Minor Irrigation Division Bellary
6 documents required · 6 mandatory
Satisfactorily completed at least 90percent of contract value in the last five years i.e.2020-21 to 2024-25 as a prime contractor,at least one Similar work such as any Construction work value not less than Rs.4.64 lakhs. The weightage of 10percent will be given per year to bring them to the price level of the FY 2025-26.
Section 3, Qualification Information
Achieved in at least ONE financial years during the last five years i.e. 2020-21 to 2024-25 a minimum financial turnover in all classes of civil engineering construction works only of Rs.1855505.36 Financial turn over of previous years will be given a weightage of 10percentage per year to bring to them to the price level of the FY 2025-26.
Liquid assets and or availability of credit facilities of not less than Rs.5.57 Lakhs Credit lines or letter of credit or certificates from banks for meeting the fund requirement etc
Contractor Registration certificate, Class 3 and Above, PWD Registration (CAT-IIA)
Bidders shall ensure upload of relevant document certifying his/her status as CAT-IIA as prescribed in the tender document.
The bidders are instructed to visit the site before submitting the bid and copy of the site visit certificate has to be obtained by the concerned AEE and the same has to be uploaded in KPPP portal,if not uploaded the tenderer shall be disqualified.
₹500
₹25,000
23 Mar 2026
13 Mar 2026
25 Mar 2026
20 Mar 2026
Repairs to Hagarikyadagihalli LIS in H.B Halli Taluk Vijaynagara District for the year 2025-26 (Reserve for CAT-II (A) Only)
Cutting and removing jauliflora bushes above 1.50 m upto 3.00 m girth excluding removal of stumps and including burning or disposing off the materials as directed with all other ancillary ope...
Excavation and removal of silt and silt mixed with sand from canal bed by manual means including disposing off the same in spoil bank or on the canal embankment in layers as directed with all ...
Design, manufacturing, supply, errection, trail running, performance test and commissioning of centrifugal pump of approved make conforming to IS:12699 (1989) (Reaffirmed 2009) having specified pump o...
Providing and fixing of ductile iron double flanged swing check valves with slanted seat or with lever weight with straight disc, with metallic corrosion proof and wear resistant seat faces with nicke...
Design, fabrication, supply, erection and commissioning of vent liner using 20 mm thick plates with stiffeners and anchors for river sluice / canal sluice vents including cost of all material...
11 kV HT Metering cubicle of different CT Ratio, Both side cable entry type with 3 CT & 3 PT, With Transparent Cover TTB, with 30x8 mm Copper Busbar, Modem & 2 No of Meters for 3 Phase 4 Wire Meterin...
Manufacturing, supplying, laying in position, aligning, jointing, testing and commissioning of electric resistance welded / submerged arc welded mild steel ( Fe-410 grade ) raising main pipe of specif...
Work of overhauling and servicing upto 1250KW, 6.6KV, motor as specified below: a. Disconnect the HT/LT, Cable and record motor details take out the motor from bed b. Check alignment and record de...
Removing & refixing the pump after repairing of existing horizontal mounting/ monoblock pump with following spares, etc. including aligning of pump with reference to motor & running the pump on load ...
Work of replacement of faulty control components and modification and rewiring of soft starter panel upto 1250KW/6.6KV motor as specified below: a. Disconnecting the power cables and control cables....
Supply and brazing of motor end lead cable by using H.T Copper lugs, brazing materials, gas, soldering past, etc as original for all the three phases for motor etc.., complete with all lead and lifts ...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, cautio...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS C...
Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nomina...
Providing Coursed rubble masonry (second sort) with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) etc.., complete with all lead and lifts including loading and un...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS C...
Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, inclu...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
KW-2 HK Halli 11236 CatIIA.doc
Tender Document • 24.11 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .