SHORT TERM TENDER FOR SUPPLY AND FIXING OF ROAD STUD / CATs EYES, ROAD MARKING, PAINTING OF DIVIDER AND REMAINING BITUMINOUS WORK OF OUTER CIRCULAR ROAD FROM ENTRANCE OF CANTONMENT TOWARD BARADARI CHOWK TO HURAWALI TIRAHA IN MORAR CANTT.

Amount

SHORT TERM TENDER FOR SUPPLY AND FIXING OF ROAD STUD / CAT’s EYES, ROAD MARKING, PAINTING OF DIVIDER AND REMAINING BITUMINOUS WORK OF OUTER CIRCULAR ROAD FROM ENTRANCE OF CANTONMENT TOWARD BARADARI CHOWK TO HURAWALI TIRAHA IN MORAR CANTT.

Prime coat Providing and applying primer coat with bitumen emulsion on prepared surface of granular Base including cleaning of road surface and spraying primer at the rate of 0.75 kg/sqm using mechanical means as per clause 502 of specifications.

Dense Graded Bituminous Macadam Providing and laying dense bituminous macadam using crushed aggregates of specified grading, premixed with bituminous binder @ 4.0 to 4.5% by weight of total mix of mix and filler, transporting the hot mix to work site, laying with a Electronic Sensor paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per clause 505 of specification complete in all respects. Using Batch Mix Plant of appropriate capacity for Grading II(19 mm nominal size) Bitumen Content minimum 4.5% with bitumen 60/70 (VG 30)

Bituminous Concrete Providing and laying bituminous concrete using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4 to 5.6 % by weight of total mix of mix and filler, transporting the hot mix to work site, laying with a Electronic Sensor paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per clause 507 of specification. Using Batch Mix Plant of appropriate capacity for Grading I ( 50 mm thickness ) Bitumen Content minimum 5.4%with CRMB-60

Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beeds on Bituminous surface. Providing and applying (Cleaning of Bituminous surface) thermoplastic compound having composition of binder (Regin) minimum 18 %, titanium dioxide minimum 10 % and intermixed glass beed, minimum 30% of brand like Asian, Burger or equivalent make of 2.5 mm thick including drop down reflectorizing, glass beeds @ 250 gms per sqm area thickness of 2.5 mm is exclusive of surface applied glass beeds as per IRC:35.The finished surface to be level, uniform and free from streaks and holes, all complete as per clause 803 of specifications. Note:- The guarantee of Thermoplastic should be minimum 3 Years

Road Markers/Road Stud with Lense Reflector Providing and fixing single mound twin shanked molded Road Markers/Road Stud made of poly carbonate or ABS body and shall support a load of 13635 Kg tested in accordance to ASTM D 4280 and complying lo specifications of Section-5 of IRC:35-2015 and clause 804.2.2 of MORT&H and Section-5 of IRC:35-2015. he reflecting panels shall consist of number of lenses containing single or dual prismatic cubes capable of providing total internal reflection of the light entering the lens face. The slope or retro-reflecting surface should be 35 + 5 degree to base. The reflective marker shall be fixed to the road surface using the epoxy/ adhesives and the procedure recommended by the manufacturer. No nails shall be used to affix the markers so Cubes capable of that they do not pose safety hazard on the road.. The contractor shall submit a two year replacement warranty. for satisfactory field performance including stipulated retro-reflectance of the reflecting panel.

Putty 3mm thick cement wall care putty on wall (JK OR BIRLA Make)

Painting Two Coats on New Concrete Surfaces Painting Two Coats on New Concrete Surfaces Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surface