Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹37.2 LAccepted-AOC | ₹37.2 L Quoted ₹40.1 L | L1 | Accepted-AOC ACCEPTED BEING LOWEST AS PER NIT |
| 2 | L2₹40.2 LRejected-Finance | ₹40.2 L | L2 | Rejected-Finance Rejected being L2 bidder |
| 3 | L3₹44.4 LRejected-Finance | ₹44.4 L | L3 | Rejected-Finance Rejected being L3 bidder |
| 4 | L4₹45.0 LRejected-Finance | ₹45.0 L | L4 | Rejected-Finance Rejected being L4 bidder |
| 5 | L5₹46.0 LRejected-Finance 15 BAGHE ISLAM NEAR NH BY PASS BRIDGE LAL NAGAR CHANAPORA SRINAGAR JAMMU KASHMIR 190015 | SRINAGAR | JAMMU AND KASHMIR | 190015 | ₹46.0 L | L5 | Rejected-Finance Rejected being L5 bidder |
Updated dates
Tender Value
₹56 L
EMD Value
₹1.1 L
Closing Date
17 Nov 2025, 6:00 pmClosed
HQ 133 WORKS ENGRS
HQ 133 WORKS ENGRS, C/O 56 APO, PIN- 914133
SPL REPAIR TO BLDG NO T-43, P-104, T-105 AND T-126 IN THE AOR OF AGE B/R-I UNDER GE 969 EWS (JOB NO. W/SPL REPAIR-15/NAUGAM/2025-26)
2025_MES_734990_1
CWEK/TOKEN-87/969 EWS/2025-26
Open Tender
Civil Works
180 days
GE 969 EWS
Class C and above and category a i
7 documents required · 7 mandatory
₹1,000
GE 969 EWS
₹1.1 L
HQ 133 WORKS ENGRS
2 Feb 2026
14 Oct 2025
25 Nov 2025
14 Oct 2025
17 Nov 2025
4 Nov 2025
14 Oct 2025 - 18 Oct 2025
21 Oct 2025
Amount
Dismantling of plain or corrugated steel sheeting, any gauge and thickness in roof covering including Nainital or similar pattern roof covering complete all as specified.
S&F pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 MPa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
S&F 0.63 mm thick, galvanized, corrugated mild steel sheeting with two corrugation side lap, fixed with coach screws and washers, in roofs, walls etc with grade of zinc coating 275 grams per square metre complete all as specified.
M&L preparation of new zinc (or galvanized) surfaces to receive painting by coating with mordant solution including washing and cleaning etc. of any description, over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chromate primer complete all as specified.
Demolition of brick work, PCC block masonry, stone masonry or boulder masonry built in cement mortar complete all as specified and directed.
M&L for brick work with sub class 'B' bricks (old sizes) straight or curved on plan exceeding 6 mtr mean radius built in CM 1:6 .complete all as specified and directed.
M&L for walling of random rubble masonry uncoursed, well bonded , bedded and solidly hearted built in CM 1:4 complete all as specified.
M&L for extra over walling hammer dressing with mix depositing on face from straight edge held against the dressed surface n. exc 40mm depression granite or trap stone complete all as specified
M&L for cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate) as in coping including form work complete all as specified.
M&L for rendering 15 mm thick on stone masonry surfaces or surface other than fair face of brickwork or on one side of lathing in CM 1:4 finished even and smooth (without using extra cement) complete all as specified and directed.
M&L for rendering 15 mm thick on stone masonry surfaces or surface other than fair face of brickwork or on one side of lathing in CM 1:6 finished even and smooth (without using extra cement) complete all as specified and directed.
Taking down cement plaster or screed bed of any description from concrete slab/terrace surfaces etc including racking out joints hacking for key, scrubbing down with water etc. complete all as specified and directed.
M&L for rendering 15 mm thick on brick work or concrete surface in CM 1:6 and finished even and smooth without using extra cement complete all as specified and directed.
M&L for rendering 15 mm thick plastering on brick work or concrete surface in CM 1:4 finished even and smooth without using extra cement complete all as specified and directed.
Dismantling timber scantling 40 sq cm and over in section in any position as in unframed work, complete all as specified and directed.
M&L 2nd class soft wood as in scantling, clean swan timber framed and fixed, complete all as specified and directed.
All as per ser Item No 17 here-in-before but except timber.
Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) and boarding any thickness, including cover fillets complete all as specified and directed.
M&L for 6 mm thick veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one face has decorative veneer fixed with nails to timber frame work on ceiling etc. complete all as specified and directed.
M&L for 6 mm thick veneered decorative Ply wood, grade 1 (with BWR resin) with decorative face veneers on one face has decorative veneer fixed with nails to timber frame work in partition, wall panelling etc. complete all as specified and directed.
M&L for 9 mm thick plywood, grade BWR, type BB, fixed with screws to timber frame work in partition complete all as specified and directed.
Dismantling timber scantling in fillets rails, posts purlins etc under 40 Sqcm in section in framed work complete all as specified and directed.
S&F second class soft wood plain fillets square, rectangular or triangular in section, wrought secured with screws, cross sectional area exceeding 13 and not exceeding 25 Sq. cm complete all as specified and directed.
S&F second class soft wood plain fillets square, rectangular or triangular in section, wrought secured with nails, cross sectional area not exceeding 3 Sq. cm complete all as specified and directed.
S&F 2nd class soft wood 20 mm thick in facia/eaves boarding fixed with nails in any situation planed one side with butt joints complete all as specified and directed.
S&F 2nd class softwood weather boarding clean swan, plain 20mm thick or feather edges 15mm to 20 mm thick and fixed with 30mm over laps, complete all as specified & directed.
All as per Ser item No 27 here-in-before but except boarding.
M&L sheet glass ordinary quality 4.00 mm thick and glazing with oil putty in square n exc 0.50 sqm in each panes fixed to steel or wooden doors and windows frames. complete all as specified and directed.
S&F in repairs galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.
Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified.
Demolition cement concrete (unreinforced) in ground floors and paving n exc 15 cm thick (below or above ground level) complete all as specified and directed.
M&L 75 mm thick cement concrete 1:4:8, type D-2 (using 40mm graded using stone aggregate) as in flooring complete all as specified and directed.
M&L 40 mm thick cement concrete 1:2:4, type B-1 (using 20mm graded stone aggregate) as in flooring complete all as specified and directed.
M&L for machine cut Kota stone slab flooring 18-20mm thick over and including 20mm thick screed bed in CM 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing as in floors / cills etc, and moulding at edges if required complete all as specified and directed.
M&L for non skid coloured ceramic tile 8 to 10 mm thick (square /rectangular /in joint less) exceeding 0.11 sqm but not exceeding 0.18 sqm, in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 15 mm thick screed bed in CM 1:4 complete all as specified and directed.
M&L for glazed ceramic tiles in vertical surface 350mm x 250mm/450mmx350mm and 7mm thick colour and design (as approved) and jointed in neat cement slurry and pointed in whiter or colour cement to match the colour of tiles over and including 15 mm thick cement plaster using CM 1:4 complete all as specified and directed.
M&L for vitrified ceramic tiles 10 mm thick light shade (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm in floors dado etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM 1:4 complete all as specified and directed.
M&L machine pressed rubber moulded coloured precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment complete all as specified and directed.
M&L sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.
M&L for providing cement concrete 1:3:6 type C1 (using 20mm graded stone aggregate) in lintel upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in roof, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as in 75mm thick plinth protection complete all as specified and directed.
M&L for 75 mm thick PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in plinth protection finished even and smooth without using extra cement complete all as specified and directed.
Taking down chowkhats or frame with shutter (without taking out shutter from the frame) not exceeding 1.50 sqm each and removal from site all as specified and directed
S&F 2nd class soft wood plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid rounded or chamfered put together with glue pinned at joints all as specified and directed.
S&F factory made 2nd class 30 mm thick soft wood (Kail) 30mm thick glazed skeleton shutters open rebated and prepared to receive gauge etc (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc and fitted to chowkhats size of members of shutters as specified in SSR Part - I section 8 Clause 8.23 (b) for windows, ventilators etc are provided with stiles and rails, complete all as specified.
S&F MS cold rolled butt hinges medium weight 75 mm long complete all as specified.
S&F Aluminium anodised barrel tower bolts, 75 mm long complete all as specified and directed.
S&F Aluminium anodised handles, cast type anodised 125 mm long complete all as specified and directed.
Taking down chowkhats or frame exc 1.5 Sqm but n.exc 4 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed.
S&F factory made plain, framed, panelled shutters 35 mm thick of 2nd class softwood, (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers complete all as specified and directed.
S&F factory made PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplied and fitted in openings as per specification and drawing sown in SSR Part II, complete all as specified.
S&F factory made solid PVC moulded door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side & and as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete all as shown in drawing of relevant item in MES, schedule Part II, 2010 as specified.
S&F MS butt hinges 100 mm long medium weight, cold rolled mild steel complete all as specified and directed.
S&F butt hinges 100mm long extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and directed.
S&F Aluminium anodised, barrel tower bolts 150 mm long of extruded section and fixed complete all as specified and directed.
S&F Aluminium handles 150 mm long , cast type, anodised complete all as specified and directed.
S&F Aluminium alloy, anodised, sliding door bolt 200 mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections with fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.
S&F framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to e.290.Gde-E-165 including screwing and welding to existing wooden/steel windows complete all as specified and directed.
S&F in repairs vitreous china squatting pan, ‘Orissa’ pattern, size 630mm x 450 mm white, with integral foot rests (excluding flushing cistern) including flush pipe 60 cm long complete all as specified and directed.
S&F in repairs PVC flushing cistern, 10 ltrs capacity, low level including brackets, inlet and outlet PVC pipe and fittings complete all as specified and directed.
S&F in repairs for 15 mm bore bib taps, fancy type chromium plated with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule complete all as specified and directed.
S&F in repair stop/angle valves 15 mm, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle fancy type, screwed both ends for iron pipe or for unions and fixed, chromium plated complete all as specified and directed.
S&F PVC connection pipe 15 mm size with PTMT nuts of length 600mm fixed to GI tubing complete all as specified and directed.
S&F in repair brass chromium plated tubular towel rail 20 mm dia D type, 60 mm long between flanges complete all as specified and directed.
Taking down or up 15mm bore GI tubing including cleaning for refixing or removal to store etc. complete all as specified and directed.
Taking down or up 20mm bore GI tubing including cleaning for refixing or removal to store etc. complete all as specified and directed.
S&F 15mm bore medium graded GI tubing with all fittings and fixed to wall and ceiling or laid in trenches complete all as specified and directed.
S&F 20mm bore medium graded GI tubing with all fittings and fixed to wall and ceiling or laid in trenches complete all as specified and directed.
M&L cutting chases pinning in brick masonry and making good to facing where required and pointing in cement and making good in CM 1:3 cutting n.exc. 10 cm in girth complete all as specified and directed.
S&F 1000 litres capacity rotational moulded, triple layer polythene water storage tanks (cylindrical vertical with closed top) hoisting and fixed in position on roofs etc, including tank nipples, fittings, including dismantling of existing water tank any type complete all as specified.
S&F in repairs 20 mm ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (Minimum weight 20mm - 210 gms) etc complete all as specified and directed.
S&F in renewal of 20mm bore gun metal gate valves, with iron wheel head, screwed both ends suitable for iron pipe complete all as specified.
S&F in repair CP soap tray fixed to walls with rubber plugs complete all as specified and directed.
S&F 125mm dia CP grating doom with/without waste hole (Minimum weight 40 gms) complete all as specified and directed.
Taking down pipe and eaves gutters (any size and pattern) including all fittings heads shoes bends swan necks etc. complete all as specified and directed.
S&F 110 mm bore PVC (SWR) pipes single socket in any length with rubber ring joint laid in trenches or in floors etc complete all as specified and directed.
S&F 75 mm bore PVC (SWR) pipes single socket in any length with rubber ring joint fixed to walls etc complete all as specified and directed.
S&F 110 mm bore PVC (SWR) Bends with access door etc. complete all as specified and directed.
S&F 75 mm bore PVC (SWR) Bends with access door etc. complete all as specified and directed.
S&F 110 mm bore PVC (SWR) junction single (single T) equal of unequal complete all as specified and directed.
S&F 75 mm bore PVC (SWR) junction single (single T) equal of unequal complete all as specified and directed.
S&F 125/110 mm PVC (SWR) trap setting and jointed with solvent cement complete all as specified and directed.
S&F 75 mm PVC (SWR) floor trap setting and jointed with solvent cement complete all as specified and directed.
Demolition by breaking up drain pipes (salt glazed stoneware or AC/RCC) 150 mm dia jointed in cement mortar and taking out of trenches and removing the debris including concrete bed and haunching from the trenches all as specified and directed.
M&L for concrete bed to drain pipes in PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) including packing under haunching against the sides of pipe after they are laid and tested for 150mm dia complete all as specified and directed.
M&L for cutting in to existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for as specified dia of pipe 150mm complete all as specified and directed.
S&F reinforced concrete pipes, of bore in 150 mm class NP2, laid & jointed complete with collars laid in trenches in concrete padding jointed in cement mortar 1:1 all as specified and directed.
Demolition of reinforced cement concrete of any description and in any position (reinforcement cut as required to facilitate demolition) complete all as specified and directed.
M&L providing, precast cement concrete 1:2:4, type B1 (using 20 mm graded stone aggregate) as in manholes cover slab, etc. (of any section indicated), with plain fair faces, including chamfers weathering's, throating etc. and setting in mortar complete with joints to match complete all as specified and directed.
M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
S&F roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats of Fe 410-W (Gde-E- 250) quality etc. complete all as specified and directed by Engineer-in-Charge.
S&F rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides of Fe 410-W (Gde-E- 250) quality etc. complete all as specified and directed by Engineer-in-Charge.
S&F mild steel plates (plain or chequered) 5mm thick cut or notched (ordinary and counter sunk) forming holes, without any attachment, of Fe 410-W (Gde-E- 250) quality complete all as specified and directed by Engineer-in-Charge.
M&L curtain rod 25 mm, anodised aluminium alloy with bracket, end bulbs, fancy type, fixed in position complete all as specified and directed by Engr-in-Charge.
M&L Makrana white Marble tiles 30cmx20cmx20mm thick machine cut, bedded jointed and pointed with grey cement slurry including cutting and polishing fixed in walls complete all as specified and directed by Engineer-in-Charge.
M&L preparation of newly plastered surfaces and applying two coats of oil bound distemper, over a coat of primer including chalk whitening on new plastered surfaces of walls complete all as specified and directed.
M&L complete removal of existing treatment on surfaces of wall by brooming down or steel wire brushing, scrapping down smoke soot , moulds moss and efflorescent salts , trading oil and greasy spots and applying two coats of oil bound distemper, over a coat of primer including chalk whitening on plastered surfaces of walls preparatory to distempering complete all as specified and directed.
M&L for preparation of new steel surfaces, not otherwise described over 10cm width or girth applying two coat of synthetic enamel paint over a coat or red oxide primer complete all as specified and directed.
M&L for preparation of old painted surface of wood and wood based surface any description not otherwise described over 10cm width or girth including knotting and stopping and all preparation work required and applying one coat of synthetic enamel paint all as specified.
M&L for preparation of New or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of Pink primer complete all as specified.
Taking down carefully any type point wiring (light, fan, socket or power) complete including conduits/casing- capping with fittings such as light fittings, sockets, switches ceiling roses, board outlets etc and removing the materials/ debris and making good the disturbed surfaces of walls, floor etc to match with the existing surface complete all as specified and directed.
M&L point wiring complete with FRLS 1100 Volts grade, 1.5 Sqmm PVC insulated and unsheathed copper conductor single core cable drawn through and including 25 mm medium grade ISI marked PVC casing capping with all accessories such as bends, elbow, reducers , junction boxes /MS boxes 1.6 mm thick duly painted /PVC box factory made rectangular in shape as required with top cover 3 mm thick plastic laminated sheets of required size, fixed with screws, for housing switches, sockets, regulators etc, including 1.5 sqmm PVC insulated and unsheathed FRLS copper conductor cable as earth continuity wire connected to common earth dolly for one light and fan point controlled by one switch complete all as specified and directed.
All as ser item No 104 here-in-before but one switch socket combination 5 Amps on independent board
All as ser item No 104 here-in-before but one 3 pin 5 Amp switch socket outlet on same board
All as per item No. 104 here-in-before but with 2.5 Sqmm PVC insulated FRLS and unsheathed copper conductor for switch socket combination 3 pin 15 Amps on independent board with 2.5 Sqmm copper conductor cable as earth lead connected to common earth and dolly.
S&F switch piano flush type 5 Amps single pole one way complete all as specified and directed.
S&F switch socket combination box type multipurpose 2/3 pin suitable for 5 Amps plug top controlled by one switch complete all as specified and directed.
S&F switch socket outlet two in 1, 3 Pin, 5 Amps, 230 Volts complete all as specified.
S&F switch socket combination multipurpose 5 pin/15 Amps box type complete all as specified and directed.
S&F in repair ceiling rose surface bakelite surface 65x50 mm 3 terminals fixed on wall/ceiling and including PVC block complete all as specified and directed.
S&F in repair LED bulb thread/pin type of capacity 10 Watt, complete all as specified and directed.
S&F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by Engineer-in-Charge.
S&F LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.
S&F in repairs lamp holder, PVC/ polycarbonate type with back plate suitable for batten fitting complete all as specified and as directed.
S&F exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, copper winding of sweep 300m complete all as specified and directed.
M&L sub main wiring with two run single core 4 Sqmm FRLS copper conductor cable PVC insulated, unsheathed, 1100 V including 20 mm dia PVC conduit medium grade ISI marked with all accessories such as Tees, elbows, junction boxes etc, as required fixed on wall alongwith one run of 4 Sqmm single core PVC FRLS insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board and testing on completion etc complete all directed. Note: Two runs of 4 sqmm and one run of 4 sqmm cable and one run of PVC conduit shall be measured as one RM.
S&F in repairs MCB DB 8 way sheet metal enclosure SPN 240 Volts, 50 Hz, with IP-42 protection, double door with 200 Amps standard bus bar of suitable size and common neutral link all enclosed in standard sheet flush mounting complete all as specified.
S&F in repairs Amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of 6 to 32 Amps and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified.
S&F Amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) SPN 32 Amps of current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed.
Supply, laying and fitting 1100 Volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, with two single core cables flat or circular 16 sq. mm 2 core complete all as specified and directed.
M&L in repairs for earthing complete with galvanized steel earth plate electrode 600mm x 600mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to galvanized earth wire of 4 mm dia (up to 7.5 m in length from earth plate) by means of bolts and nuts checknuts and washers of galvanized iron or steel all as specified and shown in electrical plate no.3 of SSR part I including necessary excavation and earth work in any type of soil PCC 1:3:6 type C1 chamber with RCC 1:2:4 type B1 40 mm thick cover with MS rod 8mm dia at 150mm c/c in both ways as reinforcement, watering funnel, 20 mm dia light grade for protection of earth electrode, 20 mm dia GI pipe light grade for watering complete all as specified and directed by Engr-in-Charge and testing on completion. Note : The rate is inclusive of necessary earth work, RFR and removal etc.
S&F aluminium anodised barrel tower bolts, 75 mm long complete all as specified.
M/S ESS EMM ENTERPRISES (BID ID -3471283)
M/S HAJI MOHD ASHRAF SUMJI (BID ID -3469894)
M/S DALJIT SINGH TULLA (BID ID -3470994)
M/S Manzoor and Co (BID ID -3476022)
M/S ANUSHA ENTERPRISES (BID ID -3470865)
Javeed And Co (BID ID -3471167)
M/S ABDUL MAJID LONE (BID ID -3470940)
m/s mohd saleem and co (BID ID -3475671)
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.33 MB
BOQ_823020.xls
BOQ • 0.36 MB
TOKEN87.pdf
Tender Documents • 1.39 MB
Download all tender documents and submit your bid