REPAIRS/REPLACEMENT OF EE LED FITTINGS INCLUDING INTERNAL WIRING AND DISTRIBUTION BOXES AND ITS CONNECTED E/M ACCESSORIES AT VARIOUS LOCATIONS OF CGDHQ-10 AND TECHNICAL AREA UNDER GE (I) CAMPBELL BAY

Amount

Taking down old unserviceable point wiring, (light, fan, socket or power) complete including fittings & fixtures such as switch, ceiling rose, pendants, regulator, socket, etc., and making good the disturbed surface of wall, floors, ceiling etc to match with the existing including touch up of paint/white wash all as specified and directed by Engineer- in-charge.

M & L for Point wiring with 1.5 Sq mm single core copper conductor FRLS PVC insulated unsheathed 1100 Volts multistranded drawn through and including rigid FRLS PVC rigid conduit and its accessories of suitable size, heavy grade ISI marked concealed on walls /roof and MS pressed steel terminal boxes of 1.6 mm thick of suitable size duly painted with red oxide metal primer including fixing/grouting sunken/ surface and making the adjacent surfaces smooth through POP work & painting as per site requirement incl provision of modular cover plates for mounting the switches / sockets/ regulators etc including running up of 1.5 Sq mm multistranded copper conductor flame retardant PVC insulated cable as earth continuity conductor along with wiring and connecting to the common earth dolly all as specified for : (a) One light point controlled by one, one way switch 5 Amps

(b) One Ceiling Fan / exhaust fan point controlled by one, one way switch and regulator

(c) One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board.

(d) One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board .

(e) One bell point controlled by one, bell switch 5 Amps

(f) One light point controlled by one, two way switch 5 Amps

Description all as per item No 2 here in before but using 2.5 sq mm single core copper conductor cable of multistranded FRLS PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket cobmination point incl running of 1.5 sq mm multistranded copper conductor flame retardant PVC wire as earth continuity conductor along with wiring and connecting to the common eath dolly.

M & L for Point wiring with 1.5 Sq mm copper conductor multistranded FRLS PVC insulated unsheathed 1100 Volts multistranded drawn through and including rigid PVC caping and casing surface type and accessories of suitable size ISI marked and terminal boxes of 1.6 mm thick of suitable size including fixing/grouting sunken/ surface as per site requirement incl provision of modular cover plates for mounting the switches / sockets/ regulators etc including running up of 1.5 Sq mm multistranded copper conductor flame retardant PVC insulated cable as earth continuity conductor along with wiring and connecting to the common earth dolly all as specified for : (a) One light point controlled by one, one way switch 5 Amps

(b) One Ceiling Fan / exhaust fan point controlled by one, one way switch and regulator

(c) One 3 pin 5 Amps switch socket outlet point controlled by one switch on the same board.

(d) One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board .

(e) One bell point controlled by one, one way bell switch 5 Amps

(f) One light point controlled by one, two way switch 5 Amps

Description all as per item No 9 here in before but using 2.5 sq mm single core copper conductor cable of multistranded FRLS PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket cobmination point incl running of 1.5 sq mm copper conductor flame retardant PVC wire as earth continuity conductor along with wiring and connecting to the common eath dolly all as specified and directed .

S&F in repairs flush type piano switch one way 5 A.

S&F in repairs flush type piano switch socket combination one way 5 A.

S&F in repairs flush type piano switch socket 5 A -2/3 pin.

S&F in repairs flush type piano switch socket 5 A/15 A-2/3 .combination with neon indicator.

S&F in repairs flush type piano switch two way 5 A , 1 module.

S&F in repairs Bell push 5 A flush type.

S & F ceiling fan regulator step type, modular type heavy duty suitable to work on 230 volts Ac supply complete all as specified.

S & F ceiling rose three terminal surface bakelite type AC 50 Hz 230 volts of size 65 x 50 mm complete all as specified.

S&F in repairs Bell, Ding Dong AC 230 volts, single pole all as specified and directed .

Material and labour for submain wiring with single core PVC insulated FRLS multistranded copper conductor cable of size 2 x 4.0 Sqmm drawing into and including rigid non metallic PVC conduit, medium grade not less than 20mm dia ISI marked ivory colour with all conduit fittings and fixing accessories and 4.0 Sqmm FRLS multistranded copper conductor cable as continuous earth wire incl taking out old wire complete as directed by Engr in Charge

Material and labour for submain wiring with single core PVC insulated FRLS multistranded copper conductor cable of size 2 x 6.0 Sqmm drawing into and including rigid non metallic PVC conduit, medium grade not less than 20mm dia ISI marked ivory colour with all conduit fittings and fixing accessories and 6.0 Sqmm FRLS multistranded copper conductor cable as continuous earth wire incl taking out old wire completeas directed by Engr in Charge .

Material and labour for submain wiring with single core PVC insulated FRLS multistranded copper conductor cable of size 4 x 6.0 Sqmm drawing into and including rigid non metallic PVC conduit, medium grade not less than 20mm dia ISI marked ivory colour with all conduit fittings and fixing accessories and 6.0 Sqmm FRLS multistranded copper conductor cable as continuous earth wire incl taking out old wire completeas directed by Engr in Charge .

M&L for SPN enclosure with two pin and earth plug and socket with 240 volts 20 Amp SPN MCB including removal old unsv one complete all as specified .

S & F in replacement sheet metal enclosure MCB DB SPN 4 way with 200 Amps rated bus bar 240 volts double door with magnitic locking system including refixing / fixing of incomming & outgoing MCBs and making smooth the wall surfaces complete all as specified.

S & F in replacement sheet metal enclosure MCB DB SPN 8 way with 200 Amps rated bus bar 240 volts double door with magnitic locking system including refixing / fixing of incomming & outgoing MCBs and making smooth the wall surfaces complete all as specified.

S & F in replacement sheet metal enclosure verticle MCB DB TPN 4 way with 200 amps rated bus bar 415 volts double door with magnetic locking system including refixing / fixing of incomming & outgoing MCBs and making smooth the wall surfaces complete all as specified Note:- (i) New MCBs if required for replacement shall be measured and paid seperately under appropriate item as ''Supply only'' (s) of this schedule. However labour element involved in replacement is included in unit rate quoted against this Item. (ii) Rates for refixing old serviceable MCBs are deemed to be inclusive in above quoted rates.

Supply only MCBs of following rating (a) MCB SP 6 to 32 Amps 240V 10 KA. "C" Series

(b) MCB DP 32 Amps 240V 10 KA. "C" Series

(c) MCB TP 32 Amps 415V 10 KA. "C" Series

(d) MCB TPN 63 Amps 415V 16 KA. "C" Series Note:- MCBs / MCCBs will have to suite upon with the base of the existing Panel / DB as per site requirement

S & F in repairs switch piano single pole flush type 5 amps, 230 volts including removal old existing unsv one complete all as specified and directed.

S & F in repairs socket combination flush type multipurpose 2/3 pin 5 amps 2 in 1, 230 Volts all as specified including removal old existing unsv one complete all as specified and directed.

S & F in repairs switch socket combination flush type multipurpose 2/3 pin 5 amps 2 in 1 230 Volts all as specified including removal old existing unsv one complete all as specified and directed.

S & F in repairs switch socket combination 2 in 1 multipurpose 3/5 pin 5/15 amps flush type including removal old existing unsv one complete all as specified and directed.

S & F wall mounted LED 18/20 watts with out put of 1800 lumens , box type (decorative) light fitting, 230 volts with extruded aluminium heat sink provided for efficient heat dissipation and intregrated electronic driver connector block etc complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including LED tube 4' x 18 watts including removal old existing unsv tube light fitting complete all as specified and as directed. Make :- Bajaj, Philips, Wipro, Havells, Syska, Jaguar

S & F Ultra bright LED Tubelight 18/20 with out put of 1800 lumens (single side connection) with very high efficacy suitable for installation in existing tubelight G13 lamp holders to give glare free light with necessary wiring and removal old existing unsv tube from fitting complete all as specified and as directed. Make :- Bajaj Philips, Wipro, Havells, Syska, Jaguar

S & F Energy saving new generation 10 watts LED bulk head fitting IP 65 luminaire with opel diffuser pre wired and necessary mounting arrangements , provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including LED bulb and removal old existing unsv tube light fitting complete all as specified and as directed. Make :- Bajaj, Philips, Wipro, Havells, Syska, Jaguar

S & F Surface mounting 10 Watt LED Luminaries with epoxy white powder coated CRCA sheet steel housing with reeded translucent acrylic diffuser and 1 x 10 Watt LED fitting including taking down old unserviceable fittings any type complete all as specified and as directed . Make : Phillips , Bajaj, Wipro

Taking out the existing any type fittings on ceilings and S & F 36 Watt LED Luminaire suitable for 600x600mm modular ceiling grid including frame of suitable size of above LED light with high efficiency PMMA diffuser gives soft glare free light with available lumen output from 3600 total lumen.The 36 W system shall be operating at 220-240v AC supply having internal driver .IP20,surge protection 2KV ,ambient temperature -20 to 45 degree C, frequency 50 to 60 Hz ,The system efficacy must be between80-100 lumen /watt ,with 70% lumen maintenance upto 50000 Br Hrs with uniform visually comfortable light output at 150 degree beam spread , CRI minimum 80. PF should be greater than 0.95 , THD < 10% . Indivisual LED's should not be visible for glare free output ,colour temperature 6500k all as directed. Make :- Bajaj, Philips, Wipro, Havells, Syska, Jaguar

M/S Sudhir Kumar Gupta

RSL Construction

kakolil trade agencies