CARRYING OUT REPAIRS ROUTINE MAINTENANCE OF LIFTS AT AKASH BADAL CHANDRA VANDANA AND VISAKHA BLDG AT OUTLAYING AREA ALONGWITH MANNING AND OPERTAION AT NOFRA UNDER GE (NW) NOFRA COLABA MUMBAI

Amount

Repair/maintenacne of lifts including carrying out daily check and periodical services of fully automatic electrical lift with power operated door, simplex collective control system with repair/maintenance of unserviceable damaged parts such as bearings, bushes, all type of guide shoes, headers, hangers, door ropes,door cards,car door sills, landing door sills, door locks, control cards, and its contacts, hall push buttons and its spares, connector/links, welding of crack/broken and MS parts, Landing operating Panel of any size and capacity, repairs /maint of u/s damaged door safety edge and sensor mechanical safety lock, magnetic lock or contact, car position indicator, and all connected accessories, necessary wiring of hall push button assembly, repair/maintenance of broken COP/LOP buttons and display, including cover, Fire alarm, Firemen button glass, Intercom, alarm/hooters, Maintenance of damaged hand rail, Shaft, light/switches, complete with illuminated push button and direction indicator with LED display with LPT/LPC card of stainless steel inclusive of harness wiring for laminating of push button of each floors and cutting wall making good disturbed surface with masonry work to make with existing surface, broken granites & cable as per requirement for safe operation of lifts , fixing of loose rail bracket with necessary masonry work ,cabin, minor repair of cabin light and minor repair of cabin fan , ensure safe and smooth functioning of lift and complete maint of car top, binding of loose wire at control panel and rust painting at car top and door and allied parts with testing, two coats of Painting of Gear motor, all MS channels and Control panels using spray gun complete, dewatering of lift wells in case of any emergency arise all as directed by Engineer-in-Charge. for the following lifts:- Note : - (i) Two mechanic shall be available round the clock at lift complaint cell for safe & smooth functioning of the lift. (ii) Rewinding of motor if required will be done by the contractor and no extra cost will be given by the department.(iii) The detailed duty mechanics of the firm shall report to the JE Concerned at the Lift complaint cell for receiving the complaints at round the clock daily including sunday and holiday.(iv) The detailed lift mechanics shall sign ( Their shift wise) in the attendence register kept with lift cell. (v) If he is found to absent or move without intimating to Engr-in-Charge of lift cell of JE E/M he will be treated as absent forthe said shift and recovery to this effect for Rs 1,500/- per shift shall be affected. (vi) Two coats of painting of Gear and motor and all MS channels and control Panels using spray gun complete, dewatering of lift wellls in case of any emergency arise all as directed by Engr-in-Charge. Location :- Akash(G+12) 02 Nos lift 08 PS (544 Kg)01 13 PS (1000Kg) Badal (G+10) 08 PS (544 Kg) 01 No 13PS (1000Kg) 01 Nos Chandra (G+10) 08 PS 01 No (544 Kg) 13 PS 01 No (1000 Kg) Make ECE. Total (03+02+02) 07 Nos Lift.

All as per item No 1.00 herein before but 13 passenger G + 15 upper floors in building Vandana general 01 Nos lifts of KONE Make.

All as per item No 1.00 herein before but 13 passenger G + 15 upper floors in building Vandana Goods lift (2000Kg) 01 Nos lifts of Kone Make.

All as per item No 1.00 herein before but 13 passenger G + 15 upper floors in building Vishaka General 01 nos lift of Kone Make.

All as per item No 1.00 herein before but 13 passenger G + 15 upper floors in building Vishaka Goods lift (2000Kg) 01 Nos lifts of Kone Make.

Dismantling and taking out unserviceable control panel and control wiring and supply and fix new control panel in hinged MS powder coated , with control wiring comprising with multiple microcontroller programmed chip based, controlled by pulse modulation, complete with all safeties such as thermal overload protection, over current protection, auto phase link to each other in network, and compatible to existing capacity VVVF drive including proper connection with proper lugs, terminal connectors screws and motor connection with galvanised sheet trucking 24 SWG including wiring of main motor with suitable size of stranded copper cable etc Complete all as specified and directed by Engineer-in-Charge.

Disconnecting and taking out old defective V3F door operator with all connected accessories from existing car door, supply and fix new V3F door drive operator suitable to existing motor mechanism unit suitable for existing door opening and connected with existing system including testing and commissioning complete for smooth and jerk free working of lift car door complete all as specified and directed by Engineer-in-Charge.

Disconnecting and taking out old defective infra red door sensor of any type and make and supply and fix new infra red door sensor of up to full length of car door complete all as specified and directed by Engineer-in-Charge.

Replacement of existing unserviceable landing push button box complete with stainless steel plate push buttons and combined digital position indicator and arrow indicator complete all as specified and directed by Engineer In Charge.

Supplying & fixing new car operating panel complete all as specified and directed by Engineer-in-Charge including taking down old.

Taking down unserviceable cabin fan from car cabin and supply and fixing new new car cabin fan non oscilatting type axist flow single speed 300mm sweep, 240 volts ISI mark with grill complete all as specified & directed by Engr-in-Charge.

Dismantling of existing old wires and complete new wiring of the lift shaft with copper wire 16/.02 from lift room control panel to motor break devices and landing floor switch locks outside push button with indicators from half way junction for all landing and also to lift inside push button. Complete all as specified and directed by Engineer-in-Charge.

Dismantling and taking out defective batteries of automatic rescue devices and supplying and fixing new maintenance free batteries suitable for ARD including necessary connection.7 AH 12 V. Complete all as specified and directed by Engineer-in-Charge.

Dismantling and taking out defective batteries of automatic rescue devices and supplying and fixing new maintenance free batteries suitable for ARD including necessary connection.17 AH 12 V. Complete all as specified and directed by Engineer-in-Charge.

Complete Machine Overhauling by opening of Gear removing old dirty oil, cleaning & Replace of new Gear oil refitting of the same with new packing & adjustment of thrust bearing & keep it into perfect working order.complete all as specified and directed by Engineer-in-Charge.

Supply and fix Aluminum covered wire wound dynamic breaking resistor to absorb the reserve energy dissipation of motor during regeneration in control operation suitable for existing capacity motor up to 15 HP VFD complete all as specified and directed by Engineer-in-Charge.

S&F New Rope Load Sensor at Certain k lifts at Outlaying area complete all as directed by Engineer-in-Charge in certain building at Nofra.

Dismantling and taking out unserviceable existing landing door from various floors with its header, lock, brake, safety contact, MS cill etc & supply and fix new stainless steel 18 SWG center opening by horizontal sliding stainless steel panel auto door for landing & car complete with header, cill, brackets, bearings, safety contact electro magnetic gate lockset complete all as per existing size and design including necessary cutting, opening in masonry work & making good disturbed surfaces Badal goods lift.Vishaka general,Vandana general lift Complete all as specified and directed by Engineer In Charge.

Dismantling and taking out unserviceable car door from car cabin supplying & fixing new car door comprise of 02 Nos power operated center opening by horizontal sliding stainless steel panel of 18 SWG with hair line finish flush type panels complete with removed header, hanger door drive unit with full beam infra red sensor upto full length of car door aluminium sill VVVF connection complete all as specified and directed by Engineer in Charge.

Supplying and fixing in replacement car door (VVVF) drive with all accessories to match the existing complete all as specified and directed by Engineer in Charge

Dismantling existing defective & worn-out blower fan of main motor supply & fix new blower fan complete all as specified and directed by Engineer in Charge

Supplying & fixing emergency alarm system hooter assembly on ground floor landing complete with PCB card battery charging unit and speaker including necessary control electric connection wiring with COP and control panel complete all as specified and directed by Engineer in Charge

Supply and fix new main VVVF drive unit of suitable for 15 KW capacity in existing panel and connected with existing system including testing and commissioning complete for smooth and jerk free working of lift.complete all as specified and directed by Engineer in Charge

Supply & fix in replacement LED light square/circle type fix to existing false ceiling with complete wiring and all required necessary items complete all as specified and directed by Engineer in Charge

Replacement of unserviceable main steel wire rope after disconnecting from counter weight pulley and car cabin supply and fix main steel wire rope size 13 mm dia, 8/19 construction in and including necessary connection with counter weight pulley and car cabin with clamps, nuts, bolts and washer etc complete all as specified and directed.

Taking out of unserviceable governor steel wire rope after disconnecting & supply and fix new steel wire rope 8mm dia ungalvanized, 8/19 construction including necessary connection with pully in machine room, and shaft pit complete with clamp, nut, bolt washer, etc.complete all as specified and directed by Engineer in Charge

Taking out unserviceable travelling cable from hoist way, supply and fixing new travelling cable PVC insulated 16 core flat/ Round type with stranded copper conductor, 1100 Volts grade of size of 0.75 Sqmm confirming to relevant IS in and including thimbles, suspended type freely move with car cabin up and down movement between ground and upper floors including necessary proper connection with mid way junction and other connection required in circuit complete all as specified and directed by Engineer in Charge

Mannual operation of electrically operated lifts fully automatic capacity 13 passengers/ 06 Passengers/ 08 Passengers/ Goods lifts of any capacity to serve any Nos of floor 16 hrs daily in one shifts in two bldgs from 0600 Hrs to 1400 Hrs & 1400 Hrs to 2200 Hrs including Sundays & holidays including taking care from any pilferage, theft or damage of lifts etc complete all as directed for the following buildings:- (i) Akash Bldg (ii) Badal bldg (iii) Chandra Bldg (iv) Diwakar Bldg (v) Vishakha Bldg (vi) Vandana Bldg Note :- (i) One Lift operator to be employed in two buildings per shift (03 operators for 06 buildings). (ii) Passes will be processed only after verification of antecedence of deployed employees and submission of verified experience certificate, Pass shall not be granted without submission of qualification proof & experience certificate for lift operator. In case of OEM, the qualification mentioned in note is not applicable which shall be verified by Engineer-in-Charge before issue of passes (iii) Contractor shall submit ID proof, Residential proof, Bank A/C details to department and obtain approval of Engineer-in-Charge before employing a person as Operator (iv) Payment to employees shall be done by crossed cheque through Aadhaar linked bank account only and it shall not be less than minimum fair wages as per act in vogue. The contractor shall submit proof to Engineer-in-Charge before claiming any payment. (v) Lift operator (semi skilled) shall be available with lift cell as per the shift timings specified in the tender and he will report to JE E/M in-Charge or Lift Cell in-Charge. In case of emergency he will function according to their direction. If he is found absent or move without intimating to in-Charge of Lift Cell or JE E/M he will be treated as absent for the said shift and recovery to this effect for Rs 1500/- per shift shall be affected.(v) Payment as per quoted rate shall also be deducted in addition to the penalty as specified above. (vi) In case of malfunctioning if any noticed, lift operator shall intimate to the lift cell. The individual employed as lift operator should has minimum qualification of 10th pass or equivalent from state or central board

(vii) Contractor shall submit the labour licenece VAT as applicable as per latest laws/acts & Copy of GST Regn registered number issued by concerned authority. (viii) Insurance coverage, compensation if any applicable or necessitated due to mis operation of lift shall be the responsibility of contractor. The quantum of compensation shall be assessed based on the BOO composing of Lift Inspector of Maharashtra State, representatives of both agencies carrying out M&O works and routine maintenance work of lift and members from department. (ix) Contractor has to submit proof of payment of EPF subscription made by him as applicable as per latest laws/acts alongwith RAR failing which RAR will not be progressed for payment. (x) The rates quoted by the contractor shall be deemed to be included provision of all latest labour laws / regulations including all relevant taxes as applicable. (xi) The bidders are advised not to quote rate less than minimum fair wages as circulated by competent authority. If the quoted amount is less than the estimated cost of work mentioned in BOQ item No 28.00 i.e Rs 21,58,200.00, the lowest bidder will have to deposit FDR/BGB as elaborated herein after in favour of Accepting Officer within 07 days of opening of financial bid (Cover No 2). The deposited amount shall be the difference between estimated cost mentioned in BOQ item No 28.00 (i.e) Rs 21,58,200.00 and amount quoted by lowest bidder. FDR/BGB shall be released only after satisfactory completion of work. If the contractor fails to pay minimum wages to employees, the department shall have right to withhold the said amount which will be verified by GE. The decision of Accepting Officer regarding amount to be withhold shall be final and binding. The withhold amount will be utilised by GE for payment to employees if contractor fails to pay minimum wages and balance amount if any shall only be released. If the lowest bidder fails to deposit the amount as stated above within 07 days, the contractor shall be banned for 06 months & his bid shall be rejected. The contractor shall sumbit 03 Nos of BGBs/FDRs of equal amount as mentioned above. The BGBs/FDRs validity shall be 04 months, 08 month & 12 months respectively for the purpose of encashment/ release as the case may be. (xii) The rates quoted shall be inclusive of suitable reliver wherever sundays & holidays are mentioned for working

Monarch Enterprises

Veer High Tech Solution

shakti engineering and electrical works

Escon Elevators Pvt Ltd