Loading
Loading…
Loading…
Tender Value
₹48.0 L
EMD Value
₹96,500
Closing Date
9 Sept 2026, 6:00 pm
GE 860 EWS
GE 860 EWS PIN-913860 c/o 56 APO
PROVN OF 01 ORs LIVING BARRACK AND WASHING POINT OFFRS MESS AT KIARI AND SPL REPAIR TO BLDG NO. T-154-0-5 AT KARU UNDER GE 860 EWS
2026_MES_785264_1
8179/2026-27/E8
Open Tender
Civil Works
Item Rate
270 days
KIARI AND KARU
As per Tender documents
9 documents required · 9 mandatory
₹500
GE 860 EWS Karu
₹96,500
Yes
19 Aug 2026
19 Aug 2026
11 Sept 2026
19 Aug 2026
9 Sept 2026
2 Sept 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Surface dressing n exc 15 cm deep in soft /loose soil | 198.25 | Sqm | - | - |
| 2 | Excavating in post holes (or similar holes)each n. exc 0.5 cum, getting out, returning, fillingin and ramming erth pr broken rubble mixed with eart around, in layers not exc 25 cm all as specified and directed by Engr in charge. | 30 | Each | - | - |
| 3 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard /dense soil | 79.22 | Cum | - | - |
| 4 | Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point | 40.62 | Cum | - | - |
| 5 | M&L for Cement concrete type D2 1:4:8 (40 mm graded aggregate) in foundations, filling and mass concrete | 5.64 | Cum | - | - |
| 6 | M&L Cement Concrete Type-B1 (1:2:4)) in foundations,including rafts, footings complete all as specified and directed. | 5.76 | Cum | - | - |
| 7 | M&L for reinforced cement concrete (Nominal mix) 1:2:4 (using 20mm graded aggregate) as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed. | 4.29 | Cum | - | - |
| 8 | M&L for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc rough finished surfaces of concrete complete all as specified and as directed. | 73.3 | Sqm | - | - |
| 9 | S & F Mild steel bars 10 mm dia and over Fe-410 W(Gde E 250) cut to length bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips all as specified and directed by Engr in charge. | 869.14 | Kg | - | - |
| 10 | M &L mild steel TMT bars 5mm dia and over upto and including 10mm dia as in stirrups, cut to length, bent to shape required, including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire(annealed ) not less than 0.9mm dia or securing with clip complete all as specified and as directed. | 460 | Kg | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.43 MB
Tender1.pdf
Tender Documents • 0.65 MB
Tender2.pdf
Tender Documents • 1.18 MB
Tender3.pdf
Tender Documents • 0.20 MB
BOQ_879939.xls
BOQ • 0.40 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].