Construction Work

Bill Of Quantities

Name of Work:- " Construction of balance works of Regional Centre for Lalit Kala Akademi at 85 A.J.C Bose Road,

Kolkata – 700 014 to be executed at Risk and Cost of previous agency."

Sl. No. Ref. Name of Estimate Unit Rate Quantity for BOQ Amount for BOQ

PART-I: SCHEDULE WORKS

SH: 2.0 EARTH WORK

1 2.8 Earth work in excavation by mechanical means (Hydraulic

excavator) / manual means in foundation trenches or drains (not

exceeding 1.5 m in width or 10 sqm on plan), including dressing

of sides and ramming of bottoms, lift upto 1.5 m, including

getting out the excavated soil and disposal of surplus excavated

soil as directed, within a lead of 50 m.

2.8.1 All kinds of soil Cum 157.50 - -

2 2.25 Filling available excavated earth (excluding rock) in trenches,

plinth, sides of foundations etc. in layers not exceeding 20cm in

depth, consolidating each deposited layer by ramming and

watering , lead up to 50 m and lift up to 1.5 m.

3 2.26 Extra for every additional lift of 1.5 m or part thereof in

excavation / banking excavated or stacked materials. - -

2.26.1 All kinds of soil - -

additional Lift of exceeding 1.5m & upto 3.0m Cum 46.25 43.83 2,027.36

additional Lift of exceeding 3.0 & upto 4.50m Cum 92.50 - -

additional Lift of exceeding 4.50m & upto 6.00m Cum 138.75 - -

4 2.27 Supplying and filling in plinth with Jamuna sand under floors,

including watering, ramming, consolidating and dressing

complete. Cum 910.25 - -

5 2.28 Surface dressing of the ground including removing vegetation

and inequalities not exceeding 15 cm deep and disposal of

rubbish, lead upto 50 m and lift upto 1.5 m. - -

2.28.1 All kinds of Soil

6 2.2 Supplying and stacking of good earth at site including and

Horticulture carriage upto 5 km (earth in stacks will be reduced by 8% for

SH: 4.0, CONCRETE WORK - -

7 4.1 Providing and laying in position cement concrete of specified

grade excluding the cost of centering and shuttering - All work

upto plinth level. - -

4.1.8 1:4:8 (1 Cement :4 Coarse sand : 8 graded stone aggregate 40

mm nominal size) Cum 4,301.15 - -

8 4.10 Providing and laying damp-proof course 40mm thick with

cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded

stone aggregate 12.5mm nominal size). Sqm 257.80 5.00 1,289.00

9 4.12 Extra for providing and mixing water proofing material in cement Per 50

concrete work in doses by weight of cement as per Kg of

manufacturer‟s specification. cement 48.15 5.00 240.75

10 4.13 Applying a coat of residual petroleum bitumen of grade of VG-10

of approved quality using 1.7kg per square metre on damp proof

course after cleaning the surface with brushes and finally with a

piece of cloth lightly soaked in kerosene oil.

11 4.17 Making plinth protection 50mm thick of cement concrete 1:3:6 (1

cement :3 coarse sand : 6 graded stone aggregate 20mm

nominal size) over 75mm bed by dry brick ballast 40mm nominal

size well rammed and consolidated and grouted with fine sand

including finishing the top smooth

SH: 5.0, REINFORCED CEMENT CONCRETE - -

12 5.9 Centring and shuttering including strutting, propping etc. and

removal of form for:

5.9.1 Foundations, footings, bases of columns etc. for mass concrete.

5.9.2 Walls (any thickness) including attached pilasters, butteresses,

plinth and string courses etc. Sqm 360.80 0.00 0.54

5.9.3 Suspended floors,roofs, landings, balconies and access

platform. Sqm 401.65 - -

5.9.5 Lintels, beams, plinth beams, girders, bressumers and

cantilevers. Sqm 332.15 - -

5.9.6 Columns, pillars, piers, abutments, posts and struts Sqm 453.35 - -

5.9.7 Stairs, (excluding landings) except spiral staircases Sqm 395.65 - -

ANIRBAN ANIRBAN ROY

ROY 17:10:08 IST

Sl. No. Ref. Name of Estimate Unit Rate Quantity for BOQ Amount for BOQ

5.9.15 Small lintels not exceding 1.5m clear span, moulding as in

cornices, window sills, string courses, bands, copings, bed

plates, anchor blocks and the like. Sqm 196.45 5.00 982.25

5.9.16 Edges of slabs and breaks in floors and walls, - -

5.9.19 Weather shade, Chajjas, corbels etc. including edges Sqm 492.55 - -

13 5.11 Extra for additional height in centering, shuttering where ever

required with adequate bracing, propping etc., including cost of

de-shuttering and decentering at all levels, over a height of 3.5

m, for every additional height of 1 metre or part thereof (Plan

area to be measured). - -

5.11.1 Suspended floors, roofs, landing, beams and balconies (Plan

area to be measured) Sqm 159.05 354.68 56,411.26

14 5.22 Steel reinforcement for R.C.C. work including straightening,

cutting, bending, placing in position and binding all complete

upto plinth level. - -

5.22.6 Thermo Mechanically Treated bars Kg 68.10 - -

15 5.22A Steel reinforcement for R.C.C. work including straightening,

cutting, bending, placing in position and binding all complete

above plinth level. - -

5.22A.6 Thermo Mechanically Treated bars. Kg 68.10 2,060.28 140,304.83

16 5.30 Add or deduct plaster drip course/ groove in plastered surface or

mouldig to R.C.C. projections. metre 30.75 - -

17 5.33 Providing and laying in position machine batched and machine

mixed design mix M-25 grade cement concrete for reinforced

cement concrete work, using cement content as per approved

design mix, including pumping of concrete to site of laying but

excluding the cost of centering, shuttering, finishing and

reinforcement, including admixtures in recommended

proportions as per IS: 9103 to accelerate, retard setting of

concrete, improve workability without impairing strength and

durability as per direction of Engineer-in-charge.

(Note :- Cement content considered in this item is @ 330

kg/cum. Excess/less cement used as per design mix is

payable/recoverable separately). - -

5.33.1 All works upto plinth level Cum 6,296.15 - -

5.33.2 All works above plinth level upto floor V level Cum 7,014.55 102.12 716,324.28

18.00 5.35 Add for using extra cement in the items of design mix over and

above the specified cement content therein. Qntl 742.75 - -

SH: 6.0, BRICK WORK - -

19 6.1 Brick work with common burnt clay F.P.S.(non modular) bricks

of class designation 75 in foundation and plinth in: - -

6.1.2 Cement mortar 1:6 (1 cement: 6 coarse sand)

20 6.4 Brick work with common burnt clay F.P.S. (non-modular) bricks

of class designation 75 in superstructure above plinth level up to

floor V level in all shapes and sizes in: - -

6.4.2 Cement mortar 1:6 (1 cement: 6 coarse sand) Cum 5,426.15 50.00 271,307.50

21 6.34 Brick work with non modular fly ash bricks conforming to

IS:12894, class designation 10 average compressive strength in

super structure above plinth level up to floor V level in :

6.34.2 Cement mortar 1:6 (1 cement : 6 Coarse sand) Cum 6,006.20 - -

22 6.12 Half brick masonry with common burnt clay F.P.S. (non modular)

bricks of class designation 7.5 in foundations and plinth in :

6.12.2Cement mortar 1:4 (1 cement : 4 coarse sand) Sqm 584.75 25.00 14,618.75

23 6.13 Half brick masonry with common burnt clay F.P.S. (non

modular) bricks of class designation 7.5 in superstructure above

plinth level up to floor V level - -

6.13.2 Cement mortar 1:4 (1 cement : 4 coarse sand) Sqm 665.80 50.00 33,290.00

24 6.45 Half brick masonry with non modular fly ash bricks of class

designation 10, conforming to IS : 12894, in super structure

above plinth and upto floor V level. - -

6.45.2 Cement mortar 1 : 4 (1 cement : 4 coarse sand) Sqm 751.10 - -

25 6.15 Extra for providing and placing in position 2 Nos. 6mm dia. M.S.

bars at every third course of half brick masonry (with F.P.S.

SH: 8.0, MARBLE WORK - -

26 8.2 Providing and fixing 18mm thick gang saw cut mirror polished

premoulded and prepolished) machine cut for kitchen platforms,

vanity counters, windows sills, facias and similar locations of

required size of approved shade, colour and texture laid over

20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand)

with joints treated with white cement, mixed with matching

pigment, epoxy touch ups, including rubbing, curing, moulding

and polishing to edge to give high gloss finish etc. complete at

all levels. - -

8.2.2 Granite of any colour and shade - -

8.2.2.1 Area of slab upto 0.50 sqm Sqm 3,866.00 4.58 17,706.28

8.2.2.2 Area of slab over 0.50 sqm Sqm 3,907.40 - -

Sl. No. Ref. Name of Estimate Unit Rate Quantity for BOQ Amount for BOQ

27 8.4 Extra for fixing marble /granite stone, over and above

corresponding basic item, in facia and drops of width upto 150

mm with epoxy resin based adhesive, including cleaning etc.

complete. metre 247.40 5.00 1,237.00

28 8.5 Extra for providing opening of required size & shape for wash

basin/ kitchen sink in kitchen platform, vanity counter and similar

location in marble/ Granite/stone work, including necessary

holes for pillar taps etc. including moulding, rubbing and

polishing of cut edges etc. complete. Each 386.60 35.00 13,531.00

29 8.9 Stone tile (polished) work for wall lining over 12 mm thick bed of

cement mortar 1:3 (1 cement : 3 coarse sand) and cement slurry

@ 3.3 kg/sqm including pointing in white cement complete.

8.9.1 8mm thick - -

8.9.1.2 Granite of any colour and shade Sqm 1,921.85 10.00 19,218.50

30 8.10 Providing and fixing stone slab with table rubbed, edges rounded

and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in

urinal partitions by cutting a chase of appropriate width with

chase cutter and embedding the stone in the chase with epoxy

grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand :

4 graded stone aggregate 6 mm nominal size) as per direction of

Engineer-in-charge and finished smooth.

8.10.2 Granite Stone of approved shade Sqm 3,263.50 1.50 4,895.25

31 11.41 Providing and laying vitrified floor tiles in different sizes

(thickness to be specified by the manufacturer) with water

absorption less than 0.08% and conforming to IS : 15622, of

approved make, in all colours and shades, laid on 20mm thick

cement mortar 1:4 (1 cement : 4 coarse sand), including

grouting the joints with white cement and matching igments etc.,

complete. - -

11.41.2 Size of Tile 600x600 mm Sqm 1,405.95 - -

SH: 9, WOOD WORK - -

32 9.1 Providing wood work in frames of doors, windows, clerestory

windows and other frames, wrought framed and fixed in position

with hold fast lugs or with dash fasteners of required dia & length

( hold fast lugs or dash fastener shall be paid for separately).

9.1.1 Second Class Teak Wood Cum 91,496.95 - -

9.1.1 Work already executed by the previous agency Cum 73,197.56 - -

9.1.1 Balance Work (Repair, Replacement or any other works

required for final hand over to NBCC / Client at their satisfaction)

33 9.12 Extra for providing frosted glass panes 4 mm thick instead of

ordinary float glass panes 4 mm thick in doors, windows and

clerestory window shutters. (Area of opening for glass panes

excluding portion inside rebate shall be measured). Sqm 5.80 2.28 13.22

34 9.20 Providing and fixing ISI marked flush door shutters conforming

to IS : 2202 (Part I) decorative type, core of block board

construction with frame of 1st class hard wood and well matched

teak 3 ply veneering with vertical grains or cross bands and face

veneers on both faces of shutters. - -

9.20.1 35 mm thick including ISI marked Stainless Steel butt hinges

with necessary screws Sqm 2,606.45 165.09 430,298.83

35 9.26 Extra for cutting rebate in flush door shutters (Total area of the

shutter to be measured). Sqm 104.55 137.07 14,330.67

36 9.33 Providing and fixing expandable fasteners of specified size with

necessary plastic sleeves and galvanised M.S. screws including

drilling holes in masonry work /CC/ R.C.C. and making good etc.

complete. - -

37 9.36 Providing and fixing specified wood frame work consisting of

battens 50x25 mm fixed with rawl plug and drilling necessary

holes for rawl plug etc. including priming coat complete.

9.36.1 Kiln seasoned and chemically treated hollock wood Cum 96,783.70 0.28 26,966.36

38 9.37 Providing and fixing plywood 4 mm thick, one side decorative

veneer conforming to IS: 1328 (type-1), for plain lining / cladding

with necessary screws, including priming coat on unexposed

surface with : - -

9.37.1 Decorative veneer facings of approved manufacture Sqm 1,156.20 91.80 106,139.16

39 9.40 Providing and fixing wooden moulded beading to door and

window frames with iron screws, plugs and priming coat on

unexposed surface etc. complete : - -

9.40.1 2nd class teak wood - -

40 9.47 Providing and fixing nickel plated M.S. pipe curtain rods with

nickel plated brackets : - -

42 9.60 Providing and fixing oxidised M.S. double acting spring hinges

with necessary screws etc. complete. - -

Sl. No. Ref. Name of Estimate Unit Rate Quantity for BOQ Amount for BOQ

43 9.70 Providing and fixing IS : 12817 marked stainless steel butt

hinges with stainless steel screws etc. complete : - -

44 9.87 Providing and fixing bright finished brass hasp and staple (safety

type) with necessary screws etc. complete : - -

45 9.90 Providing and fixing special quality chromium plated brass

cupboard locks with six levers of approved quality including

necessary screws etc. complete. - -

46 9.96 Providing and fixing aluminium sliding door bolts ISI marked

anodised (anodic coating not less than grade AC 10 as per IS:

1868) transparent or dyed to required colour or shade with nuts

and screws etc. complete:

47 9.97 Providing and fixing aluminium tower bolts ISI marked anodised

(anodic coating not less than grade AC 10 as per IS: 1868)

transparent or dyed to required colour or shade with necessary

screws etc. complete:

48 9.100 Providing and fixing aluminium handles ISI marked anodised

(anodic coating not less than grade AC 10 as per IS : 1868)

transparent or dyed to required colour or shade with necessary

screws etc.complete:

49 9.101 Providing and fixing aluminium hanging floor door stopper ISI

marked anodised (anodic coating not less than grade AC 10 as

per IS:1868) transparent or dyed to required colour and shade

with necessary screws etc. complete.

9.101.2 Twin rubber stopper Each 83.95 114.00 9,570.30

50 9.102 Providing and fixing aluminium casement stays, ISI marked,

anodised (anodic coating not less than grade AC 10 as per IS :

1868) transparent or dyed to required colour and shade, with

necessary screws etc. complete. Each 74.95 80.00 5,996.00

51 9.112 Providing and fixing 2nd class teak wood lipping/ moulded

beading or taj beading of size 18X5 mm fixed with wooden

adhesive of approved quality and screws/ nails on the edges of

the Pre-laminated particle board as per direction of Engineer-in-

52 9.114 Providing and fixing magnetic catcher of approved quality in

cupboard / ward robe shutters, including fixing with necessary

screws etc. complete. - -

9.114.2 Double strip (horizontal type) Each 22.80 30.00 684.00

53 9.115 Providing and fixing powder coated telescopic drawer channels

300 mm long with necessary screws etc. complete as per

directions of Engineerincharge. One set 198.95 15.00 2,984.25

54 9.119 Providing and fixing factory made P.V.C. door frame of size

50x47 mm with a wall thickness of 5 mm, made out of extruded

5mm rigid PVC foam sheet, mitred at corners and joined with 2

Nos of 150 mm long brackets of 15x15 mm M.S. square tube,

the vertical door frame profiles to be reinforced with 19x19 mm

M.S. square tube of 19 gauge, EPDM rubber gasket weather

seal to be provided through out the frame. The door frame to be

fixed to the wall using M.S. screws of 65/100 mm size, complete

as per manufacturer‟s specification and direction of Engineerin-

Sl. No. Ref. Name of Estimate Unit Rate Quantity for BOQ Amount for BOQ

55 9.120 Providing and fixing factory made panel PVC door shutter

consisting of frame made out of M.S. tubes of 19 gauge

thickness and size of 19 mm x 19 mm for styles and 15x15 mm

for top & bottom rails. M.S. frame shall have a coat of steel

primers of approved make and manufacture. M.S. frame

covered with 5 mm thick heat moulded PVC „C‟ channel of size

30 mm thickness, 70 mm width out of which 50 mm shall be flat

and 20 mm shall be tapered in 45 degree angle on both side

forming styles and 5 mm thick, 95 mm wide PVC sheet out of

which 75 mm shall be flat and 20 mm shall be tapered in 45

degree on the inner side to form top and bottom rail and 115 mm

wide PVC sheet out of which 75 mm shall be flat and 20 mm

shall be tapered on both sides to form lock rail. Top, bottom and

lock rails shall be provided both side of the panel. 10 mm (5 mm

x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap

insert for top rail & bottom rail, paneling of 5 mm thick both side

PVC sheet to be fitted in the M.S. frame welded/ sealed to the

styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC

sheet beading on inner side, and joined together with solvent

cement adhesive. An additional 5 mm thick PVC strip of 20 mm

width is to be stuck on the interior side of the „C‟ Channel using

PVC solvent adhesive etc. complete as per direction of Engineer- - -

9.120.2 in-charge,

30 mm thick manufacturer‟s

pre laminatedspecification & drawing.

PVC door shutters Sqm 3,214.20 5.00 16,071.00

56 9.136 Providing and fixing fire resistant door frame of section 143 x 57

mm having built in rebate made out of 16 SWG G.I. sheet (zinc

coating not less than 120 gm/sqm) duly filled with vermuculite

based concrete mix, suitable for mounting 60 minutes fire rated

door shutters. The frame is fitted with intumuscent fire seal strip

of size 10x4 mm (minimum) alround the frame and fixing with

dash fastener of approved size and make, including applying a

coat of approved brand fire resistant primer etc. complete as per

direction of Engineer-in-charge (Dash fastener to be paid for

57 9.137 Providing and fixing 50 mm thick glazed fire resistant door

shutters of 60 minutes fire rating conforming to IS:3614 (Part-II),

tested and certified as per laboratory approved by Engineer-in-

charge, with suitable mounting on door frame, consisting of

vertical styles, lock rail, top rail 100 mm wide, bottom rail 200

mm wide, made out of 16 SWG G.I.sheet (zinc coating not less

than 120 gm/m2) duly filled FR insulation material and fixing with

necessary stainless steel ball bearing hinges of approved make,

including applying a coat of approved fire resistant primer etc. all

complete as per direction of Engineer-in-charge (panneling to be

paid for separately).

58 9.138 Providing and fixing glazing in fire resistant door shutters, fixed

panels, ventilators and partitions etc., with G.I. beading of

appropriate size, made out of 20 SWG G.I.sheet (zinc coating

not less than 120 gm/m2), fire resistant sealant, including

applying a coat of approved fire resistant primer on G.I. beading

etc., complete all as per direction of Engineer-in-charge.

9.138.1 With clear fire resistant glass panes 6mm thick of approved

brand, having minimum 60 minutes fire resistance Sqm 27,658.70 2.16 59,742.79

59 9.139 Providing and fixing panic bar / latch (Double point) fitted with a

single body, Trim Latch & Lock on back side of the Panic Latch

of reputed brand and manufacture to be approved by the

Engineer- in- charge, all complete. Each 6,133.20 12.00 73,598.40

60 9.157 Providing and fixing Pre-laminated medium density fibre board

IS: 14587:1998 marked, with one side decorative lamination

other side balancing lamination Grade-I(exterior grade) in

shelves with screws and fittings wherever required, edges to be

sealed with PVC edge bending tape 2.00 mm thick of approved

brand (fittings to be paid separately). - -

9.157.1 Pre-laminated with decorative lamination one side and other

side balancing lamination exterior Grade - I MDF Board 18 mm

thick confirming to IS:14587 Sqm 1,394.55 83.40 116,305.47

61 9.159 Providing and fixing 25mm thick pre-laminated medium density

fibre board exterior grade ( Grade-I) IS:14587:1998 marked one

side decorative and other side balancing lamination for cupboard

shutters edges to be sealed with PVC edge bending tape 2.00

mm thick of approved brand including ISI marked nickeled

plated bright finishing M.S. piano hinges IS:3818 marked with

necessary screwed complete. Sqm 1,883.00 36.00 67,788.00

SH: 10, STEEL WORKS - -

62 10.5 Providing and fixing 1mm thick M.S. sheet door with frame of

40x40x6 mm angle iron and 3 mm M.S. gusset plates at the

junctions and corners, all necessary fittings complete, including

applying a priming coat of approved steel primer. - -

10.5.2 Using flats 30x6mm for diagonal braces and central cross piece

Sl. No. Ref. Name of Estimate Unit Rate Quantity for BOQ Amount for BOQ

63 10.13 Providing and fixing T-iron frames for doors, windows and

ventilators of mild steel Tee-sections, joints mitred and welded,

including fixing of necessary butt hinges and screws and

applying a priming coat of approved steel primer. - -

10.13.1 Fixing with 15x3 mm lugs 10 cm long embedded in cement

concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse

sand : 6 graded stone aggregate 20 mm nominal size) Kg 83.70 10.00 837.00

64 10.25 Steel work welded in built up sections/ framed work, including

cutting, hoisting, fixing in position and applying a priming coat of

approved steel primer using structural steel etc. as required.

10.25.2 In gratings, frames, guard bar, ladder, railings, brackets, gates

and similar works Kg 90.10 859.13 77,407.79

65 10.28 Providing and fixing stainless steel ( Grade 304) railing made of

Hollow tubes, channels, plates etc., including welding, grinding,

buffing, polishing and making curvature (wherever required) and

fitting the same with necessary stainless steel nuts and bolts

complete, i/c fixing the railing with necessary accessories &

stainless steel dash fasteners , stainless steel bolts etc., of

required size, on the top of the floor or the side of waist slab with

suitable arrangement as per approval of Engineer-in-charge, (for

payment purpose only weight of stainless steel members shall

be considered excluding fixing accessories such as nuts, bolts,

fasteners etc.).

10.28 Work already executed by the previous agency

10.28 Balance Work (Cleaning, Polishing, Repairing , Replacement or

any other works required for final hand over to NBCC / Client at

their satisfaction) Kg 30.97 1,123.68 34,800.37

SH: 11 & 16, FLOORING & ROAD WORK - -

66 11.3 Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4

graded stone aggregate) finished with a floating coat of neat

cement, including cement slurry, but excluding the cost of nosing

of steps etc. complete. - -

11.3.1 40 mm thick with 20 mm nominal size stone aggregate Sqm 353.35 8.40 2,968.14

67 11.4 52 mm thick cement concrete flooring with concrete hardener

topping, under layer 40 mm thick cement concrete 1:2:4 (1

cement : 2 coarse sand : 4 graded stone aggregate 20 mm

nominal size) and top layer 12 mm thick cement hardener

consisting of mix 1:2 (1 cement hardener mix : 2 graded stone

aggregate 6 mm nominal size) by volume, hardening compound

mixed @ 2 litre per 50 kg of cement or as per manufacturer‟s

specifications. This includes cost of cement slurry, but excluding

the cost of nosing of steps etc. complete. Sqm 535.25 - -

68 11.26 Kota stone slab flooring over 20 mm (average) thick base laid

over and jointed with grey cement slurry mixed with pigment to

match the shade of the slab including rubbing and polishing

complete with base of 1:4 (1 cement :4 coarse sand):

69 11.27 Kota stone slabs 25 mm thick in risers of steps, skirting, dado

and pillars laid on 12 mm (average) thick cement mortar 1:3 (1

cement : 3 coarse sand) and jointed with grey cement slurry

mixed with pigment to match te shade of the slabs, including

rubbing and polishing complete.

70 11.36 Providing and fixing 1st quality ceramic glazed wall tiles

conforming to IS: 15622 (thickness to be specified by the

manufacture of approved make in all colours, shades except

burgundy, bottle green, black of any size as approved by

Engineer-in-charge in skirting. risers of steps and dados over 12

mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand)

and jointing with grey cement slurry @ 3.3kg per sqm including

pointing in white cement mixed with pigment of matching shade

71 11.39 Providing and laying rectified Glazed Ceramic floor tiles of size

300x300 mm or more (thickness to be specified by the

manufacturer), of 1st quality conforming to IS : 15622, of

approved make, in colours White, Ivory, Grey, Fume Red Brown,

laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse

sand), including grouting the joints with white cement and

matching pigments etc., complete.

Sl. No. Ref. Name of Estimate Unit Rate Quantity for BOQ Amount for BOQ

72 11.41 Providing and laying vitrified floor tiles in different sizes

(thickness to be specified by the manufacturer) with water

absorption less than 0.08% and conforming to IS : 15622, of

approved make, in all colours and shades, laid on 20mm thick

cement mortar 1:4 (1 cement : 4 coarse sand), including

grouting the joints with white cement and matching pigments

etc., complete. - -

11.41.2 Supply of Tiles Sqm 913.87 - -

11.41.2 Laying of Tiles Sqm 421.79 - -

11.41.2 Balance work (Final rectification, cleaning, handing over or any

other works required to NBCC/Client to their satisfaction)

73 11.46 Providing and laying Vitrified tiles in different sizes (thickness to

be specified by manufacturer), with water absorption less than

0.08 % and conforming to I.S. 15622, of approved make, in all

colours & shade, in skirting, riser of steps, over 12 mm thick bed

of cement mortar 1:3 (1 cement: 3 coarse sand), including

grouting the joint with white cement & matching pigments etc.

complete. - -

74 11.47 Providing and laying Vitrified tiles in different sizes (thickness to

be specified by the manufacturer), with water absorption less

than 0.08% and conforming to IS: 15622, of approved brand &

manufacturer, in all colours and shade, in skirting, riser of steps,

laid with cement based high polymer modified quick set tile

adhesive (water based) conforming to IS: 15477, in average 6

mm thickness, including grouting of joints (Payment for grouting

of joints to be made separately). - -

75 16.48 Painting road surface marking with adequate nos of coats to

give uniform finish with ready mixed road marking paint

conforming to IS : 164, on bituminous surface in white/yellow

shade, including cleaning the surface of all dirt, scales, oil,

grease and foreign material etc. complete. - -

16.48.1 New work (Two or more coats) Sqm 122.15 13.47 1,645.36

76 16.68 Providing and laying 60mm thick factory made cement concrete

interlocking paver block of M -30 grade made by block making

machine with strong vibratory compaction, of approved size,

design & shape, laid in required colour and pattern over and

including 50mm thick compacted bed of coarse sand, filling the

joints with fine sand etc. all complete as per the direction of

Engineer-in-charge. Sqm 602.20 27.00 16,259.40

77 16.69 Providing and laying at or near ground level factory made kerb

stone of M- 25 grade cement concrete in position to the required

line, level and curvature, jointed with cement mortar 1:3 (1

cement: 3 coarse sand), including making joints with or without

grooves (thickness of joints except at sharp curve shall not to

more than 5mm), including making drainage opening wherever

required complete etc. as per direction of Engineer-in-charge

(length of finished kerb edging shall be measured for payment).

SH: 12, ROOFING - -

78 12.22 Making khurras 45x45 cm with average minimum thickness of 5

cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded

stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m

x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1

cement : 3 coarse sand) and a coat of neat cement, rounding

the edges and making and finishing the outlet complete.

79 12.45 Providing and fixing false ceiling at all height including providing

and fixing of frame work made of special sections, power

pressed from M.S. sheets and galvanized with zinc coating of

120 gms/sqm (both side inclusive) as per IS : 277 and consisting

of angle cleats of size 25 mm wide x 1.6 mm thick with flanges

of 27 mm and 37mm, at 1200 mm centre to centre, one flange

fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long

with 6mm dia bolts, other flange of cleat fixed to the angle - -

12.45.1 hangers

tapered edge required

plain boardwith nuts & bolts

12.45.1 Balance Work (Rectifiaction, Set right the grid channel and

fixing of false ceiling of gypsum board or any other works

required to NBCC / Client at their satisfaction) Sqm 453.55 180.81 82,008.08

12.45.1 Work already executed by the previous agency Sqm 453.55 882.45 400,235.20

SH: 13.0 & 19.0, FINISHING & DRAINAGE - -

80 13.1 12 mm cement plaster of mix : - -

81 13.2 15 mm cement plaster on the rough side of single or half brick

wall of mix: - -

Sl. No. Ref. Name of Estimate Unit Rate Quantity for BOQ Amount for BOQ

82 13.4 12 mm cement plaster of mix: - -

13.4.1 1:4 (1 cement: 4 coarse sand) Sqm 172.30 - -

83 13.5 15 mm cement plaster on rough side of single or half brick wall

13.5.1 1:4 (1 cement: 4 coarse sand) Sqm 200.05 - -

84 13.16 6 mm cement plaster of mix: - -

13.16.1 1:3 (1 cement: 3 fine sand) Sqm 134.70 - -

85 13.22 Extra for plastering exterior walls of height more than 10 m from

ground level for every additional height of 3 m or part thereof.

i) HT more than 10.0m upto 13.0m Sqm 37.95 - -

ii) HT more than 13.0 m upto 16.0m Sqm 75.90 - -

iii) HT more than 16.0m upto 19.0m Sqm 113.85 - -

iv) HT more than 19.0m upto 22.0m Sqm 151.80 - -

v) HT more than 22.0m upto 25.0m Sqm 189.75 - -

86 13.41 Distempering with oil bound washable distemper of approved

brand and manufacture to give an even shade - -

13.41.1 New work (tow or more coats) over and including priming coat

with cement primer.

87 13.43 Applying one coat of water thinnable cement primer of approved

brand and manufacture on wall surface : - -

13.43.1 Water thinnable cement primer Sqm 35.85 25.00 896.25

88 13.45 Finishing walls with textured exterior paint of required shade :

13.45.1 New work (Two or more coats applied @ 3.28 ltr/10 sqm) over

and including priming coat of exterior primer applied @ 2.20kg/

89 13.46 Finishing walls with Acrylic Smooth exterior paint of required

13.46.1 New work (Two or more coat applied @ 1.67 ltr/10 sqm over and

including priming coat of exterior primer applied @ 2.20 kg/ 10

90 13.60 Wall painting with acrylic emulsion paint of approved brand and

manufacture to give an even shade : - -

13.60.1 Two or more coats on new work Sqm 80.50 10,984.42 884,245.89

91 13.61 Painting with synthetic enamel paint of approved brand and

manufacture to give an even shade: - -

13.61.1 Two or more coats on new work Sqm 74.40 196.33 14,606.95

92 13.68 French spirit polishing : - -

13.68.1 Two or more coats on new works including a coat of wood filler

93 13.26 Providing and applying plaster of paris putty of 2 mm thickness

over plastered surface to prepare the surface even and smooth

complete Sqm 110.95 - -

13.26 1 coat putty already done. 2nd coat putty to be done. Sqm 83.21 - -

13.26 Balance work (Final rectification, cleaning, handing over or any

other works required to NBCC/Client to their satisfaction)

94 13.80 Providing and applying white cement based putty of average

thickness 1 mm, of approved brand and manufacturer, over the

plastered wall surface to prepare the surface even and smooth

complete. Sqm 89.65 10.00 896.50

95 19.16 Providing orange colour safety foot rest of minimum 6 mm thick

plastic encapsulated as per IS : 10910, on 12 mm dia steel bar

conforming to IS: 1786, having minimum cross section as 23

mmx25 mm and over all minimum length 263 mm and width as

165 mm with minimum 112 mm space between protruded legs

having 2 mm tread on top surface by ribbing or chequering

besides necessary and adequate anchoring projections on tail

length on 138 mm as per standard drawing and suitable to with

stand the bend test and chemical resistance test as per

specifications and having manufacture‟s permanent identification

mark to be visible even after fixing, including fixing in manholes

with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3

coarse sand : 6 graded stone aggregate 20 mm nominal size)

complete as per design. Each 311.60 24.00 7,478.40

96 19.18 Supplying and fixing C.I. cover without frame for manholes : - -

19.18.1 455 x 610 mm rectangular C.I. cover (light duty) the weight of the

cover to be not less than 23 kg Each 1,222.15 - -

SH: 20.0, PILE WORK - -

Sl. No. Ref. Name of Estimate Unit Rate Quantity for BOQ Amount for BOQ

97 20.2 Boring, providing and installation bored cast-in-situ reinforced

cement concrete piles of grade M-25 of specified diameter and

length below the pile cap, to carry a safe working load not less

than specified, excluding the cost of steel reinforcement but

including the cost of boring with bentonite solution and

temporary casing of appropriate length for setting out and

removal of same and the length of the pile to be embedded in

the pile cap etc. by percussion drilling using Direct mud

circulation (DMC) or Bailer and chisel technique by tripod and

mechanical Winch Machine all complete, including removal of

excavated earth with all its lifts and leads (length of pile for

payment shall be measured up to bottom of pile cap). - -

Note: Truck Mounted rotary/TMR/Tubewell boring mchine

shall not be used . - -

20.2.5 600 mm dia. Piles metre 2,671.00 - -

98 20.6 Vertical load testing of piles in accordance with IS 2911 (Part IV)

including installation of loading platform by Kentledge method

and preparation of pile head or construction of test cap and

dismantling of test cap after test etc. complete as per

specification & the direction of Engineer in-charge.

Note: 1. Initial and Routine Load Test shall not be carried

out by Dynamic method of testing. - -

Note 2: Testing agency shall submit the design of loading

platform for the approval of Engineer-in-charge.

20.6.3 Group of two or more piles upto 50 tonne Safe capacity - -

20.6.3.1 Initial test (Test Load 2.5 times the Safe capacity) Per Test 56,332.80 - -

20.6.3.2 Routine test (Test Load 1.5 times the Safe capacity) Per Test 34,264.20 - -

SH: 21.0, ALUMINIUM WORK - -

99 21.1 Providing and fixing aluminium work for doors, windows,

ventilators and partitions with extruded built up standard tubular

sections/ appropriate Z sections and other sections of approved

make conforming to IS: 733 and IS: 1285, fixing with dash

fasteners of required dia and size, including necessary filling up

the gaps at junctions, i.e. at top, bottom and sides with required

EPDM rubber/ neoprene gasket etc. Aluminium sections shall be

smooth, rust free, straight, mitred and jointed mechanically

wherever required including cleat angle, Aluminium snap

beading for glazing / paneling, C.P. brass / stainless steel

screws, all complete as per architectural drawings and the

directions of Engineer-in-charge. (Glazing, paneling and dash

fasteners to be paid for separately) : - -

21.1.1 For fixed portion - -

21.1.1.2 Powder coated aluminium (minimum thickness of powder

coating 50 micron) Kg 377.75 - -

21.1.1.2 Work already executed by the previous agency Kg 321.09 724.63 232,668.99

21.1.1.2 Balance work (Door frames, window frames available at site,

installation, fixing as per specs or any other works required to be

done for handing over to NBCC/Client to their satisfaction)

100 21.1.2 For shutters of doors, windows & ventilators including providing

and fixing hinges/ pivots and making provision for fixing of

fittings wherever required including the cost of EPDM rubber /

neoprene gasket required (Fittings shall be paid for separately)

21.1.2.2 Powder coated aluminium (minimum thickness of powder

coating 50 micron) Kg 435.75 - -

21.1.2.2 Work already executed by the previous agency Kg 370.39 - -

21.1.2.2 Balance work (Shutters are available at site, installation, fixing

as per specs to be done for handing over to NBCC/Client to

their satisfaction) Kg 65.36 317.53 20,754.55

101 21.3 Providing and fixing glazing in aluminium door, window,

ventilator shutters and partitions etc. with EPDM rubber /

neoprene gasket etc. complete as per the architectural drawings

and the directions of engineer-in-charge. - -

21.3.1 With float glass panes of 4.0 mm thickness Sqm 828.75 65.53 54,307.99

21.3.2 With float glass panes of 5.50 mm thickness Sqm 1,054.20 - -

21.3.2 Work already executed by the previous agency Sqm 896.07 - -

21.3.2 Balance work (Glass panes is available at site

Installation, fixing as per specs or any other works required to be

done for handing over to NBCC/Client to their satisfaction)

102 21.13 Providing and fixing 100mm brass locks (best make of approved

quality) for aluminium doors including necessary cutting and

making good etc. complete. Each 418.65 1.00 418.65

103 21.16 Providing and fixing aluminium round shape handle of outer dia

100 mm with SS screws etc. complete as per direction of

Engineer in-charge - -

Sl. No. Ref. Name of Estimate Unit Rate Quantity for BOQ Amount for BOQ

21.16.2 Powder coated minimum thickness 50 micron aluminium Each 72.60 4.00 290.40

104 21.17 Providing and fixing anodised aluminium grill (anodised

transparent or dyed to required shade according to IS: 1868 with

minimum anodic coating of grade AC 15) of approved

design/pattern, with approved standard section and fixed to the

existing window frame with C.P. brass/ stainless steel screws @

200 mm centre to centre, including cutting the grill to proper

opening size for fixing and operation of handles and fixing

approved anodised aluminium standard section around the

opening, all complete as per requirement and direction of

Engineer-in-charge. (Only weight of grill to be measured for

105 21.18 Providing and fixing 12 mm thick frameless toughened glass

door shutter of approved brand and manufacture, including

providing and fixing top & bottom pivot & spring type fixing

arrangement and making necessary holes etc. for fixing required

door fittings, all complete as per direction of Engineer-in-charge

(Door handle, lock and stopper etc.to be paid separately).

SH: 22.0, WATER PROOFING WORKS - -

106 22.3 Providing and laying water proofing treatment to vertical and

horizontal surfaces of depressed portions of W.C., kitchen and

the like consisting of: - -

i) 1st course of applying cement slurry @ 4.4 kg/sqm mixed with

water prrofing compound conforming to IS 2645 in

recommended proportions including rounding of junction of

vertical and horizontal surface.

ii) 2nd course of 20mm cement plaster 1:3 (1 cement : 3 coarse

sand) mixed with water proofing compound in recommended

proportio nincluding rounding off junction of vertical and

horizontal surface.

iii) 3rd course of applying blown or residual bitumen applied hot

at 1.7 kg. per sqm area.

iv) 4th course of 400 micron thick PVC sheet. (Overlaps at joints

of PVC sheet should be 100 mm wide and pasted to each other Sqm 522.90 - -

already@ 1.7 kg/sqm.)

executed by the previous agency Sqm 496.76 0.00 0.25

22.3 Balance work (Repairing, rectifcation of already installed

waterproofing along with submission of water proofing bond ,or

any other works required for handing over to NBCC/Client to

their satisfaction) Sqm 26.15 443.54 11,596.38

107 22.20 Providing and laying APP (Atactic Polypropylene Polymer)

modified prefabricated five layer 3 mm thick water proofing

membrane, black finished reinforced with non-woven polyester

matt consisting of a coat of bitumen primer for bitumen

membrane @ 0.40 litre/sqm by the same membrane

manufacture of density at 25°C, 0.87-0.89 kg/ litre and viscocity

70-160 cps. Over the primer coat the layer of membrane shall be

laid using Butane Torch and sealing all joints etc, and preparing

the surface complete. The vital physical and chemical

parameters of the membrane shall be as under : Joint strength

in longitudinal and transverse direction at 23°C as 650/

450N/5cm. Tear strength in longitudinal and transverse direction

as 300/250N. Softening point of membrane not less than 150°C.

Cold flexibility shall be upto -2°C when tested in accordance with

ASTM, D - 5147. The laying of membrane shall be got done

through the authorised applicator of the manufacturer of - -

22.20.1 membrane

3 mm thick : Sqm 425.35 - -

22.20.1 Work already executed by the previous agency Sqm 404.08 - -

22.20.1 Balance work (Repairing, rectifcation of already installed

waterproofing along with submission of water proofing bond ,or

any other works required for handing over to NBCC/Client to

their satisfaction) Sqm 21.27 633.27 13,468.07

108 22.21 Extra for covering top of membrane with Geotextile, 120 gsm

non woven, 100% polyester of thickness 1 to 1.25 mm bonded

to the membrane with intermittent touch by heating the

membrane by Butane Torch as per manufactures

recommendation. 74.85 - -

22.21 Work already executed by the previous agency Sqm 71.11 - -

22.21 Balance work (Repairing, rectifcation of already installed

waterproofing along with submission of water proofing bond ,or

any other works required for handing over to NBCC/Client to

their satisfaction) Sqm 3.74 633.27 2,370.01

109 26.7 Designing, fabricating, testing, installing and fixing in position

Curtain Wall with Aluminium Composite Panel Cladding, with

open grooves for linear as well as curvilinear portions of the

building, for all heights and all levels etc. including:

a) Structural analysis & design and preparation of shop drawings

for pressure equalisation or rain screen principle as required,

proper drainage of water to make it watertight including checking

of all the structural and functional design. - -

Sl. No. Ref. Name of Estimate Unit Rate Quantity for BOQ Amount for BOQ

b) Providing, fabricating and supplying and fixing panels of

aluminium composite panel cladding in pan shape in metalic

colour of approved shades made out of 4mm thick aluminium

composite panel material consisting of 3mm thick FR grade

mineral core sandwiched between two Aluminium sheets (each

0.5mm thick). The aluminium composite panel cladding sheet

shall be coil coated, with Kynar 500 based PVDF / Lumiflon

based fluoropolymer resin coating of approved colour and shade

on face # 1 and polymer (Service) coating on face # 2 as

specified using stainless steel screws, nuts, bolts, washers,

cleats, weather silicone sealant, backer rods etc.

c) The fastening brackets of Aluminium alloy 6005 T5 / MS with

Hot Dip Galvanised with serrations and serrated washers to

arrest the wind load movement, fasteners, SS 316 Pins and

anchor bolts of approved make in SS 316, Nylon separators to

prevent bi-metallic contacts all complete required to perform as

per specification and drawing The item includes cost of all

material & labour component, the cost of all mock ups at site,

cost of all samples of the individual components for testing in an

approved laboratory, field tests on the assembled working

curtain wall with aluminium composite panel cladding, cleaning

and protection of the curtain wall with aluminium composite

panel cladding till the handing over of the building for

occupation. Base frame work for ACP cladding is payable under

the relevant aluminium item.s The Contractor shall provide

curtain wall with aluminium composite panel cladding, having all

the performance characteristics all complete , as per the

Architectural drawings, as per item description, as specified, as

per the approved shop drawings and as directed by the Engineer-

in-Charge. However, for the purpose of payment, only the actual

area on the external face of the curtain wall with Aluminum

Composite Panel Cladding (including width of groove) shall be

measured in sqm. up to two decimal places.

PART-II : NON SCHEDULE ITEMS - -

N: NON-SCHEDULE ITEMS - -

110 MR ANTI-TERMITE TREATMENT

Diluting and injecting chemical emulsion for PRE-

CONSTRUCTIONAL Anti-termite treatment and creating a

continous chemical barrier , wall trenches, top surface of plinth

filling, along the external perimeter of building, over the top

surface of consolidated earth of which apron is to be laid,

surroundings of pipes and conduits etc. complete as per

specification. (Plinth area of the building at ground floor only

shall be measured for payment). Chlorpyriphos Emulsifiable

concentrate of 20% with 1% Concentration. i.e. mateiral

chlorpyriphos/ lindane etc complete

111 MR GRC JALI

Providing and fixing Glass Reinforced Concrete (G.R.C)

Screens in approved size, pattern, design, thickness and color of

M/S UniStone make or equivalent. The Screens should be made

from „53 grade‟ White Portland Cement manufactured by „JK

Cement‟ or equivalent, Quartz, Fine Silica Sand, Alkali Resistant

Glass Fiber manufactured by „Saint Gobain‟ or equivalent, Super

Plasticizers manufactured by „BASF‟ or equivalent, Polymers

manufactured by „BASF‟ or equivalent and U.V resistant

Synthetic inorganic pigments should be used for pigmentation

manufactured by „BAYFERROX (Germany)‟ or equivalent. The

material casting should take place in Synthetic Rubber / FRP

Mould manufactured by „Reckli‟ or equivalent. The fixing of

Screens should be „Dry fixing‟ i.e. to be done with Stainless

Steel (SS – 304) „L‟ shaped Clamps, dash fasteners and pins.

etc. complete as per directed by Engineer-in-Charge.

112 MR STRUCTURE GLAZING

Supply & fixing of structural glazing for fixed & Openable (upto

all floors) at Façade using glazing section of which mullion &

transom to be aluminum grade of 63400 WP and ISI 7733 and

ID 1258 section size 112x55x2 mm. (SP 3584) Electro colour

anodized 20 micron or pure polyester powder coated 40 micron

of approved shade and colour using AIS ( Asahi India)- 6mm

thick Toughened single glazed reflective high performance

offline coated AIS (Sunergy-Green) glass or equivalent.having

light transmission minimum 56% solar factor maximum 41%

External reflection 7% , Internal Reflection 10% and U value of

maximum 4.1 W/m2. Glass shall be fixed by sub frame method

on 19x19 x 2 mm Aluminum Square tube with help of 12mm x 6

mm both side rubber spacer & structural silicon of Dow Corning

995 grade. The Weather /water sealing of glass joints shall be

Sl. No. Ref. Name of Estimate Unit Rate Quantity for BOQ Amount for BOQ

MR Work already executed by the previous agency

(Fixing, Repairing , or any other works required to handing over

to client with full completion) Sqm 1,506.15 450.66 678,769.26

MR Balance work

(Fixing, Repairing or any other work required for handing over to

client with full completion handing over to NBCC/Client to their

satisfaction) Sqm 3,916.00 488.16 1,911,650.06

MR Balance work

(Repairing and handing over or any other work required for

handing over to NBCC/Client to their satisfaction) Sqm 602.46 606.44 365,356.74

113 MR HPL Wall Cladding

Supply FunderMax 6mm thick Exterior grade F- Quality panels of

standard size with both side décor. The panels should be

duromer high pressure laminates (HPL) in accordance with

EN438-6 TYPE EDF with Norm Conformity as per EN 438/7.

Installation of FunderMax panels will be done by MBE

Rivets(with Fixed and Sliding Points) with minimum

recommended Aluminum Box section of 38x38x2mm thick and

38x74x2mm thick held by Wind load and Dead load MS

Galvanized brackets as per design, anchored by standard

Hilti/Fischer or equivalent make anchor fasteners along with

Thermal and Bi-Metallic Separator. Installation of FunderMax

Panels will be done using Rear Ventilated Principles only .which

is ensured by providing gaps of 20 mm at top and bottom(for

free flow of air behind the façade) for the façade and using the

framework with no horizontal section. Sqm 10,111.89 5.00 50,559.43

114 MR Providing and fixing Antiskid Heavy duty unglazed vitrified Floor

tiles 300x300mm and 10mm thick laid on 20mm thick cement

mortar 1:4 (1 cement : 4 coarse sand) with Tile Adhesive [3-

4mm thickness] and jointing with Tile Grout as per approved

colour & shade as approved by Engineer-in charge. Sqm 1,188.57 200.00 237,714.09

INTERNAL PLUMBING WORKS - -

SUBHEAD-I (A): SANITARY INSTALLATIONS ( SCHEDULED ITEMS) - -

115 17.20 Providing and fixing white vitreous china pedestal type water

closet (European type W.C. pan) with seat and lid, 10 litre low

level white P.V.C. flushing cistern, including flush pipe, with

manually controlled device (handle lever), conforming to IS :

7231, with all fittings and fixtures complete, including cutting and

making good the walls and floors wherever required :

17.2.1 W.C. pan with ISI marked white solid plastic seat and lid Each 3,317.30 33.00 109,470.90

116 17.70 Providing and fixing wash basin with C.I.brackets, 15 mm C.P.

brass pillar taps, 32 mm C.P. brass waste of standard pattern,

including painting of fittings and brackets, cutting and making

good the walls wherever require : - -

17.7.1 White Vitreous China flat back wash basin size 630 x 450 mm

with a pair of 15 mm C.P. brass pillar taps. Each 2,331.15 41.00 95,577.15

117 8.10 Providing & fixing stone slab table rubbed, edges rounded and

polished of size 75 X 50cm deep and 1.8 cm thick fixed in urinal

patitions by cutting chase of appropriate width with chase cutter

and embedding the stone in chase with epoxy grout or with

cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded

stone aggregste 6mm nominal size) as per Engineer-in-charge

and finished smooth - -

8.10.1 White Agaria Marble Stone sqm 3,263.50 10.00 32,635.00

118 17.80 Providing and fixing white vitreous china battery based infrared

sensor operated urinal of approx. size 610 x 390 x 370 mm

having pre & post flushing with water ( 250 ml & 500 ml

consumption), having water inlet from back side, including fixing

to wall with suitable brackets all as per manufacturers

specification and direction of Engineer-in-charge..

119 17.10 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink

as per IS: 13983 with CI brackets and stainless steel plug 40mm

including painting of fittings and brackets, cutting and making

good the walls wherever required. - -

17.10.1 Kitchen sink with drain board - -

17.10.2 Kitchen Sink without drain board (For JC) - -

120 17.28 Providing & fixing PVC waste pipe for sink or wash basin

including PVC waste fitting Complete - -

17.28.2 Flexible Pipe - -

Sl. No. Ref. Name of Estimate Unit Rate Quantity for BOQ Amount for BOQ

121 17.32 Providing and fixing mirror of superior glass (of approved quality)

and of required shape and size with plastic moulded frame of

approved make and shade with 6 mm thick hard board backing :

17.32.2 Rectangular shape 453x357 mm Each 727.90 41.00 29,843.90

122 17.70 Providing and fixing PTMT Bottle Trap for Wash basin and sink.

17.70.1 Bottle trap 31 mm single piece moulded with height of 270 mm,

effective length of tail pipe 260 mm from the centre of the waste

coupling 77 mm breadth with 25 mm minimum water seal,

weighing not less than 260 gms. Each 494.90 39.00 19,301.10

17.70.2 Bottle trap 38 mm single piece moulded with height of 270 mm,

effective length of tail pipe 260 mm from the centre of the waste

coupling 77 mm breadth with 25 mm minimum water seal,

weighing not less than 260 gms.(sink & urinal) Each 518.15 11.00 5,699.65

123 17.71 Providing and fixing PTMT liquid soap container 109 mm wide,

125 mm high and 112 mm distance from wall of standard shape

with bracket of the same materials with snap fittings of approved

quality and colour weighing not less than 105 gms.

124 17.72 Providing & fixing PTMT towel ring trapezoidal shape 215 mm

long 200 mm wide with minimum distance of 37 mm from wall

face with concealed fittings arrangement of approved quality

and colour weighing not less than 88 gms Each 218.50 39.00 8,521.50

125 18.49 Providing and fixing C.P. brass bib cock of approved quality

confirming to IS:8931 - -

126 18.51 Providing and fixing C.P. brass long body bib cock of approved

quality conforming to IS standards and weighing not less than

18.51.1 15mm nominal bore Each 610.65 7.00 4,274.55

127 18.53 Providing and fixing C.P. brass angle valve for basin mixer and

geyser points of approved quality conforming to IS 8931 a) 15

mm nominal bore. - -

128 17.34 Providing and fixing toilet paper holder : - -

129 18.64 Providing & fixing PTMT swivelling shower, 15mm nominal

bore.weighing not less than 40 gms. Each 141.75 7.00 992.25

130 17.73 Providing and fixing PTMT towel rail complete with brackets

fixed wooden cleats with CP brass screws with concealed fittings

arrangement of approved quality and colour. - -

17.73.2 600 mm long towel rail with total length of 645 mm, width 78 mm

and effective height of 88 mm, weighing not less than 190 gms

SUBHEAD-I(B): SANITARY INSTALLATIONS (NON-SCHEDULED ITEMS) - -

131 MR Supplying, storing, handling, shifting, installation, testing and

commissioning of CP flxible hose, spray, wall flange etc.

complete.(Make: Jaquar Model No- 573 or equivalent)

132 MR Recieving, storing, handling, shifting, installation, testing and

commissioning of C.P. brass shower arm with wall flange.

(Make: Jaquar Model No- SHA 477 or equivalent)

133 MR Supplying, storing, handling, shifting, installation, testing and

commissioning of C.P. head shower set comprising head

shower with ball joint adjustable shower jet. (Make : Jaquar,

Model - OHS 1989 or equivalent) Each 1,428.69 7.00 10,000.86

134 MR Supplying, storing, handling, shifting, installation, testing and

commissioning of Wall Mixer 3-in-1 System with Provision for

both Hand Shower and Overhead Shower Complete with

115mm Long Bend Pipe, Connecting Legs & Wall

Flangeconnection to shower & bath with all accessories of

approved design. (Make: Jaquar Model No.- FUS-29281 or

equivalent) Each 3,997.76 7.00 27,984.34

135 MR Providing and fixing C.P brass central hole basin mixer

complete in respects.(Basin Mixer Jaquar, Model: Florentine,

Sl. No. Ref. Name of Estimate Unit Rate Quantity for BOQ Amount for BOQ

136 MR Providing and fixing 15mm dia C.P. brass wall-mounted central

hole sink mixer with swinging spout of approved make and

quality with all fittings and accessories etc. complete.(Sink

mixer Jaquar mixer Model FLR-5163 Each 3,098.37 2.00 6,196.75

SUBHEAD-II(A): INTERNAL DRAINAGE INSTALLATIONS (SCHEDULED ITEMS) - -

137 17.60 Providing and fixing cast iron trap of self cleansing design with

cast iron screwed down or hinged grating with or without vent

arm complete, including cost of cutting and making good the

walls and floors. - -

17.60.1 100 mm inlet and 100 mm outlet centrifugally cast (spun) iron

17.60.1 Work already executed by the previous agency Each 835.17 - -

17.60.1 Balancework (Repairing, Testing or any other work required to

be done for final hand over to NBCC / Client at their

satisfaction) Each 147.38 49.00 7,221.74

138 12.22 Making khurras 45x45cm with average minimum thickness of 5

cm cement concrete 1:2:4 (1 cement:2 coarse sand: 4 graded

stone aggregate 20 mm nominal size) over PVC sheet 1m x 1m

x 400 micron, finished with 12mm cement plaster 1:3 (1

cement:3 coarse sand) and a coat of neat cement, rounding the

edges, making and finishing the outlet complete

139 12.44 Providing and fixing to the inlet mouth of rain water pipe cast iron

grating 15 cm diameter and weighing not less than 440 grams.

140 17.35 Providing and fixing soil, waste, vent and rain water pipes - -

17.35.1.2 Centrifugally cast (spun) iron socket & spigot (S&S ) pipe as per

17.35.1.2 Work already executed by the previous agency metre 780.09 - -

17.35.1.2 Balance work (Repairing, Testing or any other work required to

be done for final handover to NBCC / Client at their

satisfaction) metre 137.66 657.10 90,458.03

141 17.37 Providing and fixing MS holder bat clamps of approved design to

cast iron (spun) pipe embedded in and Including cement

concrete blocks 10 x10 x10cm of 1:2:4 mix (1 cement : 2 coarse

sand : 4 graded stone aggregate 20mm nominal size) including

cost of cutting holes and making good the walls etc.

17.37.1 For 100mm dia. Pipe Each 152.90 - -

17.37.1 Work already executed by the previous agency Each 129.97 - -

17.37.1 Balance work ( Repairing, Testing or any other work required to

be done for final handover to NBCC / Client at their

satisfaction) Each 22.94 328.55 7,535.29

142 17.38 Providing and fixing bend of required degree with access door,

insertion rubber washer 3mm thick, bolts and nuts complete.

17.38.1.2 Centrifugally cast (spun) iron pipe S&S as per IS-3989 Each 385.70 - -

17.38.1.2 Work already executed by the previous agency Each 327.85 - -

17.38.1.2 Balance work ( Repairing, Testing or any other work required to

be done for final handover to NBCC / Client at their

satisfaction) Each 57.86 41.00 2,372.06

143 17.39 Providing and fixing plain bend of required degree. - -

17.39.1.2 Sand cast iron S&S as per IS : 3989 Each 335.75 - -

17.39.1.2 Work already executed by the previous agency Each 285.39 - -

17.39.1.2 Balance work ( Repairing, Testing or any other work required to

be done for final handover to NBCC / Client at their

satisfaction) Each 50.36 86.00 4,331.18

144 17.40.1.2 Providing and fixing heel rest sanitary bend, in 100mm

Centrifugally cast (spun) iron pipe S&S as per IS-3989 Each 371.75 - -

17.40.1.2 Work already executed by the previous agency Each 315.99 - -

17.40.1.2 Balance work ( Repairing, Testing or any other work required to

be done for final handover to NBCC / Client at their

satisfaction) Each 55.76 49.00 2,732.36

145 17.42 Providing and fixing double equal plain junction of required

17.42.1.2 Sand cast iron S&S as per IS - 3989 Each 748.10 49.00 36,656.90

146 17.43 Providing and fixing single equal plain junction of reqd. degree

with access door, insertion rubber washer 3mm thick, bolts and

nuts complete. - -

17.43.1.2 Sand cast (spun) iron S&S as per IS-3989 Each 623.80 66.00 41,170.80

147 17.44 Providing and fixing single equal plain junction of required

17.44.1.2 Sand cast iron S&S as per IS - 3989 Each 576.20 - -

Sl. No. Ref. Name of Estimate Unit Rate Quantity for BOQ Amount for BOQ

17.44.1.2 Work already executed by the previous agency Each 489.77 - -

17.44.1.2 Balance work ( Repairing, Testing or any other work required to

be done for final handover to NBCC / Client at their

satisfaction) Each 86.43 72.00 6,222.96

148 17.48 Providing and fixing single unequal plain junction of required

17.48.1.2 Sand cast iron S&S as per IS -3989 Each 690.00 20.00 13,800.00

149 17.55 Providing and fixing door piece, insertion rubber washer 3mm

thick, bolts & nuts complete : - -

17.55.1.2 Sand cast iron S&S as per IS: 3989 Each 513.45 15.00 7,701.75

150 17.56 Providing and fixing terminal guard: - -

17.56.1.2 Sand cast iron S&S as per IS - 3989 Each 434.50 7.00 3,041.50

151 17.57 Providing and fixing collar. - -

17.57.1.2 Sand (Centrifugally) cast (spun) iron pipe S&S as per IS-3989

152 17.65 Painting sand cast iron / centrifugally cast iron( spun) iron soil,

waste and vent pipes and fittings with two coats of synthetic

enamel paint of any colour such as chocolate, grey or buff etc.

over a coat of primer (of approval quality) for new work

17.65.1 100mm dia cast (spun) iron S&S pipe metre 38.65 - -

17.65.1 Work already executed by the previous agency metre 32.85 - -

17.65.1 Balance work ( Repairing, Testing or any other work required to

be done for final handover to NBCC / Client at their

satisfaction) metre 5.80 657.10 3,809.54

153 18.28 Providing lead caulked joints to spun iron or C.I. pipes and

specials, including testing of joints but excluding the cost of pig

18.28.1 100 & 150 mm diameter pipe Each 204.85 - -

18.28.1 Work already executed by the previous agency Each 174.12 - -

18.28.1 Balance work ( Repairing, Testing or any other work required to

be done for final handover to NBCC / Client at their

satisfaction) Each 30.73 650.00 19,972.88

154 18.58 Providing and fixing PTMT grating of approved quality and

18.58.1 Circular type - -

18.58.1.1 100 mm nominal dia Each 49.25 - -

18.58.1.1 Work already executed by the previous agency Each 41.86 2.00 83.72

18.58.1.1 Balance work ( Repairing, Testing or any other work required to

be done for final handover to NBCC / Client at their

satisfaction) Each 7.39 51.00 376.76

155 19.20 Providing and laying cement concrete 1:5:10 (1 cement: 5

coarse sand: 10 graded stone aggregate 40 mm nominal size)

all-round SW pipes including bed concrete as per standard

19.2.1 100mm diameter S.W. pipe metre 592.60 50.00 29,630.00

156 18.10 Providing and fixing G.I. Pipes complete with G.I. Fittings and

clamps. including cutting and making good the walls etc.

required for waste connection from W.B., A.S.P., Sump Rising

main etc. Complete.

Internal work -Exposed on wall - -

18.10.5 40 mm dia nominal bore metre 425.65 - -

18.10.5 Work already executed by the previous agency metre 361.80 - -

18.10.5 Balance work ( Repairing, Testing or any other work required to

be done for final handover to NBCC / Client at their

satisfaction) metre 63.85 151.07 9,645.44

18.10.6 50 mm dia nominal bore metre 527.20 5.00 2,636.00

157 18.40 Painting G.I. Pipes and fittings with two coats of anticorrosive

bitumastic paint of approved quality - -

18.40.5 40 mm diametre pipe metre 11.85 - -

18.40.6 50 mm diametre pipe metre 14.15 60.00 849.00

158 12.41 Providing & fixing on wall face unplasticised -Rigid PVC rain

water pipes conforming to IS:13592 Tyape A including jointing

with seal ring conforning to IS:5382 leaving 10 mm gap for

thermal expansion. (i) Single socketed pipes. - -

12.41.2 110 mm diameter metre 231.65 - -

12.41.2 Work already executed by the previous agency metre 196.90 - -

12.41.2 Balance work ( Repairing, Testing or any other work required to

be done for final handover to NBCC / Client at their

satisfaction) metre 34.75 482.56 16,767.75

Sl. No. Ref. Name of Estimate Unit Rate Quantity for BOQ Amount for BOQ

12.42. Providing, fixing on wall face unplasticised - PVC moulded

fittings /accessories for unplasticised - Rigid PVC rain water

pipes conforming to IS ; 13592 Type A including jointing with

seal ring conforming to IS ; 5382 leaving 10 mm gap for thermal

expansion. - -

12.42.1.2 Coupler -110 mm diameter Each 138.30 - -

12.42.5.2 Bend -87.5 deg -110 mm diameter Each 161.55 - -

12.42.6.2 Shoe -110mm shoe Each 295.10 - -

159 12.43 Providing & fixing unplasticised - PVC pipe clips of approved

design to unplasticised - PVC rain water pipes by means of

50x50x50mm hard wood plugs, screwed with .M.S. screws of

required length including cutting brick work and fixing in cement

mortar 1:4(1cement : 4 coarse sand) and making good the wall

etc. complete. - -

12.43.2 Work already executed by the previous agency Each 160.69 - -

12.43.2 Balance work ( Repairing, Testing or any other work required to

be done for final handover to NBCC / Client at their

satisfaction) Each 28.36 241.28 6,842.10

SUBHEAD-II(B): INTERNAL DRAINAGE INSTALLATIONS (NON-SCHEDULED ITEMS) - -

160 M.R. Providing and fixing G.I. Inlet fitting of suitable size with 2 & 3

Nos. G.I. Socket 32 & 40 welded G.I. pipe and dipped in hot

bitumen complete in all respect. - -

100 mm diameter pipe (Hopper ) Each 993.20 - -

161 M.R Providing and fixing floor drain & balcony drain made of 100 x 50

dia elbow / tee as applicable connected with 50 dia GI pipe

painted with primer, two coats of black bituminastic

paint,wrapping 1 mm thick PVC tape and final coat of black

bituminastic paint B109 complete in all complete including

cutting and making good the walls and floor wherever required

162 M.R. Providing and fixing 100mm diameter C.P. Brass cleanout plug

with M.S. flanged tail pieces, 6mm dia nut & bolts, gasket and

washers fixed to C.I. Pipe with drip seal joint complete in all

complete including cutting and making good the walls and floor

wherever required. - -

with 100 mm dia. Pipe Each 1,210.95 3.00 3,632.84

SUBHEAD-III(A): WATER SUPPLY INSTALLATIONS (SCHEDULED ITEMS) - -

163 17.30 Providing and fixing in position 25 mm diameter mosquito proof

coupling of approved municipal design. Each 38.60 2.00 77.20

164 18.70 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC)

pipes having thermal stability for hot and cold water supply

including all CPVC plain and brass threaded fittings including

fixing the pipe with clamps at 1.00 mt spacing. this includes

jointing of pipes and fittings with one step CPVC solvent cement

and testing of joints complete as per direction of engineer in

Internal work -Exposed on Wall - -

18.7.1 15 mm nominal outer dia pipes metre 163.50 5.00 817.50

18.7.2 20 mm nominal outer dia pipes metre 190.55 101.36 19,314.15

18.7.3 25 mm nominal outer dia pipes metre 231.30 43.40 10,038.42

18.7.4 32 mm nominal outer dia pipes metre 296.70 3.20 949.44

18.7.5 40 mm nominal outer dia pipes metre 407.90 - -

18.7.6 50 mm nominal outer dia pipes metre 581.55 10.00 5,815.50

165 18.80 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC)

pipes having thermal stability for hot and cold water supply

including all CPVC plain and brass threaded fittings including

fixing the pipe with clamps at 1.00 mt spacing. this includes

jointing of pipes and fittings with one step CPVC solvent cement

and the cost of cutting chases and making good the wall same

including testing of joints complete as per the direction of

engineer incharge - -

Concealed work including cutting chases and making good the

wall etc. - -

18.8.1 15 mm nominal outer dia pipes metre 270.00 25.00 6,750.00

18.8.2 20 mm nominal outer dia pipes metre 296.40 - -

18.8.3 25 mm nominal outer dia pipes metre 351.30 37.00 12,998.10

18.8.4 32 mm nominal outer dia pipes metre 422.40 30.00 12,672.00

166 18.10 Providing and fixing G.I. pipes complete with GI fittings and

clamps including cutting and making good the walls etc. (internal

work) exposed on wall. - -

Internal work-Exposed on wall - -

18.10.1 15 mm dia, nominal bore metre 215.10 2.00 430.20

18.10.2 20 mm dia, nominal bore metre 249.30 2.00 498.60

18.10.3 25 mm dia, nominal bore metre 304.15 5.00 1,520.75

18.10.4 32 mm dia, nominal bore metre 343.20 5.00 1,716.00

Sl. No. Ref. Name of Estimate Unit Rate Quantity for BOQ Amount for BOQ

18.10.5 40 mm dia, nominal bore metre 425.65 - -

18.10.6 50 mm dia, nominal bore metre 527.20 - -

167 Providing and fixing G.I. pipes complete with GI fittingsincluding

trenching and refilling etc. External Work:

18.12.7 65 mm dia, nominal bore metre 524.25 54.20 28,414.35

168 18.40 Painting GI pipes and fittings with two coats of anti corrosive

bitumastic paint of approved quality - -

18.40.1 15 mm dia, nominal bore metre 5.80 2.00 11.60

18.40.2 20 mm dia, nominal bore metre 6.85 2.00 13.70

18.40.3 25 mm dia, nominal bore metre 8.75 5.00 43.75

18.40.4 32 mm dia, nominal bore metre 10.40 5.00 52.00

18.40.5 40 mm dia, nominal bore metre 11.85 - -

18.40.6 50 mm dia, nominal bore metre 14.15 - -

18.40.7 65 mm dia, nominal bore metre 17.45 14.20 247.79

169 18.17 Providing and fixing of gun metal gate valve with CI wheel of

approved quality (screwed ends) - -

18.17.1 25mm dia, nominal bore Each 428.85 - -

18.17.2 32 mm dia, nominal bore Each 501.50 - -

18.17.3 40 mm dia, nominal bore Each 585.50 - -

18.17.4 50 mm dia, nominal bore Each 750.75 - -

170 18.19 Providing and fixing gun metal non- return valve of approved

quality (Screwed end) (PN 1.6) - -

18.19.5.2 65 nominal bore (Vertical) Each 2,025.15 - -

171 18.16.2 Providing and fixing brass stop cock of approved quality : 20mm

nominal bore Each 344.85 25.00 8,621.25

172 10.20 Structual steel work riveted, bolted or welded in built up

sections, trusses and framed work including cutting, hoisting,

fixing in position and applying a priming coat of approved steel

primer all complete.

173 18.46 Providing and fixing G.I. union in G.I. pipe including cutting and

threading the pipe and making long screws etc. complete (new

18.46.1 15mm nominal bore Each 165.25 2.00 330.50

18.46.2 20mm nominal bore Each 188.50 1.00 188.50

18.46.3 25mm nominal bore Each 200.10 2.00 400.20

18.46.4 32mm nominal bore Each 240.75 2.00 481.50

18.46.5 40mm nominal bore Each 316.25 1.00 316.25

18.46.6 50mm nominal bore Each 392.40 - -

174 18.48 Providing and placing on terrace (at all floor levels) polyethylene

water storage tank, ISI : 12701 marked, with cover and suitable

locking arrangement and making necessary holes for inlet, outlet

and overflow pipes but without fittings and the base support for

175 18.33.1 Constructing masonry chamber 60x60x75 cm, inside with 75

class designation brick work in cement mortar 1:4 (1 cement:4

fine sand) for sluice valve, with C.I. surface box 100mm, to

diameter, 160mm bottom diameter and 180mm deep (inside)

with chained lid and RCC top slab 1:2:4 mix (1 cement : 2

corase sand: 4 graded stonr aggregate 20mm nominal size)

necessary excavation, foundation concret 1:5:10 (1 cement:5

fine sand : 10 graded stone aggregate 40 mm nominal size) and

inside plastering with cement mortor 1:3 (1 cement : 3 coarse

sand) 12 mm thick finished with a floating coat of neat cement

complete as per standard design. : With common burnt clay

F.P.S (non modular) bricks of class designation 7.5

176 16.23 Supplying and fixing of following thickness duly laminated

aluminum foil of mat finish closed cell Nitrile rubber (class “O”)

insulation on existing duct after applying two coats of cold setting

adhesive (CPRX compound). The joints shall sealed with 50 mm

wide and 3 mm thick self adhesive nitrile rubber tape insulation

complete as per specifications and as required.

ELECT. 19 mm thick

Sl. No. Ref. Name of Estimate Unit Rate Quantity for BOQ Amount for BOQ

ELECT. 25 mm thick

177 ELECT. Providing, laying and fixing following dia GI pipes (medium

DSR 2014 class) conferming to IS 1239 with GI fittings including cutting

/ 14.13.3 hole chase painted with primer, two coats of enamel paints etc

178 16.7.1 BUTTERFLY VALVE (MANUAL) with C I body SS Disc, Nitrile

Rubber Seal & O- Ring PN 16 pressure rating for chilled

water/hot eater circulation as specified - -

ELECT. 65 nominal bore

ELECT. 80 nominal bore

179 M.R. Providing and fixing brass ball valve with SS 304 Stem and ball,

teflon seat complete (PN-16). - -

M.R. 15 mm dia nominal bore Each 333.08 2.00 666.15

M.R. 20 mm dia nominal bore Each 464.76 11.00 5,112.32

M.R. 25 mm dia nominal bore Each 725.54 10.00 7,255.36

180 Providing, fixing, testing and commissioning of motorised

butterfly valve of following dia for filling of overhead water tank

complete with high and low level control switches to control

tanks. The level controllers shall be installed in iverhead tanks.

The level switch will close the valve when water level is high in

overhead tank and open the valve when overhead water tank

level is low. The system should be complete in all respects with

accessories 220 V AC / 2 V DC, IP67 electrical water level

control unit, copper control wiring in whether proof casing etc.

M.R. 50 mm dia NB Float Valve Set 37,234.72 1.00 37,234.72

181 M.R. Providing & fixing schedule puddle flanges made of heavy class

M.S. pipe minimum 700 mm long, both side threading upto 50

mm dia pipe and one side threaded and other side flanged for

63dia and above sizes with epoxy coating. M.S. Plate 230 x 230

x 6 mm shall be used for pipe size upto 50 mm dia, 300 x 300 x

6 mm M.S. plate shall be used upto 80 mm dia pipe, 400 x 400 x

6 mm M.S. plate shall be used upto 250 mm dia pipe, 450 x 450

x 6 mm M.S. plate shall be used upto 350 mm dia pipe. (Length

of pipe shall be increase in some cases).

25 mm dia nominal bore Each 427.75 8.00 3,421.98

50 mm dia nominal bore Each 578.47 2.00 1,156.95

65 mm dia nominal bore Each 667.23 2.00 1,334.47

80 mm dia nominal bore Each 746.23 2.00 1,492.45

100 mm dia nominal bore Each 959.55 6.00 5,757.29

150 mm dia nominal bore Each 1,269.52 2.00 2,539.05

ELEC M.R. Solar Water Heaters - -

182 Providing, fixing, testing and commissioning of solar water

heater panels with automatic thermostatic control, pressure

release valve, storage tank complete including cutting and

making good the floors / walls wherever required. - -

Capacity : 600 LPD with SS storage tank with re-circulating

pumps of 600 litres with proper insulation, electrical element and

control panel including all interconnecting SS 304 piping and

INTERNAL & EXTERNAL ELECTRICAL WORKS - -

SUBHEAD A : INTERNAL ELECTRICAL INSTALLATIONS

( SCHEDULE ITEMS) - -

Wiring in PVC Conduit - -

Point wiring in pvc conduit, with modular type switch. - -

183 1.10 Wiring for light point/ fan point/ exhaust fan point/ call bell point

with 1.5 sq.mm FRLS PVC insulated copper conductor single

core cable in surface / recessed medium class PVC conduit,

with modular switch, modular plate, suitable GI box and earthing

the point with 1.5 sq.mm. FRLS PVC insulated copper conductor

single core cable etc as required. - -

Sl. No. Ref. Name of Estimate Unit Rate Quantity for BOQ Amount for BOQ

1.10.3 Balance work (Testing and commission or any other work

required of already installed item for final handover to NBCC /

Client at their satisfaction) Points 359.00 410.00 147,190.00

184 1.11 Wiring for twin control light point with 1.5 sq.mm FRLS PVC

insulated copper conductor single core cable in surface /

recessed medium class PVC conduit, 2 way modular switch,

modular plate, suitable GI box and earthing the point with 1.5

sq.mm. FRLS PVC insulated copper conductor single core cable

etc as required.

TV & TELEPHONE - -

185 1.18 Supplying and drawing following pair 0.5 sq mm FRLS PVC

insulated annealed copper conductor, unarmored telephone

cable in the existing surface/ recessed steel/ PVC conduit as

required. - -

1.18.3 Balance work (Testing and commission or any other work

required of already installed item for final handover to NBCC /

Client at their satisfaction) Metre 8.10 1,465.00 810.00

186 1.19 Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm

solid copper conductor PE insulated, shielded with fine tinned

copper braid and protected with PVC sheath in the existing

surface/ recessed steel/ PVC conduit as required. Metre 28.00 - -

1.19 Balance work (Testing and commission or any other work

required of already installed item for final handover to NBCC /

Client at their satisfaction) Metre 8.40 297.00 2,494.80

187 1.24 Supplying and fixing following modular switch/ socket on the

existing modular plate & switch box including connections but

excluding modular plate etc. as required. quivalent) - -

1.24.6 Telephone socket outlet Each 95.00 66.00 6,270.00

1.24.7 TV antenna socket outlet Each 94.00 5.00 470.00

Power plug wiring in pvc conduit - -

188 1.12 Wiring for light/ power plug with 2X4 sq. mm FRLS PVC

insulated copper conductor single core cable in surface/

recessed medium class PVC conduit alongwith 1 No 4 sq. mm

FR PVC insulated copper conductor single core cable for loop

earthing as required (cable having Low Leakage Current -

0.01mA, ROHS Compliant).

1.12 Balance work (Testing commissiong and mending good to

damages or any other works required in proper satisfactory

working condition as per EIC. for final handover to NBCC /

Client at their satisfaction) Meter 16.20 2,919.40 47,294.28

189 1.13 Wiring for light/ power plug with 4X4 sq. mm FRLS PVC

insulated copper conductor single core cable in surface/

recessed medium class PVC conduit alongwith 2 Nos 4 sq. mm

FRLS PVC insulated copper conductor single core cable for loop

earthing as required. (cable having Low Leakage Current -

0.01mA, ROHS Compliant) Meter 275.00 30.00 8,250.00

190 1.14.4 Wiring for 20 Amp power plug point with 2 x 6.0 sq.mm FRLS

PVC insulated stranded copper conductor wire in surface /

recessed PVC conduit, along with 1 No. 6.0 sq.mm FRLS PVC

insulated copper conductor single core cable for loop earthing as

required.(cable having Low Leakage Current - 0.01mA, ROHS

Compliant) Meter 221.00 60.00 13,260.00

Circuit/Submain wiring in pvc conduit - -

191 1.14 Wiring for circuit/ submain wiring alongwith earth wire with the

following sizes of FRLS PVC insulated copper conductor, single

core cable in surface/ recessed medium class PVC conduit as

required. (All wires have Low Leakage Current - 0.01mA, ROHS

Compliant, Anti Termite and Anti Rodent.)

1.14.1 Balance work (Proper testing ,commissioning and handingover

or any other works required in proper staisfatory working

condition of EIC for final handover to NBCC / Client at their

satisfaction) Metre 31.80 41.00 1,303.80

1.14.2 Balance work (Proper testing ,commissioning and handingover

or any other works required in proper staisfatory working

condition of EIC for final handover to NBCC / Client at their

satisfaction) Metre 39.30 4,135.00 162,505.50

1.14.9 4 X 6 sq. mm + 2 X 6 sq. mm earth wire Metre 389.00 30.00 11,670.00

1.14.10 Balance work (Proper testing ,commissioning and handingover

or any other works required in proper staisfatory working

condition of EIC for final handover to NBCC / Client at their

satisfaction) Metre 179.10 129.80 23,247.18

Sl. No. Ref. Name of Estimate Unit Rate Quantity for BOQ Amount for BOQ

#REF! Balance work (Proper testing ,commissioning and handingover

or any other works required in proper staisfatory working

condition of EIC for final handover to NBCC / Client at their

satisfaction) Metre 264.90 119.30 31,602.57

192 1.20 Supplying and fixing of following sizes of steel conduit along with

accessories in surface/recess including painting in case of

surface conduit, or cutting the wall and making good the same in

case of recessed conduit as required. - -

193 1.21 Supplying and fixing of following sizes of medium class PVC

conduit along with accessories in surface/recess including

cutting the wall and making good the same in case of recessed

conduit as required. - -

#REF! Balance work (Proper testing ,commissioning and handingover

or any other works required in proper staisfatory working

condition of EIC for final handover to NBCC / Client at their

satisfaction) Metre 15.90 714.40 11,358.96

1.21.2 Work already executed by the previous agency

1.21.2 Balance work (Proper testing ,commissioning and handingover

or any other works required in proper staisfatory working

condition of EIC for final handover to NBCC / Client at their

satisfaction) Metre 19.50 1,304.70 25,441.65

Switch & Socket - -

194 1.24.1 Supply and fixing 6 Amps single pole modular type switch one

way on the existing modular plate & sheet steel box including

connections etc. as required. Nos. 81.00 - -

195 1.24.8 Supply and fixing bell push modular type switch . Socket on the

existing modular plate & sheet steel box including connections

etc. as required. Nos. 111.00 - -

196 1.31 Supplying and fixing suitable size GI box with modular plate and

cover in front on surface or in recess, including providing and

fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps

modular switch, connection etc. as required as per

havells/Schneider. (For light plugs to be used in non residential

buildings & Switch have 2 Lakh operations guaranteed).

197 1.32 Supplying and Fixing suitable size GI box with modular plate and

cover in front on surface or in recess, including providing and

fixing 6 pin 16 A & 16 A modular socket outlet and 16 A modular

switch, connection etc as required as per

havells/Schneider/crabtree. (Switch have 2 Lakh operations

198 2.18 Supplying and fixing 20 amps, 240 volts, SPN industrial type,

socket outlet, with 2 pole and earth, metal enclosed plug top

alongwith 20 amps “C” curve, SP, MCB, in sheet steel

enclosure, on surface or in recess, with chained metal cover for

the socket out let and complete with connections, testing and

commissioning etc. as required as per havells/ Schneider/

crabtree. Each 954.00 3.00 2,862.00

199 2.20 Supplying and fixing 30 amps, 415 volts, TPN industrial type,

socket outlet, with 4 pole and earth, metal enclosed plug top

alongwith 30 amps “C” curve, TPMCB, in sheet steel enclosure,

on surface or in recess, with chained metal cover for the socket

out let and complete with connections, testing and

commissioning etc. as required. as per

havells/Schneider/crabtree. 2,473.00 1.00 2,473.00

Light Fixtures & Fans - -

S/F modular type electronic fan regulator: - -

200 1.25 Supplying and fixing stepped type electronic fan regulator on the

existing modular plate switch box including connections but

excluding modular plate etc. as required. Nos. 284.00 175.00 49,700.00

ITC Ceiling fan with cover on fan box: - -

201 1.45 Installation, testing and commissioning of ceiling fan, including

wiring the down rods of standard length (upto 30 cm) with 1.5 sq.

mm FRLS PVC insulated, copper conductor, single core cable,

including providing and fixing phenolic laminated sheet cover on

the fan box etc. as required.

ITC exhaust fan upto 450 mm sweep: - -

202 1.50 Installation of exhaust fan upto 450 mm sweep in the existing

opening, including making the hole to suit the size of the above

fan, making good the damage, connection, testing,

commissioning etc. as required. Nos. 204.00 33.00 6,732.00

Fixing louvers / shutters for exhaust fan: - -

Sl. No. Ref. Name of Estimate Unit Rate Quantity for BOQ Amount for BOQ

203 1.51 Extra for fixing the louvers/ shutters complete with frame for

exhaust fan of all sizes. Nos. 90.00 33.00 2,970.00

Extra down GI pipe 15mm dia: - -

204 1.47 Supplying and fixing extra down rod of 10 cm length G.I. pipe, 15

mm dia, heavy gauge including painting etc. as required. (Note:

More than 5 cm length shall be rounded to the nearest 10 cm

and 5 cm or less shall be ignored). Nos. 23.00 30.00 690.00

Main & Sub-Distribution Boards - -

205 2.7 Supplying and fixing following way, single pole and neutral,

prewired, sheet steel, MCB distribution board, 240 volts, on

surface/ recess, complete with loose wire box, terminal blocks,

duly prewired with suitable size FRLS PVC insulatoed copper

conductor up to terminal blocks, tinned copper busbar, neutral

link, earth bar, din bar, detachable gland plate, interconnections,

phosphatized and powder painted including earthing etc. as

required (But without MCB/ RCCB/ isolator) (make-havells/

siemens/ crabtree) (DB have Removable Main busbar/ Pan

Assembly in SPN/TPN Distribution Board to aid installation,

Main earth stud allows earth to be terminated inside or outside

2.7.4 2 + 4 way / 6 way, Double door Each 2,508.00 - -

2.7.4 Balance work (Testing commissiong and mending good to

damages or any other works as required in proper satisfactory

working condition as per Standard . for final handover to NBCC

/ Client at their satisfaction.) Each 752.40 3.00 2,257.20

2.7.6 Balance work (Testing commissiong and mending good to

damages or any other works as required in proper satisfactory

working condition as per Standard . for final handover to NBCC

/ Client at their satisfaction.) Each 1,083.90 3.00 3,251.70

206 2.8 Supplying and fixing following way prewired TP&N MCB

distribution board of steel sheet for 415 volts on surface/ recess

complete with loose wire box, terminal connectors for all

incoming and outgoing circuits, duly prewired with suitable size

FR PVC insulated copper conductor up to terminal blocks,

tinned copper bus bar, neutral link, earth bar, din bar, detachable

gland plate, interconnections, powder painted including earthing

etc. as required.(But without MCB/ RCCB/ Isolator) (make-

havells/ siemens/ crabtree) (DB have Removable Main busbar/

Pan Assembly in SPN/TPN Distribution Board to aid installation,

Main earth stud allows earth to be terminated inside or outside

2.8.6 Balance work (Testing commissiong and mending good to

damages or any other works as required in proper satisfactory

working condition as per Standard . for final handover to NBCC

/ Client at their satisfaction.) No. 2,848.80 22.00 62,673.60

2.8.7 Balance work (Testing commissiong and mending good to

damages or any other works as required in proper satisfactory

working condition as per Standard . for final handover to NBCC

/ Client at their satisfaction.) No. 3,121.50 1.00 3,121.50

2.8.8 Balance work (Testing commissiong and mending good to

damages or any other works as required in proper satisfactory

working condition as per Standard . for final handover to NBCC

/ Client at their satisfaction.) No. 3,834.60 1.00 3,834.60

207 2.14 Supplying and fixing following rating, double pole, (single phase

and neutral), 240 volts, residual current circuit breaker (RCCB),

having a sensitivity current upto 300 milliamperes in the existing

MCB DB complete with connections, testing and commissioning

etc. as required. - -

208 2.15 Supplying and fixing following rating, four pole, (three phase and

neutral), 415 volts, residual current circuit breaker (RCCB),

having a sensitivity current upto 300 milliamperes in the existing

MCB DB complete with connections, testing and commissioning

etc. as required. - -

209 2.13 Supplying and fixing following rating, four pole, 415 volts, isolator

in the existing MCB DB complete with connections, testing and

commissioning etc. as required. - -

210 2.10 Supplying and fixing 5 amps to 32 amps rating, 240/415 volts,

"C" curve, miniature circuit breaker suitable for inductive load of

following poles in the existing MCB DB complete with

connections, testing and commissioning etc. as required.

Sl. No. Ref. Name of Estimate Unit Rate Quantity for BOQ Amount for BOQ

211 2.11 Supplying and fixing single pole blanking plate in the existing

MCB DB complete etc. as required. each 7.00 50.00 350.00

Cable, Cable Tray & Cable management - -

212 9.1 Supplying and making end termination with brass compression

gland and aluminum lugs for following size of PVC insulated and

PVC sheathed/ XLPE aluminum conductor cable of 1.1 KV

grade as required. - -

213 4.1 Supplying and installing Following size of perforated pre-painted

M.S. cable trays with all accessories perforation not more than

17.5%, in convenient sections, joined with connectors,

suspended from the ceiling with M.S. suspenders including bolts

& nuts, painting suspenders etc as required. - -

4.1.2 150 mm width X 50 mm depth X 1.6 mm thickness #REF! 520.00 - -

4.1.8 300 mm width X 62.5 mm depth X 2.0 mm thickness Metre 878.00 90.00 79,020.00

4.1.14 600 mm width X 75 mm depth X 2.0 mm thickness Metre 1,493.00 45.00 67,185.00

214 1.1.13 900 mm width X 75 mm depth X 2.0 mm thickness Metre 2,038.00 - -

215 10.4 Supplying and making INDOOR cable end termination with heat

shrinkable jointing kit complete with all asccessories including

lugs suitable for following size of 3 core, XLPE aluminium

conductor cable of 11 KV grade as required: - -

Earthing & Lightning Conductor - -

216 5.10 Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia

G.I. pipe from earth electrode including connection with brass

nut, bolt, spring, washer excavation and re-filling etc. as

217 5.11 Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I.

pipe FRLS from earth electrode including

connection/terminating with G.I. nut, bolt, spring, washer

excavation and re-filling etc. as required. RM 421.00 300.00 126,300.00

218 5.15 Providing and fixing 25 x 5 mm GI strip on surface or in recess

for connections etc. complete as required . RM 142.00 200.00 28,400.00

219 5.14 Providing and fixing 25 x 5 mm Copper strip on surface or in

recess for connections etc. complete.. RM 856.00 100.00 85,600.00

220 5.7 Supplying and laying 6 SWG G.I. wire at 0.50 metre below

ground level for conductor earth electrode, including connection/

termination with GI thimble etc. as required. RM 27.00 410.00 11,070.00

INTERNAL ELECTRICAL INSTALLATIONS (NON

SCHEDULED ITEMS) - -

Wiring in PVC Conduit - -

221 MR wiring for SP MCB controlled light points/ fan point with 2 x 1.5

sq.mm FR PVC insulated stranded copper conductor wire in

surface / recessed pvc conduit, along with 1 No. 1.5 sq.mm FR

PVC insulated copper conductor single core cable single core

cable having Low Leakage Current - 0.01mA, ROHS Compliant,

Anti Termite and Anti Rodent for loop earthing as required. (mcb

cost are not include in that item)

222 MR Wiring for secondary/loop light point controlled by switch wihich

having garanted 2 lakh operations with 2 x 1.5 sq.mm FR PVC

insulated stranded copper conductor wire in surface / recessed

pvc conduit, along with 1.5 sq.mm FR PVC insulated copper

conductor single core cable single core cable having Low

Leakage Current - 0.01mA, ROHS Compliant, Anti Termite and

Anti Rodent for loop earthing as required.

Points 482.74 - -

Work already executed by the previous agency Points 96.55 - -

Balance work (Testing commissiong and mending good to

damages or any other works as required in proper satisfactory

working condition as per Standard.) Points 193.10 - -

Balance work (Testing commissiong and mending good to

damages or any other works as required in proper satisfactory

working condition as per Standard. for final handover to NBCC

/ Client at their satisfaction) Points 193.10 514.00 99,252.12

Switch & Socket - -

223 MR Supplying and fixing suitable size GI box with modular plate and

cover in front on surface or in recess, including providing and

fixing 2 nos 3 pin 6 A modular socket outlet with shutter & 1

nos 16 A modular switch, connection etc as required Switch

have 2 Lakh operations guaranteed as per

havells/Schneider/crabtree. Each 441.36 10.00 4,413.63

Light Fixtures & Fans - -

224 MR Supply, installation, testing and commissioning of 36W LED

600x600 mm fixture with complete as required and as per Bajaj

Cat No BZRSQL 36W GIII WH or equivalent. Each 5,732.85 180.00 1,031,913.25

Sl. No. Ref. Name of Estimate Unit Rate Quantity for BOQ Amount for BOQ

225 MR Supply, installation, testing and commissioning of 20-28W

recessed LED Linear light fixture suitable for Techzone false

ceiling as per Bajaj Cat No BPTXn 20W LED 4F NW or

equivalent. Each 5,939.75 - -

226 MR Supply, installation, testing and commissioning of 12W LED

downlight fixture complete as required and as per Bajaj cat no

BGSLO Sleek 12W WH RD or equivalent. Each 1,594.80 195.00 310,986.32

227 MR Supply, installation, testing & commissioning of surface mounted

type 18-20 W LED light fixture 1200mm long with electronic

driver, pre-wired upto main connections complete as required as

per bajaj cat no BCLSB 18 NW or equivalent. Each 1,025.82 48.00 49,239.35

Balance work (Testing commissiong and mending good to

damages or any other works as required in proper satisfactory

working condition as per Standard. for final handover to NBCC

/ Client at their satisfaction) Each 153.87 3.00 461.62

228 MR Supply, installation, testing & commissioning of surface mounted

type light fixture suitable for 2 x 18 W LED lamp with electronic

driver and mounting arengment (in contractor scope), pre-wired

upto main connections complete as required as per Bajaj cat no

BLRB-DB 218+2xBLRB 18W CW or equivalent.

229 MR Supply, installation, testing & commissioning of above mirror

mounted type 5 W LED light fixture with electronic driver, pre-

wired upto main connections complete as required as per Bjaj

Cat No BCLSB 05 NW or equivalent. Each 612.01 10.00 6,120.15

230 MR Supply, installation, testing and commissioning of surface 12W

LED downlight fixture complete as required and as per Bajaj cat

no BGSLO Sleek Surface 12 WH RD or equivalent. Each 1,775.84 114.00 202,445.76

231 MR Supply, installation, testing and commissioning of Spot Light

28W LED fixture complete as required and as per Bajaj cat no

BRTL 28W LED or equivalent. Each 7,801.88 - -

232 MR Supply, installation, testing and commissioning of LED system

consisting of 18 LED. Luminaire luminous flux 3800 lm,

connected load 43 W, luminous efficiency of luminaire 88 lm/W.

Light colour neutral white, colour temperature 4000 K, colour

rendering index Ra > 80. service life: L80 (tq 35 °C) = 50,000 h,

Spotlight body of die-cast aluminium, Colour of luminaire body

anthracite, similar to DB 703 with metal effect, highly weather

resistant, powdercoated. Further colour variants possible from

RAL or DB colour codes. With pan-and-tilt, Swivel range 195°,

Rotation range 360°. With flat cover, extra clear, 5 mm, Optical

system consisting of one PMMA lens system for each LED. With

rotationally symmetrical medium-wide light distribution.

Maximum light intensity in beam angle 2 x 11°. complete as

required and as per Trilux Faciella 20 RM1L or equivalent. Each 64,119.12 12.00 769,429.38

233 MR Supply, installation, testing & commissioning of Decorative wall

light with min 18W LED lamp with made of Stainless steel and

Glass. Make : Bajaj/Philips Wall Light or equivalent

234 MR Supply, installation, testing & commissioning of LED Bulkhead

luminaire as per Bajaj Cat no BIBWP 10W LED or equivalent. 1,853.43 - -

Balance work (Testing commissiong and mending good to

damages in proper satisfactory working condition as per

Standard. for final handover to NBCC / Client at their

satisfaction) Each 278.01 21.00 5,838.30

235 MR Supply, installation, testing & commissioning of Aviation

obstructing light fixture complete as required with accessories

and as per as per bajaj cat no BGAV 302 LED or equivalent. Each 5,008.69 - -

236 MR Supply, installation, testing & commissioning of 45W LED post

top light fixture with suitable arm and all accessiories as per

Bajaj cat no BRIL 45W LED NW or equivalent. 16,388.33 - -

Work already executed by the previous agency Each 13,930.08 - -

Balance work (Proper testing ,commissioning or any other

works as required and handing over in proper staisfatory working

condition of EIC/ client) Each 2,458.25 - -

237 MR Supply, installation, testing & commissioning of up & Down LED

light fixture with all accessiories as per Bajaj cat no BLWUD 70

MH T WOB or equivalent. Each 14,960.70 9.00 134,646.32

238 MR Supply of following size special design energy saving ceiling

fans similar to Havells Energy Saver with low power

consumtion as specified below aluminum motor covers of larger

diameters complete with copper winding, double ball bearings,

Aluminium blades, down rod, shackle insulator, canopy but

without regulator etc complete as required . - -

MR 1400 mm sweep Nos. 2,387.99 - -

239 MR Supply Exhaust fan 300 mm dia 1400rpm complete with louvers,

copper winding and provision of cable from ceiling

rose/connector to fan all as specified as per Havells Power

240 MR Supply Exhaust fan 450 mm dia 1400rpm complete with louvers,

copper winding and provision of cable from ceiling

rose/connector to fan all as specified as per Havells Power

Sl. No. Ref. Name of Estimate Unit Rate Quantity for BOQ Amount for BOQ

Cable, Cable Tray & Cable management - -

241 Supply & Laying of following sizes of Stranded

Aluminium/copper Conductor FRLS XLPE insulated PVC

sheathed heavy duty power armoured cable A2XFY confirming

to IS-7908- Part 1 1100 volt grade ISI marked etc & cable

manufecture shall have NABL Accredited Lab and complete as

required. - -

MR 4 x 16 Sq mm Aluminium Metre 254.84 200.00 50,968.24

MR 3.5 x 25 Sq mm Aluminium Metre 314.59 200.00 62,917.63

MR 3.5 x 35 Sq mm Aluminium Metre 377.96 100.00 37,795.85

MR 3.5 x 95 Sq mm Aluminium Metre 771.72 200.00 154,343.75

MR 3.5 x 150 Sq mm Aluminium Metre 1,122.03 50.00 56,101.64

MR 3.5 x 185 Sq mm Aluminium Metre 1,376.39 25.00 34,409.80

MR 3.5 x 240 Sq mm Aluminium Metre 1,728.51 - -

MR 3.5 x 300 Sq mm Aluminium Metre 2,069.77 260.00 538,141.15

N.S. 3.5 x 400 Sq mm Aluminium Metre 2,668.11 - -

242 MR Supplying & laying of the following size of HT cable of 11KV(E)

XLPE & cable manufecture shall have NABL Accredited Lab as

per IS- 7098, Part-II of following size in the existing DUCT/RCC/

HUME/ METAL PIPE/CABLE TRAY as required.

Earthing & Lightning Conductor - -

243 MR Supply and Installation of basic earthing material to construct

unit maintenance free chemical earthing. Earthing should be

Copper bonded Rod of 3 Mtr long, 17.2 mm dia with copper

bonding thickness of minium 250 microns. The rod should be

duly certified and tested by CPRI & UL. Earth Rod shall have

pass the test required of BS 7430/ANSI/UL 467 and confirm to

the adhesion of the copper coating to the steel core and Body

system of earthing shall be TNS. To ensure the moisture content

and electrical conductivity, min 50 Kgs of Reflow - resistance

lowering grounding minerals shall be used as a backfill

compound. The compound shall be of low resistance & high

conductivity in nature with carbon as a major content which

dramatically lowers ground resistance system in difficult soil

situations. Ground Enhancement material shall be as per IEEE -

80 Clause 14.5d with a resistivity of less than 0.12 Ohm-Meter.

Balance installation testing and commissioning

Testing commissiong and mending good to damages in proper

satisfactory working condition of already installed earthings as

per Standard. Set 1,883.64 28.00 52,741.92

244 MR Supply & Installation of FRP earth pit chamber (300mm x

300mm) shall be included in the scope of work. Installation

would be as per supplier. Set 861.95 30.00 25,858.51

245 MR The specification covers design & supply of Advance Lightning

Protection System ION Streamer, the system should be so

designed to be capable of protecting against direct lightning

point as well as conducting/diverting it to Earth completely after

tracing the lightning in advance. The air terminal should be of 8

inches length with 3 inches dia. and verified and tested from

CPRI at 40 kA current discharge. Supplier should be A Class

Contractor; the product should be tested from

International/National Laboratory. - -

System Components: The system should consist of the following

components for performing the desired task as above in the

i) Early Streamer Emission Air Terminal with following

features: Set 68,449.97 - -

a) Stainless Steel central capture head of 316 L - -

b) Other avoiding bolting and water infiltration that can cause

premature corrosion - -

c) Ion Generator Device non electronics type for early streamer

d) Control over release of ions positive or negative generation of

streamer through Corona Effect. - -

e) Follow the concept of NFC 17-102 - -

f) Area coverage in radius 32 mtrs. - -

g) System should not depend on electrical energy - -

h) ESE air terminal should be mounted on round insulator having

80 mm dia. and length of 145 mm for termination of down

conductor. This should be mounted between air terminal and

i) Dimension and weight to be furnished - -

ii) Mast and Insulator with following features: Set 5,422.50 - -

Sl. No. Ref. Name of Estimate Unit Rate Quantity for BOQ Amount for BOQ

a) Supply of mast and insulator and it shall be mounted at least 2

Mtr clear to the highest point on roof top by support. The mast

should be 40 mm dia GI Pipe duly galvanized with minimum 85

micron zinc coating with stand of 100 X 100 X 7 mm. - -

b) Insulator – High Grade DMC based insulator for giving

appropriate path to fault current via down conductor. - -

iii) Lightning Strike Counter with following features: Set 7,801.88 - -

a) Number of counts- 6 digits - -

b) Current sensitivity- 1 kA to 200 kA - -

c) Inductance Shunt- 0.5 micro Henry - -

d) Enclosure- IP 67 - -

e) No external power source is required - -

iv) Down Conductor with following features: Mtr 536.21 - -

a) Supply of JMV Copper 70 sq mm Teflon insulated cable for high

lightning discharge current as a down conductor. Cable should

be composed of copper core covered by concentric silver plating

on it. The tensile strength should be between 220-270 (N/sq

mm), resistance (IACS) 100%, conductivity 58.5 (S*m/sq mm)

and able to withstand temperature of 350 ° C. The conductor

should have high conductivity, thermal resistance and bright and

shiny surface. - -

B : EXTERNAL ELECTRICAL INSTALLATIONS ( SCHEDULE

Misc. safety equipment - -

246 2.21 Providing and fixing M.V. danger notice plate of 200 mm X 150

mm, made of mild steel, at least 2 mm thick, and vitreous

enameled white on both sides, and with inscription in signal red

colour on front side as required. Each 141.00 10.00 1,410.00

247 2.22 Providing and fixing H.T. danger notice plate of 250 mm X 200

mm, made of mild steel, at least 2 mm thick, and vitreous

enameled white on both sides, and with inscription in signal red

colour on front side as required. Each 155.00 8.00 1,240.00

248 MR PACKAGE SUBSTATION - -

Supply, installation, testing & commissioning of 11kV compact

secondary substation outdoor type designed for natural cooling

(K-10 class), having type tested equipments comprising of dry

type distribution transformer and SF-6 insulated compact

switchgear enclosed in robotically sealed stainless steel tank,

low-voltage switchboard, interconnection between HT

switchgear and transformer using 3Rx1Cx95sqmm XLPE cables

and transformer to LT-switchgear using aluminium busbars,

factory built ready for connection type, internal GI earthing

provided complete with other associated equipments etc.

complete as required conforming to IEC 62271-202 and relevant

IS specifications, as regards to design, manufacturing, type-

testing, routine-testing and general operator safety precautions.

The enclosure shall have modular construction using atleast

2mm thick GI. Sheet and shall be powder-coated from exterior.

Complete compact substation including RMU, Transformer & LV

side shall be made/supply of same OEM.The Transformer

compartment will have IP-23 ingress protection, naturally

ventillated, CFL illuminated and suitably interlocked to trip on

door-opening: - -

MR HT Switchgear - -

HT SWITCHGEAR shall comprise of 03-Way RMU having

02nos. Load Break Switch and 01no. Fixed-Type VCB feeding

respectively to X'mer, all enclosed in common tank, made from

Stainless Steel sheets, and filled with SF6 gas acting as an

excellent insulating medium. The tank design shall meet IP-67

criteria with SF6 gas leakage rate less than 0.1% per-annum,

and shall be Arc-Proof design with Internal Arc criteria of 20kA/1-

sec, which shall be proven via suitable type-test report for similar

design showing the RMU placed inside the CSS. Make :

Siemens, Schneider, Abb

The complete RMU shall be a front-panel design comprising of

following accessories:

The breakers shall have stored energy spring-charging

mechanism with manual spring charging and distinct

mechanical/electrical operated push-buttons for breaker

ON/OFF arrangement. It will be provided with integrated Self-

Powered 3OC+1EF relay with LCD display, capable of tripping

on Low and High set for Over current and Earth Fault. Relay

should have facility to display the maximum loaded phase

current and record minimum 5 fault records with time stamping.

Relay shall be operated via Resin cast RingCore Protection CTs

of suitable ratio and burden, pre-installed in the respective cable-

The Ring Switches and Tee-Off Circuit Breaker are provided

with Integrated Earthing Switches with Making Capacity. - -

Earth interlocked, arc proof Cable boxes having bushing

arrangement for cable-termination along with capacitive voltage

indicators - -

Removable/Replacable SF6 Gas pressure indicator with gas-

recharging facility. - -

Sl. No. Ref. Name of Estimate Unit Rate Quantity for BOQ Amount for BOQ

Shunt trip coil rated for 230V AC. - -

HT CT/PT metering unit comprising of associated HT CT having

ratio 15/1, 3VA, Cl.1.0 and associated fuse-protected PT having

ratio 11kV/110V, 25VA, Cl.1.0 with suitable LEDs for R-Y-B

Phase indication, thermostat based space heater and

Multifunction meter for measuring various parameters such as

Amp, kV, kVA, kW, pF, Hz etc. - -

Transformer - -

TRANSFORMER shall comprise of 500KVA 11KV/433V DYn11

Copper Wounded Cast Resin Dry Type Transformer with Off

load tap links of +5% to -5% @2.5% with WTI scanner.

Transformer shall be double wound ,core type with low loss, non

ageing ,high permeability PRIME GRADE , CRGO with M4

Grade or Better, perfectly insulated and clamped to minimize

noise and vibrations. Standard : IEC 60076 ,Class of

Insulation:minimum F, Temperature rise 90 deg.C. Losses (IS

Tol.) as per data sheet encl. and Impedance of 5% (IS Tol.).

Transformer shall be of same make as OEM of CSS..

Oil Temperature Indicator – 1 No - -

MR LT Switchgear - -

LT PANEL shall comprise of IP4X protected, powder coated

panel installed inside IP54 protected enclosure requiring no

external cooling arrangement, using Aluminium busbars rated

for 1000Amp, TPN design, suitably labelled for phase

identification purpose, and having voltmeter+R-Y-B LED

indications to notify presence and quality of voltage available on

busbar. The LT Panel shall comprise of following configuration:

1 No. 4-pole 800A, 50kA, ACB with microprocessor based over

current, short circuit & earth fault release with all accessories &

IP-54 protection. Trip release with LCD display shall have

thermal memory, ZSI ,last ten trip history and capable of current

& voltage metering. Distinct fault indication on release of OL,SC

& EF. Schneider Electric , Siemens , ABB

PSS Complete as above and as required EACH 2,232,808.91 - -

ELECTRICAL LV PANELS & ACCESSORIES - -

249 MR Supply, installation, testing and commissioning of front operated,

front / back access, cubicle type, indoor duty, floor / wall / recess

/ surface mounted (as specified), totally enclosed dust and

vermin proof switchboards / panels with minimum Ingress

protection classification of IP 44, fabricated from 2 mm thick

CRCA sheets with dip coat priming and epoxy powder coated

finish. The panel must be suitable for 415 volts 3 phase, 4 wire,

50 Hz, system , must be able to withstand symmetrical fault level

of 50 KA for 1 sec at 415 V and must include all

interconnections, earthing and bonding requirements etc. The

panel must conform to standards, as required and as given

The Switchboard shall be provided with detachable gland plates

for entry of cables from the top / bottom as required. - -

All live accessible parts shall be shrouded and all equipment

shall be finger touch proof. The busbars shall be insulated with

heat shrinkable sleeves. SMC / DMC shrouds and busbar

supports suitably spaced shall be used. Hinged doors with

padlocking facility shall be provided on all outgoing feeders with

switch handles lockable in OFF position.

The panel shall have aluminium busbars with bar type feeder

connections, spacers etc. with full sized neutral.

Earthing all components, frame etc. to a common internal earth

bar of size 25 x 6 mm Cu.

Panel / Switchboard board design shall be compact and

components / accessories of compact sizes shall be used to

economise the room space available. Employer reserve the right

to seek compact items inplace of larger ones. - -

MAIN LT PANEL - -

PSS & DG Set Incomer (2 No.) and shall be equipped with: - -

2 nos 800 A 4 Pole EDO type electrically operated air circuit

breaker with 230V AC spring charging motor; micro processor

based O/C, S/C & E/F release with communication through

RS485/RS232 Port; 6 NO + 6 NC auxiliary contacts for fire alarm

(switch) and each contains following.

1 No. 24V DC shunt release. - -

1 No. 230V AC closing coil. - -

1 No. 415V AC under voltage release. - -

1 No. Analog Ammeter 0-1250 A with ASS. - -

1 No. Analog Voltmeter 0-500 V with VSS. - -

Sl. No. Ref. Name of Estimate Unit Rate Quantity for BOQ Amount for BOQ

3 Nos. CTs 1250/5A Class 1.0 for metering. - -

1 No. CT 1250 / 5A for APFC relay. - -

1 No. MFM - -

1 No. TNC Switch - -

Trip Circuit Supervision & Master Trip Lockout Relay - -

1 nos Tvss 100KA (SPD) of each incomer. - -

Over voltage and under voltage relay with a tripping mechanism

for persisted voltage of 110 % or 90 % of rated voltage shall be

provided & No voltage relay shall be provided for giving signal

to DG incomer/PLC Panel. - -

Indications with 2 A SP MCB back up: - -

R,Y,B Phase - -

Breaker ON, OFF, TRIP & Trip Circuit Healthy - -

Spring Charged. - -

Bus Coupler - -

1 nos 800 A 4 Pole EDO type electrically operated air circuit

breaker with 230V AC spring charging motor; micro processor

based O/C, S/C & E/F release with communication through

RS485/RS232 Port; 6 NO + 6 NC auxiliary contacts (switch) and

all accessiores. - -

Interlocking - -

Electrical & Mechanical Interlocking with 1 nos transformer

incoming & 1 nos DG set incoming with 1 no bus coupler in such

a way that at any one time two supplies should not get mixed up.

Electrolytic high conductivity 3-phase 4 wire aluminium

conductor bus-bars rated 1000 Amps, suitable to withstand

symetrical fault level of 50 KA for 1 second at 415 volts and with

necessary heat shrinkable sleeving.

Outgoing: - -

3 Nos. 400/630 A 4P MCCB 50 KA having microprocessor

based Trip Unit with protection against Overload (with base

setting and fine adjustment), Short Circuit and Earth Fault (all

with adjustable time delays) and instantaneous protection,

NO/NC contacts for operation, LED Indication for Phase, CB

'ON', 'OFF', 'TRIP' complete as required. - -

7 Nos. 250/200 A 4P MCCB 50 KA having microprocessor

based Trip Unit with protection against Overload (with base

setting and fine adjustment), Short Circuit and Earth Fault (all

with adjustable time delays) and instantaneous protection,

NO/NC contacts for operation, LED Indication for Phase, CB

'ON', 'OFF', 'TRIP' complete as required. - -

3 Nos. 125 A 4P MCCB 25 KA having Thermal Magnetic Trip

Unit with protection against Overload and Short Circuit, LED

Indication for Phase, CB 'ON', 'OFF', 'TRIP' complete as

required. - -

4 Nos. 100 A 4P MCCB 25 KA having Thermal Magnetic Trip

Unit with protection against Overload and Short Circuit, LED

Indication for Phase, CB 'ON', 'OFF', 'TRIP' complete as

required. - -

3 No. 63 A 4P MCCB 25 KA having Thermal Magnetic Trip Unit

with protection against Overload and Short Circuit, LED

Indication for Phase, CB 'ON', 'OFF', 'TRIP' complete as

required. - -

Main LT Panel complete as above and required: Each 1,301,747.47 - -

Balance work (Lifting,shifting,positioning,installation,testing and

commissioning or any other works as required to complete in all

respect as per specification and drawing. for final handover to

NBCC / Client at their satisfaction) Each 195,262.12 1.00 195,262.12

CAPACITOR PANEL - -

250 MR Design, manufacturing, testing at works and SITC of cubical

type CRCA sheet steel free standing indoor type 125 KVAR

Capacitor Bank Panel with shunt capacitor with harmonic filter

and discharge resistor suitable for 400/440 V, 3 phase 50 Hz

supply system and having aluminium bus bars and accessories

with their connections. The panel shall be well ventilated, dust

and vermin proof extensible on both sides etc. complete as

required. - -

1 No. 400 A TP MCCB 35 KA with microprocessor based

release for O/C & SC protection, 3 Nos. CT 630/5 A class 1.0, 0-

630 A Ammeter with built in ASS, TNC Switch, Indication for

Phase, CB 'ON', 'OFF', 'TRIP' complete as required.

400 Amps 3-phase 4 wire electrolytic aluminium conductor bus

bar 35 KA rms - -

5 nos. 80 A TP MCCB with thermal magnetic release 35 KA

breaking capacity - -

5 nos. contactor 70 A capacitor duty with 230 V AC coil - -

5-8 sets of Red-Green (ON-OFF) self illuminated push buttons

for manual operation of capacitors - -

5 nos. 25 KVAR MPP capacitor bank with 7 % D-tuned reactor

filter and discharge resistor - -

Sl. No. Ref. Name of Estimate Unit Rate Quantity for BOQ Amount for BOQ

1 no. 12-step APFC Relay with binary operation having facility to

change the sequence of switching 'ON' the capacitor banks as

required so that the end unit is not kept idle for long. - -

ON/OFF indication lamp with 2 A SP MCB backup in each

capacitor unit - -

OFF delay timer for manual mode Aux. Contactor as required

1 no. selector switch for Auto/Manual/Off - -

Capacitor Panel complete as above and required: Each 250,004.38 - -

Balance work (Lifting,shifting,positioning,installation,testing and

commissioning or any other works as required to complete in all

respect as per specification and drawing. for final handover to

NBCC / Client at their satisfaction) Each 37,500.66 1.00 37,500.66

GROUND, 1st, 2nd, 3rd, 4th & 5th FLOOR PANEL - -

251 MR 1 No. 200 A, 415V, 25 kA, 4P MCCB having (1) Microprocessor

based Trip Unit with protection against Overload (panel should

be fitted Wall/floor), Short Circuit and Earth Fault (all with

adjustable time delays) and instantaneous protection; (2) NO/NC

contacts for operation and neutral sensor for earth fault

protection. - -

Indication - -

LED Indication Lamp for ON, OFF & TRIP. - -

LED Phase Indication Lamp for R, Y and B - -

1 No digital Voltmeter with Inbuilt Selector Switch. - -

1 No digital Ammeter with Inbuilt Selector Switch. - -

3 Nos. CTs 200/5A, 10VA, CL-1 for metering. - -

Electrolytic high conductivity FP aluminium conductor bus-bars

rated 250 Amps, suitable to withstand symetrical fault level of 25

KA for 1 second at 415 volts and with necessary heat shrinkable

Outgoings - -

5 No. 63A 4P MCCB 25 KA having Thermal Magnetic Trip Unit

with protection against Overload and Short Circuit complete as

required. - -

4 No. 63/40 A DP MCB 10 KA complete as required. - -

Electrical Panel complete as above and as required. Each 182,761.04 - -

Balance work (Lifting,shifting,positioning,installation,testing and

commissioning or any other works as required to complete in all

respect as per specification and drawing. for final handover to

NBCC / Client at their satisfaction) Each 27,414.16 6.00 164,484.94

EXTERNAL LIGHTING FEEDER PILLAR - -

252 MR Fabrication, supplying and installation of outdoor type cubical

feeder pillar of suitable size not less than 30 cm and upto 45 cm

deep made out of M.S. sheet 2mm thick (14 SWG) duly

compartmentalized having 4 strip busbar of 100 Amp capacity

double door with locking arrangement for protection from rain,

dust, duly fixed on MS angle iron frame work of size 50mm x

50mm x 6mm (NS) 90 cm long legs out of which 45 cm duly

grouted in cement concrete 1:2:4 (1 cement : 2 sand :4 stone

aggrete 20mm) and having following accessories mouted inside

the cubical panel i/c connection, inter connection with aluminium

thimbles, earthing with two nos. earth struds duly painted with

one coat of red oxide & two coats of superior quality enamel

paint complete etc. as reqd. - -

Supplying & fixing of following accessories in the existing cubical

panel board / feeder pillar including connection testing and

having provision for energy meter inside panel etc. as reqd.

INCOMING- - -

100 A,4-pole 25 KA MCCB --1 no 40KA surge arrester/SPD. - -

OUTGOING- - -

63/40 A,4-pole 15 KA MCB --2 no - -

Power Contactor 3 pole suitable for 63 amp. --3 nos. - -

Voltmeter 0-500 V ,96 sq. mm flush type with selector switch-1

Ammeter 0- 100 A ,96 sq. mm flush type with selector switch

and CT's of suitable ratio - 1 Set. - -

Indication lamps (RYB) LED type with protection MCB's - 1 set

Rex Timer (Legrand Make) - 8 Nos. - -

SPN MCB 25 Amp - 8 Nos. - -

Danger notice plate --1 no - -

External Lighting Feeder Pillar complete as above and

required: #REF! 99,139.37 - -

Balance work (Lifting,shifting,positioning,installation,testing and

commissioning or any other works as required to complete in all

respect as per specification and drawing. for final handover to

NBCC / Client at their satisfaction) Each 14,870.90 1.00 14,870.90

UPS PANEL - -

Sl. No. Ref. Name of Estimate Unit Rate Quantity for BOQ Amount for BOQ

253 MR 1 No. 100 A, 415V, 25 kA, 4P MCCB having (1) Microprocessor

based Trip Unit with protection against Overload (panel should

be fitted in rising main/floor), Short Circuit and Earth Fault (all

with adjustable time delays) and instantaneous protection; (2)

NO/NC contacts for operation and neutral sensor for earth fault

protection. - -

Electrolytic high conductivity FP aluminium conductor bus-bars

rated 125 Amps, suitable to withstand symetrical fault level of 25

KA for 1 second at 415 volts and with necessary heat shrinkable

7 Nos. 63/40 A 4P MCCB 15 KA having Thermal Magnetic Trip

Unit with protection against Overload and Short Circuit, LED

Indication for Phase, CB 'ON', 'OFF', 'TRIP' complete as

required. - -

6 Nos. 40 A SPN MCB 15/10 KA complete as required. - -

UPS Panel complete as above and as required. #REF! 136,207.97 - -

Balance work (Lifting,shifting,positioning,installation,testing and

commissioning or any other works as required to complete in all

respect as per specification and drawing. for final handover to

NBCC / Client at their satisfaction) Each 20,431.20 1.00 20,431.20

LIFT PANEL - -

254 MR 4 Nos. 63 A 4P MCCB 15 KA having Thermal Magnetic Trip

Unit with protection against Overload and Short Circuit, LED

Indication for Phase, CB 'ON', 'OFF', 'TRIP' complete as

required. - -

3 Nos. 40 A SPN MCB 15/10 KA complete as required. - -

Lift Panel complete as above and as required. #REF! 146,553.09 - -

Balance work (Lifting,shifting,positioning,installation,testing and

commissioning or any other works as required to complete in all

respect as per specification and drawing. for final handover to

NBCC / Client at their satisfaction) Each 21,982.96 2.00 43,965.93

VRV OUTDOOR PANEL - -

255 MR Incomer: - -

(Note: Feeder Pillar shall be IP-67 with Stainless Steel outer

enclosure) - -

1 no. 250/400A, 415V, Ics=35kA, TPN MCCB with variable

overcurrent and short circuit releases & each complete with - -

i. 3 nos. cast resin current transformers of 200/5 ratio with 15 VA

Burden & Class 1.0 for Ammete with Ammeter selector Switch .

ii 1 Set of (0-500 volts) digital voltmeter with selector switch with 2

amps MCB‟s. - -

iii 1- set Red/Green ON/OFF indicating lamps - -

iv 1- set of three phase (red, yellow, blue) indicating lamps - -

v Amber healthy trip indicating lamps - -

Electrolytic high conductivity Aluminium three phase and neutral

busbars rated at 400 A having a maximum current density of 1.0

A per sq mm suitable to with stand symmetrical fault level of

Outgoing : - -

Tweleve (10) Nos. 40-63A TP MPCB including 5-20 KW Star

Delta Starter with thermal range of 40A - 63A. - -

Tweleve (3) Nos. 25-40A TP MPCB including 1-5 KW Dol

Starter with thermal range of 25A - 40A. - -

Starters: - -

Starter complete with AC3 duty power contactor, single phasing

preventer, ON-OFF and Trip Indicating lamps, Start/ Stop push

buttons, Auto Manual Selector Switch, auxiliary contacts for

Building Automation System & remote control, interlocking etc.

suitable for the motor KW as specified below

The switchboard shall be complete with all inter connections,

risers, internal wiring, labels etc complete as required

Balance work (Lifting,shifting,positioning,installation,testing and

commissioning or any other works as required to complete in all

respect as per specification and drawing. for final handover to

NBCC / Client at their satisfaction) Set 52,867.30 1.00 52,867.30

Starter/Isolator Switch For VRV Outdoor / Variours Work - -

256 a SITC of 100A 3 Phase by pass switch with all accessiories as

required. Set 26,293.15 - -

Balance work (Lifting,shifting,positioning,installation,testing and

commissioning or any other works as required to complete in all

respect as per specification and drawing. for final handover to

NBCC / Client at their satisfaction) Set 5,258.63 1.00 5,258.63

257 b Upto 5HP, DOL starter comprising 3 Nos. TP contactor AC-3

duty Auto/Manual switch, Start Stop push button, bimetallic over

current relays single phasing preventer and timer & with

potential free contacts for remote monitoring and control.

Sl. No. Ref. Name of Estimate Unit Rate Quantity for BOQ Amount for BOQ

Balance work (Lifting,shifting,positioning,installation,testing and

commissioning or any other works as required to complete in all

respect as per specification and drawing. for final handover to

NBCC / Client at their satisfaction) No. 1,544.73 2.00 3,089.46

258 c 10/7.5 HP, Star Delta starter comprising 3 Nos. TP contactor

AC-3 duty Auto/Manual switch, Start Stop push button, bimetallic

over current relays single phasing preventer and timer & with

potential free contacts for remote monitoring and control.

Balance work (Lifting,shifting,positioning,installation,testing and

commissioning or any other works as required to complete in all

respect as per specification and drawing. for final handover to

NBCC / Client at their satisfaction) No. 1,751.63 2.00 3,503.26

259 d SITC of 63 A 4 pole isolator/RCCB switch for Outdoor/Indoor

Unit with sheet metal enclosure, rain protection etc. as

required to suit the site condition. No. 1,224.03 - -

Balance work (Lifting,shifting,positioning,installation,testing and

commissioning or any other works as required to complete in all

respect as per specification and drawing. for final handover to

NBCC / Client at their satisfaction) No. 244.81 2.00 489.61

260 e SITC of 40 A 4 pole isolator/RCCB switch for Outdoor/ Indoor

Unit with sheet metal enclosure, rain protection etc. as

required to suit the site condition. No. 1,224.03 - -

Balance work (Lifting,shifting,positioning,installation,testing and

commissioning or any other works as required to complete in all

respect as per specification and drawing. for final handover to

NBCC / Client at their satisfaction) No. 244.81 2.00 489.61

Misc. safety equipment - -

261 MR Providing and fixing carbon dioxide(CO2) type fire extinguishers

confirming to IS 15683- 2006 and cylinders fully charged of

foloowing capacity - -

Providing and fixing ABC type fire extinguishers confirming to IS

15683- 2006 and cylinders fully charged of following capacity

c Supply and fixing safety instruction chart in word duly framed

with 5mm thick glass as required ( Approx front area 1.20

d Providing of set of 4 Nos .9.5 Ltr capacity GI bucket painted in

post office red colour with prior coat of red oxide paint and

written with white paint (fire) and mounted on MS angel iron

frame with bracket of appropriate size and capacity including

filling sand etc. Each 1,646.53 1.00 1,646.53

e Providing first aid box as approved by St.John ambulance

brigade /Indian red cross confirming to IS 2217 - 1963 Each 379.29 1.00 379.29

Providing laying and fixing of insulating mat 1 mtr wide 3mm

thick to withstand 15 KV dielectric strength as per IS 15652 - Sq.

ELECTRICAL LOW VOLTAGE WORK - -

SUBHAED-I (LOW VOLTAGE WORK) (NON-SCHEDULED

Addressable Fire Aalrm system & P.A system - -

Supply, installation, testing and commissioning of following as

per specifications : - -

262 MR Microprocessor based Inteligent and electronically addressable,

modular, Expandable networkable. 1 loops Panel Panel with

each loop capacity of 250 Devices at any combinations, loop

lenght up to 3 KM. Fire alarm control panel WIth 5.7 inch touch

screen LCD display, multiple acces levels, 10,000 event history

logs in the non volatile memory (EEPROM). The panel should

be modular microprocessor Based In natureand should be

expandable from single loop up tc 32 loops. The panel shal!

have 240V AC power supply. Autornantic battery charger, 24V .

shield lead acid maintenance free battries sufficient for 24

houres normal working and then be capable of cperatlng the

system for 30mins during emergency condtion . provision for

integration to BMS Backnet software . The panel shall be EN-

54/VDS / UL certification.

263 MR Active Repeater panel with minimum 640 Character LCD display

complete system function keys for programming and control like

system reset, Alarm Acknowledge, Alarm Silence, Trouble

Acknowledge etc. as per specification .The panel shall be EN-

54/VDS / UL certification No 79,963.85 1.00 79,963.85

264 MR Addresable monitor module with 2 monitoring features .

Monitoring Of with EOL restore Potential free contact & voltage

monitoring shlla be EN54/VDs/UL Certifications . No 4,997.85 6.00 29,987.09

265 MR Addressable Control realy modules with flexible network with

maximum switching corrent of 1A @30V DC shall be EN54/VDs

certification/UL . No 4,997.85 6.00 29,987.09

Sl. No. Ref. Name of Estimate Unit Rate Quantity for BOQ Amount for BOQ

266 MR Addressable Heat Detector withfixed and rate of raise including

mountions base with LED. Etc. complete with require 2 isolater (

one for incoming and one for outgoing line ) integared in detector

for maintaining operational availability of all elements inthe loop

even in the event of a shor circuit & Drift compenstion features &

automatic addessing . FAP-425-DOT-RHigh resitence to

electromagnetic effects in accordable with EFSG Agreement

EFSG/F/97/005 shall be EN54/VDs/UL Certification Make (

267 MR Addressable detector with two optical sensors,one thermal and

one chemical sensor, manually and automatically with dual ray

technology including mountions base with LED. Etc. FAP-425-

DOTC-R complete with require 2 isolater ( one for incoming and

one for outgoing line) integared in detector for maintaining

operational availability of all elements inthe loop even in the

event of a shor circuit & Drift compenstion features & automatic

addessing shall be EN54/VDs/UL Certification Make (Bosch)

268 MR Addressable multisensor Smoke+Thermal detector with dual ray

technology including mountions base with LED. Etc. complete

with require 2 isolater ( one for incoming and one for outgoing

line ) integared in detector for maintaining operational availability

of all elements inthe loop even in the event of a shor circuit &

Drift compenstion features & automatic addessing shall be

EN54/VDs/UL Certification Make ( Bosch)

269 MR Supply , installtion , testing and commssioning of addressable

invisible detector for smoke optical component for flush fitting

in steel reinforced concrete ceiling or suspended ceilings having

a detection principle of two independent scattering light sensor

with sensing volumes directly beneath the detector with feature

of drift compensation , contamination detection by means of

thired optcal system , protection againest insect by means of

dual evelution system , protection againest external light in

accordance with EN-54-7,FAP‑520 chamber integrity monitoring

, optical fault display, self monitoring of sensor, programmable

of timed automatic sensitivity selection with junction box and

other accessories as required .shall be EN54/VDs/UL

Certification Make ( Bosch) No 13,327.31 - -

270 MR Addressable Manual Break glass Unit ( Double Action) with

flexible network structures & necessary fixing arragements with

keys complete as requirwd shall be EN54/VDs/UL ertification

Make (Bosch / Gramewell/Siemens/Fire Finder) No 4,164.73 14.00 58,306.22

271 MR Stand alone loop powered detector base sounder with 32

different tone various selection options & adjustable sound

pressure by 5 levels the sound pressure 92.1 db(A) with flasher

having synchorized flash rate of 1Hz and light intensity > 2cd

should be programmed from the panel shall be EN54/VDs/UL

Certification Make ; ( Bosch , Gamewell ,siemens , Fire Finder )

272 MR Response indicator with matching screw complete with GI

junction box cable lugs at cable and ferulling Make( Bosch/

Gamewell/Siemens/Fire Finder/omnitech) No 1,415.78 68.00 96,273.35

273 MR FIRE EXIT Signage with LED and battery back up and charger

with hanging arrangement complete as required

Make(Omnitech/ Heinrich /Aties ) No 5,711.33 14.00 79,958.69

Public Address System - -

274 MR Supply installation testing and commissioning of Digital PA

Controller cabable of handling 8 zones, DVA8 expandable upto

256 Zones with required size of rack.Digital audio controller

comlying to IEC EN 60849 with built-in high and low pass filters

and parametric equalizer capable of handling 8 loudspeaker

lines. Supervision of power amplifiers and hot-standby provision

for amplifier redundancy. Permenant, non-audible supervision of

loudspeaker lines also during power save mode. 4 inputs for

Automatic Volume Control. including suitable size of rack for

complete system.

275 MR Power Amplifier HPA 1480/100V

-Meets standards IED BS EN 60286-3, 55013, 55020

-Inrush restraint and softstart

-Integrated electronic protection against thermal overload and

-Temperature controlled fans, airflow from front to rear.

-Method of control: Class AB

-Power output of amplifier: 2 x 500W sin. /100V

-Output range: 50 Hz – 22kHz; 0/-0,5 dB

-Signal to noise ratio (not valuated): > 105 dB

-Channel separation: > 75 dB

-THD (total harmonic distortion): < 0,08%

-Input level at max. output voltage: 0 dBu

-The amplifier has to be switched into Stand-by Mode in case of

loss by the control centre.(Make-Bose, JBL, Aties, Heinrich)

Sl. No. Ref. Name of Estimate Unit Rate Quantity for BOQ Amount for BOQ

276 MR Digital Call Station DV-RM -In full compliance with .

-Fully digital call station with electret microphone (cardioid-

characteristics) on flexible 300mm swan neck complete with

wideband loudspeaker for monitoring, pre-listen and intercom

operation for the networked PA system.

-Permanent inaudible supervision of the microphone and its

capsule in accordance to EN 60849.

-8 free programmable and label able keys.

-The call station shall be connectable to an interface module of

the networked PA System in startopology by CAT5 – cable and

RJ45-plug (distance up to 300 m) or by E30 fire protected cable

(distance up to 200m). -Integrated audio input with 2 Cinch-

sockets for the connection of an external source (mono) to allow

signal insertion outside the central unit.

-Optional transparent key cover to prevent accidental use of

for alarms). (Make-Bose, JBL, Aties, Heinrich)

277 MR Music source complete as required. No 20,823.65 1.00 20,823.65

278 MR Volume Controller for all the closed areas. No 3,664.69 25.00 91,617.18

279 MR 6W multitap voice alarm speaker complying with BS2839 part 8 -

line voltage 100V Ceiling speaker) No 1,082.71 50.00 54,135.47

280 MR 12W multitap voice alarm speaker wall mountable BS2839 part

DSR 2014 SCHEDULE ITEMS - -

281 1.21 Supply and fixing of following sizes of medium class PVC

conduit along with accessories in surface/recess including

cutting the wall and making good the same in case of recessed

conduit as required : - -

1.21.1 Balance work (Testing ,commissioning or any other work

required of installed above item as per boq for final handover to

NBCC / Client at their satisfaction) metre 15.90 259.60 4,127.64

282 1.17 Supplying and drawing following sizes of FRLS PVC insulated

copper conductor, single core cable in the existing surface /

recessed steel / PVC conduit as required. - -

1.17.2 Balance work (Testing ,commissioning or any other work

required of installed above item as per boq for final handover to

NBCC / Client at their satisfaction) metre 10.80 378.20 4,084.56

IP EPABX SSYTEM - -

283 Supply, installation, testing and commissioning of the following

components as required. - -

MR EPABX/ IP Based Communication System equipped for 50

VoIP user license, 08 CO trunk licenses & ISDN PRI (30

channels) licenses The basic technical specifications and

essential features for the proposed IP Enabled Communication

core and the remote units / gateways the remote units /

gateways are as below : The system shall be fully digital using

Pulse Code Modulation (PCM) and Time Division Multiplex

(TDM) technique conforming shall be 100% non-blocking Call

Forwarding (Fixed Call Forwarding, System Call Forwarding,

Forced Call Forwarding, Subscriber controlled Diversion,

Delayed Call Forwarding on Busy, Network-wide Call Forward

on No Reply after Transfer, Call Forwarding on No Answer)

Voice Mail system Consisting of Voice mail Boxes for all Users ,

Auto attendted system with greeting messages PC for Attending

voice mail system Maintenance and configuration of the system

must be via a industry standard browser. MAKE:AVAYA /

ALCATEL / SIEMENS Nos 297,484.29 1.00 297,484.29

284 MR IP PHONES MODEL: IP Telephone Instruments IP Telephone

should be 2 Line Display with 2 port Integrated Ethernet Switch

10/100 Mbps . Contacts button ,Call log button, Redial

button,Speaker button ,Mute button,Headset button,Hold button

Conference button,Transfer button, Drop button .Call by name

– Call by name service must be supported from the IP phones

equipped with Alphabetical keyboard. It must allow access to the

IP PBX directory Nos 27,368.96 2.00 54,737.93

285 MR IP PHONES MODEL, for Operator Console with: The offered

console should be a PC based attendant console and it should

work on IP network & shall be supplied with required headset

Phone Call Control including Conference Call Control &

Conference Rooms; Transfer, Hold, and

Park via drag & drop.Up to 16 Park Slots with customized labels,

Monitoring of up to 8 Queues & ability to answer calls

in queue, Configuration of Phone Preferences.Local Phone

Directory, Separate Call History logs – All, Incoming, Outgoing,

Missed Calls, Messages MAKE:AVAYA / ALCATEL / SIEMENS

Sl. No. Ref. Name of Estimate Unit Rate Quantity for BOQ Amount for BOQ

286 MR Supply, installation, testing and commissioning of normal

telephone instrument. Nos 1,290.99 10.00 12,909.89

287 MR Closed rack supports 19" wide rack-mount equipment with

Complete Accessories, Material should be of MS and lockable

with glass door. Alongwith both side cable manger pre-fitted. - -

288 MR Supply , installation, testing and commissioning of L-2-48 port-

gigabyte-10/100/1000,POE switch with 2 SFP ports. 148,147.12 1.00 148,147.12

CONDUITS AND CABLES - -

DSR'14 (DSR 2014)

289 1.21 Supply and fixing of following sizes of medium class PVC

conduit along with accessories in surface/recess including

cutting the wall and making good the same in case of recessed

conduit as required : - -

FIRE FIGHTING WORKS - -

M.R. FIRE PUMPS - ELECTRICAL - -

290 Supply, installation, testing and commissioning of horizontal

single stage centrifugal type factory assembled fire pumps

suitable for autometic operation at synchoronous speed of 2900

rpm, TEFC conforming to IP-55 & flexible coupling gaurd

mounted on a common structural base plate with 150mm dia

gun metal pressure gauges with isolation cock and piping,

suitable vibration elimination pads of approved design for pump

foundation, motor to be suitable for 415 volts, 3 phase 50 cycles

Capacity 2280 LPM at 5.6 Kg/cm2 delivery pressure for Fire

Hydrant Network. Set 420,217.66 - -

Capacity 180 LPM at 5.6 Kg/cm2 (Jockey Pump). Set 115,712.11 - -

Capacity 900 LPM at 3.5 Kg/cm2 (Roof Fire Pump). Set 140,072.55 - -

Work already executed by the previous agency Set 70,036.28 - -

Work already executed by the previous agency Set 42,021.77 - -

Balance work (Installation,testing and commissioning or any

other work as required complete in all respect as per

specification and drawing for final handover to NBCC / Client at

their satisfaction) Set 28,014.51 - -

ROOF PANELS: - -

Supply, installation, testing and commissioning of following

integrated, cubicle type,dead front, extensible, sheet steel

control panel. The panel shall be suitable for 440 volts, 50

cycles, 4 wire supply - -

The following components and accessories shall be mounted

with ineach control panel. - -

One no 60 amps TP incoming MCCB with the following: - -

0-500 volts 96 x96 square mm voltmeter with slector switch and

control fuses- 1 SET - -

0-100 amps 96 x96 square mm ammeter with CT's and slector

switch- 1 SET - -

Phase indicating lamp with toggle switches. - -

Indication lamps for ON/OFF/TRIP status - -

Outgoing Feeders / Starters as below: - -

60 ATP MCCB with star / delta as starter suitable for 15 HP

motor for Downcomer Pump - 1 Set - -

Provision in control panel to connect flow switch for autmatic

operation of roof fire pumps. - -

291 M.R. FIRE PUMPS - DIESEL - -

Supply, installation, testing and commissioning of horizontal

single stage centrifugal pumping set with CI volute and bronze

impeller with mechanical seals directly coupled to automatic

Diesel Engine complete with all accessories like self starting by

means of Battery powered electric starter motor, Paper Filter

type air cleaner, exhaust silencer etc. complete in all respects.

The engine & the pump will be mounted on common base plate

on anti-vibration mountings. - -

Capacity 2280 LPM at 5.6 Kg/cm2 delivery pressure for Fire

Hydrant & Sprinkler Network. Set 578,560.55 - -

Exhaust piping - -

292 M.R. Providing & fixing 150 mm diameter M.S. Class 'C' diesel pump

exhaust pipe includings all fittings, like bends, tees etc. clamps /

structural steel supports. The pipe shall be provided with 75mm

thick fiberglass insulation & covering the insulation with 500 g

polythene sheet giving proper overlaps & sealing the joints with

suitable adhesive compound. The pipe shall be provided with 24

gauge aluminium sheet cladding RM 1,803.65 20.00 36,072.95

Sl. No. Ref. Name of Estimate Unit Rate Quantity for BOQ Amount for BOQ

293 M.R. Supplying, installation, testing and commissioning of

annunciation panel made out of not less 1.6 mm thick CRCA

sheet powder coated in approved colour with locking

arrangement, audio and visual indication of fault and operation

of automatic sprinkler, system monitoring including providing

and fixing the following, connections interconnections etc.

complete as required. The Panel shall be Micro processor

type/solid state type.* Set 25,958.77 - -

Monitoring 4 Nos. of flow switches. - -

Monitoring the open circuit, short circuit & earth fault in control

cable between panel and flow switches. - -

Work already executed by the previous agency Set 20,767.01 1.00 20,767.01

Balance work (Installation,testing and commissioning or any

other work as required complete in all respect as per

specification and drawing for final handover to NBCC / Client at

their satisfaction) Set 5,191.75 1.00 5,191.75

294 M.R. PRESSURE SWITCH - -

Supplying, installing, testing and commissioning 0 to 12 Kg/ cm2

ON/OFF pressure switch in delivery line of pump along with

control wiring for auto starting and auto stopping of hydrant and

jockey pumps. Each 5,312.49 7.00 37,187.44

295 M.R. Supply, fabrication (as per code), installation, testing and

commissioning of Pressure vessels 450mm diameter and

1000mm high fabricated from 8-10mm M.S. plate with

accessories inside painting with epoxy paint and outside with

296 M.R. Providing, fixing, testing & commissioning of resilient rubber

lined single arch vibration eliminators suitable for raw water up to

45 deg. C temperature, working pressure 8.8 Kg/cm2 and test

pressure 14 Kg/cm2 for :- - -

297 M.R. Supply, installation, testing, trial run and commissioning of

hydrants all complete as required and as approved - -

Fire Hose Cabinet - -

298 1.6mm thick MS door frame 900x2100 door capable of

accommodating fire hose reel, landing valve, hose pipes, fittings

& accessories. The door shall have a front glass with lock and

key arrangement & shall be painted with post office red colour

(approval shall be taken on the basis of submitted sample before

ordering) Cost of fire extinguishers not included in item rate.

(Liasioing with civil contractor for making 900x600x2100

Recessed type mansoary box (by civil contractor).

Work already executed by the previous agency Each 12,037.68 12.00 144,452.11

Balance work (Installation,testing and commissioning or any

other work as required complete in all respect as per

specification and drawing for final handover to NBCC / Client at

their satisfaction) Each 3,009.42 12.00 36,113.03

299 TAC approved 1.6mm thick M.S. fire hose cabinet

(750x600x250mm) made out of 16 gauge M.S. sheet capable of

accommodating landing valve, hose pipes, fittings &

accessories. The box shall have a front glass door with lock and

key arrangement & shall be painted with post office red colour

(approval shall be taken on the basis of submitted sample before

ordering) - for external and roof hydrant. Each 4,388.74 6.00 26,332.42

300 63mm dia single outlet GM landing valve IS marked with suitable

size bolts, nuts, washers and gaskets. Landing valve shall be

TAC Approved Make. Each 6,124.68 16.00 97,994.94

63mm dia twin outlet GM landing valve IS marked with suitable

size bolts, nuts, washers and gaskets. Landing valve shall be

TAC Approved Make. Each 13,124.32 - -

Work already executed by the previous agency Each 10,499.46 - -

Balance work (Installation,testing and commissioning or any

other work as required complete in all respect as per

specification and drawing for final handover to NBCC / Client at

their satisfaction) Each 2,624.86 - -

301 First aid hose reel with 25 mm dia, 30 m long rubber hose, ball

valve, piping and GM nozzle Each 5,374.72 - -

Work already executed by the previous agency Each 4,299.78 12.00 51,597.34

Balance work (Installation,testing and commissioning or any

other work as required complete in all respect as per

specification and drawing for final handover to NBCC / Client at

their satisfaction) Each 1,074.94 12.00 12,899.33

302 63mm reinforced rubber hoses (RRL) with male and female GM

coupling, IS marked- 15 m long Each 4,437.27 - -

Work already executed by the previous agency Each 3,549.82 32.00 113,594.13

Balance work (Installation,testing and commissioning or any

other work as required complete in all respect as per

specification and drawing for final handover to NBCC / Client at

their satisfaction) Each 887.45 32.00 28,398.53

Sl. No. Ref. Name of Estimate Unit Rate Quantity for BOQ Amount for BOQ

303 standard short size GM branch pipe with nozzle of 20mm

nomnal bor outlet with instaneous type 63 mm dia coupling

complete IS marked & TAC approved. Each 1,937.40 - -

Work already executed by the previous agency Each 1,549.92 16.00 24,798.72

Balance work (Installation,testing and commissioning or any

other work as required complete in all respect as per

specification and drawing for final handover to NBCC / Client at

their satisfaction) Each 387.48 16.00 6,199.68

304 Fire Axe Each 687.46 - -

Work already executed by the previous agency Each 549.97 12.00 6,599.66

Balance work (Installation,testing and commissioning or any

other work as required complete in all respect as per

specification and drawing for final handover to NBCC / Client at

their satisfaction) Each 137.49 12.00 1,649.91

305 M.R. Supply, installation, testing and commissioning ss orifice plates

in pipelines to reduce pressure from 8 kg. to 3.5 kg/sq.cm.

306 M.R. Providing, installing, testing & commisioning of fire brigade inlet

connection (fire department connection) consisting of 4 Nos. 63

mm dia instantaneous inlet arranged on a 50 mm dia header, 1

No. 150 mm diameter Butterfly valve, 1 No. 150mm dia. Non-

return valve and wall mounted box of M.S. construction with

glass door to house the above mentioned components.

Work already executed by the previous agency Set 18,954.02 3.00 56,862.06

Balance work (Installation,testing and commissioning or any

other work as required complete in all respect as per

specification and drawing for final handover to NBCC / Client at

their satisfaction) Set 4,738.51 3.00 14,215.52

307 M.R. Providing, installing, testing & commisioning of fire brigade draw

out connection (fire department connection) with suction pipe

MS class 'C' 100 mm dia. & 100 mm dia. foot valve & steel chain

including wall mounted box M.S. construction with glass door to

house the above mentioned componenets. Set 14,227.39 - -

Work already executed by the previous agency Set 11,381.91 1.00 11,381.91

Balance work (Installation,testing and commissioning or any

other work as required complete in all respect as per

specification and drawing for final handover to NBCC / Client at

their satisfaction) Set 2,845.48 1.00 2,845.48

308 DSR' 14 Excavating trenches of required width for pipes, cables, etc

ITEM NO including excavation for sockets, and dressing of sides, ramming

2.10 of bottoms, depth upto 1.5 m including getting out the excavated

soil, and then returning the soil as required, in layers not

exceeding 20 cm in depth including consolidating each

deposited layer by ramming, watering, etc. and disposing of

surplus excavated soil as directed, within a lead of 50 m :

2.10.1 All kinds of soil - -

2.10.1.2Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300

mm dia. Cum 208.30 - -

309 DSR,14 Providing and fixing up to floor five level precast cement

ITEM NO concrete string or lacing courses, copings, bed plates, anchor

4.5 blocks, plain window sills, shelves, louvers, steps, stair cases,

etc. including hoisting and setting in position with cement mortar

1:3 (1 Cement : 3 coarse sand), cost of required centering,

shuttering and finishing smooth with 6mm thick cement plaster

1:3 (1 Cement : 3 fine sand) on exposed surfaces complete.

4.5.2 1:2:6 (1 cement : 32coarse sand : 6 graded stone aggregate

20mm nominal size). Cum 6,269.80 - -

310 DSR'14 Constructing masonary chamber 90 x 90 x100 cm. inside with

Item common burnt clay F.P.S. (non modular) brick of designation 75

18.34.1 mm in cement mortar 1:4 ( 1 cement : 4 fine sand) for sluice

valve with CI surface box 100 mm top dia. 160 mm bottom dia.

And 180 mm deep (inside) with chained lid and RCC top slab

1:2:4 mix ( 1 cement : 2 coarse sand : 4 graded stone aggregate

20 mm nominal size) necessary excavation foundation concrete

1 :5 :10 (1 cement : 5 fine sand : 10 graded stone aggregate 40

mm nominal size and inside plastering with 1:3 (1 cement : 3

coarse sand) 12 mm thick finished with a floating coat of neat

cement complete as per standard design with FPS bricks

311 18.59 Providing and fixing C.I. double acting air valves of approved

quality with bolts, nuts, rubber insertions etc. complete ( The tail

pieces, tapers etc. if reqd. will be paid separately) - -

312 18.31 Providing & Fixing C.I.sluice valve(with cap) complete with