WC-003/22-23 SIVANTHIPATTI FEEDER SDNR

Amount

Excavation of Stay pit 4.5' to 5' depth by using JCB or manual

Excavation of pole pit upto 8 mtr PSC poles by using JCB or manual

Excavation of pole pit upto 9.14 mtr Pole by using JCB or manual

Excavation of RSJ pole pit above 36' by using JCB or manual

Erection of 8 mtr PSC poles by using JCB or maual

Erection of 9 mtr PSC poles by using JCB or maual

Erection of RSJ Rail, fabricated poles above 36'-0' by using JCB or maual

Erection of stay set complete

Fixing of 3.6" "V" cross arms(all types) / channel cross arms/ guarding Cross arms

Tapping X arm

Fixing of LT 3 phase cross arms

Fixing of LT Single phase cross arms

Fixing of HT/LT TI Fittings

Fixing of pin Insulators with Pin 11 KV

Fixing of 11 KV strain disc.

Fixing of LT pin Insulator with pin

Fixing of LT shackle

Fixing of Aluminium Knob

Earthing of pole with pin including burying looping and binding

Paving of Conductor, stringing, binding Jumpering etc., complete with 7/4.09ACSR for both HT/LT lines with LC work.

Paving of Conductor, stringing, binding Jumpering etc., complete with 7/4.09ACSR for both HT/LT lines without LC work.

Paving of Conductor, stringing, binding Jumpering etc., complete with7/3.35 mm ACSR for both HT/LT lines with LC work.

Paving of Conductor, stringing, binding Jumpering etc., complete with7/3.35 mm ACSR for both HT/LT lines without LC work.

Paving of Conductor, stringing, binding Jumpering etc., complete with7/2.59 mm ACSR for both HT/LT lines with LC work.

Paving of Conductor, stringing, binding Jumpering etc., complete with7/2.59 mm ACSR for both HT/LT lines without LC work.

Concreting of Poles as per Board standards (2*2*5). The material such as sand, jelly, etc., have to be supplied by contractor including Cement supplied by Contractor (Cement concrete mix 1:4:8 using 40mm hard broken stone including cost of labour Charges for placing Transporting of Sand, jally, from box and water curing etc,. complete as per field Engineer's instructions.

Erection of Single Pole Transformer structure complete in all respects with wiring Earthing, fixing of open type fuse units, HT/LT/LAS and jumpering 3 Nos. Earth pits with tubs including painting of metal parts, structure poles, fixing of top channel seating channel, belting angle (Except erection of Transformer)

Erection of Single Pole Transformer structure complete in all respects with wiring Earthing, fixing of open type fuse units, HT/LT/LAS and jumpering 3 Nos. Earth pits with tubs including painting of metal parts, structure poles, fixing of top channel seating channel, belting angle (Except erection of Transformer)

Flat guarding arrangement 4wire

Transport of poles/Materials/ conductors and other materials from store to site ( for Hired Vehicle) beyond 20KM

Loading/Unloading of poles upto 8 mtr PSC poles

Loading/Unloading of poles upto 9 mtr PSC poles & RCC Square Pole

Loading/Unloading of poles above 42'-0' RSJ pole

Transporting of 8mt poles from road site to pole pit including loading and unloading of poles by using JCB or manual

Transporting of 9.0mt poles & 9.0mt RCC Square Pole from road site to pole pit including loading and unloading of poles by using JCB or manual

Transporting of poles above 42'-0' RSJ polefrom road site to pole pit including loading and unloading of poles by using JCB or manual

Transporting of Distribution Transformer beyond 20 KM

Loading or unloading of Transformer upto 63 KVA for each

Loading or unloading of Transformer upto 25 KVA for each

Erection of New Transformer upto 63 KVA

Erection of New Transformer upto 25 KVA

Erection of D.P. structure with AB switch top channel, cross bracing, HG fuse set, earthing, painting, providing stay and pole concreting as per field Engineer's instructions.

Alteration of Back clamp

Painting & Numbering of poles

Aluminium painting including labour,materials,lead,lift etc., for all types of x arm/channel/clamps/Bolt & Nut Etc., for above works

E.P.F. @13 % should be Entered by the Bidder

E.S.I. @3.25 % should be Entered by the Bidder

G.S.T. @18% should be Entered by the Bidder