Provision of New Bore Well near Patel road and Water pipeline and Sluice Valve connected to Overhead Tank pipeline at OCFS Estate.

Excavating in trenches n.exe.1.5m wide and n.exe.1.5m in depth for foundation, getting out soft & loose soil.

M&L broken brick hardcore of gauge n.exc 63mm , deposited , spreaded and levelled in layers n.exc. 15cm thick watered and rammed to a true surface

M&L Cement conerete in foundations filling and mass concrete Type C2 1:3;6 (40mm stone aggregate).

Reinforced cement concrete type B-1 1:2:4 (20 mm graded aggregate) in columns ,pillars ,piers, posts and struts.

Reinforced cement concrete type B-1 1:2:4 (20 mm graded aggregate) in foundations including rafts footings foundation beams plinth beam base for columns etc

Reinforced cement concrete type B-1 1:2:4 (20 mm graded aggregate) in beams cantilevers, lintels over 1.5m span.

Reinforced cement concrete type B-1 1:2:4 (20 mm graded aggregate) in slab( flat & Inclined) supported on walls beams and columns in floors, roofs, landings.

M&L M.S. Bars 10 mm dia or over, cut to lenth, bent to shape and binding with M.S. wire as required/directed.(TMT bars).

M&L Mild steel bars 6mm dia to 8mm dia, cut to length,bent to shap required, including cranking,bending and binding with mild steel wire (annealed) not less then 0.9mm dia. (TMT bars).

Form work to side of concrete foundation footings base of columns plinth beam etc.flat rough finished surface of concrete.

Formwork to sides and soffits of roof beams, beam haunchings, cantilevers, etc, flat rough finished surfaces of concrete.

Form work to sides of square,rectangular or polygonal pillars, posts struts, piers, columns and stanchions flat rough finished surfaces of concrete.

Formwork to soffits of suspended slabs as flat roof slabs (Horijontal or sloping), fair finished surfaces of concrete.

M&L for brick work with sub class 'A' bricks straight or curved on plan exc. 6m mean radius built in 1:4 mix cement mortar using 100% coarse sand.

Rendering 12mm thick cement plaster in 1:4 mix cement mortar on walls.

Providing 70 mm Cement concrete type B-0, 1:2:4 (12.5mm graded aggregate)finishing cement concrete surface even and smooth without using extra cement concrete.

S/F of MS framed work for cladding glazing and like fixed with angle cleats and connecvting plates.Fe-290 (Gde E-165).

S&F of Mild steel,1.60mm thick plain,black sheet in wall cladding,steel gates and similar work, cut to size,holes punched,including round headed screws,clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required

M&L for steel rolling shutters, with out ball bearing, as specified thickness of laths in 1mm including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or manual type.

S&F of Butt hinges , heavy weight cold rolled mild steel 125m size.

S&F Aluminium anodised, barrel tower bolts of extruded section and fixed 200 mm size.

S&F Aluminium handles, cast type, anodised 100 mm size.

S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed 200 mm size.

S&F of steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded.

S&F of steel ventilators, fixed type, with glazing bars.

Sand filling under floors or in foundations including watering and consolidation

M&L of machine cut kota stone slab flooring 40-50mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete

S/F of light shed Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match.

S&F Non - skid Ceramic white tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match

Providing screed bedding layer of mortor 25 mm thick for laying floor finish 1:4 ratio.

S&F Glazed ceramic joint free colour tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match.

S&Fixing in repair of vitreous china squatting pan of "Orissa" patterns size 580X440 mm white with integral footrest(excluding flushing cistern)"P" or "S" trap front or back inlet of any pattern including lime concrete bedding connection to trap & flushing pipe including trap set,including flush pipe of polyethene of low level of PVC 32 mm dia & concrete bedding & making good to floor.

S/Fixing in repair of PVC 10 litres valveless syphonic action type flushing cistern low valve white with inlet ball valve float and handle including brackets.

S&F PVC connections 15mm size with PTMT nuts of length 300mm.

S&F of fancy type 15mm Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule.

S&F PVC(SWR) pipe single socketed in any length with rubber ring joints, fixed to walls 110mm bore.

S&F of bends PVC(SWR) 110mm bore.

S&F of junction single(single T), equal,or unequal,110mm bore.

S&F stop valve but fancy type, chromium plated serewed down high pressur with butterfly handle serewed both ends for Iron pipe or for union & fixed 15mm of bore.

S&F High density polyethylene pipes (HDPE) of pressure rating 6 kgf/cm2 laid in trenches 15mm with all fittings.

S&F High density polyethylene pipes (HDPE) of pressure rating 6 kgf/cm2 laid in trenches 25mm with all fittings.

S&F Vitreous China Wash basins, white,flat back, size 580X450 mm including cutting for and pinning in ends of brackets.

S&F of 15mm bore fancy type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed