Annual Maintenance ( Oiling & Greasing ) of Gates & Hoisting System of different Sites under Irrigation Mechanical Embankment Sub ? Division Jamui . Fabrication/Supplying / Fitting /Fixing of Canal Gates with Hoisting System , Hoist Platform & Groove Channel at Anjan Dam ( CH-90 ) & Escape gate of Anjan Dam under Irrigation Div- Laxmipur , Navinagar & Katari Canal under Irrigation Div-Sheikhpura , Sharma Distributory under Irrigation Div- Sikandra . And other miscellaneous repair work at Diha , Sohadi, Maninda, Chor Dargah Weir under Irrigation Div-Sheikhpura .

Short e-Re-NIT NO.- 7 / 2026-27 Group-3 TECHNICAL BID

Name of Work Annual Maintenance ( Oiling & Greasing ) of Gates & Hoisting System of different Sites under Irrigation Mechanical Embankment Sub – Division Jamui . Fabrication/Supplying / Fitting /Fixing of Canal Gates with Hoisting System , Hoist Platform & Groove Channel at Anjan Dam ( CH-90 ) & Escape gate of Anjan Dam under Irrigation Div- Laxmipur , Navinagar & Katari Canal under Irrigation Div-Sheikhpura , Sharma Distributory under Irrigation Div- Sikandra . And other miscellaneous repair work at Diha , Sohadi, Maninda, Chor Dargah Weir under Irrigation Div-Sheikhpura . Cost of Work as per BOQ Rs. 25,47,631 Time of Completion 25 Days

Sl No. Items Requirement

Name of Contractor

Address of the Contractor

1 Earnest Money (A) Bank Guarantee Amount to be entered ( In Rs.)

(B) Internet Payment Gateway (Credit/Debit Card ) , Net Banking , NEFT/RTGS Amount to be entered ( In Rs.)

Bid Security Amount - ( in Rupee) Rs. 51,100

2 Registration (Class-III)

5 PAN Card . No.

6 Factory License

7 Workshop certificate

8 List of Techanical Staffs

9 List of Machineries available in workshop

10 Bid Validity 120 days

11 NOC for Debar & Black Listing Affidavit

13 Character Certificate

14 Any other relevant document (If any)

Executive Engineer I.M.D. Bounsi

e-RE-NIT-7/2026-27 Gr- 3

Name of Work:- Annual Maintenance ( Oiling & Greasing ) of Gates & Hoisting System of different Sites under Irrigation Mechanical Embankment Sub – Division Jamui . Fabrication/Supplying / Fitting /Fixing of Canal Gates with Hoisting System , Hoist Platform & Groove Channel at Anjan Dam ( CH-90 ) & Escape gate of Anjan Dam under Irrigation Div- Laxmipur , Navinagar & Katari Canal under Irrigation Div-Sheikhpura , Sharma Distributory under Irrigation Div- Sikandra . And other miscellaneous repair work at Diha , Sohadi, Maninda, Chor Dargah Weir under Irrigation Div-Sheikhpura .

UNDER HEAD 2700

ESTIMATED COST:- RS. 2547631

EARNEST MONEY:- RS. 51,000

COST OF BOQ:- RS. 5000

Annual maintenance ( oiling and greasing) of Gates & Hoisting System under irrigation mechanical embankment sub division, jamui ( Section : -Jamui2, Sheikhpura).

S.NO. MATERIAL DISCRIPTION QUANTITY UNIT. RATE(RS.) AMOUNT(RS.)

1 Over hauling oiling and greasing for hoisting arrangement (mix. Of 70% mobil and 30% greasing of standerd quality ) cleaning and washing of checknut and screw rod & steel balls by k-oil/ HSD and also replacement of damaged steel balls and again refitting the same for smooth working of gate with all taxes ,labour and materials all complete as per specification and direction of E/I (A).irrigation div.sheikhpura & laxmipur (i) H/R , C/R & Escape gates (spindle with checknut) -82 nos. 82 Each 971 79622.00

(ii) winch crab with wire rope attached hoisting arrrangement. - 12 nos 12 Each 1803 21636.00

(iii) Gear and pinion speed reduction with counter weight and rope drum attached hoisting arrangement.- 2 nos 2 Each 5495 10990.00

(iv) gear box with and pinion for worm wheel hoisting arrangement. 4nos. 4 Each 4313 17252.00

Annual maintenance ( oiling and greasing) of Gate and hoisting system under irrigation mechanical embankment sub division, jamui (section1 & sikandra2).

S.NO. ITEM OF WORK QUANTITY UNIT. RATE(RS.) AMOUNT(RS.)

1 Over hauling oiling and greasing for hoisting arrangement (mix. Of 70% mobil and 30% greasing of standerd quality ) cleaning and washing of checknut and screw rod & steel balls by k-oil/ HSD and also replacement of damaged steel balls and again refitting the same for smooth working of gate with all taxes ,labour and materials all complete as per specification and direction of E/I (A). irrigation civil division sikandra (i) H/R , C/R & Escape gates (spindle with checknut) -77 nos. 77 Each 971 74767

(ii) winch crab with wire rope attached hoisting arrrangement. - 12 nos 6 Each 1803 10818

(iii) Gear and pinion speed rerduction with counter weight and rope drum attached hoisting arrangement.- 2 nos 5 Each 5495 27475

(iv) gear box with and pinion for worm wheel hoisting arrangement. 4nos. 9 Each 4313 38817

Repair at Sohadi & Chor Dargah Weir

S.NO. ITEM OF WORK QUANTITY UNIT. RATE(RS.) AMOUNT(RS.)

1 Cutting & Removing of Existing Roller Track & Bottom Seal at Sohadi Weir with all Labour , Material , Tools & Machinaries and all necessary jobs as per directions & Specification of E/ 1 Per day 3320 3320.00

2 Fabrication/ Supplying/Fixing and erection of Roller Path & Bottom Seal at Sohadi Weir with Bottom Seal made of ISMB 250 and Roller Path made of ISMC 200X75 and Anchoring with 20mm dia MS Rod with all Labour , Material , Tools & Machinaries and all necessary jobs as per directions & Specification of E/I . 12.5 Per m 4902 61275.00

3 Fabrication/supplying/fitting/fixing of tie rod 4’2’’ long made of 25mm dia of MS rod, with MS flat 50X6 at one end to fix with khutti along with nuts & bolts with all accessories including cost of material, labour, machineries, cutting, welding, finishing, fixing and all complete work as per specification and directions of E/I. No of tie rods = 5 nos. (Sohadi weir ) 5 Each 1006 5030.00

4 Fabrication/ S/F/F of M.S. Flat 63 mm wide X16 mm thick and 300mm long of 25mm for fixing of tie rod at one end with all complete job as specification and direction of E/I. No of khutti = 5 nos. (Sohadi weir ) 5 Each 374 1870.00

5 Supplying/Fitting /Fixing of Pulley of dia 200mm with groove width sufficient for fixing of wire rope of 20mm dia and all complete material like pin , shaft with all Labour , Material , Tools & Machinaries and all necessary jobs as per directions & Specification of E/I . 4 Each 4367 17468.00

6 Providing and laying P.C.C. M150 with nominal mix (1:2:4) in foundation of various components of canal or embankment structures with approved quality of graded coarse aggregate of required grade and approved quality of sand of requisite F.M. washed and screened including necessary tools and plants , vibrating , curing , royalty etc excluding cost of form work as well reinforcement its cutting , bending , binding and placing complete job as per specification and direction of E/I.( WRD 5.3.4 ) 0.75 per m3 6554.42 4915.81

7 Carraige of Materials

A. Cement 5km lead 0.241 MT 520.4 125.41

B. Sand 5km lead 0.336 Cum 320.96 107.84

C. Aggregate stone chips 5 km lead 0.675 Cum 228.06 153.94

Repair at Diha Weir And Maninda Weir

S.NO. MATERIAL DISCRIPTION QUANTITY UNIT. RATE(RS.) AMOUNT(RS.)

1 Fabrication and erection of 63mm dia. screw rod for 1nos. H/R gate at Diha & Maninda Weir with all material & labour all complete job as per specification direction of E/I. 3.5M X 2 NOS = 7 M 7 Per m 4569 31983

2 Fabrication and erection of C.I Hexagonal Check nut of 63 mm for 2 no H/R gate with all material labour and carries all complete job as per spen dirn of E/I 2 Each 27022 54044

3 Fabrication/supplying/fitting/fixing of tie rod 4’2’’ long made of 25mm dia of MS rod, with MS flat 50X6 at one end to fix with khutti along with nuts & bolts with all accessories including cost of material, labour, machineries, cutting, welding, finishing, fixing and all complete work as per specification and directions of E/I. No of tie rods = 5 nos. (Diha weir ) + 10 nos.( Maninda weir ) = 15 nos. 15 Each 1006 15090

4 Fabrication/ S/F/F of M.S. Flat 63 mm wide X16 mm thick and 300mm long of 25mm for fixing of tie rod at one end with all complete job as specification and direction of E/I. No of khutti = 5 nos. (Diha weir ) + 10 nos.( Maninda weir ) = 15 nos. 15 Each 374 5610

KATARI & NAVINAGAR

S.NO. MATERIAL DISCRIPTION QUANTITY UNIT. RATE(RS.) AMOUNT(RS.)

1 Extraction of old damaged gate by jugar or any other mechanical means and Clearing of site before and after completion of work. 3 NO'S 1831 5493.00

2 F/S/F/F of 1 no C/R gate of Katari Canal gate with ISMC 100 as frame and horizontal, vertical stiffner and MS plate 8mm thick with ISA 75X75X10 as lifting lug with all material labour and carries all complete job as per specification and directions of E/I . 1 nos x 2.795 m2= 2.795 m2 2.795 /m2 20448.95 57154.81

3 F/S/F/F of groove channel for Katari C/R gates made up of ISMC125 of length 3m made of ISMC 125 on each and all material labour and carries all complete job as per specification and direction of E/I 6 /m 2769.96 16619.76

4 F/S/F/F of 2 no H/R gate at Navinagar with ISMC 100 as frame and horizontal, vertical stiffner and MS plate 8mm thick with ISA 75X75X10 as lifting lug with all material labour and carries all complete job as per specification and directions of E/I . 2 nos x 2.22 m2= 4.44 m2 4.44 /m2 21656.99 96157.04

5 F/S/F/F of groove channel for two H/R gates at Navinagar made up of ISMC125 of length 2m on each side and Middle Separator made of ISMC 125 of 2m each and all material labour and carries all complete job as per specification and direction of E/I 11.2 /m 2540.59 28454.61

6 Fabrication and erection of 63mm dia. screw rod for 1nos. C/R gate at katari canal and 2nos. H/R gate at Navinagar with all material & labour all complete job as per specification direction of E/I. 3.5M X 3 NOS = 10.5 M 10.5 /m 4569 47974.50

7 Fabrication and erection of C.I Hexagonal Check nut of 63 mm for 2 no H/R gate& 1no.C/R gate with all material labour and carries all complete job as per specification direction of E/I 3 Each 27097.22 81291.66

8 Fabrication/ Fitting / Fixing of Platform at Katari canal gate with Top Runner made of two nos. ISMB 200 with Chequered plate for platform and ISMC100 as frame for the platform and Railing from three sides over the platform with all material , labour and all complete job as per spen dirn of E/I 3.5 /m2 26199.54 91698.39

9 Fabrication/ Fitting / Fixing of Platform at Navinagar canal gate with Top Runner made of two nos. ISMB 200 with Chequered plate for platform and ISMC100 as frame for the platform and Railing from three sides over the platform with all material , labour and all complete job as per specification direction of E/I 5.4 /m2 23386.59 126287.59

10 Providing and laying P.C.C. M150 with nominal mix (1:2:4) in foundation of various components of canal or embankment structures with approved quality of graded coarse aggregate of required grade and approved quality of sand of requisite F.M. washed and screened including necessary tools and plants , vibrating , curing , royalty etc excluding cost of form work as well reinforcement its cutting , bending , binding and placing complete job as per specification and direction of E/I.( WRD 5.3.4 ) 5.61 /m3 6554.42 36770.30

11 Carraige of Materials

A. Cement 5km lead 2.35 MT 520.4 1222.94

B. Sand 5km lead 2.41 Cum 320.96 773.51

C. Aggregate stone chips 5 km lead 4.82 Cum 228.06 1099.23

AANJAN CH-90 & ESCAPE

S.NO. MATERIAL DISCRIPTION QUANTITY UNIT. RATE(RS.) AMOUNT(RS.)

1 F/S/F/F of 2nos. Canal gate at CH 90.0 with ISMC 100 as frame and horizontal, vertical stiffner of ISMC 75X40 and MS plate 8mm thick with ISA 75X75X10 as lifting lug & SS plate with all material labour and carries all complete job as per specification and directions of E/I . 2 nos x 1 m2= 2 m2 2 /m2 27231 54462.00

2 F/S/F/F of groove channel for Canal gates at CH90 of Left Main Canal made up of Fabricated plate of thickness 10 mm of length 3m on Each Side & ISMB 200 as bottom seal & S.S. plate in groove with all material labour and carries all complete job as per specification and direction of E/I 2nos X 7.25m = 14.50m 14.5 /m 6113 88638.50

3 F/S/F/F of 2 no Escape gates of Anjan Dam of Size 1.82m X 1.61m with ISMC 125 as Vertical and horizontal frame , ISMC 100 as vertical stiffner & intermediate Horizontal Girder and MS plate 8mm thick with ISA 75X75X10 as lifting lug with all material labour and carries all complete job as per specification and directions of E/I . 2 nos x 2.93 m2= 5.86 m2 5.86 /m2 22298 130666.28

4 F/S/F/F of Fabricated groove channel for Escape gate of Anjan Dam with 10mm thick MS Plate and S.S. plate on one side and necessary Anchoring with 20mm dia MS rod at equal intervals with all material labour and carries all complete job as per specification and direction of E/I 8m /gate X 2nos = 16 m 16 /m 6857.54 109720.64

5 Fabrication and erection of 63mm dia. screw rod for 2nos. Canal gate at CH90 of LEFT Main Canal and 2nos. ESCAPE gate of Anjan Dam with all material & labour all complete job as per specification direction of E/I. 3M X 4 NOS = 12 M 12 /m 4569 54828.00

6 Fabrication and erection of C.I Hexagonal Check nut of 63 mm for 2 no H/R gate& 1no.C/R gate with all material labour and carries all complete job as per spen dirn of E/I 4 Each 27097 108388.00

7 Fabrication/ Fitting / Fixing of Platform at CH 90 of Left Main Canal of Anjan Dam with Top Runner made of two nos. ISMB 200 with Chequered plate for platform and ISMC100 as frame for the platform and Railing from three sides over the platform with all material , labour and all complete job as per spen dirn of E/I 3.5 /m2 26199.55 91698.42

8 Fabrication/ Fitting / Fixing of Platform at Escape gate with Top Runner made of two nos. ISMB 200 with Chequered plate for platform and ISMC100 as frame for the platform and Railing from three sides over the platform with all material , labour and all complete job as per spen dirn of E/I 5.16 /m2 23506.99 121296.07

9 Providing and laying P.C.C. M150 with nominal mix (1:2:4) in foundation of various components of canal or embankment structures with approved quality of graded coarse aggregate of required grade and approved quality of sand of requisite F.M. washed and screened including necessary tools and plants , vibrating , curing , royalty etc excluding cost of form work as well reinforcement its cutting , bending , binding and placing complete job as per specification and direction of E/I. 0.771 /m3 6554.42 5053.45

10 Carraige of Materials

A. Cement 5km lead 0.248 MT 520.4 129.05

B. Sand 5km lead 0.346 Cum 320.96 111.05

C. Aggregate stone chips 5 km lead 0.693 Cum 228.06 158.04

SHARMA DISRIBUTARY AT CHAIN NO.150 NEAR KAKAN VILLAGE UNDER IRRIGATION DIVISION SIKANDRA

S.NO. MATERIAL DISCRIPTION QUANTITY UNIT. RATE(RS.) AMOUNT(RS.)

1 Fabrication,suppling,fitting,fixing of M.s gate of size 1.0m x1.50m -01 no. and ISMC- 100x50mm gate frame,horizantal girder, vertical stiffener and 8mm thick skin plate and seal of s.s plate- 60x8mm welded in both side of gate and musical rubber seal back side ,top and bottom frame with all labour and materials ,all taxes complete job as per specification and direction of E/I. 1.5 sq m 29001 43501.50

2 Fabrication,suppling,fitting,fixing & installation of fabricated side channel made of 10mm thick m.s plate welded togher to form a chanal with vertical s.s plate 60x8mm in both side in chanal with all taxes,labour & materials all Complete job as per specification and direction of E/I 6 m 8311.84 49871.04

3 Fabrication,suppling,fitting and fixing of top and bottom seal beam made 200 x 100 mm with ancroing by 16mm dia m.s rod and seal of s.s plate 60x8mm welded in Top seal and bottom seal with all taxes,labour & materials all Complete job as per specification and direction of E/I 2 m 5734 11468.00

4 Fabrication,supplying,fitting and fixing of main Hoisting beam ISMB-200x100 mm and cross and support ISMC-100x50mm ,ISA65X65X6m railing and railing post made and with anchoring by 16 mm dia ms rod and 6mm thick chequered plate for hoisting plateform with all taxes materal labour all complete job as per specification and direction of E/I 2 m2 34527 69054.00

5 Fabrication,supplying,fitting and fixing of stair of main beam ISA-75X75X10mm Railing post and Railing two rows ISA-65X65X6mm, step ISA-40x40x6mm and with anchoring by 16 mm dia ms rod and 6mm thick chequered plate for step with all taxes materal labour all complete job as per specification and direction of E/I 2.4 m2 27281 65474.40

6 Fabrication & erection of 63mm dia M.S screw rod with 2TPI threaded for low level sluice gate with all labour & materials all taxes. Complete job as per specification and direction of E/I 2 m 4669 9338.00

7 Fabrication and erection o f C.I Hexagonal checknut 63mm dia for low level small H/R gates with internal G.M bush fitted M.S base plate including M.S operating handle with all taxes labour and materals complete job as per specification and direction of E/I 1no.gatex1set 1 Each 27022 27022.00

8 supplying, fitting and fixing flat rubber seal 100x12mm size with clamp made of m.s flat 60x6 mm tightend with counter shunk bolt with all labour and material all complete job as per specification and direction of E/I 1 m 900 900.00

9 Supplying, Fitting and Fixing musical rubber seal on top and side of the gate 4" x1/2" 45 mm dia note with size with counter shunk bolt all complete job as per specification and direction of E/I 4 m 1134 4536.00

10 Cleaning of site from mud and disposal of waste material before starting work and complition of work as per direcion of E/I Total -1no.gate x 2 time 2 Each 853.3 1706.60

11 Providing laying P.C.C /R.C.C M-150 with nominal mix of (1:2:4) in super structure of various component of canal or embankment structure with approved quality sand of requisite F.M washed & screened including necessary tools and plant vibrating, curing royality and all taxes etc excluding cost of form work as well as reinforcement to cutting, binding, and placing Complete job as per specification and direction of E/I 1.546 Cum 6554.42 10133.13

12 carriage of materails

A cement AV Lead5 km 0.508 MT 554.2 281.53

B Sand AV Lead 5 KM 0.696 Cum 1123.31 781.82

C Stone chips AV Lead 90 KM 1.391 Cum 2979.38 4144.32

TOTAL WORK VALUE(Rs.) = Sum Total of part-A,Part-B, Part- C, Part-D, Part- E, Part-F &Part- G Rs. 2136729.18 I

Add Seignorage fees (Part-C, Part-E, Part-F, Part-G) Rs. 912.44 II

Add 1% L. Cess of (I) Rs. 21367.29 III

Total (I +II +III) Rs. 2159008.91 IV

Add G.S.T. of (IV) Rs. 388621.60 V

Total (IV + V) Rs. 2547630.52

Say Total Amount = Rs. 2547631.00

Executive Engineer

Irrigation Mechanical Division Baunsi