Electrical work for Improvement of old non functional CSY well by providing new DI 300 Dia pipe line with st.structure near CSY halt with 200000G ground reservoir under SSEE/HT/PUMP at Kharagpur.

A-Electrical work for Improvement of old non functional CSY well by

Supply, Installation, Testing & Commissioning Set of HT panel made of Powder Coated CRCA Sheet Steel of thickness (minimum): 2mm with Ingress Protection: IP 53 or higher consisting of 12KV, 40KA, 800 Amps Indoor type Incoming Microprocessor based VCB-01 Nos. (CT ratio 200/100/50/5) and 12KV, 40KA, 800 Amps Indoor type Outgoing microprocessor based VCB.-02 Nos. (CT ratio 200/100/50/5) with all other accessories i.e. Power Pack, Battery and SMPS Battery Charger, complete set of digital ammeter, voltmeter, multifunctional meters, led indicator, CT, PT, Protective relay etc. with suitable metallic enclosure and complete wiring to complete the job with 1250Amp capacity Cu. Bus-Bar and with Electrical and Manual Mechanical interlocking facilities.

Supply with testing of Indoor Type LT Panel Set made of Powder Coated CRCA Sheet Steel of thickness (minimum): 2mm with Ingress Protection: IP 53 or higher consisting with 4- pole Draw-out ACB 800 A, 50KA, Microprocessor Based SR18G, MDO type - 02 Nos. as incoming, 4-pole Draw-out ACB 800 A, 50KA, Microprocessor Based SR18G, MDO type - 01 No. as Bus-Coupler and 4-pole 400A 50kA microprocessor based MCCB -02 nos., 4- pole 250A 36kA microprocessor based MCCB - 02 nos., 4-pole 100A 36kA microprocessor based MCCB -02 nos. and 4-pole 63A, 10kA MCB with 4PP -02 nos. as outgoing with suitable Cu. Bus bar, Digital Multifunctional Meter in all Incoming & Outgoing ACB & MCCB, Capable to measure and display Voltage, Current, Frequency, Power factor, kW, kVAR, kWh, kVAh, kVARh etc., appropriate spreader link for MCCB, Automatic Fire Ball, Insulating Mats and with necessary item for seal the cable entry and outgoing point duly conforming PCEE/SER/GRC Specification of LT Distribution Panel as applicable with Description No. SER/ELEC/GS/ DESCRIPTION/LT PANEL/1/REV- 2/JUNE 2025, Dtd.16/06/2025.

Fixing and commissioning of Indoor Type LT Set Panel made of Powder Coated CRCA Sheet Steel of thickness (minimum): 2mm with Ingress Protection: IP 53 or higher consisting with 4-pole Draw-out ACB 800 A, 50KA, Microprocessor Based SR18G, MDO type - 02 Nos. as incoming, 4-pole Draw-out ACB 800 A, 50KA, Microprocessor Based SR18G, MDO type - 01 No. as Bus-Coupler and 4-pole 400A 50kA microprocessor based MCCB -02 nos., 4- pole 250A 36kA microprocessor based MCCB - 02 nos., 4-pole 100A 36kA microprocessor based MCCB -02 nos. and 4-pole 63A, 10kA MCB with 4PP -02 nos. as outgoing with suitable Cu. Bus bar, Digital Multifunctional Meter in all Incoming & Outgoing ACB & MCCB, Capable to measure and display Voltage, Current, Frequency, Power factor, kW, kVAR, kWh, kVAh, kVARh etc., appropriate spreader link for MCCB, Automatic Fire Ball, Insulating Mats and with necessary item for seal the cable entry and outgoing point and all other Civil work and accessories to complete job. PROJECT-KGP-ELECTRICAL/SOUTH EASTERN RLY

Supply with testing of Indoor Type LT Panel Set made of Powder Coated CRCA Sheet Steel of thickness (minimum): 2mm with Ingress Protection: IP 53 or higher consisting with 4- pole 630A 50kA microprocessor based MCCB - 01 No. as incoming and 4-pole 250A 36kA microprocessor based MCCB- 04 Nos, 4-pole 63A 36kA microprocessor based MCCB- 04 Nos as outgoing with suitable Cu. Bus bar, Digital Multifunctional Meter in all Incoming & Outgoing MCCB, Capable to measure and display Voltage, Current, Frequency, Power factor, kW, kVAR, kWh, kVAh, kVARh etc., appropriate spreader link for MCCB, Automatic Fire Ball, Insulating Mats and with necessary item for seal the cable entry and outgoing point duly conforming PCEE/SER/GRC Specification of LT Distribution Panel as applicable with Description No. SER/ELEC/GS/ DESCRIPTION/LT PANEL/1/REV- 2/JUNE 2025, Dtd.16/06/2025.

Fixing and commissioning of Indoor Type LT Set Panel made of Powder Coated CRCA Sheet Steel of thickness (minimum): 2mm with Ingress Protection: IP 53 or higher consisting with 4-pole 630A 50kA microprocessor based MCCB - 01 No. as incoming and 4-pole 250A 36kA microprocessor based MCCB- 04 Nos, 4- pole 63A 36kA microprocessor based MCCB- 04 Nos as outgoing with suitable Cu. Bus bar, Digital Multifunctional Meter in all Incoming & Outgoing MCCB, Capable to measure and display Voltage, Current, Frequency, Power factor, kW, kVAR, kWh, kVAh, kVARh etc., appropriate spreader link for MCCB, Automatic Fire Ball, Insulating Mats and with necessary item for seal the cable entry and outgoing point and all other Civil work and accessories to complete job.

Supply with testing of Indoor Type LT Panel Set made of Powder Coated CRCA Sheet Steel of thickness (minimum): 2mm with Ingress Protection: IP 53 or higher consisting with 4- pole 250A 36kA microprocessor based MCCB - 01 No. as incoming and 4-pole 63A 36kA microprocessor based MCCB- 06 Nos as outgoing with suitable Cu. Bus bar, Digital Multifunctional Meter in all Incoming & Outgoing MCCB, Capable to measure and display Voltage, Current, Frequency, Power factor, kW, kVAR, kWh, kVAh, kVARh etc., appropriate spreader link for MCCB, Automatic Fire Ball, Insulating Mats and with necessary item for seal the cable entry and outgoing point duly conforming PCEE/SER/GRC Specification of LT Distribution Panel as applicable with Description No. SER/ELEC/GS/ DESCRIPTION/LT PANEL/1/REV- 2/JUNE 2025, Dtd.16/06/2025. PROJECT-KGP-ELECTRICAL/SOUTH EASTERN RLY

Fixing and commissioning of Indoor Type LT Set Panel made of Powder Coated CRCA Sheet Steel of thickness (minimum): 2mm with Ingress Protection: IP 53 or higher consisting with 4-pole 250A 36kA microprocessor based MCCB - 01 No. as incoming and 4-pole 63A 36kA microprocessor based MCCB- 06 Nos as outgoing with suitable Cu. Bus bar, Digital Multifunctional Meter in all Incoming & Outgoing MCCB, Capable to measure and display Voltage, Current, Frequency, Power factor, kW, kVAR, kWh, kVAh, kVARh etc., appropriate spreader link for MCCB, Automatic Fire Ball, Insulating Mats and with necessary item for seal the cable entry and outgoing point and all other Civil work and accessories to complete job.

Erection, testing and commissioning of Numbers Outdoor type transformer 250 KVA (as a new or in replacement), 11KV/415V, 3 phase, 50Hz, Oil cooled, copper wound complete with oil and other accessories including making of transformer plinth, brick walling and fencing as mentioned in GEN. Necessary tools/ropes/ man power are to be arranged by the Contractor. The cost also includes crane charges if required as per site condition.

Laying, supply at site, testing, drawl & Metre commissioning of HT cable underground along the road through cable trench as mentioned in explanatory note.

Laying of HT cable/cables across the road, Metre track, drain, concrete etc. through HDPE/GI/RCC pipe as mentioned in explanatory note.

Laying, supply at site, testing, drawl & Metre commissioning of HT cable on wall, PVC sleeve/Pipe as mentioned in explanatory note.

Supply of HT 11 KV Heat shrinkable type End Numbers Termination Kit Indoor type suitable for 3 x 95 Sq.mm Screened XLPE cable 11KV/E.

Fixing and commissioning of HT 11 KV Heat Numbers shrinkable type End Termination Kit Indoor type suitable for 3 x 95 Sq.mm Screened XLPE cable 11KV/E.

Supply of HT 11 KV Heat shrinkable type End Numbers Termination Kit Outdoor type suitable for 3 x 95 Sq.mm Screened XLPE cable 11KV/E.

Fixing and commissioning of HT 11 KV Heat Numbers shrinkable type End Termination Kit Outdoor type suitable for 3 x 95 Sq.mm Screened XLPE cable 11KV/E.

Supply of HT 11 KV Heat shrinkable Straight Numbers Through Joint Kit suitable for 3 x 95 Sq.mm Screened XLPE cable 11KV/E.

Fixing and Commissioning of HT 11 KV Heat Numbers shrinkable Straight Through Joint Kit suitable for 3 x 95 Sq.mm Screened XLPE cable 11KV/E.

Supply of 110mm Outer Dia. HDPE pipe of Metre Grade PE-100, PN 10 with all accessories like suitable couplers, plugs, end caps, spacer, T band etc. as mentioned in explanatory note.

Erection and commissioning of HDPE pipe of Metre any size with all accessories to complete job.

Laying of LT cable/cables in underground Metre along the road through cable trench etc. as mentioned in explanatory note. PROJECT-KGP-ELECTRICAL/SOUTH EASTERN RLY

Laying of LT cable/cables across the road, Metre track, drain through RCC/GI pipe as mentioned in explanatory note.

Laying of LT cable/cables on wall/structure Metre through PVC casing pipe of size 4inches or 3inches with accessories as mentioned in explanatory note.

Laying of extra cables in the excavated same Metre trench.

Transportation of cables (in rolls with or Each without wooden drums), poles and other materials and accessories from any store of Kharagpur Division to Work Site.

Supply, transportation and fixing of RCC Numbers 200.00 Cable Route Marker of size L-12", B-6" and H- 2.6" or as per site requirement with all accessories.

Supply, erection, testing and commissioning Set of LT XLPE cable gland made of Brass with aluminum lugs/sockets (4 Nos.) suitable for termination work of LT 4 Core X 16-25 sq. mm XLPE aluminum conductor armored cable.

Supply, erection, testing and commissioning Set of LT XLPE cable gland made of Brass with aluminum lugs/sockets (4 Nos.) suitable for termination work of LT 4 Core X 70-95 sq. mm XLPE aluminum conductor armored cable.

Supply, erection, testing and commissioning Set of LT XLPE cable gland made of Brass with aluminum lugs/sockets (4 Nos.) suitable for termination work of LT 4 Core X 185-300 sq. mm XLPE aluminum conductor armored cable.

Supply, fitment, testing and commissioning of Set LT Heat shrinkable type Straight Through Joint Kit suitable for 4 x 120-185 Sq.mm Screened XLPE LT U/G cable.

Supply of Strip Galvanized Perforated type Metre Cable Tray of Size- Width (minimum): 150mm, Height (minimum): 60mm, Thickness: 0.6mm or above based on OEM design as per support spacing, Having Slotted Rung Spacing with suitable accessories required to complete job as mentioned in explanatory note.

Laying and fixing of Strip Galvanized Metre Perforated type Cable Tray with all accessories mentioned in Explanatory Note to complete job.

Concealed Wiring of light and fan point by 1.5 Point Sq. mm, Single Core, Copper wire each for phase & neutral with 1.5 Sq. mm, Single Core, Copper wire for Earthing through PVC Conduit Pipe of Nominal Size 20mm/25mm (as per site requirement) including supply and fixing of all required materials like modular switch, socket, lamp holder, ceiling rose with suitable flush metal boxes, front plate etc. as per specifications mentioned in explanatory note.

Concealed Sub Circuit wiring by 2.5 sq. mm, Metre Single Core, Copper wire each for phase & neutral with 2.5 Sq. mm, Single Core, Copper wire for Earthing through PVC Conduit Pipe of Nominal Size 25mm including supply and fixing of all required materials like ceiling rose, suitable flush metal boxes, front plate etc. as per specifications mentioned in explanatory note. PROJECT-KGP-ELECTRICAL/SOUTH EASTERN RLY

Supply of Batten with 20 W LED tube light Numbers with Colour Rendering Index (CRI) >=80, confirming IP20 (with integrated electronic driver) as per specifications mentioned in explanatory note.

Fixing and Commissioning of any kind of Numbers Batten with 18W or higher wattage LED tube light with necessary accessories.

Supply of BEE: 5 Star rated High Speed BLDC Numbers Ceiling Fan, 1200 mm Sweep, Material of Blade- Aluminium, Motor winding material: Copper, Rated Voltage: 230V, 50Hz, Single phase AC with step type electronic fan regulator and necessary accessories as per specifications mentioned in explanatory note.

Fixing and commissioning of Ceiling Fan with Numbers 1200 mm Sweep, step type electronic fan regulator with necessary accessories to complete job.

Erection, Testing & Commissioning of VT Numbers Pump & Motor Set of Capacity 50,000 GPH with 100 HP Motor, suitable for 415V, 50Hz, 3- Phase power supply along with Soft Starter Panel, Column pipes, mandatory spares and accessories like Non-return valve with by-pass arrangement of suitable side at delivery end, Flanged type sluice valve of suitable size for delivery side, Delivery pressure gauge with cock, dial type of suitable capacity, Jaw flex type coupling, foundation nuts & bolts, Pressure Gauges as per site requirement. Cost includes the cost of all accessories to complete the work in all respect including foundation work & all other ancillary work (if required) cost includes the commissioning of motor, starter & Pump to complete the work in all respect.

Design, Manufacturing, Supply, Erection & Set Commissioning of 2 Ton Capacity SGEOT Crane along with- (i)Fabrication, Transportation on-site and Erection of LT Gantry line suitable for 01 no. of 02 Tons SGEOT Crane - bay length of 16 Mts (Each Side), (ii)Supply, Fabrication & Erection of SGEOT Gantry Way- Made of ISMB 200 mm with stiffeners/ Joint/ plates of 10 mm, with 40 mm Solid Bright Bar (ISMB-SAIL/JINDAL Make) 16m x 2No= 32m and (iii)Supply and Installation of DSL LT power feeding.

Supply of 15 HP Three Phase Energy Efficient Numbers Open Well Submersible Pump, Motor Capacity: 11.3 KW, 3Ph, 415V AC, Delivery Size 65-80mm or as per requirement of consignee, Head- 60-70Mtr or as per requirement of consignee, Conforming to IS: 8034- 2002 with all necessary items require for successful installation of pump as per site requirement and direction of consignee.

Supply of 20 HP fully automatic star-delta Set Starter Control Panel for 3-Phase Submersible Pump in powder coated CRCA sheet steel enclosure with necessary arrangement as mentioned in explanatory note.

Supply of Submersible flat cable of size 3 Metre Core x 6.00 Sq.mm PVC Insulated & PVC Sheathed Copper Conductor as mentioned in explanatory note. PROJECT-KGP-ELECTRICAL/SOUTH EASTERN RLY

Supply of Lead free UPVC Submersible Heavy Numbers 150.00 Duty Hi-Tech Hi-Tensile Biaxial Oriented Column Pipe (approximate Inner Dia- 80mm & Outer Dia- 90mm) or as per site and size requirement for the above mentioned Submersible Pump with suitable couplers, Length: 3Mtr per pipe, Pressure Bearing Capacity: 15 Kgf/Sq.cm or above as relevant per IS standard.

Supply of Nylon rope 25 mm dia. or as per Metre site and size requirement for the Submersible Pump, Conforming to relevant IS.

Lowering, commissioning of Open-well Submersible Pump with all accessories with reducing socket, Stainless Steel nut-bolt as per site requirement to complete job of pump with all accessories.

Supply of 5M HDG (Hot Dip Galvanized) Numbers Octagonal Pole with cable junction compartment, Pole top dia. 70mm, bottom dia. 130mm, sheet thickness 3mm, base plate dimensions (L X B X T)-200mm X 200mm X 12mm with 500 mm long single/double arm and foundation bolts etc. as per specifications mentioned in explanatory note.

Supply of Insulated Cable Connector 4-way Set and SP 6A MCB, Type B- 01 No. along with Bakelite sheet for Octagonal Pole.

Fixing and Commissioning of 5M HDG (Hot Numbers Dip Galvanized) Octagonal Pole, top dia. 70mm, bottom dia. 130mm, sheet thickness 3mm, base plate dimensions (L X B X T)- 200mm X 200mm X 12mm with 500 mm long single/double arm and foundation bolts etc. with RCC foundation works to complete the job as per specifications mentioned in explanatory note.

Supply of LED 45 watt or higher wattage Numbers street light with Colour Rendering Index (CRI) >=70, confirming IP66 as per specifications mentioned in explanatory note.

Fixing and commissioning of LED 45 watt or Numbers higher wattage street light including wiring of light from loop box.

Handling, cutting (to required size) and Each transportation of Rail Pole to work site including painting of pole and erection.

Excavation of pit size 750 x 750 x 1828 mm cum or appropriate size as per site requirement in any kind of soil as available at site and erection of Rail pole/PSC pole, guy set etc. And filling up with 1:3:6 cement concrete including the length of muffing of base.

Fabrication and erection for 4-Pole/ 2-Pole MT structure including supply of MS channels of required size, angle and all small parts like G.I. Clamp, nuts, bolts etc. as required by consignee depending upon work requirements excluding Rail Pole/ PSC pole. (Pole will be supplied by Rly.) and all accessories to complete the work in all respect.

Supply of Anti Climbing Device made of GI Kg barbed wire, Clamping arrangement etc. (2 Kg Per Support) or as per site requirement to complete the job. PROJECT-KGP-ELECTRICAL/SOUTH EASTERN RLY

Supply of 11KV 400 Amps A.B Switch Numbers complete with expulsion type drop out fuse and lighting arrestor.

Installation of 11KV 400 Amps A.B Switch Numbers complete with expulsion type drop out fuse and lighting arrestor.

Supply of stations.

Erection of stations.

Supply of stations.

Erection of fencing uprights at switching MT stations.

Supply & spreading of Ballast/Gravel in the Sqm Switch Yard.

Supply, laying, fixing and commissioning of Metre 25 x 3mm GI strip as and where required extra for earth connection between earth electrode and main switch/ DB/ Electric pole etc. as per site supervisor's instruction, including connection & termination with stainless steel nut, bolt, spring, washer etc. as required.

Supply of Earthing arrangement with supply Each of Hot Dip Galvanized (HDG) earth cone and all other requisite materials as per CEE/GRC's Drg. No.CEE/G/A3/P-150, Alt.1 including sump box, cover with salt and charcoal etc. as per site supervisor's instruction. Cost includes supply of all materials mentioned in the Drawing including 02 meters 25 x 3mm GI strip for connection from earth electrode pipe to light pole /Rail pole etc.

Erection of Earthing arrangement with Each erection of Hot Dip Galvanized (HDG) earth cone and all other requisite materials as per CEE/GRC's Drg. No.CEE/G/A3/P-150, Alt.1 including sump box, cover with salt and charcoal etc. as per site supervisor's instruction. Cost includes erection of all materials mentioned in the Drawing including 02 meters 25 x 3mm GI strip for connection from earth electrode pipe to light pole /Rail pole etc.

Preparation and Submission of Drawings of Job Wiring Lay Out, Cable Route Lay out, Single Line Diagram of Power Distribution System etc. related to this work. The cost also includes supply of 11 copies of drawing. Total 12101490.39