REPAIR TO ALUMINIUM JOINERY WOODEN DOORS WINDOWS WIRE MESH CURTAIN RODS CUP BOARDS ETC TO CERTAIN PERMANENT BUILDINGS AT NORTH CAMP AT ATS BELGAVI

Amount

Taking down wooden / PVC chowkats or frames not exceeding 1.5 sqm each (without taking off shutter from the frame) including making good disturbed surfaces to match with the adjoining surfaces all as specified and as directed.

All as per item No 1 here in before but exceeding 1.50 Sqm but not exceeding 4.00 Sqm.

Taking down shutter of any description not exceeding 1.00 Sqm each including making good disturbed surfaces all as specified and as directed

Taking down shutter of any description exceeding 1.00 Sqm but not exceeding 2.00sqm each including making good disturbed surfaces all as specified and as directed

Taking down and refixing of old shutters of any description not exc 1 sq.m in the same opening including easing, adjusting and also refixing builders hardware as required including renewal of unserviceable screws, etc., all as specified and directed.

Taking down and refixing of old shutters of any description exc 1 sq.m and not exc 2 sq m in the same opening including easing, adjusting and also refixing builders hardware as required including renewal of unserviceable screws, etc., all as specified and directed.

Cutting holes in brick / PCC block / Stone walls built in cement mortar for inserting holdfasts or lugs to a depth exceedng half brick but not exceeding one brick from the face of jamb and making good dismantled portion in cement concrete 1:2:4 (type B-0) or CM 1:3 as required all as specified and as directed.

M & L for Mild steel work a in hold fast, wall ties,bands, straps or similar small articles conforming to Fe-290 Gde E-165 etc.complete all as specified and directed.

M & L Second class hardwood chowkats and frames Plain, solid, straight, wrought, framed rebated on the solid, rounded or chamfered, put together with glue, pinned at joints complete all as specified and as directed

M & L factory made Plain framed, panelled shutter (two panel), second class hardwood 35mm thick, with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated all as specified and as directed.

M & L Second class hard wood Glazed and skeleton shutters, 35 mm thick, open rebated and prepared to receive glass, gauze, wire mesh etc., (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and as directed.

M & L Second class hard wood Glazed and skeleton shutters, 30 mm thick, open rebated and prepared to receive glass, gauze, wire mesh etc., (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and as directed.

M & L Flush shutters 30mm thick, solid core construction, with block board core and plywood face panels, commercial type on both sides all as specified and as directed.

M & L Veneered decorative plywood 12mm thick, grade 1 (with BWR resin) with decorative face veneers on both faces; fixed with screws to timber frame work all as specified and directed.

M & L second class hardwood clean sawn battens at 15 cm centres, cross sectional area exc 5sqcm but not exc 15sqcm complete all as specified and directed

M & L Prelaminated particle board, interior grade,prelaminated both sides with decorative choice lamination, fixed with screws to timber/ aluminium frame work all as specified and directed.

S & F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube in opening as per site requirement complete all as specified and directed

S & F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, with particle board core & fixing in frame at site as per specification complete all as specified and directed.

M & L two coats of synthetic enamel paint over a coat of pink primer on new wooden surfaces of any description over 10cm width or girth including necesssary preparation of surfaces all as specified and directed

M & L Second class hardwood small fittings such as brackets of any type, latch and hinge blocks, shapped door and window stops and the like, including all necessary labours; articles not exc 200 cu. cm each complete all as specified and as directed.

S & F Mild Steel butt hinges 100 mm long, medium weight cold rolled all as specified and directed.

S & F Mild Steel butt hinges 75 mm long, medium weight cold rolled all as specified and directed.

S & F Aluminium handle, cast type 150 mm long, anodized all as specified and directed.

S & F Aluminium handle, cast type 100 mm long, anodized all as specified and directed.

S & F Aluminium alloy anodized sliding door bolts 300 mm long with hasp and staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolt and sliding bolts of extruded section or cast aluminium alloy all as specified and directed.

S & F Aluminium anodized, barrel tower bolt 200 mm long of extruded section all as specified and directed.

S & F Aluminium anodized, barrel tower bolt 100 mm long of extruded section all as specified and directed.

S & F Mortice lock brass 2 lever, vertical type, size 100 m all as specified and directed.

S & F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, overall length of cover plate 140mm fixed in floor as specified and directed.

S & F in repairs Aluminium handle 150mm, Extruded aluminium alloy handles, abricated type, anodised all as specified and directed.

S & F in repairs Aluminium handle 100mm,Extruded aluminium alloy handles, abricated type, anodised all as specified and directed.

S & F in repairs Aluminium alloy anodized sliding door bolts 300 mm long with hasp and staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolt and sliding bolts of extruded section or cast aluminium alloy all as specified and directed.

S & F in repairs Aluminium anodized, barrel tower bolt 200 mm long of extruded section all as specified and directed.

S & F in repairs Aluminium anodized, barrel tower bolt 100 mm long of extruded section all as specified and directed.

S & F in repairs floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, overall length of cover plate 140mm fixed in floor as specified and directed.

S & F Mild steel 300mm long, ordinary rat tail rod pattern springs including roller and roller plate, fixed in repairs, complete all as specified and directed.

S & F in repairs solid PVC side hung shutter for kitchen cabinet purpose, 12mm thick PVC pre-laminate sheet including necessary frame work complete all as specified and directed.

S & F in repairs Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed all as specified and directed.

S & F in repairs Extruded brass handles 150mm size fabricated type polished all as specified and directed.

S & F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised, 30mm width of flaps including taking down old piano hinges all as specified and directed.

S & F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperature 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S & F in repairs stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperature 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S & F Steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and directed.

S & F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded all as specified and directed.

S & F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded all as specified and directed.

M &L preparing new or previously untreated steel or iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer all as directed.

M & L Plain fillets, 2nd class hardwood wrought, bullnosed, splayed, chamfered or rounded on one edge or face in section etc exceeding 3 and not exceeding 6 sq cm secured with screws all as specified and directed.

M & L Plain fillets, 2nd class hardwood wrought, bullnosed, splayed, chamfered or rounded on one edge or face in section etc exceeding 13 and not exceeding 25 sq cm secured with screws all as specified and directed.

Supply and fixing in repairs Casement stays, size 250mm, with hinged joint and two plates, with studs complete all as specified and as directed.

Supply and fixing in repairs aluminium (Die cast) body door closer, hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 60 to 80 kg complete all as specified and as directed.

Supply and fixing in repairs double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty including taking down of old unservicable floor spring complete all as specified and directed.

M & L for framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

S & F in repairs Plywood 12mm thick grade BWR, type BB, fixed with screws to timber frame work complete all as specified and directed.

S & F sheet glass 4mm thick, ordinary quality and glazing with wooden beading, not exceeding 0.50 Sqm in each pane complete all as specified and directed.

S & F sheet glass 4mm thick, ordinary quality and glazing with wooden beading, not exceeding 0.50 Sqm in each pane including hacking out old broken glass complete all as specified and directed.

S & F sheet glass 4mm thick, ordinary quality and glazing with wooden beading, exceeding 0.50 Sqm in each pane including hacking out old broken glass complete all as specified and directed.

S & F Figured glass 4mm thick, pin head type and glazing with wooden beading or oil putty with glazing clips not exceeding 0.50 Sqm in each pane complete all as specified and directed.

Securing glass of any description in existing wooden frames glazed with putty/beads including removing loose or decayed putty/beads, painting/oiling one coat on rebates, grooves, reputtying and painting/oiling puttied surface to match existing work (New length of frame reputtied shall be measured)

All as per item No 58 herein before but metal frame.

M & L replacement of mild steel hinges of size 75/100mm by means of welding to existing window/door frame/ chowkhats for proper operation of window/ door shutter all as specified and directed.

Supply and fixing in repairs decorative curtain rod 25 mm dia, powder coated all as specified and as directed.

Supply and fixing in repairs powder coated decorative curtain brackets, stops, rollers all as specified and as directed.

Taking down carefully aluminum door shutter of size exceeding 1.5 Sqm and not exceeding 4 Sqm, opening floor spring assembly over hauling and refixing in same position with new screws, replacing necessary joining cleats, glazing clips, snap beadings, rubber neoprene packing etc., and fixing the door shutter in position with functioning condition all as directed.

S & F Pressed steel frames for doors 125x60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified & directed

Supply and fixing powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed

S & Fpowder coated aluminium door shutters, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed.

S & F Anodised aluminium window and ventilator shutters, side or top hung type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified all as specified and directed.

S & F sheet glass 4.8 mm thick, ordinary quality fixed to aluminum frame work and glazing with suitable size aluminum anodised beading exceeding 0.5 Sqm in each pane including hacking out old broken glass all as specified and directed.

S & F figured glass 4 mm thick, pin head type, glazing with oil putty clips or wooden beading not exceeding 0.5 Sqm in each pane all as specified and directed.

S & F Solar control film 50 micron reflective type sticked to glass panes as per instructions of manufacturers all as specified and directed.

PURVIK CONSTRUCTIONS

RAJENDRA KRISHNA SARAF

Raghu M Contractor