Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹30.0 LAccepted-AOC 640 MAIN ROAD BABINA CANTT JHANSI UP 284401 | JHANSI | JHANSI | UP | 284401 | L1 | Accepted-AOC Being a L1 bidder | |
| 2 | L2₹34.2 L+₹3.1 L (9.79%)Rejected-Finance 763 MAIN ROAD BABINA CANTT JHANSI UP 284401 | JHANSI | JHANSI | UTTAR PRADESH | 284401 | L2 | Rejected-Finance Other than
lowest
bidder | |
| 3 | L3₹35.4 L+₹4.2 L (13.6%)Rejected-Finance 630 MAIN ROAD BABINA CANTT 284401 TESIL DISTT JHANSI UP | BABINA CANTT | JHANSI | UP | 284401 | L3 | Rejected-Finance Other than
lowest
bidder |
Tender Value
₹44.7 L
EMD Value
₹89,500
Closing Date
16 Dec 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE BABINA
GE BABINA CANTT 284401
PROVN OF CERTAIN SPECIAL REPAIR WORK AT AGE B/R-II AND AGE E/M UNDER GE BABINA CANT
2023_MES_628033_1
8181/E8
Open Tender
Civil Works
Item Rate
180 days
GE BABINA
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
GE BABINA
₹89,500
Yes
17 Feb 2024
11 Nov 2023
18 Dec 2023
11 Nov 2023
16 Dec 2023
2 Dec 2023
Amount
Dismantling of Asbestos cement ( corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed.
Dismantling of plain or corrugated steel sheeting, any guage, thickness includidng nainital or similar pattern in roof covering complete all as specified and directed.
S & F Pre- painted galvalume aluminum zink coating GI based corrugated steel 0.50mm thick and AZ- 150 of an colour having tensile strength of 550mpa as in roof covering/cladeding to wall, fixed with self tapping screw complete all as specified and directed.
S & F Pre- painted galvalume aluminum zink coating GI based plain steel 0.50mm thick and AZ- 150 of an colour having tensile strength of 550mpa as in roof covering/cladeding to wall, fixed with self tapping screw complete all as specified and directed.
Dismantling timber scantling framed/unframed work 40 sq. cm and over in section in any position complete all as specified and as directed.
S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.Fe-290 Gde E-165 complete all as specified and directed.
M&L mild steel work in hand rails, half round or other steel section or core for Wind ties for roof including securing bolts, post and struts cutting tops to shape as directed, drilling holes, notching for wire etc and similar work confirming to Fe-290 Gde E-165 complete all as specified and directed.
M&L for preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer, over 10cm in width or girth,not otherwise described complete all as specified and directed.
Dismantling wall and ceiling boards (fibre, pump, insulation etc,) or insulation boards of any thickness including cover filletscomplete all as specified and directed.
M&L for aluminium anodised snap grid frame work of the following (a) Main Tee section 36.5x25x1.4mm size (wt not less than 0.24Kg/RM) (b) Section alongwith wall angle of size 40x25x2mm size (wt not less than 0.36Kg/RM) (c) Cross Tee section 23.5x26.4x1.4mm size (wt not less than 0.191Kg/RM) (d) Snap grid shall be fixed to G.I Flat 40 x 3mm supporting hangers consisting of 4mm dia G.I rod n.exc 1.20m length with J bolts nuts and washer etc as per manufacture instructions & complete all as directed.
M&L for 4mm thick high pressure steam cured non asbestos fiber cement design board of size 600mm x 600mm fixing in ceiling complete all as specified and diredted. Note : (i) Aluminium snap grid, and false ceiling board material shall be verified by GE before incorporation in the work. (ii) Paid Vr. shall be verified of genuineness. The payment will be released after complying of above points.
Demolition of Brickwork of stone/boulder masonry, build in cement mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articlesl etc complete all as specified and as directed.
M&L brick work with fly ash bricks (FASB) conferming to IS 12894, of strength M-10 straight or curved on plan exc 6m mean radious built cement mortar 1:4 complete all as specified and as directed.
M&L for PCC 1:2:4 type B0 (using 12.5mm graded aggregate) in copings, kerbs, channels, water through and the like including weathering, slightly rounded or chamfered angles and throating as directed chamfered necessary for work complete all as specified and directed.
Taking down cement plaster from brick or stone walls etc incl racking out joints hacking for key and scrabbing down with water etc complete all as specified and as directed.
M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:6, and finishing the surface even and smooth without using extra cement complete all as specified and directed.
Demolition of cement concrete (unreinforced ) in ground floor and paving n,exc 15cm thickness below or above ground level) complete all as specified and as directed
M&L for 75mm thick cement concrete 1:3:6 type C-2 (40mm graded aggregate) as in plinth protection /path laid in alternate penel, joint filled with bitumen 85/25, surface finished even and smooth without using extra cement complete all as specified and directed. Note:- The cost of materials for forming and filling joints deemed to be included in the unit rate quoted by the tenderer.
Dismantling floor hearth wall tiling including cement mortar bedding but not backing and removing serviceable meterial to store complete all as specified and directed.
M&L for coloured joint free ceramic tiles 7 to 8 mm thick (square / rectengular) area of each tile exceeding 0.18 sqm but not exc 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match to floor, over and including 15mm thick screed bed or bedding layer in cementy mortar 1:6 etc complete all as specified and directed.
M&L for coloured joint free ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm in skirting/dado etc. set and jointed in neat cement slurry and pointed in colour cement to match to floor, over and incl 10mm thick rendering on wall or conc surfaces in cement mortar 1:4 ,complete all as specified and as directed.
M&L for glazed coloured ceramic tiles 300x600x7mm thick for work on vertical surface such as skirting, dado, set & jointed in cement slurry and pointed in white or coloured cement to match the existing wall surfaces, over and incl 10mm thick rendering in cement mortar 1:4 etc complete all as specified and directed.
M & L for complete remoal of existing treatment from wall and appying two coat of oil bound distemper with roller over including prepration of surface complete all as specified and as directed.
M&L for preparation of new plastered surfaces of wall and applying two coat of cement base paint complete all as specified and as directed.
M&L for preparation of new plastered surfaces of wall and applying a coat of JK/Birla wall care putty complete all as specified and as directed.
Taking down chowkhat or frames with shutters (without taking off shutters from the frame) not exe 1.5 Sqm each etc complete all as specified and directed.
Taking down chowkhat or frames with shutters (without taking off shutters from the frame) exe 1.5 Sqm but not exe 4.0 Sqm each etc complete all as specified and directed.
S&F powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc.fixed in position by means of steel screw and patent rawl/plugs/bolts/hold fast of suitable size complete all as specified and directed.
S&F powder coated aluminium sliding windows with fly proof shutters having top rail of section 41mmx20mmx1.6mm thick, bottom rail of section 41x20x1.6mm thick ,vertical style of section 38x20x1.6mm thick including necessery jointing cleats ,glazing clips, rubber packing ,snap beading, screws handle and locking system etc, fitted including using standard aluminium section including necessery fittings and fixtures complete all as specified and directed.
S&F powder coated aluminium sliding windows and ventilator shutters, with sash bar, half portion openable for ventilation purposes including fixing of wire mesh outside with fastening arrangement, aluminium section weighing 0.55Kg/m including necessary jointing cleats ,glazing clips, rubber packing ,anodised aluminium snap beading, screws, handle and locking system etc, fitted including using standard aluminium section including necessery fittings and fixtures complete all as specified and directed.
S&F Pressed steel frames 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., including one shop coat of red oxide primer including cutting holes and making good in PCC 1:2:4 type B1 using 20mm graded stone aggregate complete all as specified and as directed. Note:- 10mm deformed bar shall be provided in bottom and PCC as directed and specified will be provided in hollow frame.
S&F Pressed steel frames 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., including one shop coat of red oxide primer including cutting holes and making good in PCC 1:2:4 type B1 using 20mm graded stone aggregate complete all as specified and as directed. Note:- 10mm deformed bar shall be provided in bottom and PCC as directed and specified will be provided in hollow frame.
S&F 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides etc complete all as specified and directed.
S&F locally made 30 mm thick IInd class HW glazed & skeleton shutters open rebated and prepared to receive glass gauge etc. (without sash bars) edges of framing plain chamfered or rounded fitted with cut & mitered beads for security glass/gauge etc. size of members of shutter as specified in SSR Pt I sec 8 Cl 8.20 (a), divided into squares with plain chamfered rounded, mitered and rebated sash bars etc complete all as specified and directed.
S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck in side with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail and bottom rail,paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement all as directed and specified by Engineer-in-Charge.
S & F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube etc complete complete all as specified and as directed.
S&F mild steel flat iron of size 25x3 mm as in hold fasts and clamps & similar small articles confirming to Fe-410-W or Fe-290 complete all as specified and as directed by the Engr-in-Charge.
S&F Stainlesss steel wire cloth, 0.36mm nominal dia of wire and avg width of aperture 1.40mm fixed with stainless steel wire staples etc complete all as specified and directed.
M&L two coat synthetic enamel paint over one coat of pink primer on new wooden surface of any description not otherwise described over 10 cm width or girth etc complete all as specified and directed.
S&F but hinges extruded aluminium alloy with galvanised mild steel hing pin, anodised and fixed, type C-21 100 mm size with PVC doors etc complete all as specified and directed.
S&F aluminium anodised barrel tower bolts of extruded section and fixed fixed 200 mm long etc complete all as specified and directed.
S&F aluminum handles cast type anodized 150 mm size etc complete all as specified and directed.
S&F mild steel, 300 mm ordinary rat tail rod pattern door spring including roller and roller plate etc complete all as specified and directed.
S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast- aluminium alloy complete all as specified and directed.
S&F framed work such as grills, gratings, etc, with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders ; framed balusters; walk ways; railings; framework of watertanks and similar work conforming to Fe 290. Gde-E-165 complete all as specified and directed.
S&F figured glass ,pin head type 3mm thick and glazing with oil putty in square n.exc 0.5sqm in each pane complete all as specified and as directed.
S&F for 4.8mm to 5mm thick tinted Sheet glass of size exc. 0.5 Sq. m each pane, ordinary quality duly covered with tinted solar control film 25 micron, including jointing cleats, glazing clips, rubber packing, aluminium anodised snap beading, screws,each pane after and including hacking out broken glass from wooden/metal surfaces complete all as specified and as directed by the Engr-in-Charge.
S&F fancy type Stainless steel conduit curtain rod 32mm dia with fancy knob, ends and brackets complete all as specified and as directed by the Engineer-in-charge.
S&F in repairs vitreous china squatting pan 'ORISSA PATTERN' size 580mm x 440mm 'white with integral foot rest (excluding flushing cistern and flush pipe ) with 'P' or 'S' trap, front or back inlet including connection to trap and to flushing pipe anti syphonage pipe etc complete all as specified and as directed
S&F in repairs 10 ltr capacity PVC low level flushing cistern white, ISI marked make as specified with inlet, float valve and handle including breacket with 32mm dia PVC pipe 600mm long complete all as specified and directed
S & F in repair Vitreous China Ware Wash hand basin white, flat back, size 550 x 400 mm size (flat back or angle back type) including cutting for and pinning ends of brackets or erecting stand and waste pipe complete all as specified and as directed.
Taking down 15 mm bore steel tubing and connection including cleaning and refixing or removal to store etc complete all as specified and directed.
Taking down 20 mm bore steel tubing and connection including cleaning and refixing or removal to store etc complete all as specified and directed.
S&F 15 mm bore galvanised mild steel tubing of medium grade with all fittings & fixed complete to walls & ceiling or laid in trenches/floors etc complete all as specified and directed.
S&F 20 mm bore galvanised mild steel tubing of medium grade with all fittings & fixed complete to walls & ceiling or laid in trenches/floors etc complete all as specified and directed.
S & F 1000 litre capacity of rotational moulded polyethylene water storage tank multilayered construction, ISI marked of make specified (cylindrical vertical with closed top) hoisted and fixed in position including S&F 20 mm dia GI pipe medium grade washout pipe 450 mm long with plug and 20 mm dia GI pipe medium grade overflow pipe 600 mm long with fittings complete all as specified in SSR Part-I complete all as specified and as directed.
S&F in repair 20 mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed. .(Minimum weight 15mm-142gms/ 20mm-210 gms./25mm-455gms/ 40mm etc complete all as specified and directed.
S&F PVC connection 15mm dia with Brass nuts of length 450mm etc complete all as specified and directed.
S&F brass CP mixer Pillar Tap fency type 15mm dia bore mixing hot & cold water for wash hand basin screwed down for iron pipe and fixed.
S&F in repair 15 mm bore angle cock long thread fancy type chromium plated cast copper alloy, screwed down high pressure with crutch or butter fly handle screwed both and for iron pipe or for union and fixed etc complete all as specified and directed.
S&F in repair 15 mm bore stop cock long thread (concealed type) fancy type chromium plated cast copper alloy, screwed down high pressure with crutch or butter fly handle screwed both and for iron pipe or for union and fixed etc complete all as specified and directed.
S&F in repair 125 mm Brass chromium plated shower rose with or without swivel joints, any size, including fixing of steel pipe or union complete all as specified and directed.
S&F in repair 15 mm bore bib taps long body chromium plated fancy type, cast copper alloy with crutch or butter fly handle screwed down screwed for iron pipe or for unions and fixed 15 mm bore etc complete all as specified and directed.
Demolition and breaking 150mm dia drain pipe (salt glazed stoneware) set in cement mortar including packing under and haunching against side of pipe complete all as specified and directed.
M&L for 150mm bore reinforcement concrete pipes, class NP-3 laid and jointed complete with collers complete all as specified and directed.
M & L cement concrete bed to 150mm dia drain pipe including packing under and haunching against side of pipe after they are laid and tested in cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate complete all as specified and directed.
S &F of 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors or wall including taking out complete all as specified and directed.
S &F of 75mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors or wall including taking out complete all as specified and directed.
S&F PVC (SWR) bends any radius 110mm bore complete all as specified and directed.
S&F PVC (SWR) bends any radius 75mm bore complete all as specified and directed.
S&F PVC (SWR) junction single, (single T) equal or unequal 75mm bore with access door omplete all as specified and directed.
S&F PVC (SWR) junction single, (single T) equal or unequal 110mm bore with access door omplete all as specified and directed.
S&F PVC (SWR) vent cowl 110mm bore omplete all as specified and directed.
S&F PVC (SWR) branch piece (single Y) equal or unequal 110mm bore with access door omplete all as specified and directed.
S&F PVC (SWR) branch piece (single Y) equal or unequal 75mm bore with access door omplete all as specified and directed.
S&F in repair PVC floor trap outlet dia 75mm with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and as directed.
S&F galvanized mild steel wire cloth 0.56 mm nominal dia of wire and avg width of aperture 1.4 mm fixed with tinned tacks or galvanized wire staples etc complete all as specified and directed.
Taking down, erection and re fixing of roof trusses (framed), trusses, purlins, crane, guntries, rails and fastening and heavy bracket framing (Beam, tee, angle, channel or flat section) including distance pieces, cleat etc complete all as specified and as directed
S & F 3 mm thick sheet glass, Ordinary quality and glazing with putty in square n. exc 0.5 Sqm in each pane complete all as specified and as directed.
S&F of 35mm thick 2nd class Hard wood paneled door shutter factory made (two panel) with lock rail andpanel of 9mm thick BWP commercial ply wood, the size of rail and stile is as per IS 1003 (Part-I), Kiln seasoned and chemically pressure treated complete all as specified and as directed.
M&L, preparing for new steel surfaces and applying two coats of synthetic enamel paint over one coat of rex oxide primer over 10 cm width or girth complete all as specified and as directed.
M&L for machine cut kota stone slab flooring 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete, over and including 15mm thick screed bed or bedding layer in cement mortar 1:6, etc complete all as specified and directed.
M&L for machine cut kota stone slab 15-18 mm thick, in riser of steps, skirting, dado and pillar laid over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete,incl 10mm thick rendering on wall or conc surfaces in cement mortar 1:4 ,complete all as specified and as directed.
M&L for plain cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in filling & mass concrete in floor complete all as specified and as directed by Engineer -in-charge.
M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-40 grade and fixed with grey cement and pigment over and including 50mm thick sand cussion including watering complete all as specified and directed.
S & F in repair Vitreous China urinal, half stall type, flat back small (SPECIAL)) with grating and union for discharge pipe, push tap (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and directed.
S&Furinal spreader of PTMT any colour for fixing with 15mm dia pipe complete all as specified and as directed.
S & F brass Chromium Plated tubular Towel rail 20mm dia D type, 60cm long between flanges complete all as specified and directed
S&F in repair soap dish chromium plated 150x150mm size heavy duty fixed to wall with brass chromium plated screws etc complete all as specified and as directed.
S&F framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and as directed.
M&L for roughly squared stone lintels hammer dressed on face and soffits, hoisted, set and pointed in lime mortar 1:3 or cement mortar 1:6 complete, n exc 3m in length complete all as specified and as directed.
M & L for preparation of new plastered surfaces of wall and appying two coat of oil bound distemper over and including 1mm thick putty as per manufacturerer instruction complete all as specified and as directed.
M & L for complete removal of existing treatment from surface of wall and applying two coats of cement base pain over a coat of alkali registance primer complete all as specified and as directed by the Engineer-in-Charge
Cutting holes in brick walls built in cement mortar for inserting hold fasts and making good dismantled portion in CM 1:3 or cement conc 1:2:4 type B1 as required exc half brick but not exc full brick wall complete all as specified and as directed.
S&F, 150mm floor door stopper of aluminium alloy body and tongue, anodised,with hard drawn steel spring, fixed in floor complete all as specified and as directed.
S &F in repair steel windows with Z section, side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.
S &F in repair steel windows with Z section, side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with out glazing bars, dovetailed or welded complete all as specified and directed.
M&L for moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed.
S&F steel gate ornamental type including grill work, hold fast, pintal hinges, stoppers, running rails, bushes, CI decorative pieces, locking arrangement etc including taking down complete all as specified and directed. Note:-Design of steel gate will be approved before placing order to manufacturere.
Taking down carefully unserviceable aluminium point wiring (light, fan, socket or power) complete with fitting such as switches, ceiling roses, lamp holders, sockets, fan regulators, wooden terminal box plastic laminated sheet cover from TW battens including TW batten or drawing from existing conduit removing including TW batten all as specified and as directed by Engr-in-Charge.
Taking down carefully existing wooden board , Main switch, MCB DB boxes with MCBs, sheet metal boxes, cut out, etc of any size any capacity from boards complete all as specified and as directed.
Taking down carefully sub main wiring / service connection twin core from wall / LT pole of any size of Aluminum with wooden batten and or through rigid conduit including GI wire and making good the disturbed surfaces of walls, roofs, floors etc complete all as specified and as directed.
M & L for concealed point wiring for one light point controlled by one switch complete with PVC insulated and unsheathed flame retardant low smoke and halogen ( FRLSH ) cable of 1.5 sqmm (nominal area) with stranded copper conductor single core 1100 volts grade in and including rigid PVC conduit not less than 20 mm dia, clip, with MS terminal boxes (not less than 1.6 mm thick) and painted with one coat of red oxide primer all around and two coats of black bituminous paint from out side and two coat of aluminum paint from in side including common earth dolly with 3 mm thick plastic laminated sheet top cover of approved make and colour including 1.5 sqmm green stranded copper conductor as continuous earth wire with lugs complete including cutting necessary chases on wall / ceiling surfaces for drawing of conduit & cables as required and making good disturbed surfaces of walls with CM 1:3:6 and matching with the existing surfaces including colour washing all as specified and as directed .
Description same as per item No 103 above but one fan point controlled by one switch & regulator.
Description same as per item No 103 above but One 3/5 pin 5 Amp socket outlet point controlled by one switch on same board.
Description same as per item No 103 above but One 3/5 pin 5 Amp socket outlet point controlled by one switch on independent board.
Description all as per item No 103 above but using 2.5 sqmm single core multi stranded copper conductor PVC insulated and unsheathed flame retardant low smoke and halogen ( FRLSH ) cable for 3/6 pin 15 Amp socket outlet controlled by one switch on independent board with 1.5 sqmm green stranded copper conductor as continuous earth wire with lugs complete all as specified and as directed.
S&F switch piano flush button type 5 Amp single pole one way complete all as specified and as directed.
S&F socket outlet 2in1, 3 pin, 5 Amp flush type complete all as specified and as directed.
S&F switch piano flush button type 15 Amp single pole one way complete all as specified and as directed.
S&F socket outlet 2in1, 3 pin, 5 Amp and 15 Amp flush type complete all as specified and as directed.
S&F ceiling rose,surface bakelite 63 x50mm three terminals complete all as specified and as directed.
S & F Sheet metal enclosure double door concealed suitable for distribution board when MCB to be used having 100 Amp rated bus bar 8 ways 240 volts complete all as specified and as directed.
S&F MCB single pole and neutral 40/63 Amp 240 V ,10KA , 'C' series, connected with copper lugs complete all as specified and as directed.
S&F Rigid non-metallic PVC conduit not less than 25mm dia exclusive of boxes (junction/terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, locknuts, saddles, pipe hooks etc. complete all as specified and as directed.
Supplying and laying un-reinforced precast concrete cable cover, class LV type 1 flat size 250x150x40mm peak, laid perpendicular to the axis of cable in trenches complete all as specified and as directed.
Excavation in trenches not exc 1.5m wide and n. exc 1.5m in depth for foundation etc not exc 10 Sqm on plan and not exc 1.5m in depth and getting out in any type of soil complete all as specified and as directed.
M&L returning filling in including spreading levelling, watering and well ramming in layers n.exc. 25mm in any type of soil complete all as specified and as directed.
Removing excavated at a level n.exc 50m and deposited where directed at a level n exc 1.5m above the starting point complete all as specified and as directed.
S&F ceiling fan complete with blades, down rods, electronic regulator and accessories, 230V, 1200mm sweep. Minimum air delivery 210CFM with service value 6.00BEE. Five star rated with squirrel cage induction motor, copper binding complete all as specified and as directed.
Supply and lay river bed sand free from sharp materialsa for Sand cushioning for cables 8 cm below the cable and 15 cm above the cable all as specified and directed .
Supply and laying GI pipe 50mm bore "LIGHT GRADE" in trenches, under floors, roads, along poles for protection of cables, including sealing ends complete all as specified and as directed.
S&F MCB single pole 6 to 32Amps 240 V,10KA, 'C' series, connected with copper lugs complete all as specified and as directed.
S&F MCCB 4 pole, 415V, AC , 3 phase, 50 HZ, breaking capacity 16 KA with fixed thermal and fixed magnetic setting of capacity 125 Amps 'C' series complete all as specified and as directed.
S & F Lamp holder,PVC/Urea type with back plate suitable for batten fittings complete all as specified as directed
S & F delux Fan Regulator electronic rotary, step type 240 Volt 50 Hz, complete all as specified as directed.
S&F LED security/street light fittings1x35W LED 5700K energy saving and envoiremental frendly long life versatile pressure die cast aluminium housing with acrylic cover as diffuser with IP 66 protection and impact resistance of IK 07 luminaire with high power LED as light siurce and electronic driver suitable for pole dia 35mm including 35mm dia light grade tube bracket, bend to shape 1.80m long with two numbers clamp of size 50mmx6mm with nuts, bolts, washers etc including connection with 1.5Sqmm two single core PVC insulated and PVC sheathed cable stranded copper conductor upto ceiling rose and fixing on wall /pole complete as ditrected by Engineer in Charge. Make: Bajaj Cat Part No BRLEP20WLEDWH or equivalent make as specified in Appendix B to particular specification.
S & F 9W/10W LED retrofit lamp B-22 holder base with polycorbonate body and aluminium heat sink complete all as specified as directed. Make C&S Cat No LTHPLEDLAMP7W/B22 or equivalent make as specified in Appndx 'B' to PS .
M&L for sub main wiring with 2 run of single core PVC insulated and PVC Unsheathed, multistranded copper condutor of nominal area 6 sqmm FRLS, 1100 Volts grade cable drawn into conduit (Existing / new) including all fittings and one run of PVC insulated and PVC unsheathed, multistranded copper conductor of nominal area 6 sqmm FRLS 1100 volts grade cable continuous earth wire of green colour code complete all as specified and as directed Note:- (a) Two runs of 6 sqmm cable and one run of 6 Sqmm cable as earth lead with conduit shall be measured as one unit length for payment. (b) New conduit and conduit accossories shall be measured separately.
Supply and fixing in repair 20W LED 6000k Decorative ultra slim linear LED fitting fixture with extruded polycarbonate ,environmental friendly ,energy efficentinterated driver and 22watts lamp fitted including wiring upto and terminal into ceiling rose complete all as specified and directed by Engr-in- Charge.
Supply,laying connecting and testing of cable XLPE insulated,screened,PVC bedded galvanized steel strip or wire armoured electric power cable (heavy duty) 1100 V grade with multi stranded aluminium conductor of size 16 sqmm 4 core as per IS 7092 Pt-I complete all as specified and as directed.
S&F TPN DB-DPX 125 MCCB DBs 4 way single door with provision for DPX 125 MCCB and as incomer and SP/TP MCBs as outgoing Nos of modules DPX 125+12, including 125 Amp MCCB complete all as specified and directed.
M&L for earthing complete with galvanised steel earth plate electrode of size 600 mm x 600 mm x 6 mm thick weithing not less than 17.5 Kg buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below ground level, connected to galvanized earth lead wire 4.00 mm dia by means of bolts nuts check nuts & washers of galvanized iron or steel , procteded by GI pipe 15 mm bore( light grade) and watering pipe 20 mm bore GI pipe (light grade) and chamber of pcc 1:4:8 type D2 using 40 mm graded stone aggregate and coping shall be in PCC 1:3:6 type C1 using 20mm graded stone agg. 50 mm thick cover of RCC 1:2:4 type B1 using 20 mm graded stone agg. reinforced with 8 mm dia MS tor bar @ 80 mm c/c both ways including excvation and earth work and removal of surplus soil complete all as shown in electrical plate no 3 of SSR PT 1, 2009 with charcoal dust and salt complete and earth lead connected to earthing test point (up to main switches, DBs) complete all as specified & testing on completion. NOTE:- (I) item includes the cost of 7.5 mtr length GI pipe for protection for GI earth wire. (ii) item rates includes the cost of 7.5 mtr earth lead GI earth wire. (iii) PCC pit shall be provided at least 500mm away from the pit and not on the earth pit itself and the extra cost of additional length of watering pipe,bends,elbow etc shall be deemed included in the unit rate.
Ms Vinay constructions
R.P ASSOCIATES
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .